first commit
This commit is contained in:
10240
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
Normal file
10240
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xb.h
Normal file
File diff suppressed because it is too large
Load Diff
11767
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
Normal file
11767
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f103xe.h
Normal file
File diff suppressed because it is too large
Load Diff
273
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
Normal file
273
Drivers/CMSIS/Device/ST/STM32F1xx/Include/stm32f1xx.h
Normal file
@@ -0,0 +1,273 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f1xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS STM32F1xx Device Peripheral Access Layer Header File.
|
||||
*
|
||||
* The file is the unique include file that the application programmer
|
||||
* is using in the C source code, usually in main.c. This file contains:
|
||||
* - Configuration section that allows to select:
|
||||
* - The STM32F1xx device used in the target application
|
||||
* - To use or not the peripheral's drivers in application code(i.e.
|
||||
* code will be based on direct access to peripheral's registers
|
||||
* rather than drivers API), this option is controlled by
|
||||
* "#define USE_HAL_DRIVER"
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx
|
||||
* @{
|
||||
*/
|
||||
|
||||
#ifndef __STM32F1XX_H
|
||||
#define __STM32F1XX_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif /* __cplusplus */
|
||||
|
||||
/** @addtogroup Library_configuration_section
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief STM32 Family
|
||||
*/
|
||||
#if !defined (STM32F1)
|
||||
#define STM32F1
|
||||
#endif /* STM32F1 */
|
||||
|
||||
/* Uncomment the line below according to the target STM32L device used in your
|
||||
application
|
||||
*/
|
||||
|
||||
#if !defined (STM32F100xB) && !defined (STM32F100xE) && !defined (STM32F101x6) && \
|
||||
!defined (STM32F101xB) && !defined (STM32F101xE) && !defined (STM32F101xG) && !defined (STM32F102x6) && !defined (STM32F102xB) && !defined (STM32F103x6) && \
|
||||
!defined (STM32F103xB) && !defined (STM32F103xE) && !defined (STM32F103xG) && !defined (STM32F105xC) && !defined (STM32F107xC)
|
||||
/* #define STM32F100xB */ /*!< STM32F100C4, STM32F100R4, STM32F100C6, STM32F100R6, STM32F100C8, STM32F100R8, STM32F100V8, STM32F100CB, STM32F100RB and STM32F100VB */
|
||||
/* #define STM32F100xE */ /*!< STM32F100RC, STM32F100VC, STM32F100ZC, STM32F100RD, STM32F100VD, STM32F100ZD, STM32F100RE, STM32F100VE and STM32F100ZE */
|
||||
/* #define STM32F101x6 */ /*!< STM32F101C4, STM32F101R4, STM32F101T4, STM32F101C6, STM32F101R6 and STM32F101T6 Devices */
|
||||
/* #define STM32F101xB */ /*!< STM32F101C8, STM32F101R8, STM32F101T8, STM32F101V8, STM32F101CB, STM32F101RB, STM32F101TB and STM32F101VB */
|
||||
/* #define STM32F101xE */ /*!< STM32F101RC, STM32F101VC, STM32F101ZC, STM32F101RD, STM32F101VD, STM32F101ZD, STM32F101RE, STM32F101VE and STM32F101ZE */
|
||||
/* #define STM32F101xG */ /*!< STM32F101RF, STM32F101VF, STM32F101ZF, STM32F101RG, STM32F101VG and STM32F101ZG */
|
||||
/* #define STM32F102x6 */ /*!< STM32F102C4, STM32F102R4, STM32F102C6 and STM32F102R6 */
|
||||
/* #define STM32F102xB */ /*!< STM32F102C8, STM32F102R8, STM32F102CB and STM32F102RB */
|
||||
/* #define STM32F103x6 */ /*!< STM32F103C4, STM32F103R4, STM32F103T4, STM32F103C6, STM32F103R6 and STM32F103T6 */
|
||||
/* #define STM32F103xB */ /*!< STM32F103C8, STM32F103R8, STM32F103T8, STM32F103V8, STM32F103CB, STM32F103RB, STM32F103TB and STM32F103VB */
|
||||
/* #define STM32F103xE */ /*!< STM32F103RC, STM32F103VC, STM32F103ZC, STM32F103RD, STM32F103VD, STM32F103ZD, STM32F103RE, STM32F103VE and STM32F103ZE */
|
||||
/* #define STM32F103xG */ /*!< STM32F103RF, STM32F103VF, STM32F103ZF, STM32F103RG, STM32F103VG and STM32F103ZG */
|
||||
/* #define STM32F105xC */ /*!< STM32F105R8, STM32F105V8, STM32F105RB, STM32F105VB, STM32F105RC and STM32F105VC */
|
||||
/* #define STM32F107xC */ /*!< STM32F107RB, STM32F107VB, STM32F107RC and STM32F107VC */
|
||||
#endif
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to switch between these
|
||||
devices, you can define the device in your toolchain compiler preprocessor.
|
||||
*/
|
||||
|
||||
#if !defined (USE_HAL_DRIVER)
|
||||
/**
|
||||
* @brief Comment the line below if you will not use the peripherals drivers.
|
||||
In this case, these drivers will not be included and the application code will
|
||||
be based on direct access to peripherals registers
|
||||
*/
|
||||
/*#define USE_HAL_DRIVER */
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
/**
|
||||
* @brief CMSIS Device version number
|
||||
*/
|
||||
#define __STM32F1_CMSIS_VERSION_MAIN (0x04) /*!< [31:24] main version */
|
||||
#define __STM32F1_CMSIS_VERSION_SUB1 (0x03) /*!< [23:16] sub1 version */
|
||||
#define __STM32F1_CMSIS_VERSION_SUB2 (0x05) /*!< [15:8] sub2 version */
|
||||
#define __STM32F1_CMSIS_VERSION_RC (0x00) /*!< [7:0] release candidate */
|
||||
#define __STM32F1_CMSIS_VERSION ((__STM32F1_CMSIS_VERSION_MAIN << 24)\
|
||||
|(__STM32F1_CMSIS_VERSION_SUB1 << 16)\
|
||||
|(__STM32F1_CMSIS_VERSION_SUB2 << 8 )\
|
||||
|(__STM32F1_CMSIS_VERSION_RC))
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Device_Included
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xB)
|
||||
#include "stm32f100xb.h"
|
||||
#elif defined(STM32F100xE)
|
||||
#include "stm32f100xe.h"
|
||||
#elif defined(STM32F101x6)
|
||||
#include "stm32f101x6.h"
|
||||
#elif defined(STM32F101xB)
|
||||
#include "stm32f101xb.h"
|
||||
#elif defined(STM32F101xE)
|
||||
#include "stm32f101xe.h"
|
||||
#elif defined(STM32F101xG)
|
||||
#include "stm32f101xg.h"
|
||||
#elif defined(STM32F102x6)
|
||||
#include "stm32f102x6.h"
|
||||
#elif defined(STM32F102xB)
|
||||
#include "stm32f102xb.h"
|
||||
#elif defined(STM32F103x6)
|
||||
#include "stm32f103x6.h"
|
||||
#elif defined(STM32F103xB)
|
||||
#include "stm32f103xb.h"
|
||||
#elif defined(STM32F103xE)
|
||||
#include "stm32f103xe.h"
|
||||
#elif defined(STM32F103xG)
|
||||
#include "stm32f103xg.h"
|
||||
#elif defined(STM32F105xC)
|
||||
#include "stm32f105xc.h"
|
||||
#elif defined(STM32F107xC)
|
||||
#include "stm32f107xc.h"
|
||||
#else
|
||||
#error "Please select first the target STM32F1xx device used in your application (in stm32f1xx.h file)"
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup Exported_types
|
||||
* @{
|
||||
*/
|
||||
typedef enum
|
||||
{
|
||||
RESET = 0,
|
||||
SET = !RESET
|
||||
} FlagStatus, ITStatus;
|
||||
|
||||
typedef enum
|
||||
{
|
||||
DISABLE = 0,
|
||||
ENABLE = !DISABLE
|
||||
} FunctionalState;
|
||||
#define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
|
||||
|
||||
typedef enum
|
||||
{
|
||||
SUCCESS = 0U,
|
||||
ERROR = !SUCCESS
|
||||
} ErrorStatus;
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup Exported_macros
|
||||
* @{
|
||||
*/
|
||||
#define SET_BIT(REG, BIT) ((REG) |= (BIT))
|
||||
|
||||
#define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
|
||||
|
||||
#define READ_BIT(REG, BIT) ((REG) & (BIT))
|
||||
|
||||
#define CLEAR_REG(REG) ((REG) = (0x0))
|
||||
|
||||
#define WRITE_REG(REG, VAL) ((REG) = (VAL))
|
||||
|
||||
#define READ_REG(REG) ((REG))
|
||||
|
||||
#define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
|
||||
|
||||
#define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
|
||||
|
||||
/* Use of CMSIS compiler intrinsics for register exclusive access */
|
||||
/* Atomic 32-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SET_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEAR_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = __LDREXW((__IO uint32_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 32-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFY_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint32_t val; \
|
||||
do { \
|
||||
val = (__LDREXW((__IO uint32_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXW(val,(__IO uint32_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to set one or several bits */
|
||||
#define ATOMIC_SETH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) | (BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear one or several bits */
|
||||
#define ATOMIC_CLEARH_BIT(REG, BIT) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = __LDREXH((__IO uint16_t *)&(REG)) & ~(BIT); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
/* Atomic 16-bit register access macro to clear and set one or several bits */
|
||||
#define ATOMIC_MODIFYH_REG(REG, CLEARMSK, SETMASK) \
|
||||
do { \
|
||||
uint16_t val; \
|
||||
do { \
|
||||
val = (__LDREXH((__IO uint16_t *)&(REG)) & ~(CLEARMSK)) | (SETMASK); \
|
||||
} while ((__STREXH(val,(__IO uint16_t *)&(REG))) != 0U); \
|
||||
} while(0)
|
||||
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#if defined (USE_HAL_DRIVER)
|
||||
#include "stm32f1xx_hal.h"
|
||||
#endif /* USE_HAL_DRIVER */
|
||||
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif /* __cplusplus */
|
||||
|
||||
#endif /* __STM32F1xx_H */
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
|
||||
|
||||
96
Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
Normal file
96
Drivers/CMSIS/Device/ST/STM32F1xx/Include/system_stm32f1xx.h
Normal file
@@ -0,0 +1,96 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f1xx.h
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Header File.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* Copyright (c) 2017-2021 STMicroelectronics.
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software is licensed under terms that can be found in the LICENSE file
|
||||
* in the root directory of this software component.
|
||||
* If no LICENSE file comes with this software, it is provided AS-IS.
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f10x_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Define to prevent recursive inclusion
|
||||
*/
|
||||
#ifndef __SYSTEM_STM32F10X_H
|
||||
#define __SYSTEM_STM32F10X_H
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/** @addtogroup STM32F10x_System_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_types
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern uint32_t SystemCoreClock; /*!< System Clock Frequency (Core Clock) */
|
||||
extern const uint8_t AHBPrescTable[16U]; /*!< AHB prescalers table values */
|
||||
extern const uint8_t APBPrescTable[8U]; /*!< APB prescalers table values */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Constants
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F10x_System_Exported_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
extern void SystemInit(void);
|
||||
extern void SystemCoreClockUpdate(void);
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /*__SYSTEM_STM32F10X_H */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
@@ -0,0 +1,307 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xb.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xB Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1_2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,356 @@
|
||||
;******************** (C) COPYRIGHT 2017 STMicroelectronics ********************
|
||||
;* File Name : startup_stm32f103xe.s
|
||||
;* Author : MCD Application Team
|
||||
;* Description : STM32F103xE Devices vector table for MDK-ARM toolchain.
|
||||
;* This module performs:
|
||||
;* - Set the initial SP
|
||||
;* - Set the initial PC == Reset_Handler
|
||||
;* - Set the vector table entries with the exceptions ISR address
|
||||
;* - Configure the clock system
|
||||
;* - Branches to __main in the C library (which eventually
|
||||
;* calls main()).
|
||||
;* After Reset the Cortex-M3 processor is in Thread mode,
|
||||
;* priority is Privileged, and the Stack is set to Main.
|
||||
;******************************************************************************
|
||||
;* @attention
|
||||
;*
|
||||
;* Copyright (c) 2017 STMicroelectronics.
|
||||
;* All rights reserved.
|
||||
;*
|
||||
;* This software component is licensed by ST under BSD 3-Clause license,
|
||||
;* the "License"; You may not use this file except in compliance with the
|
||||
;* License. You may obtain a copy of the License at:
|
||||
;* opensource.org/licenses/BSD-3-Clause
|
||||
;*
|
||||
;******************************************************************************
|
||||
|
||||
; Amount of memory (in bytes) allocated for Stack
|
||||
; Tailor this value to your application needs
|
||||
; <h> Stack Configuration
|
||||
; <o> Stack Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Stack_Size EQU 0x00000400
|
||||
|
||||
AREA STACK, NOINIT, READWRITE, ALIGN=3
|
||||
Stack_Mem SPACE Stack_Size
|
||||
__initial_sp
|
||||
|
||||
; <h> Heap Configuration
|
||||
; <o> Heap Size (in Bytes) <0x0-0xFFFFFFFF:8>
|
||||
; </h>
|
||||
|
||||
Heap_Size EQU 0x00000200
|
||||
|
||||
AREA HEAP, NOINIT, READWRITE, ALIGN=3
|
||||
__heap_base
|
||||
Heap_Mem SPACE Heap_Size
|
||||
__heap_limit
|
||||
|
||||
PRESERVE8
|
||||
THUMB
|
||||
|
||||
|
||||
; Vector Table Mapped to Address 0 at Reset
|
||||
AREA RESET, DATA, READONLY
|
||||
EXPORT __Vectors
|
||||
EXPORT __Vectors_End
|
||||
EXPORT __Vectors_Size
|
||||
|
||||
__Vectors DCD __initial_sp ; Top of Stack
|
||||
DCD Reset_Handler ; Reset Handler
|
||||
DCD NMI_Handler ; NMI Handler
|
||||
DCD HardFault_Handler ; Hard Fault Handler
|
||||
DCD MemManage_Handler ; MPU Fault Handler
|
||||
DCD BusFault_Handler ; Bus Fault Handler
|
||||
DCD UsageFault_Handler ; Usage Fault Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD 0 ; Reserved
|
||||
DCD SVC_Handler ; SVCall Handler
|
||||
DCD DebugMon_Handler ; Debug Monitor Handler
|
||||
DCD 0 ; Reserved
|
||||
DCD PendSV_Handler ; PendSV Handler
|
||||
DCD SysTick_Handler ; SysTick Handler
|
||||
|
||||
; External Interrupts
|
||||
DCD WWDG_IRQHandler ; Window Watchdog
|
||||
DCD PVD_IRQHandler ; PVD through EXTI Line detect
|
||||
DCD TAMPER_IRQHandler ; Tamper
|
||||
DCD RTC_IRQHandler ; RTC
|
||||
DCD FLASH_IRQHandler ; Flash
|
||||
DCD RCC_IRQHandler ; RCC
|
||||
DCD EXTI0_IRQHandler ; EXTI Line 0
|
||||
DCD EXTI1_IRQHandler ; EXTI Line 1
|
||||
DCD EXTI2_IRQHandler ; EXTI Line 2
|
||||
DCD EXTI3_IRQHandler ; EXTI Line 3
|
||||
DCD EXTI4_IRQHandler ; EXTI Line 4
|
||||
DCD DMA1_Channel1_IRQHandler ; DMA1 Channel 1
|
||||
DCD DMA1_Channel2_IRQHandler ; DMA1 Channel 2
|
||||
DCD DMA1_Channel3_IRQHandler ; DMA1 Channel 3
|
||||
DCD DMA1_Channel4_IRQHandler ; DMA1 Channel 4
|
||||
DCD DMA1_Channel5_IRQHandler ; DMA1 Channel 5
|
||||
DCD DMA1_Channel6_IRQHandler ; DMA1 Channel 6
|
||||
DCD DMA1_Channel7_IRQHandler ; DMA1 Channel 7
|
||||
DCD ADC1_2_IRQHandler ; ADC1 & ADC2
|
||||
DCD USB_HP_CAN1_TX_IRQHandler ; USB High Priority or CAN1 TX
|
||||
DCD USB_LP_CAN1_RX0_IRQHandler ; USB Low Priority or CAN1 RX0
|
||||
DCD CAN1_RX1_IRQHandler ; CAN1 RX1
|
||||
DCD CAN1_SCE_IRQHandler ; CAN1 SCE
|
||||
DCD EXTI9_5_IRQHandler ; EXTI Line 9..5
|
||||
DCD TIM1_BRK_IRQHandler ; TIM1 Break
|
||||
DCD TIM1_UP_IRQHandler ; TIM1 Update
|
||||
DCD TIM1_TRG_COM_IRQHandler ; TIM1 Trigger and Commutation
|
||||
DCD TIM1_CC_IRQHandler ; TIM1 Capture Compare
|
||||
DCD TIM2_IRQHandler ; TIM2
|
||||
DCD TIM3_IRQHandler ; TIM3
|
||||
DCD TIM4_IRQHandler ; TIM4
|
||||
DCD I2C1_EV_IRQHandler ; I2C1 Event
|
||||
DCD I2C1_ER_IRQHandler ; I2C1 Error
|
||||
DCD I2C2_EV_IRQHandler ; I2C2 Event
|
||||
DCD I2C2_ER_IRQHandler ; I2C2 Error
|
||||
DCD SPI1_IRQHandler ; SPI1
|
||||
DCD SPI2_IRQHandler ; SPI2
|
||||
DCD USART1_IRQHandler ; USART1
|
||||
DCD USART2_IRQHandler ; USART2
|
||||
DCD USART3_IRQHandler ; USART3
|
||||
DCD EXTI15_10_IRQHandler ; EXTI Line 15..10
|
||||
DCD RTC_Alarm_IRQHandler ; RTC Alarm through EXTI Line
|
||||
DCD USBWakeUp_IRQHandler ; USB Wakeup from suspend
|
||||
DCD TIM8_BRK_IRQHandler ; TIM8 Break
|
||||
DCD TIM8_UP_IRQHandler ; TIM8 Update
|
||||
DCD TIM8_TRG_COM_IRQHandler ; TIM8 Trigger and Commutation
|
||||
DCD TIM8_CC_IRQHandler ; TIM8 Capture Compare
|
||||
DCD ADC3_IRQHandler ; ADC3
|
||||
DCD FSMC_IRQHandler ; FSMC
|
||||
DCD SDIO_IRQHandler ; SDIO
|
||||
DCD TIM5_IRQHandler ; TIM5
|
||||
DCD SPI3_IRQHandler ; SPI3
|
||||
DCD UART4_IRQHandler ; UART4
|
||||
DCD UART5_IRQHandler ; UART5
|
||||
DCD TIM6_IRQHandler ; TIM6
|
||||
DCD TIM7_IRQHandler ; TIM7
|
||||
DCD DMA2_Channel1_IRQHandler ; DMA2 Channel1
|
||||
DCD DMA2_Channel2_IRQHandler ; DMA2 Channel2
|
||||
DCD DMA2_Channel3_IRQHandler ; DMA2 Channel3
|
||||
DCD DMA2_Channel4_5_IRQHandler ; DMA2 Channel4 & Channel5
|
||||
__Vectors_End
|
||||
|
||||
__Vectors_Size EQU __Vectors_End - __Vectors
|
||||
|
||||
AREA |.text|, CODE, READONLY
|
||||
|
||||
; Reset handler
|
||||
Reset_Handler PROC
|
||||
EXPORT Reset_Handler [WEAK]
|
||||
IMPORT __main
|
||||
IMPORT SystemInit
|
||||
LDR R0, =SystemInit
|
||||
BLX R0
|
||||
LDR R0, =__main
|
||||
BX R0
|
||||
ENDP
|
||||
|
||||
; Dummy Exception Handlers (infinite loops which can be modified)
|
||||
|
||||
NMI_Handler PROC
|
||||
EXPORT NMI_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
HardFault_Handler\
|
||||
PROC
|
||||
EXPORT HardFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
MemManage_Handler\
|
||||
PROC
|
||||
EXPORT MemManage_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
BusFault_Handler\
|
||||
PROC
|
||||
EXPORT BusFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
UsageFault_Handler\
|
||||
PROC
|
||||
EXPORT UsageFault_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SVC_Handler PROC
|
||||
EXPORT SVC_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
DebugMon_Handler\
|
||||
PROC
|
||||
EXPORT DebugMon_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
PendSV_Handler PROC
|
||||
EXPORT PendSV_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
SysTick_Handler PROC
|
||||
EXPORT SysTick_Handler [WEAK]
|
||||
B .
|
||||
ENDP
|
||||
|
||||
Default_Handler PROC
|
||||
|
||||
EXPORT WWDG_IRQHandler [WEAK]
|
||||
EXPORT PVD_IRQHandler [WEAK]
|
||||
EXPORT TAMPER_IRQHandler [WEAK]
|
||||
EXPORT RTC_IRQHandler [WEAK]
|
||||
EXPORT FLASH_IRQHandler [WEAK]
|
||||
EXPORT RCC_IRQHandler [WEAK]
|
||||
EXPORT EXTI0_IRQHandler [WEAK]
|
||||
EXPORT EXTI1_IRQHandler [WEAK]
|
||||
EXPORT EXTI2_IRQHandler [WEAK]
|
||||
EXPORT EXTI3_IRQHandler [WEAK]
|
||||
EXPORT EXTI4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel4_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel5_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel6_IRQHandler [WEAK]
|
||||
EXPORT DMA1_Channel7_IRQHandler [WEAK]
|
||||
EXPORT ADC1_2_IRQHandler [WEAK]
|
||||
EXPORT USB_HP_CAN1_TX_IRQHandler [WEAK]
|
||||
EXPORT USB_LP_CAN1_RX0_IRQHandler [WEAK]
|
||||
EXPORT CAN1_RX1_IRQHandler [WEAK]
|
||||
EXPORT CAN1_SCE_IRQHandler [WEAK]
|
||||
EXPORT EXTI9_5_IRQHandler [WEAK]
|
||||
EXPORT TIM1_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM1_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM1_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM1_CC_IRQHandler [WEAK]
|
||||
EXPORT TIM2_IRQHandler [WEAK]
|
||||
EXPORT TIM3_IRQHandler [WEAK]
|
||||
EXPORT TIM4_IRQHandler [WEAK]
|
||||
EXPORT I2C1_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C1_ER_IRQHandler [WEAK]
|
||||
EXPORT I2C2_EV_IRQHandler [WEAK]
|
||||
EXPORT I2C2_ER_IRQHandler [WEAK]
|
||||
EXPORT SPI1_IRQHandler [WEAK]
|
||||
EXPORT SPI2_IRQHandler [WEAK]
|
||||
EXPORT USART1_IRQHandler [WEAK]
|
||||
EXPORT USART2_IRQHandler [WEAK]
|
||||
EXPORT USART3_IRQHandler [WEAK]
|
||||
EXPORT EXTI15_10_IRQHandler [WEAK]
|
||||
EXPORT RTC_Alarm_IRQHandler [WEAK]
|
||||
EXPORT USBWakeUp_IRQHandler [WEAK]
|
||||
EXPORT TIM8_BRK_IRQHandler [WEAK]
|
||||
EXPORT TIM8_UP_IRQHandler [WEAK]
|
||||
EXPORT TIM8_TRG_COM_IRQHandler [WEAK]
|
||||
EXPORT TIM8_CC_IRQHandler [WEAK]
|
||||
EXPORT ADC3_IRQHandler [WEAK]
|
||||
EXPORT FSMC_IRQHandler [WEAK]
|
||||
EXPORT SDIO_IRQHandler [WEAK]
|
||||
EXPORT TIM5_IRQHandler [WEAK]
|
||||
EXPORT SPI3_IRQHandler [WEAK]
|
||||
EXPORT UART4_IRQHandler [WEAK]
|
||||
EXPORT UART5_IRQHandler [WEAK]
|
||||
EXPORT TIM6_IRQHandler [WEAK]
|
||||
EXPORT TIM7_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel1_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel2_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel3_IRQHandler [WEAK]
|
||||
EXPORT DMA2_Channel4_5_IRQHandler [WEAK]
|
||||
|
||||
WWDG_IRQHandler
|
||||
PVD_IRQHandler
|
||||
TAMPER_IRQHandler
|
||||
RTC_IRQHandler
|
||||
FLASH_IRQHandler
|
||||
RCC_IRQHandler
|
||||
EXTI0_IRQHandler
|
||||
EXTI1_IRQHandler
|
||||
EXTI2_IRQHandler
|
||||
EXTI3_IRQHandler
|
||||
EXTI4_IRQHandler
|
||||
DMA1_Channel1_IRQHandler
|
||||
DMA1_Channel2_IRQHandler
|
||||
DMA1_Channel3_IRQHandler
|
||||
DMA1_Channel4_IRQHandler
|
||||
DMA1_Channel5_IRQHandler
|
||||
DMA1_Channel6_IRQHandler
|
||||
DMA1_Channel7_IRQHandler
|
||||
ADC1_2_IRQHandler
|
||||
USB_HP_CAN1_TX_IRQHandler
|
||||
USB_LP_CAN1_RX0_IRQHandler
|
||||
CAN1_RX1_IRQHandler
|
||||
CAN1_SCE_IRQHandler
|
||||
EXTI9_5_IRQHandler
|
||||
TIM1_BRK_IRQHandler
|
||||
TIM1_UP_IRQHandler
|
||||
TIM1_TRG_COM_IRQHandler
|
||||
TIM1_CC_IRQHandler
|
||||
TIM2_IRQHandler
|
||||
TIM3_IRQHandler
|
||||
TIM4_IRQHandler
|
||||
I2C1_EV_IRQHandler
|
||||
I2C1_ER_IRQHandler
|
||||
I2C2_EV_IRQHandler
|
||||
I2C2_ER_IRQHandler
|
||||
SPI1_IRQHandler
|
||||
SPI2_IRQHandler
|
||||
USART1_IRQHandler
|
||||
USART2_IRQHandler
|
||||
USART3_IRQHandler
|
||||
EXTI15_10_IRQHandler
|
||||
RTC_Alarm_IRQHandler
|
||||
USBWakeUp_IRQHandler
|
||||
TIM8_BRK_IRQHandler
|
||||
TIM8_UP_IRQHandler
|
||||
TIM8_TRG_COM_IRQHandler
|
||||
TIM8_CC_IRQHandler
|
||||
ADC3_IRQHandler
|
||||
FSMC_IRQHandler
|
||||
SDIO_IRQHandler
|
||||
TIM5_IRQHandler
|
||||
SPI3_IRQHandler
|
||||
UART4_IRQHandler
|
||||
UART5_IRQHandler
|
||||
TIM6_IRQHandler
|
||||
TIM7_IRQHandler
|
||||
DMA2_Channel1_IRQHandler
|
||||
DMA2_Channel2_IRQHandler
|
||||
DMA2_Channel3_IRQHandler
|
||||
DMA2_Channel4_5_IRQHandler
|
||||
B .
|
||||
|
||||
ENDP
|
||||
|
||||
ALIGN
|
||||
|
||||
;*******************************************************************************
|
||||
; User Stack and Heap initialization
|
||||
;*******************************************************************************
|
||||
IF :DEF:__MICROLIB
|
||||
|
||||
EXPORT __initial_sp
|
||||
EXPORT __heap_base
|
||||
EXPORT __heap_limit
|
||||
|
||||
ELSE
|
||||
|
||||
IMPORT __use_two_region_memory
|
||||
EXPORT __user_initial_stackheap
|
||||
|
||||
__user_initial_stackheap
|
||||
|
||||
LDR R0, = Heap_Mem
|
||||
LDR R1, =(Stack_Mem + Stack_Size)
|
||||
LDR R2, = (Heap_Mem + Heap_Size)
|
||||
LDR R3, = Stack_Mem
|
||||
BX LR
|
||||
|
||||
ALIGN
|
||||
|
||||
ENDIF
|
||||
|
||||
END
|
||||
|
||||
;************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE*****
|
||||
@@ -0,0 +1,408 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file system_stm32f1xx.c
|
||||
* @author MCD Application Team
|
||||
* @brief CMSIS Cortex-M3 Device Peripheral Access Layer System Source File.
|
||||
*
|
||||
* 1. This file provides two functions and one global variable to be called from
|
||||
* user application:
|
||||
* - SystemInit(): Setups the system clock (System clock source, PLL Multiplier
|
||||
* factors, AHB/APBx prescalers and Flash settings).
|
||||
* This function is called at startup just after reset and
|
||||
* before branch to main program. This call is made inside
|
||||
* the "startup_stm32f1xx_xx.s" file.
|
||||
*
|
||||
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
||||
* by the user application to setup the SysTick
|
||||
* timer or configure other parameters.
|
||||
*
|
||||
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
||||
* be called whenever the core clock is changed
|
||||
* during program execution.
|
||||
*
|
||||
* 2. After each device reset the HSI (8 MHz) is used as system clock source.
|
||||
* Then SystemInit() function is called, in "startup_stm32f1xx_xx.s" file, to
|
||||
* configure the system clock before to branch to main program.
|
||||
*
|
||||
* 4. The default value of HSE crystal is set to 8 MHz (or 25 MHz, depending on
|
||||
* the product used), refer to "HSE_VALUE".
|
||||
* When HSE is used as system clock source, directly or through PLL, and you
|
||||
* are using different crystal you have to adapt the HSE value to your own
|
||||
* configuration.
|
||||
*
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/** @addtogroup CMSIS
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup stm32f1xx_system
|
||||
* @{
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Includes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#include "stm32f1xx.h"
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_TypesDefinitions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Defines
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if !defined (HSE_VALUE)
|
||||
#define HSE_VALUE 8000000U /*!< Default value of the External oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#if !defined (HSI_VALUE)
|
||||
#define HSI_VALUE 8000000U /*!< Default value of the Internal oscillator in Hz.
|
||||
This value can be provided and adapted by the user application. */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/*!< Uncomment the following line if you need to use external SRAM */
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/* #define DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/* Note: Following vector table addresses must be defined in line with linker
|
||||
configuration. */
|
||||
/*!< Uncomment the following line if you need to relocate the vector table
|
||||
anywhere in Flash or Sram, else the vector table is kept at the automatic
|
||||
remap of boot address selected */
|
||||
/* #define USER_VECT_TAB_ADDRESS */
|
||||
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
/*!< Uncomment the following line if you need to relocate your vector Table
|
||||
in Sram else user remap will be done in Flash. */
|
||||
/* #define VECT_TAB_SRAM */
|
||||
#if defined(VECT_TAB_SRAM)
|
||||
#define VECT_TAB_BASE_ADDRESS SRAM_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#else
|
||||
#define VECT_TAB_BASE_ADDRESS FLASH_BASE /*!< Vector Table base address field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#define VECT_TAB_OFFSET 0x00000000U /*!< Vector Table base offset field.
|
||||
This value must be a multiple of 0x200. */
|
||||
#endif /* VECT_TAB_SRAM */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
|
||||
/******************************************************************************/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Macros
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Variables
|
||||
* @{
|
||||
*/
|
||||
|
||||
/* This variable is updated in three ways:
|
||||
1) by calling CMSIS function SystemCoreClockUpdate()
|
||||
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
||||
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
||||
Note: If you use this function to configure the system clock; then there
|
||||
is no need to call the 2 first functions listed above, since SystemCoreClock
|
||||
variable is updated automatically.
|
||||
*/
|
||||
uint32_t SystemCoreClock = 16000000;
|
||||
const uint8_t AHBPrescTable[16U] = {0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9};
|
||||
const uint8_t APBPrescTable[8U] = {0, 0, 0, 0, 1, 2, 3, 4};
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_FunctionPrototypes
|
||||
* @{
|
||||
*/
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
static void SystemInit_ExtMemCtl(void);
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/** @addtogroup STM32F1xx_System_Private_Functions
|
||||
* @{
|
||||
*/
|
||||
|
||||
/**
|
||||
* @brief Setup the microcontroller system
|
||||
* Initialize the Embedded Flash Interface, the PLL and update the
|
||||
* SystemCoreClock variable.
|
||||
* @note This function should be used only after reset.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit (void)
|
||||
{
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
SystemInit_ExtMemCtl();
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif
|
||||
|
||||
/* Configure the Vector Table location -------------------------------------*/
|
||||
#if defined(USER_VECT_TAB_ADDRESS)
|
||||
SCB->VTOR = VECT_TAB_BASE_ADDRESS | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM. */
|
||||
#endif /* USER_VECT_TAB_ADDRESS */
|
||||
}
|
||||
|
||||
/**
|
||||
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
||||
* The SystemCoreClock variable contains the core clock (HCLK), it can
|
||||
* be used by the user application to setup the SysTick timer or configure
|
||||
* other parameters.
|
||||
*
|
||||
* @note Each time the core clock (HCLK) changes, this function must be called
|
||||
* to update SystemCoreClock variable value. Otherwise, any configuration
|
||||
* based on this variable will be incorrect.
|
||||
*
|
||||
* @note - The system frequency computed by this function is not the real
|
||||
* frequency in the chip. It is calculated based on the predefined
|
||||
* constant and the selected clock source:
|
||||
*
|
||||
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(*)
|
||||
*
|
||||
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
*
|
||||
* - If SYSCLK source is PLL, SystemCoreClock will contain the HSE_VALUE(**)
|
||||
* or HSI_VALUE(*) multiplied by the PLL factors.
|
||||
*
|
||||
* (*) HSI_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz) but the real value may vary depending on the variations
|
||||
* in voltage and temperature.
|
||||
*
|
||||
* (**) HSE_VALUE is a constant defined in stm32f1xx.h file (default value
|
||||
* 8 MHz or 25 MHz, depending on the product used), user has to ensure
|
||||
* that HSE_VALUE is same as the real frequency of the crystal used.
|
||||
* Otherwise, this function may have wrong result.
|
||||
*
|
||||
* - The result of this function could be not correct when using fractional
|
||||
* value for HSE crystal.
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemCoreClockUpdate (void)
|
||||
{
|
||||
uint32_t tmp = 0U, pllmull = 0U, pllsource = 0U;
|
||||
|
||||
#if defined(STM32F105xC) || defined(STM32F107xC)
|
||||
uint32_t prediv1source = 0U, prediv1factor = 0U, prediv2factor = 0U, pll2mull = 0U;
|
||||
#endif /* STM32F105xC */
|
||||
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
uint32_t prediv1factor = 0U;
|
||||
#endif /* STM32F100xB or STM32F100xE */
|
||||
|
||||
/* Get SYSCLK source -------------------------------------------------------*/
|
||||
tmp = RCC->CFGR & RCC_CFGR_SWS;
|
||||
|
||||
switch (tmp)
|
||||
{
|
||||
case 0x00U: /* HSI used as system clock */
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
case 0x04U: /* HSE used as system clock */
|
||||
SystemCoreClock = HSE_VALUE;
|
||||
break;
|
||||
case 0x08U: /* PLL used as system clock */
|
||||
|
||||
/* Get PLL clock source and multiplication factor ----------------------*/
|
||||
pllmull = RCC->CFGR & RCC_CFGR_PLLMULL;
|
||||
pllsource = RCC->CFGR & RCC_CFGR_PLLSRC;
|
||||
|
||||
#if !defined(STM32F105xC) && !defined(STM32F107xC)
|
||||
pllmull = ( pllmull >> 18U) + 2U;
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
#if defined(STM32F100xB) || defined(STM32F100xE)
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
#else
|
||||
/* HSE selected as PLL clock entry */
|
||||
if ((RCC->CFGR & RCC_CFGR_PLLXTPRE) != (uint32_t)RESET)
|
||||
{/* HSE oscillator clock divided by 2 */
|
||||
SystemCoreClock = (HSE_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{
|
||||
SystemCoreClock = HSE_VALUE * pllmull;
|
||||
}
|
||||
#endif
|
||||
}
|
||||
#else
|
||||
pllmull = pllmull >> 18U;
|
||||
|
||||
if (pllmull != 0x0DU)
|
||||
{
|
||||
pllmull += 2U;
|
||||
}
|
||||
else
|
||||
{ /* PLL multiplication factor = PLL input clock * 6.5 */
|
||||
pllmull = 13U / 2U;
|
||||
}
|
||||
|
||||
if (pllsource == 0x00U)
|
||||
{
|
||||
/* HSI oscillator clock divided by 2 selected as PLL clock entry */
|
||||
SystemCoreClock = (HSI_VALUE >> 1U) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PREDIV1 selected as PLL clock entry */
|
||||
|
||||
/* Get PREDIV1 clock source and division factor */
|
||||
prediv1source = RCC->CFGR2 & RCC_CFGR2_PREDIV1SRC;
|
||||
prediv1factor = (RCC->CFGR2 & RCC_CFGR2_PREDIV1) + 1U;
|
||||
|
||||
if (prediv1source == 0U)
|
||||
{
|
||||
/* HSE oscillator clock selected as PREDIV1 clock entry */
|
||||
SystemCoreClock = (HSE_VALUE / prediv1factor) * pllmull;
|
||||
}
|
||||
else
|
||||
{/* PLL2 clock selected as PREDIV1 clock entry */
|
||||
|
||||
/* Get PREDIV2 division factor and PLL2 multiplication factor */
|
||||
prediv2factor = ((RCC->CFGR2 & RCC_CFGR2_PREDIV2) >> 4U) + 1U;
|
||||
pll2mull = ((RCC->CFGR2 & RCC_CFGR2_PLL2MUL) >> 8U) + 2U;
|
||||
SystemCoreClock = (((HSE_VALUE / prediv2factor) * pll2mull) / prediv1factor) * pllmull;
|
||||
}
|
||||
}
|
||||
#endif /* STM32F105xC */
|
||||
break;
|
||||
|
||||
default:
|
||||
SystemCoreClock = HSI_VALUE;
|
||||
break;
|
||||
}
|
||||
|
||||
/* Compute HCLK clock frequency ----------------*/
|
||||
/* Get HCLK prescaler */
|
||||
tmp = AHBPrescTable[((RCC->CFGR & RCC_CFGR_HPRE) >> 4U)];
|
||||
/* HCLK clock frequency */
|
||||
SystemCoreClock >>= tmp;
|
||||
}
|
||||
|
||||
#if defined(STM32F100xE) || defined(STM32F101xE) || defined(STM32F101xG) || defined(STM32F103xE) || defined(STM32F103xG)
|
||||
/**
|
||||
* @brief Setup the external memory controller. Called in startup_stm32f1xx.s
|
||||
* before jump to __main
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
#ifdef DATA_IN_ExtSRAM
|
||||
/**
|
||||
* @brief Setup the external memory controller.
|
||||
* Called in startup_stm32f1xx_xx.s/.c before jump to main.
|
||||
* This function configures the external SRAM mounted on STM3210E-EVAL
|
||||
* board (STM32 High density devices). This SRAM will be used as program
|
||||
* data memory (including heap and stack).
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
void SystemInit_ExtMemCtl(void)
|
||||
{
|
||||
__IO uint32_t tmpreg;
|
||||
/*!< FSMC Bank1 NOR/SRAM3 is used for the STM3210E-EVAL, if another Bank is
|
||||
required, then adjust the Register Addresses */
|
||||
|
||||
/* Enable FSMC clock */
|
||||
RCC->AHBENR = 0x00000114U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->AHBENR, RCC_AHBENR_FSMCEN);
|
||||
|
||||
/* Enable GPIOD, GPIOE, GPIOF and GPIOG clocks */
|
||||
RCC->APB2ENR = 0x000001E0U;
|
||||
|
||||
/* Delay after an RCC peripheral clock enabling */
|
||||
tmpreg = READ_BIT(RCC->APB2ENR, RCC_APB2ENR_IOPDEN);
|
||||
|
||||
(void)(tmpreg);
|
||||
|
||||
/* --------------- SRAM Data lines, NOE and NWE configuration ---------------*/
|
||||
/*---------------- SRAM Address lines configuration -------------------------*/
|
||||
/*---------------- NOE and NWE configuration --------------------------------*/
|
||||
/*---------------- NE3 configuration ----------------------------------------*/
|
||||
/*---------------- NBL0, NBL1 configuration ---------------------------------*/
|
||||
|
||||
GPIOD->CRL = 0x44BB44BBU;
|
||||
GPIOD->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOE->CRL = 0xB44444BBU;
|
||||
GPIOE->CRH = 0xBBBBBBBBU;
|
||||
|
||||
GPIOF->CRL = 0x44BBBBBBU;
|
||||
GPIOF->CRH = 0xBBBB4444U;
|
||||
|
||||
GPIOG->CRL = 0x44BBBBBBU;
|
||||
GPIOG->CRH = 0x444B4B44U;
|
||||
|
||||
/*---------------- FSMC Configuration ---------------------------------------*/
|
||||
/*---------------- Enable FSMC Bank1_SRAM Bank ------------------------------*/
|
||||
|
||||
FSMC_Bank1->BTCR[4U] = 0x00001091U;
|
||||
FSMC_Bank1->BTCR[5U] = 0x00110212U;
|
||||
}
|
||||
#endif /* DATA_IN_ExtSRAM */
|
||||
#endif /* STM32F100xE || STM32F101xE || STM32F101xG || STM32F103xE || STM32F103xG */
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
|
||||
/**
|
||||
* @}
|
||||
*/
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
865
Drivers/CMSIS/Include/cmsis_armcc.h
Normal file
865
Drivers/CMSIS/Include/cmsis_armcc.h
Normal file
@@ -0,0 +1,865 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_armcc.h
|
||||
* @brief CMSIS compiler ARMCC (Arm Compiler 5) header file
|
||||
* @version V5.0.4
|
||||
* @date 10. January 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef __CMSIS_ARMCC_H
|
||||
#define __CMSIS_ARMCC_H
|
||||
|
||||
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 400677)
|
||||
#error "Please use Arm Compiler Toolchain V4.0.677 or later!"
|
||||
#endif
|
||||
|
||||
/* CMSIS compiler control architecture macros */
|
||||
#if ((defined (__TARGET_ARCH_6_M ) && (__TARGET_ARCH_6_M == 1)) || \
|
||||
(defined (__TARGET_ARCH_6S_M ) && (__TARGET_ARCH_6S_M == 1)) )
|
||||
#define __ARM_ARCH_6M__ 1
|
||||
#endif
|
||||
|
||||
#if (defined (__TARGET_ARCH_7_M ) && (__TARGET_ARCH_7_M == 1))
|
||||
#define __ARM_ARCH_7M__ 1
|
||||
#endif
|
||||
|
||||
#if (defined (__TARGET_ARCH_7E_M) && (__TARGET_ARCH_7E_M == 1))
|
||||
#define __ARM_ARCH_7EM__ 1
|
||||
#endif
|
||||
|
||||
/* __ARM_ARCH_8M_BASE__ not applicable */
|
||||
/* __ARM_ARCH_8M_MAIN__ not applicable */
|
||||
|
||||
|
||||
/* CMSIS compiler specific defines */
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE __inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static __inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE static __forceinline
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __declspec(noreturn)
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT __packed struct
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION __packed union
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
#define __UNALIGNED_UINT32(x) (*((__packed uint32_t *)(x)))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) ((*((__packed uint16_t *)(addr))) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
#define __UNALIGNED_UINT16_READ(addr) (*((const __packed uint16_t *)(addr)))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) ((*((__packed uint32_t *)(addr))) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
#define __UNALIGNED_UINT32_READ(addr) (*((const __packed uint32_t *)(addr)))
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __attribute__((aligned(x)))
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#define __RESTRICT __restrict
|
||||
#endif
|
||||
|
||||
/* ########################### Core Function Access ########################### */
|
||||
/** \ingroup CMSIS_Core_FunctionInterface
|
||||
\defgroup CMSIS_Core_RegAccFunctions CMSIS Core Register Access Functions
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief Enable IRQ Interrupts
|
||||
\details Enables IRQ interrupts by clearing the I-bit in the CPSR.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
/* intrinsic void __enable_irq(); */
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable IRQ Interrupts
|
||||
\details Disables IRQ interrupts by setting the I-bit in the CPSR.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
/* intrinsic void __disable_irq(); */
|
||||
|
||||
/**
|
||||
\brief Get Control Register
|
||||
\details Returns the content of the Control Register.
|
||||
\return Control Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_CONTROL(void)
|
||||
{
|
||||
register uint32_t __regControl __ASM("control");
|
||||
return(__regControl);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Control Register
|
||||
\details Writes the given value to the Control Register.
|
||||
\param [in] control Control Register value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_CONTROL(uint32_t control)
|
||||
{
|
||||
register uint32_t __regControl __ASM("control");
|
||||
__regControl = control;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get IPSR Register
|
||||
\details Returns the content of the IPSR Register.
|
||||
\return IPSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_IPSR(void)
|
||||
{
|
||||
register uint32_t __regIPSR __ASM("ipsr");
|
||||
return(__regIPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get APSR Register
|
||||
\details Returns the content of the APSR Register.
|
||||
\return APSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_APSR(void)
|
||||
{
|
||||
register uint32_t __regAPSR __ASM("apsr");
|
||||
return(__regAPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get xPSR Register
|
||||
\details Returns the content of the xPSR Register.
|
||||
\return xPSR Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_xPSR(void)
|
||||
{
|
||||
register uint32_t __regXPSR __ASM("xpsr");
|
||||
return(__regXPSR);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Process Stack Pointer
|
||||
\details Returns the current value of the Process Stack Pointer (PSP).
|
||||
\return PSP Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_PSP(void)
|
||||
{
|
||||
register uint32_t __regProcessStackPointer __ASM("psp");
|
||||
return(__regProcessStackPointer);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Process Stack Pointer
|
||||
\details Assigns the given value to the Process Stack Pointer (PSP).
|
||||
\param [in] topOfProcStack Process Stack Pointer value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_PSP(uint32_t topOfProcStack)
|
||||
{
|
||||
register uint32_t __regProcessStackPointer __ASM("psp");
|
||||
__regProcessStackPointer = topOfProcStack;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Main Stack Pointer
|
||||
\details Returns the current value of the Main Stack Pointer (MSP).
|
||||
\return MSP Register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_MSP(void)
|
||||
{
|
||||
register uint32_t __regMainStackPointer __ASM("msp");
|
||||
return(__regMainStackPointer);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Main Stack Pointer
|
||||
\details Assigns the given value to the Main Stack Pointer (MSP).
|
||||
\param [in] topOfMainStack Main Stack Pointer value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_MSP(uint32_t topOfMainStack)
|
||||
{
|
||||
register uint32_t __regMainStackPointer __ASM("msp");
|
||||
__regMainStackPointer = topOfMainStack;
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Priority Mask
|
||||
\details Returns the current state of the priority mask bit from the Priority Mask Register.
|
||||
\return Priority Mask value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_PRIMASK(void)
|
||||
{
|
||||
register uint32_t __regPriMask __ASM("primask");
|
||||
return(__regPriMask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Priority Mask
|
||||
\details Assigns the given value to the Priority Mask Register.
|
||||
\param [in] priMask Priority Mask
|
||||
*/
|
||||
__STATIC_INLINE void __set_PRIMASK(uint32_t priMask)
|
||||
{
|
||||
register uint32_t __regPriMask __ASM("primask");
|
||||
__regPriMask = (priMask);
|
||||
}
|
||||
|
||||
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
/**
|
||||
\brief Enable FIQ
|
||||
\details Enables FIQ interrupts by clearing the F-bit in the CPSR.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
#define __enable_fault_irq __enable_fiq
|
||||
|
||||
|
||||
/**
|
||||
\brief Disable FIQ
|
||||
\details Disables FIQ interrupts by setting the F-bit in the CPSR.
|
||||
Can only be executed in Privileged modes.
|
||||
*/
|
||||
#define __disable_fault_irq __disable_fiq
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Base Priority
|
||||
\details Returns the current value of the Base Priority register.
|
||||
\return Base Priority register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_BASEPRI(void)
|
||||
{
|
||||
register uint32_t __regBasePri __ASM("basepri");
|
||||
return(__regBasePri);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Base Priority
|
||||
\details Assigns the given value to the Base Priority register.
|
||||
\param [in] basePri Base Priority value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_BASEPRI(uint32_t basePri)
|
||||
{
|
||||
register uint32_t __regBasePri __ASM("basepri");
|
||||
__regBasePri = (basePri & 0xFFU);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Base Priority with condition
|
||||
\details Assigns the given value to the Base Priority register only if BASEPRI masking is disabled,
|
||||
or the new value increases the BASEPRI priority level.
|
||||
\param [in] basePri Base Priority value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_BASEPRI_MAX(uint32_t basePri)
|
||||
{
|
||||
register uint32_t __regBasePriMax __ASM("basepri_max");
|
||||
__regBasePriMax = (basePri & 0xFFU);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Get Fault Mask
|
||||
\details Returns the current value of the Fault Mask register.
|
||||
\return Fault Mask register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_FAULTMASK(void)
|
||||
{
|
||||
register uint32_t __regFaultMask __ASM("faultmask");
|
||||
return(__regFaultMask);
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set Fault Mask
|
||||
\details Assigns the given value to the Fault Mask register.
|
||||
\param [in] faultMask Fault Mask value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_FAULTMASK(uint32_t faultMask)
|
||||
{
|
||||
register uint32_t __regFaultMask __ASM("faultmask");
|
||||
__regFaultMask = (faultMask & (uint32_t)1U);
|
||||
}
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
|
||||
/**
|
||||
\brief Get FPSCR
|
||||
\details Returns the current value of the Floating Point Status/Control register.
|
||||
\return Floating Point Status/Control register value
|
||||
*/
|
||||
__STATIC_INLINE uint32_t __get_FPSCR(void)
|
||||
{
|
||||
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
|
||||
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
|
||||
register uint32_t __regfpscr __ASM("fpscr");
|
||||
return(__regfpscr);
|
||||
#else
|
||||
return(0U);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/**
|
||||
\brief Set FPSCR
|
||||
\details Assigns the given value to the Floating Point Status/Control register.
|
||||
\param [in] fpscr Floating Point Status/Control value to set
|
||||
*/
|
||||
__STATIC_INLINE void __set_FPSCR(uint32_t fpscr)
|
||||
{
|
||||
#if ((defined (__FPU_PRESENT) && (__FPU_PRESENT == 1U)) && \
|
||||
(defined (__FPU_USED ) && (__FPU_USED == 1U)) )
|
||||
register uint32_t __regfpscr __ASM("fpscr");
|
||||
__regfpscr = (fpscr);
|
||||
#else
|
||||
(void)fpscr;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
/*@} end of CMSIS_Core_RegAccFunctions */
|
||||
|
||||
|
||||
/* ########################## Core Instruction Access ######################### */
|
||||
/** \defgroup CMSIS_Core_InstructionInterface CMSIS Core Instruction Interface
|
||||
Access to dedicated instructions
|
||||
@{
|
||||
*/
|
||||
|
||||
/**
|
||||
\brief No Operation
|
||||
\details No Operation does nothing. This instruction can be used for code alignment purposes.
|
||||
*/
|
||||
#define __NOP __nop
|
||||
|
||||
|
||||
/**
|
||||
\brief Wait For Interrupt
|
||||
\details Wait For Interrupt is a hint instruction that suspends execution until one of a number of events occurs.
|
||||
*/
|
||||
#define __WFI __wfi
|
||||
|
||||
|
||||
/**
|
||||
\brief Wait For Event
|
||||
\details Wait For Event is a hint instruction that permits the processor to enter
|
||||
a low-power state until one of a number of events occurs.
|
||||
*/
|
||||
#define __WFE __wfe
|
||||
|
||||
|
||||
/**
|
||||
\brief Send Event
|
||||
\details Send Event is a hint instruction. It causes an event to be signaled to the CPU.
|
||||
*/
|
||||
#define __SEV __sev
|
||||
|
||||
|
||||
/**
|
||||
\brief Instruction Synchronization Barrier
|
||||
\details Instruction Synchronization Barrier flushes the pipeline in the processor,
|
||||
so that all instructions following the ISB are fetched from cache or memory,
|
||||
after the instruction has been completed.
|
||||
*/
|
||||
#define __ISB() do {\
|
||||
__schedule_barrier();\
|
||||
__isb(0xF);\
|
||||
__schedule_barrier();\
|
||||
} while (0U)
|
||||
|
||||
/**
|
||||
\brief Data Synchronization Barrier
|
||||
\details Acts as a special kind of Data Memory Barrier.
|
||||
It completes when all explicit memory accesses before this instruction complete.
|
||||
*/
|
||||
#define __DSB() do {\
|
||||
__schedule_barrier();\
|
||||
__dsb(0xF);\
|
||||
__schedule_barrier();\
|
||||
} while (0U)
|
||||
|
||||
/**
|
||||
\brief Data Memory Barrier
|
||||
\details Ensures the apparent order of the explicit memory operations before
|
||||
and after the instruction, without ensuring their completion.
|
||||
*/
|
||||
#define __DMB() do {\
|
||||
__schedule_barrier();\
|
||||
__dmb(0xF);\
|
||||
__schedule_barrier();\
|
||||
} while (0U)
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (32 bit)
|
||||
\details Reverses the byte order in unsigned integer value. For example, 0x12345678 becomes 0x78563412.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#define __REV __rev
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (16 bit)
|
||||
\details Reverses the byte order within each halfword of a word. For example, 0x12345678 becomes 0x34127856.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".rev16_text"))) __STATIC_INLINE __ASM uint32_t __REV16(uint32_t value)
|
||||
{
|
||||
rev16 r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse byte order (16 bit)
|
||||
\details Reverses the byte order in a 16-bit value and returns the signed 16-bit result. For example, 0x0080 becomes 0x8000.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".revsh_text"))) __STATIC_INLINE __ASM int16_t __REVSH(int16_t value)
|
||||
{
|
||||
revsh r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Rotate Right in unsigned value (32 bit)
|
||||
\details Rotate Right (immediate) provides the value of the contents of a register rotated by a variable number of bits.
|
||||
\param [in] op1 Value to rotate
|
||||
\param [in] op2 Number of Bits to rotate
|
||||
\return Rotated value
|
||||
*/
|
||||
#define __ROR __ror
|
||||
|
||||
|
||||
/**
|
||||
\brief Breakpoint
|
||||
\details Causes the processor to enter Debug state.
|
||||
Debug tools can use this to investigate system state when the instruction at a particular address is reached.
|
||||
\param [in] value is ignored by the processor.
|
||||
If required, a debugger can use it to store additional information about the breakpoint.
|
||||
*/
|
||||
#define __BKPT(value) __breakpoint(value)
|
||||
|
||||
|
||||
/**
|
||||
\brief Reverse bit order of value
|
||||
\details Reverses the bit order of the given value.
|
||||
\param [in] value Value to reverse
|
||||
\return Reversed value
|
||||
*/
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
#define __RBIT __rbit
|
||||
#else
|
||||
__attribute__((always_inline)) __STATIC_INLINE uint32_t __RBIT(uint32_t value)
|
||||
{
|
||||
uint32_t result;
|
||||
uint32_t s = (4U /*sizeof(v)*/ * 8U) - 1U; /* extra shift needed at end */
|
||||
|
||||
result = value; /* r will be reversed bits of v; first get LSB of v */
|
||||
for (value >>= 1U; value != 0U; value >>= 1U)
|
||||
{
|
||||
result <<= 1U;
|
||||
result |= value & 1U;
|
||||
s--;
|
||||
}
|
||||
result <<= s; /* shift when v's highest bits are zero */
|
||||
return result;
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Count leading zeros
|
||||
\details Counts the number of leading zeros of a data value.
|
||||
\param [in] value Value to count the leading zeros
|
||||
\return number of leading zeros in value
|
||||
*/
|
||||
#define __CLZ __clz
|
||||
|
||||
|
||||
#if ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (8 bit)
|
||||
\details Executes a exclusive LDR instruction for 8 bit value.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint8_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXB(ptr) ((uint8_t ) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXB(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint8_t ) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (16 bit)
|
||||
\details Executes a exclusive LDR instruction for 16 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint16_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXH(ptr) ((uint16_t) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXH(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint16_t) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDR Exclusive (32 bit)
|
||||
\details Executes a exclusive LDR instruction for 32 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint32_t at (*ptr)
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __LDREXW(ptr) ((uint32_t ) __ldrex(ptr))
|
||||
#else
|
||||
#define __LDREXW(ptr) _Pragma("push") _Pragma("diag_suppress 3731") ((uint32_t ) __ldrex(ptr)) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (8 bit)
|
||||
\details Executes a exclusive STR instruction for 8 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXB(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXB(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (16 bit)
|
||||
\details Executes a exclusive STR instruction for 16 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXH(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXH(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief STR Exclusive (32 bit)
|
||||
\details Executes a exclusive STR instruction for 32 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
\return 0 Function succeeded
|
||||
\return 1 Function failed
|
||||
*/
|
||||
#if defined(__ARMCC_VERSION) && (__ARMCC_VERSION < 5060020)
|
||||
#define __STREXW(value, ptr) __strex(value, ptr)
|
||||
#else
|
||||
#define __STREXW(value, ptr) _Pragma("push") _Pragma("diag_suppress 3731") __strex(value, ptr) _Pragma("pop")
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief Remove the exclusive lock
|
||||
\details Removes the exclusive lock which is created by LDREX.
|
||||
*/
|
||||
#define __CLREX __clrex
|
||||
|
||||
|
||||
/**
|
||||
\brief Signed Saturate
|
||||
\details Saturates a signed value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (1..32)
|
||||
\return Saturated value
|
||||
*/
|
||||
#define __SSAT __ssat
|
||||
|
||||
|
||||
/**
|
||||
\brief Unsigned Saturate
|
||||
\details Saturates an unsigned value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (0..31)
|
||||
\return Saturated value
|
||||
*/
|
||||
#define __USAT __usat
|
||||
|
||||
|
||||
/**
|
||||
\brief Rotate Right with Extend (32 bit)
|
||||
\details Moves each bit of a bitstring right by one bit.
|
||||
The carry input is shifted in at the left end of the bitstring.
|
||||
\param [in] value Value to rotate
|
||||
\return Rotated value
|
||||
*/
|
||||
#ifndef __NO_EMBEDDED_ASM
|
||||
__attribute__((section(".rrx_text"))) __STATIC_INLINE __ASM uint32_t __RRX(uint32_t value)
|
||||
{
|
||||
rrx r0, r0
|
||||
bx lr
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (8 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 8 bit value.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint8_t at (*ptr)
|
||||
*/
|
||||
#define __LDRBT(ptr) ((uint8_t ) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (16 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 16 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint16_t at (*ptr)
|
||||
*/
|
||||
#define __LDRHT(ptr) ((uint16_t) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief LDRT Unprivileged (32 bit)
|
||||
\details Executes a Unprivileged LDRT instruction for 32 bit values.
|
||||
\param [in] ptr Pointer to data
|
||||
\return value of type uint32_t at (*ptr)
|
||||
*/
|
||||
#define __LDRT(ptr) ((uint32_t ) __ldrt(ptr))
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (8 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 8 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRBT(value, ptr) __strt(value, ptr)
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (16 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 16 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRHT(value, ptr) __strt(value, ptr)
|
||||
|
||||
|
||||
/**
|
||||
\brief STRT Unprivileged (32 bit)
|
||||
\details Executes a Unprivileged STRT instruction for 32 bit values.
|
||||
\param [in] value Value to store
|
||||
\param [in] ptr Pointer to location
|
||||
*/
|
||||
#define __STRT(value, ptr) __strt(value, ptr)
|
||||
|
||||
#else /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
/**
|
||||
\brief Signed Saturate
|
||||
\details Saturates a signed value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (1..32)
|
||||
\return Saturated value
|
||||
*/
|
||||
__attribute__((always_inline)) __STATIC_INLINE int32_t __SSAT(int32_t val, uint32_t sat)
|
||||
{
|
||||
if ((sat >= 1U) && (sat <= 32U))
|
||||
{
|
||||
const int32_t max = (int32_t)((1U << (sat - 1U)) - 1U);
|
||||
const int32_t min = -1 - max ;
|
||||
if (val > max)
|
||||
{
|
||||
return max;
|
||||
}
|
||||
else if (val < min)
|
||||
{
|
||||
return min;
|
||||
}
|
||||
}
|
||||
return val;
|
||||
}
|
||||
|
||||
/**
|
||||
\brief Unsigned Saturate
|
||||
\details Saturates an unsigned value.
|
||||
\param [in] value Value to be saturated
|
||||
\param [in] sat Bit position to saturate to (0..31)
|
||||
\return Saturated value
|
||||
*/
|
||||
__attribute__((always_inline)) __STATIC_INLINE uint32_t __USAT(int32_t val, uint32_t sat)
|
||||
{
|
||||
if (sat <= 31U)
|
||||
{
|
||||
const uint32_t max = ((1U << sat) - 1U);
|
||||
if (val > (int32_t)max)
|
||||
{
|
||||
return max;
|
||||
}
|
||||
else if (val < 0)
|
||||
{
|
||||
return 0U;
|
||||
}
|
||||
}
|
||||
return (uint32_t)val;
|
||||
}
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7M__ ) && (__ARM_ARCH_7M__ == 1)) || \
|
||||
(defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
|
||||
/*@}*/ /* end of group CMSIS_Core_InstructionInterface */
|
||||
|
||||
|
||||
/* ################### Compiler specific Intrinsics ########################### */
|
||||
/** \defgroup CMSIS_SIMD_intrinsics CMSIS SIMD Intrinsics
|
||||
Access to dedicated SIMD instructions
|
||||
@{
|
||||
*/
|
||||
|
||||
#if ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) )
|
||||
|
||||
#define __SADD8 __sadd8
|
||||
#define __QADD8 __qadd8
|
||||
#define __SHADD8 __shadd8
|
||||
#define __UADD8 __uadd8
|
||||
#define __UQADD8 __uqadd8
|
||||
#define __UHADD8 __uhadd8
|
||||
#define __SSUB8 __ssub8
|
||||
#define __QSUB8 __qsub8
|
||||
#define __SHSUB8 __shsub8
|
||||
#define __USUB8 __usub8
|
||||
#define __UQSUB8 __uqsub8
|
||||
#define __UHSUB8 __uhsub8
|
||||
#define __SADD16 __sadd16
|
||||
#define __QADD16 __qadd16
|
||||
#define __SHADD16 __shadd16
|
||||
#define __UADD16 __uadd16
|
||||
#define __UQADD16 __uqadd16
|
||||
#define __UHADD16 __uhadd16
|
||||
#define __SSUB16 __ssub16
|
||||
#define __QSUB16 __qsub16
|
||||
#define __SHSUB16 __shsub16
|
||||
#define __USUB16 __usub16
|
||||
#define __UQSUB16 __uqsub16
|
||||
#define __UHSUB16 __uhsub16
|
||||
#define __SASX __sasx
|
||||
#define __QASX __qasx
|
||||
#define __SHASX __shasx
|
||||
#define __UASX __uasx
|
||||
#define __UQASX __uqasx
|
||||
#define __UHASX __uhasx
|
||||
#define __SSAX __ssax
|
||||
#define __QSAX __qsax
|
||||
#define __SHSAX __shsax
|
||||
#define __USAX __usax
|
||||
#define __UQSAX __uqsax
|
||||
#define __UHSAX __uhsax
|
||||
#define __USAD8 __usad8
|
||||
#define __USADA8 __usada8
|
||||
#define __SSAT16 __ssat16
|
||||
#define __USAT16 __usat16
|
||||
#define __UXTB16 __uxtb16
|
||||
#define __UXTAB16 __uxtab16
|
||||
#define __SXTB16 __sxtb16
|
||||
#define __SXTAB16 __sxtab16
|
||||
#define __SMUAD __smuad
|
||||
#define __SMUADX __smuadx
|
||||
#define __SMLAD __smlad
|
||||
#define __SMLADX __smladx
|
||||
#define __SMLALD __smlald
|
||||
#define __SMLALDX __smlaldx
|
||||
#define __SMUSD __smusd
|
||||
#define __SMUSDX __smusdx
|
||||
#define __SMLSD __smlsd
|
||||
#define __SMLSDX __smlsdx
|
||||
#define __SMLSLD __smlsld
|
||||
#define __SMLSLDX __smlsldx
|
||||
#define __SEL __sel
|
||||
#define __QADD __qadd
|
||||
#define __QSUB __qsub
|
||||
|
||||
#define __PKHBT(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0x0000FFFFUL) | \
|
||||
((((uint32_t)(ARG2)) << (ARG3)) & 0xFFFF0000UL) )
|
||||
|
||||
#define __PKHTB(ARG1,ARG2,ARG3) ( ((((uint32_t)(ARG1)) ) & 0xFFFF0000UL) | \
|
||||
((((uint32_t)(ARG2)) >> (ARG3)) & 0x0000FFFFUL) )
|
||||
|
||||
#define __SMMLA(ARG1,ARG2,ARG3) ( (int32_t)((((int64_t)(ARG1) * (ARG2)) + \
|
||||
((int64_t)(ARG3) << 32U) ) >> 32U))
|
||||
|
||||
#endif /* ((defined (__ARM_ARCH_7EM__) && (__ARM_ARCH_7EM__ == 1)) ) */
|
||||
/*@} end of group CMSIS_SIMD_intrinsics */
|
||||
|
||||
|
||||
#endif /* __CMSIS_ARMCC_H */
|
||||
1869
Drivers/CMSIS/Include/cmsis_armclang.h
Normal file
1869
Drivers/CMSIS/Include/cmsis_armclang.h
Normal file
File diff suppressed because it is too large
Load Diff
266
Drivers/CMSIS/Include/cmsis_compiler.h
Normal file
266
Drivers/CMSIS/Include/cmsis_compiler.h
Normal file
@@ -0,0 +1,266 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_compiler.h
|
||||
* @brief CMSIS compiler generic header file
|
||||
* @version V5.0.4
|
||||
* @date 10. January 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#ifndef __CMSIS_COMPILER_H
|
||||
#define __CMSIS_COMPILER_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
/*
|
||||
* Arm Compiler 4/5
|
||||
*/
|
||||
#if defined ( __CC_ARM )
|
||||
#include "cmsis_armcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* Arm Compiler 6 (armclang)
|
||||
*/
|
||||
#elif defined (__ARMCC_VERSION) && (__ARMCC_VERSION >= 6010050)
|
||||
#include "cmsis_armclang.h"
|
||||
|
||||
|
||||
/*
|
||||
* GNU Compiler
|
||||
*/
|
||||
#elif defined ( __GNUC__ )
|
||||
#include "cmsis_gcc.h"
|
||||
|
||||
|
||||
/*
|
||||
* IAR Compiler
|
||||
*/
|
||||
#elif defined ( __ICCARM__ )
|
||||
#include <cmsis_iccarm.h>
|
||||
|
||||
|
||||
/*
|
||||
* TI Arm Compiler
|
||||
*/
|
||||
#elif defined ( __TI_ARM__ )
|
||||
#include <cmsis_ccs.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __attribute__((packed))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __attribute__((packed)) T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void*)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __attribute__((aligned(x)))
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* TASKING Compiler
|
||||
*/
|
||||
#elif defined ( __TASKING__ )
|
||||
/*
|
||||
* The CMSIS functions have been implemented as intrinsics in the compiler.
|
||||
* Please use "carm -?i" to get an up to date list of all intrinsics,
|
||||
* Including the CMSIS ones.
|
||||
*/
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM __asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
#define __NO_RETURN __attribute__((noreturn))
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#define __USED __attribute__((used))
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __attribute__((weak))
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT struct __packed__
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION union __packed__
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
struct __packed__ T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#define __ALIGNED(x) __align(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
/*
|
||||
* COSMIC Compiler
|
||||
*/
|
||||
#elif defined ( __CSMC__ )
|
||||
#include <cmsis_csm.h>
|
||||
|
||||
#ifndef __ASM
|
||||
#define __ASM _asm
|
||||
#endif
|
||||
#ifndef __INLINE
|
||||
#define __INLINE inline
|
||||
#endif
|
||||
#ifndef __STATIC_INLINE
|
||||
#define __STATIC_INLINE static inline
|
||||
#endif
|
||||
#ifndef __STATIC_FORCEINLINE
|
||||
#define __STATIC_FORCEINLINE __STATIC_INLINE
|
||||
#endif
|
||||
#ifndef __NO_RETURN
|
||||
// NO RETURN is automatically detected hence no warning here
|
||||
#define __NO_RETURN
|
||||
#endif
|
||||
#ifndef __USED
|
||||
#warning No compiler specific solution for __USED. __USED is ignored.
|
||||
#define __USED
|
||||
#endif
|
||||
#ifndef __WEAK
|
||||
#define __WEAK __weak
|
||||
#endif
|
||||
#ifndef __PACKED
|
||||
#define __PACKED @packed
|
||||
#endif
|
||||
#ifndef __PACKED_STRUCT
|
||||
#define __PACKED_STRUCT @packed struct
|
||||
#endif
|
||||
#ifndef __PACKED_UNION
|
||||
#define __PACKED_UNION @packed union
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32 /* deprecated */
|
||||
@packed struct T_UINT32 { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32(x) (((struct T_UINT32 *)(x))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_WRITE
|
||||
__PACKED_STRUCT T_UINT16_WRITE { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_WRITE(addr, val) (void)((((struct T_UINT16_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT16_READ
|
||||
__PACKED_STRUCT T_UINT16_READ { uint16_t v; };
|
||||
#define __UNALIGNED_UINT16_READ(addr) (((const struct T_UINT16_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_WRITE
|
||||
__PACKED_STRUCT T_UINT32_WRITE { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_WRITE(addr, val) (void)((((struct T_UINT32_WRITE *)(void *)(addr))->v) = (val))
|
||||
#endif
|
||||
#ifndef __UNALIGNED_UINT32_READ
|
||||
__PACKED_STRUCT T_UINT32_READ { uint32_t v; };
|
||||
#define __UNALIGNED_UINT32_READ(addr) (((const struct T_UINT32_READ *)(const void *)(addr))->v)
|
||||
#endif
|
||||
#ifndef __ALIGNED
|
||||
#warning No compiler specific solution for __ALIGNED. __ALIGNED is ignored.
|
||||
#define __ALIGNED(x)
|
||||
#endif
|
||||
#ifndef __RESTRICT
|
||||
#warning No compiler specific solution for __RESTRICT. __RESTRICT is ignored.
|
||||
#define __RESTRICT
|
||||
#endif
|
||||
|
||||
|
||||
#else
|
||||
#error Unknown compiler.
|
||||
#endif
|
||||
|
||||
|
||||
#endif /* __CMSIS_COMPILER_H */
|
||||
|
||||
39
Drivers/CMSIS/Include/cmsis_version.h
Normal file
39
Drivers/CMSIS/Include/cmsis_version.h
Normal file
@@ -0,0 +1,39 @@
|
||||
/**************************************************************************//**
|
||||
* @file cmsis_version.h
|
||||
* @brief CMSIS Core(M) Version definitions
|
||||
* @version V5.0.2
|
||||
* @date 19. April 2017
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2009-2017 ARM Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef __CMSIS_VERSION_H
|
||||
#define __CMSIS_VERSION_H
|
||||
|
||||
/* CMSIS Version definitions */
|
||||
#define __CM_CMSIS_VERSION_MAIN ( 5U) /*!< [31:16] CMSIS Core(M) main version */
|
||||
#define __CM_CMSIS_VERSION_SUB ( 1U) /*!< [15:0] CMSIS Core(M) sub version */
|
||||
#define __CM_CMSIS_VERSION ((__CM_CMSIS_VERSION_MAIN << 16U) | \
|
||||
__CM_CMSIS_VERSION_SUB ) /*!< CMSIS Core(M) version number */
|
||||
#endif
|
||||
1941
Drivers/CMSIS/Include/core_cm3.h
Normal file
1941
Drivers/CMSIS/Include/core_cm3.h
Normal file
File diff suppressed because it is too large
Load Diff
2671
Drivers/CMSIS/Include/core_cm7.h
Normal file
2671
Drivers/CMSIS/Include/core_cm7.h
Normal file
File diff suppressed because it is too large
Load Diff
270
Drivers/CMSIS/Include/mpu_armv7.h
Normal file
270
Drivers/CMSIS/Include/mpu_armv7.h
Normal file
@@ -0,0 +1,270 @@
|
||||
/******************************************************************************
|
||||
* @file mpu_armv7.h
|
||||
* @brief CMSIS MPU API for Armv7-M MPU
|
||||
* @version V5.0.4
|
||||
* @date 10. January 2018
|
||||
******************************************************************************/
|
||||
/*
|
||||
* Copyright (c) 2017-2018 Arm Limited. All rights reserved.
|
||||
*
|
||||
* SPDX-License-Identifier: Apache-2.0
|
||||
*
|
||||
* Licensed under the Apache License, Version 2.0 (the License); you may
|
||||
* not use this file except in compliance with the License.
|
||||
* You may obtain a copy of the License at
|
||||
*
|
||||
* www.apache.org/licenses/LICENSE-2.0
|
||||
*
|
||||
* Unless required by applicable law or agreed to in writing, software
|
||||
* distributed under the License is distributed on an AS IS BASIS, WITHOUT
|
||||
* WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
||||
* See the License for the specific language governing permissions and
|
||||
* limitations under the License.
|
||||
*/
|
||||
|
||||
#if defined ( __ICCARM__ )
|
||||
#pragma system_include /* treat file as system include file for MISRA check */
|
||||
#elif defined (__clang__)
|
||||
#pragma clang system_header /* treat file as system include file */
|
||||
#endif
|
||||
|
||||
#ifndef ARM_MPU_ARMV7_H
|
||||
#define ARM_MPU_ARMV7_H
|
||||
|
||||
#define ARM_MPU_REGION_SIZE_32B ((uint8_t)0x04U) ///!< MPU Region Size 32 Bytes
|
||||
#define ARM_MPU_REGION_SIZE_64B ((uint8_t)0x05U) ///!< MPU Region Size 64 Bytes
|
||||
#define ARM_MPU_REGION_SIZE_128B ((uint8_t)0x06U) ///!< MPU Region Size 128 Bytes
|
||||
#define ARM_MPU_REGION_SIZE_256B ((uint8_t)0x07U) ///!< MPU Region Size 256 Bytes
|
||||
#define ARM_MPU_REGION_SIZE_512B ((uint8_t)0x08U) ///!< MPU Region Size 512 Bytes
|
||||
#define ARM_MPU_REGION_SIZE_1KB ((uint8_t)0x09U) ///!< MPU Region Size 1 KByte
|
||||
#define ARM_MPU_REGION_SIZE_2KB ((uint8_t)0x0AU) ///!< MPU Region Size 2 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_4KB ((uint8_t)0x0BU) ///!< MPU Region Size 4 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_8KB ((uint8_t)0x0CU) ///!< MPU Region Size 8 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_16KB ((uint8_t)0x0DU) ///!< MPU Region Size 16 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_32KB ((uint8_t)0x0EU) ///!< MPU Region Size 32 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_64KB ((uint8_t)0x0FU) ///!< MPU Region Size 64 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_128KB ((uint8_t)0x10U) ///!< MPU Region Size 128 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_256KB ((uint8_t)0x11U) ///!< MPU Region Size 256 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_512KB ((uint8_t)0x12U) ///!< MPU Region Size 512 KBytes
|
||||
#define ARM_MPU_REGION_SIZE_1MB ((uint8_t)0x13U) ///!< MPU Region Size 1 MByte
|
||||
#define ARM_MPU_REGION_SIZE_2MB ((uint8_t)0x14U) ///!< MPU Region Size 2 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_4MB ((uint8_t)0x15U) ///!< MPU Region Size 4 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_8MB ((uint8_t)0x16U) ///!< MPU Region Size 8 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_16MB ((uint8_t)0x17U) ///!< MPU Region Size 16 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_32MB ((uint8_t)0x18U) ///!< MPU Region Size 32 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_64MB ((uint8_t)0x19U) ///!< MPU Region Size 64 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_128MB ((uint8_t)0x1AU) ///!< MPU Region Size 128 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_256MB ((uint8_t)0x1BU) ///!< MPU Region Size 256 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_512MB ((uint8_t)0x1CU) ///!< MPU Region Size 512 MBytes
|
||||
#define ARM_MPU_REGION_SIZE_1GB ((uint8_t)0x1DU) ///!< MPU Region Size 1 GByte
|
||||
#define ARM_MPU_REGION_SIZE_2GB ((uint8_t)0x1EU) ///!< MPU Region Size 2 GBytes
|
||||
#define ARM_MPU_REGION_SIZE_4GB ((uint8_t)0x1FU) ///!< MPU Region Size 4 GBytes
|
||||
|
||||
#define ARM_MPU_AP_NONE 0U ///!< MPU Access Permission no access
|
||||
#define ARM_MPU_AP_PRIV 1U ///!< MPU Access Permission privileged access only
|
||||
#define ARM_MPU_AP_URO 2U ///!< MPU Access Permission unprivileged access read-only
|
||||
#define ARM_MPU_AP_FULL 3U ///!< MPU Access Permission full access
|
||||
#define ARM_MPU_AP_PRO 5U ///!< MPU Access Permission privileged access read-only
|
||||
#define ARM_MPU_AP_RO 6U ///!< MPU Access Permission read-only access
|
||||
|
||||
/** MPU Region Base Address Register Value
|
||||
*
|
||||
* \param Region The region to be configured, number 0 to 15.
|
||||
* \param BaseAddress The base address for the region.
|
||||
*/
|
||||
#define ARM_MPU_RBAR(Region, BaseAddress) \
|
||||
(((BaseAddress) & MPU_RBAR_ADDR_Msk) | \
|
||||
((Region) & MPU_RBAR_REGION_Msk) | \
|
||||
(MPU_RBAR_VALID_Msk))
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attributes
|
||||
*
|
||||
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
|
||||
* \param IsShareable Region is shareable between multiple bus masters.
|
||||
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
|
||||
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
|
||||
*/
|
||||
#define ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable) \
|
||||
((((TypeExtField ) << MPU_RASR_TEX_Pos) & MPU_RASR_TEX_Msk) | \
|
||||
(((IsShareable ) << MPU_RASR_S_Pos) & MPU_RASR_S_Msk) | \
|
||||
(((IsCacheable ) << MPU_RASR_C_Pos) & MPU_RASR_C_Msk) | \
|
||||
(((IsBufferable ) << MPU_RASR_B_Pos) & MPU_RASR_B_Msk))
|
||||
|
||||
/**
|
||||
* MPU Region Attribute and Size Register Value
|
||||
*
|
||||
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
|
||||
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
|
||||
* \param AccessAttributes Memory access attribution, see \ref ARM_MPU_ACCESS_.
|
||||
* \param SubRegionDisable Sub-region disable field.
|
||||
* \param Size Region size of the region to be configured, for example 4K, 8K.
|
||||
*/
|
||||
#define ARM_MPU_RASR_EX(DisableExec, AccessPermission, AccessAttributes, SubRegionDisable, Size) \
|
||||
((((DisableExec ) << MPU_RASR_XN_Pos) & MPU_RASR_XN_Msk) | \
|
||||
(((AccessPermission) << MPU_RASR_AP_Pos) & MPU_RASR_AP_Msk) | \
|
||||
(((AccessAttributes) ) & (MPU_RASR_TEX_Msk | MPU_RASR_S_Msk | MPU_RASR_C_Msk | MPU_RASR_B_Msk)))
|
||||
|
||||
/**
|
||||
* MPU Region Attribute and Size Register Value
|
||||
*
|
||||
* \param DisableExec Instruction access disable bit, 1= disable instruction fetches.
|
||||
* \param AccessPermission Data access permissions, allows you to configure read/write access for User and Privileged mode.
|
||||
* \param TypeExtField Type extension field, allows you to configure memory access type, for example strongly ordered, peripheral.
|
||||
* \param IsShareable Region is shareable between multiple bus masters.
|
||||
* \param IsCacheable Region is cacheable, i.e. its value may be kept in cache.
|
||||
* \param IsBufferable Region is bufferable, i.e. using write-back caching. Cacheable but non-bufferable regions use write-through policy.
|
||||
* \param SubRegionDisable Sub-region disable field.
|
||||
* \param Size Region size of the region to be configured, for example 4K, 8K.
|
||||
*/
|
||||
#define ARM_MPU_RASR(DisableExec, AccessPermission, TypeExtField, IsShareable, IsCacheable, IsBufferable, SubRegionDisable, Size) \
|
||||
ARM_MPU_RASR_EX(DisableExec, AccessPermission, ARM_MPU_ACCESS_(TypeExtField, IsShareable, IsCacheable, IsBufferable), SubRegionDisable, Size)
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute for strongly ordered memory.
|
||||
* - TEX: 000b
|
||||
* - Shareable
|
||||
* - Non-cacheable
|
||||
* - Non-bufferable
|
||||
*/
|
||||
#define ARM_MPU_ACCESS_ORDERED ARM_MPU_ACCESS_(0U, 1U, 0U, 0U)
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute for device memory.
|
||||
* - TEX: 000b (if non-shareable) or 010b (if shareable)
|
||||
* - Shareable or non-shareable
|
||||
* - Non-cacheable
|
||||
* - Bufferable (if shareable) or non-bufferable (if non-shareable)
|
||||
*
|
||||
* \param IsShareable Configures the device memory as shareable or non-shareable.
|
||||
*/
|
||||
#define ARM_MPU_ACCESS_DEVICE(IsShareable) ((IsShareable) ? ARM_MPU_ACCESS_(0U, 1U, 0U, 1U) : ARM_MPU_ACCESS_(2U, 0U, 0U, 0U))
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute for normal memory.
|
||||
* - TEX: 1BBb (reflecting outer cacheability rules)
|
||||
* - Shareable or non-shareable
|
||||
* - Cacheable or non-cacheable (reflecting inner cacheability rules)
|
||||
* - Bufferable or non-bufferable (reflecting inner cacheability rules)
|
||||
*
|
||||
* \param OuterCp Configures the outer cache policy.
|
||||
* \param InnerCp Configures the inner cache policy.
|
||||
* \param IsShareable Configures the memory as shareable or non-shareable.
|
||||
*/
|
||||
#define ARM_MPU_ACCESS_NORMAL(OuterCp, InnerCp, IsShareable) ARM_MPU_ACCESS_((4U | (OuterCp)), IsShareable, ((InnerCp) & 2U), ((InnerCp) & 1U))
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute non-cacheable policy.
|
||||
*/
|
||||
#define ARM_MPU_CACHEP_NOCACHE 0U
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute write-back, write and read allocate policy.
|
||||
*/
|
||||
#define ARM_MPU_CACHEP_WB_WRA 1U
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute write-through, no write allocate policy.
|
||||
*/
|
||||
#define ARM_MPU_CACHEP_WT_NWA 2U
|
||||
|
||||
/**
|
||||
* MPU Memory Access Attribute write-back, no write allocate policy.
|
||||
*/
|
||||
#define ARM_MPU_CACHEP_WB_NWA 3U
|
||||
|
||||
|
||||
/**
|
||||
* Struct for a single MPU Region
|
||||
*/
|
||||
typedef struct {
|
||||
uint32_t RBAR; //!< The region base address register value (RBAR)
|
||||
uint32_t RASR; //!< The region attribute and size register value (RASR) \ref MPU_RASR
|
||||
} ARM_MPU_Region_t;
|
||||
|
||||
/** Enable the MPU.
|
||||
* \param MPU_Control Default access permissions for unconfigured regions.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_Enable(uint32_t MPU_Control)
|
||||
{
|
||||
__DSB();
|
||||
__ISB();
|
||||
MPU->CTRL = MPU_Control | MPU_CTRL_ENABLE_Msk;
|
||||
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
|
||||
SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk;
|
||||
#endif
|
||||
}
|
||||
|
||||
/** Disable the MPU.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_Disable(void)
|
||||
{
|
||||
__DSB();
|
||||
__ISB();
|
||||
#ifdef SCB_SHCSR_MEMFAULTENA_Msk
|
||||
SCB->SHCSR &= ~SCB_SHCSR_MEMFAULTENA_Msk;
|
||||
#endif
|
||||
MPU->CTRL &= ~MPU_CTRL_ENABLE_Msk;
|
||||
}
|
||||
|
||||
/** Clear and disable the given MPU region.
|
||||
* \param rnr Region number to be cleared.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_ClrRegion(uint32_t rnr)
|
||||
{
|
||||
MPU->RNR = rnr;
|
||||
MPU->RASR = 0U;
|
||||
}
|
||||
|
||||
/** Configure an MPU region.
|
||||
* \param rbar Value for RBAR register.
|
||||
* \param rsar Value for RSAR register.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_SetRegion(uint32_t rbar, uint32_t rasr)
|
||||
{
|
||||
MPU->RBAR = rbar;
|
||||
MPU->RASR = rasr;
|
||||
}
|
||||
|
||||
/** Configure the given MPU region.
|
||||
* \param rnr Region number to be configured.
|
||||
* \param rbar Value for RBAR register.
|
||||
* \param rsar Value for RSAR register.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_SetRegionEx(uint32_t rnr, uint32_t rbar, uint32_t rasr)
|
||||
{
|
||||
MPU->RNR = rnr;
|
||||
MPU->RBAR = rbar;
|
||||
MPU->RASR = rasr;
|
||||
}
|
||||
|
||||
/** Memcopy with strictly ordered memory access, e.g. for register targets.
|
||||
* \param dst Destination data is copied to.
|
||||
* \param src Source data is copied from.
|
||||
* \param len Amount of data words to be copied.
|
||||
*/
|
||||
__STATIC_INLINE void orderedCpy(volatile uint32_t* dst, const uint32_t* __RESTRICT src, uint32_t len)
|
||||
{
|
||||
uint32_t i;
|
||||
for (i = 0U; i < len; ++i)
|
||||
{
|
||||
dst[i] = src[i];
|
||||
}
|
||||
}
|
||||
|
||||
/** Load the given number of MPU regions from a table.
|
||||
* \param table Pointer to the MPU configuration table.
|
||||
* \param cnt Amount of regions to be configured.
|
||||
*/
|
||||
__STATIC_INLINE void ARM_MPU_Load(ARM_MPU_Region_t const* table, uint32_t cnt)
|
||||
{
|
||||
const uint32_t rowWordSize = sizeof(ARM_MPU_Region_t)/4U;
|
||||
while (cnt > MPU_TYPE_RALIASES) {
|
||||
orderedCpy(&(MPU->RBAR), &(table->RBAR), MPU_TYPE_RALIASES*rowWordSize);
|
||||
table += MPU_TYPE_RALIASES;
|
||||
cnt -= MPU_TYPE_RALIASES;
|
||||
}
|
||||
orderedCpy(&(MPU->RBAR), &(table->RBAR), cnt*rowWordSize);
|
||||
}
|
||||
|
||||
#endif
|
||||
Reference in New Issue
Block a user