根据实际电路版修改对应引脚，LED KEY LCD 正常运行

Projects/MDK-ARM/DebugConfig/Template_STM32F103C8_1.0.0.dbgconf

@@ -1,36 +0,0 @@
-// File: STM32F101_102_103_105_107.dbgconf
-// Version: 1.0.0
-// Note: refer to STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx Reference manual (RM0008)
-//                STM32F101xx STM32F102xx STM32F103xx STM32F105xx STM32F107xx datasheets
-
-// <<< Use Configuration Wizard in Context Menu >>>
-
-// <h> Debug MCU configuration register (DBGMCU_CR)
-//                                   <i> Reserved bits must be kept at reset value
-//   <o.30> DBG_TIM11_STOP           <i> TIM11 counter stopped when core is halted
-//   <o.29> DBG_TIM10_STOP           <i> TIM10 counter stopped when core is halted
-//   <o.28> DBG_TIM9_STOP            <i> TIM9 counter stopped when core is halted
-//   <o.27> DBG_TIM14_STOP           <i> TIM14 counter stopped when core is halted
-//   <o.26> DBG_TIM13_STOP           <i> TIM13 counter stopped when core is halted
-//   <o.25> DBG_TIM12_STOP           <i> TIM12 counter stopped when core is halted
-//   <o.21> DBG_CAN2_STOP            <i> Debug CAN2 stopped when core is halted
-//   <o.20> DBG_TIM7_STOP            <i> TIM7 counter stopped when core is halted
-//   <o.19> DBG_TIM6_STOP            <i> TIM6 counter stopped when core is halted
-//   <o.18> DBG_TIM5_STOP            <i> TIM5 counter stopped when core is halted
-//   <o.17> DBG_TIM8_STOP            <i> TIM8 counter stopped when core is halted
-//   <o.16> DBG_I2C2_SMBUS_TIMEOUT   <i> SMBUS timeout mode stopped when core is halted
-//   <o.15> DBG_I2C1_SMBUS_TIMEOUT   <i> SMBUS timeout mode stopped when core is halted
-//   <o.14> DBG_CAN1_STOP            <i> Debug CAN1 stopped when Core is halted
-//   <o.13> DBG_TIM4_STOP            <i> TIM4 counter stopped when core is halted
-//   <o.12> DBG_TIM3_STOP            <i> TIM3 counter stopped when core is halted
-//   <o.11> DBG_TIM2_STOP            <i> TIM2 counter stopped when core is halted
-//   <o.10> DBG_TIM1_STOP            <i> TIM1 counter stopped when core is halted
-//   <o.9>  DBG_WWDG_STOP            <i> Debug window watchdog stopped when core is halted
-//   <o.8>  DBG_IWDG_STOP            <i> Debug independent watchdog stopped when core is halted
-//   <o.2>  DBG_STANDBY              <i> Debug standby mode
-//   <o.1>  DBG_STOP                 <i> Debug stop mode
-//   <o.0>  DBG_SLEEP                <i> Debug sleep mode
-// </h>
-DbgMCU_CR = 0x00000007;
-
-// <<< end of configuration section >>>

Projects/MDK-ARM/atk_f103.uvoptx

@@ -125,7 +125,7 @@
         <SetRegEntry>
           <Number>0</Number>
           <Key>ST-LINKIII-KEIL_SWO</Key>
-          <Name>-U12029401190032524B413836 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("") -D00(00000000) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8007 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103ZE$Flash\STM32F10x_512.FLM)</Name>
+          <Name>-U12029401190032524B413836 -O206 -SF10000 -C0 -A0 -I0 -HNlocalhost -HP7184 -P1 -N00("ARM CoreSight SW-DP (ARM Core") -D00(1BA01477) -L00(0) -TO131090 -TC10000000 -TT10000000 -TP21 -TDS8000 -TDT0 -TDC1F -TIEFFFFFFFF -TIP8 -FO15 -FD20000000 -FC1000 -FN1 -FF0STM32F10x_512.FLM -FS08000000 -FL080000 -FP0($$Device:STM32F103ZE$Flash\STM32F10x_512.FLM)</Name>
         </SetRegEntry>
         <SetRegEntry>
           <Number>0</Number>
@@ -192,7 +192,7 @@
       <pSingCmdsp></pSingCmdsp>
       <pMultCmdsp></pMultCmdsp>
       <DebugDescription>
-        <Enable>1</Enable>
+        <Enable>0</Enable>
         <EnableFlashSeq>0</EnableFlashSeq>
         <EnableLog>0</EnableLog>
         <Protocol>2</Protocol>
@@ -519,7 +519,7 @@
 
   <Group>
     <GroupName>Drivers/BSP</GroupName>
-    <tvExp>1</tvExp>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>
@@ -611,7 +611,7 @@
 
   <Group>
     <GroupName>Middlewares</GroupName>
-    <tvExp>1</tvExp>
+    <tvExp>0</tvExp>
     <tvExpOptDlg>0</tvExpOptDlg>
     <cbSel>0</cbSel>
     <RteFlg>0</RteFlg>

Projects/MDK-ARM/atk_f103.uvprojx

@@ -16,8 +16,8 @@
         <TargetCommonOption>
           <Device>STM32F103ZE</Device>
           <Vendor>STMicroelectronics</Vendor>
-          <PackID>Keil.STM32F1xx_DFP.2.4.1</PackID>
-          <PackURL>https://www.keil.com/pack/</PackURL>
+          <PackID>Keil.STM32F1xx_DFP.2.3.0</PackID>
+          <PackURL>http://www.keil.com/pack/</PackURL>
           <Cpu>IRAM(0x20000000,0x00010000) IROM(0x08000000,0x00080000) CPUTYPE("Cortex-M3") CLOCK(12000000) ELITTLE</Cpu>
           <FlashUtilSpec></FlashUtilSpec>
           <StartupFile></StartupFile>
@@ -49,7 +49,7 @@
             <InvalidFlash>1</InvalidFlash>
           </TargetStatus>
           <OutputDirectory>..\..\Output\</OutputDirectory>
-          <OutputName>atk_f103</OutputName>
+          <OutputName>DTU</OutputName>
           <CreateExecutable>1</CreateExecutable>
           <CreateLib>0</CreateLib>
           <CreateHexFile>1</CreateHexFile>