feat(ui): add DI/DO status page showing 8 inputs and 4 outputs

New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.

Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:

  defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
    → ioboard_di_snap_lookup()  [new registration channel]
    → ui_data_feed_tick() (uiTask, 200 ms)
    → ui_data_rt_t.dio_di_* / dio_do_*

No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).

Semantic honesty, recorded in ui_page_di_do.c and README §6:
  · Output state is the software shadow register (ODR mirror), NOT a
    mechanical contact feedback — this platform has no auxiliary contact
    readback path. ioboard_do_read_level() also reads ODR, so comparing
    the two is tautological.
  · IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
    schematic.
  · Input bit order has not been verified by manual shorting. The
    2026-11-16 run read 0x00 eight times because the operator had no time
    to short each channel — the data path itself was fine.
  · Board-level inputs are deliberately kept out of the 33-point telemetry
    bitmap (IEC 104 point-table semantics); the two have no mapping.

Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.

Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.

Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.

Reviewed independently; zero blocking findings.
This commit is contained in:
2026-11-16 21:45:08 +08:00
parent bdc6f2f9b8
commit 2b466b85f0
24 changed files with 1012 additions and 300 deletions
+6
View File
@@ -78,6 +78,12 @@ PAGES = [
# yxp2 再多按 8 次下移,让选中行跨过页边界落到第 2 页首行
("yx", "dedde"),
("yxp2", "dedde dddddddd"),
# 开入开出(node 6,实时数据下第 4 项 = 遥信量之后):d 到实时数据 → e 进(选中交流量)
# → ddd 到开入开出 → e 开页。12 行 / 8 行每页 = 2 页:第 1 页是 8 路开入(DI_A..DI_H),
# 第 2 页是 4 路开出(KO6/TRIP/ERT/CLZ)+ 4 行空白;di_do_p2 再按 8 次下移让选中行
# 落到 row 8 = 第 2 页窗口顶行(first = (8/8)*8),页脚随之变"第 2 页,共 2 页"
("di_do", "deddd e"),
("di_do_p2", "deddd e dddddddd"),
# SOE 记录(node 51,记录查询下第 1 项):6 下进记录查询 → e → 首项 SOE记录 → e;
# 数据 = simulator/main.c 的固定 3 条假记录(含 type 7 未标定闭锁这条非元件支路)
("soe", "dddddde e"),