diff --git a/.mxproject b/.mxproject index a6793c59..a77b1dc1 100644 --- a/.mxproject +++ b/.mxproject @@ -1,14 +1,14 @@ [PreviousLibFiles] -LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\portmacro.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\portmacro.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; +LibFiles=Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\portmacro.h;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;Middlewares\Third_Party\FreeRTOS\Source\croutine.c;Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;Middlewares\Third_Party\FreeRTOS\Source\list.c;Middlewares\Third_Party\FreeRTOS\Source\queue.c;Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;Middlewares\Third_Party\FreeRTOS\Source\tasks.c;Middlewares\Third_Party\FreeRTOS\Source\timers.c;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_tim_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_adc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_adc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_rcc_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_bus.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_rcc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_system.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_utils.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_flash_ramfunc.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_gpio_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_gpio.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dma.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_dmamux.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_pwr_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_pwr.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_cortex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal.h;Drivers\STM32F4xx_HAL_Driver\Inc\Legacy\stm32_hal_legacy.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_def.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_exti.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_i2c.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_i2c_ex.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_iwdg.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_spi.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_tim.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_hal_uart.h;Drivers\STM32F4xx_HAL_Driver\Inc\stm32f4xx_ll_usart.h;Middlewares\Third_Party\FreeRTOS\Source\include\croutine.h;Middlewares\Third_Party\FreeRTOS\Source\include\deprecated_definitions.h;Middlewares\Third_Party\FreeRTOS\Source\include\event_groups.h;Middlewares\Third_Party\FreeRTOS\Source\include\FreeRTOS.h;Middlewares\Third_Party\FreeRTOS\Source\include\list.h;Middlewares\Third_Party\FreeRTOS\Source\include\message_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_prototypes.h;Middlewares\Third_Party\FreeRTOS\Source\include\mpu_wrappers.h;Middlewares\Third_Party\FreeRTOS\Source\include\portable.h;Middlewares\Third_Party\FreeRTOS\Source\include\projdefs.h;Middlewares\Third_Party\FreeRTOS\Source\include\queue.h;Middlewares\Third_Party\FreeRTOS\Source\include\semphr.h;Middlewares\Third_Party\FreeRTOS\Source\include\stack_macros.h;Middlewares\Third_Party\FreeRTOS\Source\include\StackMacros.h;Middlewares\Third_Party\FreeRTOS\Source\include\stream_buffer.h;Middlewares\Third_Party\FreeRTOS\Source\include\task.h;Middlewares\Third_Party\FreeRTOS\Source\include\timers.h;Middlewares\Third_Party\FreeRTOS\Source\include\atomic.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_mpool.h;Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\freertos_os2.h;Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\portmacro.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f407xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Include\system_stm32f4xx.h;Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;Drivers\CMSIS\Include\cachel1_armv7.h;Drivers\CMSIS\Include\cmsis_armcc.h;Drivers\CMSIS\Include\cmsis_armclang.h;Drivers\CMSIS\Include\cmsis_armclang_ltm.h;Drivers\CMSIS\Include\cmsis_compiler.h;Drivers\CMSIS\Include\cmsis_gcc.h;Drivers\CMSIS\Include\cmsis_iccarm.h;Drivers\CMSIS\Include\cmsis_version.h;Drivers\CMSIS\Include\core_armv81mml.h;Drivers\CMSIS\Include\core_armv8mbl.h;Drivers\CMSIS\Include\core_armv8mml.h;Drivers\CMSIS\Include\core_cm0.h;Drivers\CMSIS\Include\core_cm0plus.h;Drivers\CMSIS\Include\core_cm1.h;Drivers\CMSIS\Include\core_cm23.h;Drivers\CMSIS\Include\core_cm3.h;Drivers\CMSIS\Include\core_cm33.h;Drivers\CMSIS\Include\core_cm35p.h;Drivers\CMSIS\Include\core_cm4.h;Drivers\CMSIS\Include\core_cm55.h;Drivers\CMSIS\Include\core_cm7.h;Drivers\CMSIS\Include\core_cm85.h;Drivers\CMSIS\Include\core_sc000.h;Drivers\CMSIS\Include\core_sc300.h;Drivers\CMSIS\Include\core_starmc1.h;Drivers\CMSIS\Include\mpu_armv7.h;Drivers\CMSIS\Include\mpu_armv8.h;Drivers\CMSIS\Include\pac_armv81.h;Drivers\CMSIS\Include\pmu_armv8.h;Drivers\CMSIS\Include\tz_context.h; [PreviousUsedKeilFiles] -SourceFiles=..\Src\main.c;..\Src\gpio.c;..\Src\freertos.c;..\Src\adc.c;..\Src\dma.c;..\Src\i2c.c;..\Src\iwdg.c;..\Src\spi.c;..\Src\usart.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Src\stm32f4xx_hal_timebase_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c;..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;..\Middlewares\Third_Party\FreeRTOS\Source\list.c;..\Middlewares\Third_Party\FreeRTOS\Source\queue.c;..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c;..\Middlewares\Third_Party\FreeRTOS\Source\timers.c;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c;..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;..\Middlewares\Third_Party\FreeRTOS\Source\list.c;..\Middlewares\Third_Party\FreeRTOS\Source\queue.c;..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c;..\Middlewares\Third_Party\FreeRTOS\Source\timers.c;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;;; +SourceFiles=..\Src\main.c;..\Src\gpio.c;..\Src\freertos.c;..\Src\adc.c;..\Src\dma.c;..\Src\i2c.c;..\Src\iwdg.c;..\Src\spi.c;..\Src\tim.c;..\Src\usart.c;..\Src\stm32f4xx_it.c;..\Src\stm32f4xx_hal_msp.c;..\Src\stm32f4xx_hal_timebase_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c;..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;..\Middlewares\Third_Party\FreeRTOS\Source\list.c;..\Middlewares\Third_Party\FreeRTOS\Source\queue.c;..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c;..\Middlewares\Third_Party\FreeRTOS\Source\timers.c;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_tim_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_adc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_rcc_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_flash_ramfunc.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_gpio.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_dma.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_pwr_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_cortex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_exti.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_i2c_ex.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_iwdg.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_spi.c;..\Drivers\STM32F4xx_HAL_Driver\Src\stm32f4xx_hal_uart.c;..\Middlewares\Third_Party\FreeRTOS\Source\croutine.c;..\Middlewares\Third_Party\FreeRTOS\Source\event_groups.c;..\Middlewares\Third_Party\FreeRTOS\Source\list.c;..\Middlewares\Third_Party\FreeRTOS\Source\queue.c;..\Middlewares\Third_Party\FreeRTOS\Source\stream_buffer.c;..\Middlewares\Third_Party\FreeRTOS\Source\tasks.c;..\Middlewares\Third_Party\FreeRTOS\Source\timers.c;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2\cmsis_os2.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\MemMang\heap_4.c;..\Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F\port.c;..\Drivers\CMSIS\Device\ST\STM32F4xx\Source\Templates\system_stm32f4xx.c;..\\Src\system_stm32f4xx.c;;; HeaderPath=..\Drivers\STM32F4xx_HAL_Driver\Inc;..\Drivers\STM32F4xx_HAL_Driver\Inc\Legacy;..\Middlewares\Third_Party\FreeRTOS\Source\include;..\Middlewares\Third_Party\FreeRTOS\Source\CMSIS_RTOS_V2;..\Middlewares\Third_Party\FreeRTOS\Source\portable\RVDS\ARM_CM4F;..\Drivers\CMSIS\Device\ST\STM32F4xx\Include;..\Drivers\CMSIS\Include;..\Inc; CDefines=USE_HAL_DRIVER;STM32F407xx;USE_HAL_DRIVER;USE_HAL_DRIVER; [PreviousGenFiles] HeaderPath=..\Inc -HeaderFiles=gpio.h;FreeRTOSConfig.h;adc.h;dma.h;i2c.h;iwdg.h;spi.h;usart.h;stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; +HeaderFiles=gpio.h;FreeRTOSConfig.h;adc.h;dma.h;i2c.h;iwdg.h;spi.h;tim.h;usart.h;stm32f4xx_it.h;stm32f4xx_hal_conf.h;main.h; SourcePath=..\Src -SourceFiles=gpio.c;freertos.c;adc.c;dma.c;i2c.c;iwdg.c;spi.c;usart.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;stm32f4xx_hal_timebase_tim.c;main.c; +SourceFiles=gpio.c;freertos.c;adc.c;dma.c;i2c.c;iwdg.c;spi.c;tim.c;usart.c;stm32f4xx_it.c;stm32f4xx_hal_msp.c;stm32f4xx_hal_timebase_tim.c;main.c; diff --git a/AGENTS.md b/AGENTS.md index 5a2472b5..e18fd58c 100644 --- a/AGENTS.md +++ b/AGENTS.md @@ -76,11 +76,11 @@ STM32F407ZGTx @168MHz（HSE 8MHz → PLL M=4/N=168/P=2）；**仅 Keil MDK-ARM v `Src/main.c`（CubeMX 初始化）→ `app_main_init` → `osKernelStart` → 7 任务（`osKernelStart` 之前全是内核启动前代码：禁调任何 FreeRTOS/CMSIS-RTOS API，见「平台约束」） -- `app_main_init`（时间子系统优先，使后续日志带时间戳）：`sd2506_init` → `sys_clock_init`（墙钟；RTC 故障时降级默认时间基准并返回 -1 触发"时钟芯片异常"自检；`sys_clock_get` 每 30 天惰性再基准化防 49.7 天 tick 回绕）→ `rs485_init` → `gd5f2gq5ue_init` → `tpafe5160_init` → SD2506 诊断 → `tpafe5160_start_conv_irq`（一次性；**运行期周期 CONVST 触发自 2026-10-10 起由 `adcTask` 接管**，见下） +- `app_main_init`（时间子系统优先，使后续日志带时间戳）：`sd2506_init` → `sys_clock_init`（墙钟；RTC 故障时降级默认时间基准并返回 -1 触发"时钟芯片异常"自检；`sys_clock_get` 每 30 天惰性再基准化防 49.7 天 tick 回绕）→ `rs485_init` → `gd5f2gq5ue_init` → `tpafe5160_init` → SD2506 诊断 → **启动 TIM6 1 kHz 采样节拍**（`HAL_TIM_Base_Start_IT(&htim6)`，2026-10-10；ISR 内触发 CONVST，见下） - **就绪屏障**（`App/app/sys_events.h` Event Flags，取代魔法延时）：`SYS_EVT_NET_READY`（netTask 置位）/ `STORAGE_READY`（defaultTask：卷挂载 + 网络配置加载完成）/ `FTP_READY` / `TIMESYNC_READY`；消费者用 `osEventFlagsWait` 阻塞等待 - netTask：`net_stack_bring_up`（配置已由 defaultTask 在屏障前加载，本任务只读 RAM 副本 → `net_init` + PHY 强制 100M 全双工 → 递增网络代次号）→ 置 NET_READY → 循环 `net_poll` + `net_process_messages`；消费 `SYS_EVT_NET_RECONFIG` → 立即重建网络（新 IP 免重启生效，各 TCP 服务据代次号重建监听） - defaultTask：`f_mount` forced（无卷自动 `f_mkfs` FAT32；挂载后卷健康探针：小写两击确认，FAT 区陈旧/擦除时自动重格式化自愈，`/config.ini` 回落工厂默认——2026-09-20 /log 写失败修复）→ 网络配置加载（`net_cfg_load`；旧档迁移已于 2026-10-10 删除，见「模块约定」网口配置条）→ STORAGE_READY → LED 闪烁；同时是 syslog（`/log/run.log`·`selftest.log`，定长 64B 记录）的**唯一写者**与**配置引擎属主**（`cfg_file` 静态态单任务收敛于此：UI 保存请求执行 `net_cfg_save_run` + 2s `cfg_file_poll`，经 `SYS_EVT_CFG_SAVE` 事件唤醒；netTask/uiTask 不得直接触碰配置引擎，见 P1-3） -- adcTask（**B1，2026-10-10**）：每 1 ms 触发一次 CONVST（`tpafe5160_start_conv_irq()`）→ `tpafe5160_snapshot()` 临界区原子取最新一帧（8 通道）→ 帧统计 + 每 10 s 心跳日志；只取数、不做保护运算（V0.1 仅 TPAFE 三路 `UA`/`UN`/`IA` 测量有效，见 N-18）。手写于 `Src/freertos.c` 的 `USER CODE` 区（同 timeSyncTask，512 words / Normal），纳入 IWDG `required_mask`（`TASK_WD_ADC`）。⚠ 本阶段为**任务周期软触发**；硬件定时器 1 kHz 触发为后续（需 CubeMX 加 TIM） +- adcTask（**B1，2026-10-10**）：**纯消费者**——`tpafe5160_snapshot()` 临界区原子取最新一帧（8 通道）→ 帧统计 + 每 10 s 心跳日志；只取数、不做保护运算（V0.1 仅 TPAFE 三路 `UA`/`UN`/`IA` 测量有效，见 N-18）。**采样节拍（1 kHz）由 TIM6 更新中断硬件触发**（`Src/main.c` 的 `HAL_TIM_PeriodElapsedCallback` 在 TIM6 分支内调 `tpafe5160_start_conv_irq()`，2026-10-10）；本任务 1 ms 轮询仅作消费节奏。手写于 `Src/freertos.c` 的 `USER CODE` 区（同 timeSyncTask，512 words / Normal），纳入 IWDG `required_mask`（`TASK_WD_ADC`）。详见 `docs/子系统设计/ADC采样节拍设计说明.md` - 全景 `docs/架构设计/项目架构总览.md`（六层分层 / 启动时序 / 存储·网络·UI 栈 / 目录组织） ## 硬件引脚 diff --git a/App/app/app_main.c b/App/app/app_main.c index 0c6c2a29..399e25d7 100644 --- a/App/app/app_main.c +++ b/App/app/app_main.c @@ -17,6 +17,7 @@ #include "main.h" /* ST_DIR4_GPIO_Port / ST_DIR4_Pin 等 CubeMX 宏 */ #include "stm32f4xx_it.h" /* fault_handler_enable() */ #include "usart.h" /* huart5 */ +#include "tim.h" /* htim6：1 kHz 采样节拍（TIM6 更新中断触发 CONVST） */ #include "rs485.h" #include "sd2506.h" #include "sys_clock.h" @@ -209,8 +210,10 @@ int app_main_init(void) { sd_vbat / 1000, (sd_vbat % 1000) / 10); } - /* 6) 启动第一次转换（CubeMX 已配置 BUSY EXTI 中断） */ - tpafe5160_start_conv_irq(); + /* 6) 启动 1 kHz 采样节拍：TIM6 更新中断 → ISR 内触发 CONVST（Src/main.c）。 + * ⚠ 必须在 tpafe5160_init() 成功之后启动，否则 ISR 会在驱动首帧自检 + * （E-44 有效性探针）期间乱发 CONVST。消费端 adcTask 退化为纯消费者。 */ + (void)HAL_TIM_Base_Start_IT(&htim6); DBG_INFO("App init OK"); return 0; diff --git a/App/task/adc_task.c b/App/task/adc_task.c index abef23d3..a15b8740 100644 --- a/App/task/adc_task.c +++ b/App/task/adc_task.c @@ -1,12 +1,14 @@ /* * 模块名称：ADC Sampling Task - * 模块功能：TPAFE5160 8 通道同步采样——1ms 采样节拍 + 原子快照消费 + 帧统计 + * 模块功能：TPAFE5160 8 通道同步采样——帧消费 + 帧统计（节拍由 TIM6 硬件定时器提供） * 状态说明：**B1 已落地（2026-10-10）**——本任务从空桩转为真实消费者： - * 每 1ms 触发一次 CONVST，用 tpafe5160_snapshot() 原子取数（AGENTS 铁律）， - * 统计帧数/无新帧次数，并纳入看门狗 required_mask（TASK_WD_ADC）。 - * ⚠ B1 阶段用**任务周期软触发**（osDelayUntil）产生采样节拍，满足 L1-1 - * 判据（BUSY 连续脉冲 + frame_seq 持续递增）；**精确 1 kHz / 等周波调频** - * 的硬件定时器触发为后续（需 CubeMX 加 TIM）。 + * 用 tpafe5160_snapshot() 原子取数（AGENTS 铁律），统计帧数/无新帧次数， + * 并纳入看门狗 required_mask（TASK_WD_ADC）。 + * **采样节拍（v2.2，2026-10-10）**：由 **TIM6 更新中断（1 kHz）** 硬件触发—— + * ISR 内调 tpafe5160_start_conv_irq()（Src/main.c 的 + * HAL_TIM_PeriodElapsedCallback）；本任务**不再自行触发**，退化为**纯消费者**， + * 1ms 轮询（osDelayUntil）仅作消费节奏。详见 + * docs/子系统设计/ADC采样节拍设计说明.md。 * V0.1 上只有 TPAFE 三路（UA/UN/IA）测量有效；本任务只取数，不做保护运算。 * 接入前必读：取数只用 tpafe5160_snapshot()（临界区原子快照，仅任务上下文； * 旧的 get_buf/data_ready/clear_ready 已删除）；接消费者前的强制门禁 @@ -24,6 +26,8 @@ * 为真后落日志。写者未注册时控制台走无锁直发，与 * defaultTask 的存储初始化日志字节级交错（台架实测）； * 就绪前挂起上报，就绪后补报最近一帧。 + * v2.2 2026-10-10 王建锋 采样节拍改由 TIM6 更新中断（1 kHz）硬件触发；本任务 + * 删除自行触发，退化为纯消费者（见文件头"采样节拍"）。 */ #include "adc_task.h" @@ -35,7 +39,7 @@ #define DBG_TAG "[ADC_TASK]" #include "dbg_log.h" -/* 采样节拍周期（ms）。B1：任务周期软触发；硬件定时器方案见文件头说明 */ +/* 消费轮询周期（ms）。采样节拍由 TIM6（1 kHz）提供，本周期仅作消费节奏 */ #define ADC_TASK_BEAT_MS 1U /* 心跳日志周期（ms）：周期性上报帧统计，作为采集链路存活的观测面 */ #define ADC_TASK_REPORT_MS 10000U @@ -65,10 +69,10 @@ int adc_task_init(void) { * 入口参数：arg - FreeRTOS 传入参数（未使用） * 返 回 值：无 * 限定条件：adc_task_init() 已调用；内核已启动 - * 函数说明：每 1ms 触发一次 CONVST（采样节拍），随后原子快照取最新一帧并统计。 - * 首拍无帧属正常（本次转换尚未完成）；之后每拍消费上一拍触发的帧， - * 故稳态下 consumed 每拍 +1、idle 不再增长。idle 持续增长 = EXTI 未在 - * 读帧（异常），由周期心跳日志暴露。 + * 函数说明：每 1ms 原子快照取最新一帧并统计。采样节拍由 TIM6 硬件定时器提供 + * （ISR 内触发 CONVST），本任务不再触发。稳态下 consumed 每拍 +1、 + * idle 不再增长；idle 持续增长 = EXTI 未在读帧或 TIM6 未启动（异常）， + * 由周期心跳日志暴露。 */ void adc_task_func(void *arg) { uint32_t next = osKernelGetTickCount(); @@ -80,10 +84,8 @@ void adc_task_func(void *arg) { for (;;) { int r; - /* 1) 采样节拍：触发一次 CONVST（B1：任务周期软触发） */ - tpafe5160_start_conv_irq(); - - /* 2) 原子快照消费最新一帧（仅任务上下文；1=有新帧 0=无新帧 -1=参数错） */ + /* 1) 原子快照消费最新一帧（仅任务上下文；1=有新帧 0=无新帧 -1=参数错）。 + * 采样节拍由 TIM6 更新中断提供（ISR 内触发 CONVST），本任务不触发。 */ r = tpafe5160_snapshot(s_frame, (uint8_t)TPAFE5160_CH_NUM); if (r == 1) { s_frames_consumed++; @@ -93,7 +95,7 @@ void adc_task_func(void *arg) { /* r == -1：参数错。调用点 count 为常量，不可达；不计入 idle 以区分异常 */ } - /* 2b) 首帧码值上报：**写者就绪后**才落日志。写者未注册时 con_append 走 + /* 2) 首帧码值上报：**写者就绪后**才落日志。写者未注册时 con_append 走 * 无锁直发路径，与 defaultTask 的存储初始化日志会字节级交错 * （2026-10-10 台架实测）；此时挂起上报，就绪后补报最近一帧。 * 只报 TPAFE 三路（UA=buf[6] UN=buf[5] IA=buf[2]），验证取数契约 */ @@ -108,7 +110,7 @@ void adc_task_func(void *arg) { task_wd_beat(TASK_WD_ADC); /* 4) 周期心跳日志：帧统计 + 驱动侧 FRSTDATA 错误计数。 - * 写者就绪前抑制（同 2b 的交错理由）；到点无论是否落日志都推进下个上报点 */ + * 写者就绪前抑制（同 2) 的交错理由）；到点无论是否落日志都推进下个上报点 */ { uint32_t now = osKernelGetTickCount(); diff --git a/Drivers/BSP/TPAFE5160/README.md b/Drivers/BSP/TPAFE5160/README.md index 96eb7146..214a9c5e 100644 --- a/Drivers/BSP/TPAFE5160/README.md +++ b/Drivers/BSP/TPAFE5160/README.md @@ -16,11 +16,11 @@ ## 关键点 -- **首次转换在 `app_main_init` 末尾由 `tpafe5160_start_conv_irq` 启动**（中断驱动）；**运行期周期重触发自 2026-10-10 起由 `adcTask` 接管**（每 1 ms，B1） +- **周期重触发由 TIM6 更新中断（1 kHz）驱动**（2026-10-10）：`app_main_init` 末尾 `HAL_TIM_Base_Start_IT(&htim6)` 启动节拍，`Src/main.c` 的 `HAL_TIM_PeriodElapsedCallback` 在 TIM6 分支内调 `tpafe5160_start_conv_irq()`（ISR 内仅两次 GPIO 写）。B1 阶段曾由 `adcTask` 每 1 ms 软触发（已改） - **取数只用 `tpafe5160_snapshot(int16_t *dst, uint8_t count)`**（**仅任务上下文**，内部临界区原子拷贝；返回 1=新帧 / 0=无新帧 / -1=参数无效）。配套的 `tpafe5160_frame_seq()` 给帧序号、`tpafe5160_frstdata_err()` 给"FRSTDATA 无跳变"帧计数 - ⚠️ **不要用缓冲区指针取数**：旧的 `get_buf()` / `data_ready()` / `clear_ready()` 已于 2026-10-10 **删除**（审计 E-45 / E-58）——`get_buf` 只给指针、任务再逐通道拷，中间被 BUSY EXTI 抢占就拷回**两帧混合**数据；`s_ready` 电平标志在 `start_conv_irq` 里被清 0，等于**用重触发去丢帧**。现由**帧序号**（只增不清）+ **临界区快照**取代 - **`tpafe5160_init()` 做首帧有效性自检**（E-44）：完整跑一帧转换+读取，若整帧读下来 FRSTDATA **没有发生任何跳变**（芯片没在驱动并行总线；板上上拉会把它钉死为高）→ 返回 `TPAFE5160_FRSTDATA_ERR`(-3) 并打 `[ERR] Init FRSTDATA no-toggle`。判据刻意不锁死"哪个 RD 边沿拉高/拉低"（手册只给"RD 下降沿 → FRSTDATA 高/低"两个跳变，本板未实测边沿次序），只要求"一帧内必须跳变" → 既抓死芯片，也不会因极性假设错误误杀好芯片 -- 采样数据的消费者 `App/task/adc_task.c` **已实现**（B1，2026-10-10：每 1 ms 触发 CONVST + `tpafe5160_snapshot()` 原子取数；`adcTask` 在 `Src/freertos.c` 的 `USER CODE` 区创建） +- 采样数据的消费者 `App/task/adc_task.c` **已实现**（B1，2026-10-10：`tpafe5160_snapshot()` 原子取数 + 帧统计；`adcTask` 在 `Src/freertos.c` 的 `USER CODE` 区创建）。**v2.2（2026-10-10）**：采样节拍改由 TIM6 更新中断硬件触发，本任务退化为纯消费者 - CONVST→BUSY→RD 三段时序对**建立/保持时间敏感**，改动需对照芯片手册 - ⚠️ 本项目 ADC 相关功能**新增任务/缓冲前须核算 RAM**（见 `docs/内存管理/`）；接消费者前的强制门禁见根 `AGENTS.md`「接 ADC / RS-485 消费者前的强制门禁」 - ⚠️ **通道语义不是通道号**：`buf[i]` 对应哪个电气量必须查 `docs/硬件平台/ADC通道映射说明.md`（`buf[2]=IA`、`buf[5]=UN`、`buf[6]=UA`）；V0.1 上 8 路电气量分属两片转换器属硬件缺陷（N-18）→ **禁止**跨转换器做相位/功率/功率因数类运算 diff --git a/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h new file mode 100644 index 00000000..a11f5619 --- /dev/null +++ b/Drivers/STM32F4xx_HAL_Driver/Inc/stm32f4xx_ll_tim.h @@ -0,0 +1,4096 @@ +/** + ****************************************************************************** + * @file stm32f4xx_ll_tim.h + * @author MCD Application Team + * @brief Header file of TIM LL module. + ****************************************************************************** + * @attention + * + * Copyright (c) 2016 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ + +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __STM32F4xx_LL_TIM_H +#define __STM32F4xx_LL_TIM_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "stm32f4xx.h" + +/** @addtogroup STM32F4xx_LL_Driver + * @{ + */ + +#if defined (TIM1) || defined (TIM2) || defined (TIM3) || defined (TIM4) || defined (TIM5) || defined (TIM6) || defined (TIM7) || defined (TIM8) || defined (TIM9) || defined (TIM10) || defined (TIM11) || defined (TIM12) || defined (TIM13) || defined (TIM14) + +/** @defgroup TIM_LL TIM + * @{ + */ + +/* Private types -------------------------------------------------------------*/ +/* Private variables ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Variables TIM Private Variables + * @{ + */ +static const uint8_t OFFSET_TAB_CCMRx[] = +{ + 0x00U, /* 0: TIMx_CH1 */ + 0x00U, /* 1: TIMx_CH1N */ + 0x00U, /* 2: TIMx_CH2 */ + 0x00U, /* 3: TIMx_CH2N */ + 0x04U, /* 4: TIMx_CH3 */ + 0x04U, /* 5: TIMx_CH3N */ + 0x04U /* 6: TIMx_CH4 */ +}; + +static const uint8_t SHIFT_TAB_OCxx[] = +{ + 0U, /* 0: OC1M, OC1FE, OC1PE */ + 0U, /* 1: - NA */ + 8U, /* 2: OC2M, OC2FE, OC2PE */ + 0U, /* 3: - NA */ + 0U, /* 4: OC3M, OC3FE, OC3PE */ + 0U, /* 5: - NA */ + 8U /* 6: OC4M, OC4FE, OC4PE */ +}; + +static const uint8_t SHIFT_TAB_ICxx[] = +{ + 0U, /* 0: CC1S, IC1PSC, IC1F */ + 0U, /* 1: - NA */ + 8U, /* 2: CC2S, IC2PSC, IC2F */ + 0U, /* 3: - NA */ + 0U, /* 4: CC3S, IC3PSC, IC3F */ + 0U, /* 5: - NA */ + 8U /* 6: CC4S, IC4PSC, IC4F */ +}; + +static const uint8_t SHIFT_TAB_CCxP[] = +{ + 0U, /* 0: CC1P */ + 2U, /* 1: CC1NP */ + 4U, /* 2: CC2P */ + 6U, /* 3: CC2NP */ + 8U, /* 4: CC3P */ + 10U, /* 5: CC3NP */ + 12U /* 6: CC4P */ +}; + +static const uint8_t SHIFT_TAB_OISx[] = +{ + 0U, /* 0: OIS1 */ + 1U, /* 1: OIS1N */ + 2U, /* 2: OIS2 */ + 3U, /* 3: OIS2N */ + 4U, /* 4: OIS3 */ + 5U, /* 5: OIS3N */ + 6U /* 6: OIS4 */ +}; +/** + * @} + */ + +/* Private constants ---------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Constants TIM Private Constants + * @{ + */ + + +/* Remap mask definitions */ +#define TIMx_OR_RMP_SHIFT 16U +#define TIMx_OR_RMP_MASK 0x0000FFFFU +#define TIM2_OR_RMP_MASK (TIM_OR_ITR1_RMP << TIMx_OR_RMP_SHIFT) +#define TIM5_OR_RMP_MASK (TIM_OR_TI4_RMP << TIMx_OR_RMP_SHIFT) +#define TIM11_OR_RMP_MASK (TIM_OR_TI1_RMP << TIMx_OR_RMP_SHIFT) + +/* Mask used to set the TDG[x:0] of the DTG bits of the TIMx_BDTR register */ +#define DT_DELAY_1 ((uint8_t)0x7F) +#define DT_DELAY_2 ((uint8_t)0x3F) +#define DT_DELAY_3 ((uint8_t)0x1F) +#define DT_DELAY_4 ((uint8_t)0x1F) + +/* Mask used to set the DTG[7:5] bits of the DTG bits of the TIMx_BDTR register */ +#define DT_RANGE_1 ((uint8_t)0x00) +#define DT_RANGE_2 ((uint8_t)0x80) +#define DT_RANGE_3 ((uint8_t)0xC0) +#define DT_RANGE_4 ((uint8_t)0xE0) + + +/** + * @} + */ + +/* Private macros ------------------------------------------------------------*/ +/** @defgroup TIM_LL_Private_Macros TIM Private Macros + * @{ + */ +/** @brief Convert channel id into channel index. + * @param __CHANNEL__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval none + */ +#define TIM_GET_CHANNEL_INDEX( __CHANNEL__) \ + (((__CHANNEL__) == LL_TIM_CHANNEL_CH1) ? 0U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH1N) ? 1U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2) ? 2U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH2N) ? 3U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3) ? 4U :\ + ((__CHANNEL__) == LL_TIM_CHANNEL_CH3N) ? 5U : 6U) + +/** @brief Calculate the deadtime sampling period(in ps). + * @param __TIMCLK__ timer input clock frequency (in Hz). + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval none + */ +#define TIM_CALC_DTS(__TIMCLK__, __CKD__) \ + (((__CKD__) == LL_TIM_CLOCKDIVISION_DIV1) ? ((uint64_t)1000000000000U/(__TIMCLK__)) : \ + ((__CKD__) == LL_TIM_CLOCKDIVISION_DIV2) ? ((uint64_t)1000000000000U/((__TIMCLK__) >> 1U)) : \ + ((uint64_t)1000000000000U/((__TIMCLK__) >> 2U))) +/** + * @} + */ + + +/* Exported types ------------------------------------------------------------*/ +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_ES_INIT TIM Exported Init structure + * @{ + */ + +/** + * @brief TIM Time Base configuration structure definition. + */ +typedef struct +{ + uint16_t Prescaler; /*!< Specifies the prescaler value used to divide the TIM clock. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetPrescaler().*/ + + uint32_t CounterMode; /*!< Specifies the counter mode. + This parameter can be a value of @ref TIM_LL_EC_COUNTERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetCounterMode().*/ + + uint32_t Autoreload; /*!< Specifies the auto reload value to be loaded into the active + Auto-Reload Register at the next update event. + This parameter must be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + Some timer instances may support 32 bits counters. In that case this parameter must + be a number between 0x0000 and 0xFFFFFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetAutoReload().*/ + + uint32_t ClockDivision; /*!< Specifies the clock division. + This parameter can be a value of @ref TIM_LL_EC_CLOCKDIVISION. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetClockDivision().*/ + + uint32_t RepetitionCounter; /*!< Specifies the repetition counter value. Each time the RCR downcounter + reaches zero, an update event is generated and counting restarts + from the RCR value (N). + This means in PWM mode that (N+1) corresponds to: + - the number of PWM periods in edge-aligned mode + - the number of half PWM period in center-aligned mode + GP timers: this parameter must be a number between Min_Data = 0x00 and + Max_Data = 0xFF. + Advanced timers: this parameter must be a number between Min_Data = 0x0000 and + Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetRepetitionCounter().*/ +} LL_TIM_InitTypeDef; + +/** + * @brief TIM Output Compare configuration structure definition. + */ +typedef struct +{ + uint32_t OCMode; /*!< Specifies the output mode. + This parameter can be a value of @ref TIM_LL_EC_OCMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetMode().*/ + + uint32_t OCState; /*!< Specifies the TIM Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t OCNState; /*!< Specifies the TIM complementary Output Compare state. + This parameter can be a value of @ref TIM_LL_EC_OCSTATE. + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_CC_EnableChannel() or @ref LL_TIM_CC_DisableChannel().*/ + + uint32_t CompareValue; /*!< Specifies the Compare value to be loaded into the Capture Compare Register. + This parameter can be a number between Min_Data=0x0000 and Max_Data=0xFFFF. + + This feature can be modified afterwards using unitary function + LL_TIM_OC_SetCompareCHx (x=1..6).*/ + + uint32_t OCPolarity; /*!< Specifies the output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + uint32_t OCNPolarity; /*!< Specifies the complementary output polarity. + This parameter can be a value of @ref TIM_LL_EC_OCPOLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetPolarity().*/ + + + uint32_t OCIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ + + uint32_t OCNIdleState; /*!< Specifies the TIM Output Compare pin state during Idle state. + This parameter can be a value of @ref TIM_LL_EC_OCIDLESTATE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetIdleState().*/ +} LL_TIM_OC_InitTypeDef; + +/** + * @brief TIM Input Capture configuration structure definition. + */ + +typedef struct +{ + + uint32_t ICPolarity; /*!< Specifies the active edge of the input signal. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t ICActiveInput; /*!< Specifies the input. + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t ICPrescaler; /*!< Specifies the Input Capture Prescaler. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t ICFilter; /*!< Specifies the input capture filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ +} LL_TIM_IC_InitTypeDef; + + +/** + * @brief TIM Encoder interface configuration structure definition. + */ +typedef struct +{ + uint32_t EncoderMode; /*!< Specifies the encoder resolution (x2 or x4). + This parameter can be a value of @ref TIM_LL_EC_ENCODERMODE. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetEncoderMode().*/ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1ActiveInput; /*!< Specifies the TI1 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t IC2Polarity; /*!< Specifies the active edge of TI2 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC2ActiveInput; /*!< Specifies the TI2 input source + This parameter can be a value of @ref TIM_LL_EC_ACTIVEINPUT. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetActiveInput().*/ + + uint32_t IC2Prescaler; /*!< Specifies the TI2 input prescaler value. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC2Filter; /*!< Specifies the TI2 input filter. + This parameter can be a value of @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + +} LL_TIM_ENCODER_InitTypeDef; + +/** + * @brief TIM Hall sensor interface configuration structure definition. + */ +typedef struct +{ + + uint32_t IC1Polarity; /*!< Specifies the active edge of TI1 input. + This parameter can be a value of @ref TIM_LL_EC_IC_POLARITY. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPolarity().*/ + + uint32_t IC1Prescaler; /*!< Specifies the TI1 input prescaler value. + Prescaler must be set to get a maximum counter period longer than the + time interval between 2 consecutive changes on the Hall inputs. + This parameter can be a value of @ref TIM_LL_EC_ICPSC. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetPrescaler().*/ + + uint32_t IC1Filter; /*!< Specifies the TI1 input filter. + This parameter can be a value of + @ref TIM_LL_EC_IC_FILTER. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_IC_SetFilter().*/ + + uint32_t CommutationDelay; /*!< Specifies the compare value to be loaded into the Capture Compare Register. + A positive pulse (TRGO event) is generated with a programmable delay every time + a change occurs on the Hall inputs. + This parameter can be a number between Min_Data = 0x0000 and Max_Data = 0xFFFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetCompareCH2().*/ +} LL_TIM_HALLSENSOR_InitTypeDef; + +/** + * @brief BDTR (Break and Dead Time) structure definition + */ +typedef struct +{ + uint32_t OSSRState; /*!< Specifies the Off-State selection used in Run mode. + This parameter can be a value of @ref TIM_LL_EC_OSSR + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t OSSIState; /*!< Specifies the Off-State used in Idle state. + This parameter can be a value of @ref TIM_LL_EC_OSSI + + This feature can be modified afterwards using unitary function + @ref LL_TIM_SetOffStates() + + @note This bit-field cannot be modified as long as LOCK level 2 has been + programmed. */ + + uint32_t LockLevel; /*!< Specifies the LOCK level parameters. + This parameter can be a value of @ref TIM_LL_EC_LOCKLEVEL + + @note The LOCK bits can be written only once after the reset. Once the TIMx_BDTR + register has been written, their content is frozen until the next reset.*/ + + uint8_t DeadTime; /*!< Specifies the delay time between the switching-off and the + switching-on of the outputs. + This parameter can be a number between Min_Data = 0x00 and Max_Data = 0xFF. + + This feature can be modified afterwards using unitary function + @ref LL_TIM_OC_SetDeadTime() + + @note This bit-field can not be modified as long as LOCK level 1, 2 or 3 has been + programmed. */ + + uint16_t BreakState; /*!< Specifies whether the TIM Break input is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_BREAK_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableBRK() or @ref LL_TIM_DisableBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t BreakPolarity; /*!< Specifies the TIM Break Input pin polarity. + This parameter can be a value of @ref TIM_LL_EC_BREAK_POLARITY + + This feature can be modified afterwards using unitary function + @ref LL_TIM_ConfigBRK() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ + + uint32_t AutomaticOutput; /*!< Specifies whether the TIM Automatic Output feature is enabled or not. + This parameter can be a value of @ref TIM_LL_EC_AUTOMATICOUTPUT_ENABLE + + This feature can be modified afterwards using unitary functions + @ref LL_TIM_EnableAutomaticOutput() or @ref LL_TIM_DisableAutomaticOutput() + + @note This bit-field can not be modified as long as LOCK level 1 has been + programmed. */ +} LL_TIM_BDTR_InitTypeDef; + +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/* Exported constants --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Constants TIM Exported Constants + * @{ + */ + +/** @defgroup TIM_LL_EC_GET_FLAG Get Flags Defines + * @brief Flags defines which can be used with LL_TIM_ReadReg function. + * @{ + */ +#define LL_TIM_SR_UIF TIM_SR_UIF /*!< Update interrupt flag */ +#define LL_TIM_SR_CC1IF TIM_SR_CC1IF /*!< Capture/compare 1 interrupt flag */ +#define LL_TIM_SR_CC2IF TIM_SR_CC2IF /*!< Capture/compare 2 interrupt flag */ +#define LL_TIM_SR_CC3IF TIM_SR_CC3IF /*!< Capture/compare 3 interrupt flag */ +#define LL_TIM_SR_CC4IF TIM_SR_CC4IF /*!< Capture/compare 4 interrupt flag */ +#define LL_TIM_SR_COMIF TIM_SR_COMIF /*!< COM interrupt flag */ +#define LL_TIM_SR_TIF TIM_SR_TIF /*!< Trigger interrupt flag */ +#define LL_TIM_SR_BIF TIM_SR_BIF /*!< Break interrupt flag */ +#define LL_TIM_SR_CC1OF TIM_SR_CC1OF /*!< Capture/Compare 1 overcapture flag */ +#define LL_TIM_SR_CC2OF TIM_SR_CC2OF /*!< Capture/Compare 2 overcapture flag */ +#define LL_TIM_SR_CC3OF TIM_SR_CC3OF /*!< Capture/Compare 3 overcapture flag */ +#define LL_TIM_SR_CC4OF TIM_SR_CC4OF /*!< Capture/Compare 4 overcapture flag */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_BREAK_ENABLE Break Enable + * @{ + */ +#define LL_TIM_BREAK_DISABLE 0x00000000U /*!< Break function disabled */ +#define LL_TIM_BREAK_ENABLE TIM_BDTR_BKE /*!< Break function enabled */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_AUTOMATICOUTPUT_ENABLE Automatic output enable + * @{ + */ +#define LL_TIM_AUTOMATICOUTPUT_DISABLE 0x00000000U /*!< MOE can be set only by software */ +#define LL_TIM_AUTOMATICOUTPUT_ENABLE TIM_BDTR_AOE /*!< MOE can be set by software or automatically at the next update event */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_IT IT Defines + * @brief IT defines which can be used with LL_TIM_ReadReg and LL_TIM_WriteReg functions. + * @{ + */ +#define LL_TIM_DIER_UIE TIM_DIER_UIE /*!< Update interrupt enable */ +#define LL_TIM_DIER_CC1IE TIM_DIER_CC1IE /*!< Capture/compare 1 interrupt enable */ +#define LL_TIM_DIER_CC2IE TIM_DIER_CC2IE /*!< Capture/compare 2 interrupt enable */ +#define LL_TIM_DIER_CC3IE TIM_DIER_CC3IE /*!< Capture/compare 3 interrupt enable */ +#define LL_TIM_DIER_CC4IE TIM_DIER_CC4IE /*!< Capture/compare 4 interrupt enable */ +#define LL_TIM_DIER_COMIE TIM_DIER_COMIE /*!< COM interrupt enable */ +#define LL_TIM_DIER_TIE TIM_DIER_TIE /*!< Trigger interrupt enable */ +#define LL_TIM_DIER_BIE TIM_DIER_BIE /*!< Break interrupt enable */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_UPDATESOURCE Update Source + * @{ + */ +#define LL_TIM_UPDATESOURCE_REGULAR 0x00000000U /*!< Counter overflow/underflow, Setting the UG bit or Update generation through the slave mode controller generates an update request */ +#define LL_TIM_UPDATESOURCE_COUNTER TIM_CR1_URS /*!< Only counter overflow/underflow generates an update request */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_ONEPULSEMODE One Pulse Mode + * @{ + */ +#define LL_TIM_ONEPULSEMODE_SINGLE TIM_CR1_OPM /*!< Counter stops counting at the next update event */ +#define LL_TIM_ONEPULSEMODE_REPETITIVE 0x00000000U /*!< Counter is not stopped at update event */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERMODE Counter Mode + * @{ + */ +#define LL_TIM_COUNTERMODE_UP 0x00000000U /*!< Counter used as upcounter */ +#define LL_TIM_COUNTERMODE_DOWN TIM_CR1_DIR /*!< Counter used as downcounter */ +#define LL_TIM_COUNTERMODE_CENTER_DOWN TIM_CR1_CMS_0 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting down. */ +#define LL_TIM_COUNTERMODE_CENTER_UP TIM_CR1_CMS_1 /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up */ +#define LL_TIM_COUNTERMODE_CENTER_UP_DOWN TIM_CR1_CMS /*!< The counter counts up and down alternatively. Output compare interrupt flags of output channels are set only when the counter is counting up or down. */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CLOCKDIVISION Clock Division + * @{ + */ +#define LL_TIM_CLOCKDIVISION_DIV1 0x00000000U /*!< tDTS=tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV2 TIM_CR1_CKD_0 /*!< tDTS=2*tCK_INT */ +#define LL_TIM_CLOCKDIVISION_DIV4 TIM_CR1_CKD_1 /*!< tDTS=4*tCK_INT */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_COUNTERDIRECTION Counter Direction + * @{ + */ +#define LL_TIM_COUNTERDIRECTION_UP 0x00000000U /*!< Timer counter counts up */ +#define LL_TIM_COUNTERDIRECTION_DOWN TIM_CR1_DIR /*!< Timer counter counts down */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCUPDATESOURCE Capture Compare Update Source + * @{ + */ +#define LL_TIM_CCUPDATESOURCE_COMG_ONLY 0x00000000U /*!< Capture/compare control bits are updated by setting the COMG bit only */ +#define LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI TIM_CR2_CCUS /*!< Capture/compare control bits are updated by setting the COMG bit or when a rising edge occurs on trigger input (TRGI) */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CCDMAREQUEST Capture Compare DMA Request + * @{ + */ +#define LL_TIM_CCDMAREQUEST_CC 0x00000000U /*!< CCx DMA request sent when CCx event occurs */ +#define LL_TIM_CCDMAREQUEST_UPDATE TIM_CR2_CCDS /*!< CCx DMA requests sent when update event occurs */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_LOCKLEVEL Lock Level + * @{ + */ +#define LL_TIM_LOCKLEVEL_OFF 0x00000000U /*!< LOCK OFF - No bit is write protected */ +#define LL_TIM_LOCKLEVEL_1 TIM_BDTR_LOCK_0 /*!< LOCK Level 1 */ +#define LL_TIM_LOCKLEVEL_2 TIM_BDTR_LOCK_1 /*!< LOCK Level 2 */ +#define LL_TIM_LOCKLEVEL_3 TIM_BDTR_LOCK /*!< LOCK Level 3 */ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_CHANNEL Channel + * @{ + */ +#define LL_TIM_CHANNEL_CH1 TIM_CCER_CC1E /*!< Timer input/output channel 1 */ +#define LL_TIM_CHANNEL_CH1N TIM_CCER_CC1NE /*!< Timer complementary output channel 1 */ +#define LL_TIM_CHANNEL_CH2 TIM_CCER_CC2E /*!< Timer input/output channel 2 */ +#define LL_TIM_CHANNEL_CH2N TIM_CCER_CC2NE /*!< Timer complementary output channel 2 */ +#define LL_TIM_CHANNEL_CH3 TIM_CCER_CC3E /*!< Timer input/output channel 3 */ +#define LL_TIM_CHANNEL_CH3N TIM_CCER_CC3NE /*!< Timer complementary output channel 3 */ +#define LL_TIM_CHANNEL_CH4 TIM_CCER_CC4E /*!< Timer input/output channel 4 */ +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EC_OCSTATE Output Configuration State + * @{ + */ +#define LL_TIM_OCSTATE_DISABLE 0x00000000U /*!< OCx is not active */ +#define LL_TIM_OCSTATE_ENABLE TIM_CCER_CC1E /*!< OCx signal is output on the corresponding output pin */ +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** @defgroup TIM_LL_EC_OCMODE Output Configuration Mode + * @{ + */ +#define LL_TIM_OCMODE_FROZEN 0x00000000U /*!TIMx_CCRy else active.*/ +#define LL_TIM_OCMODE_PWM2 (TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1 | TIM_CCMR1_OC1M_0) /*!TIMx_CCRy else inactive*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCPOLARITY Output Configuration Polarity + * @{ + */ +#define LL_TIM_OCPOLARITY_HIGH 0x00000000U /*!< OCxactive high*/ +#define LL_TIM_OCPOLARITY_LOW TIM_CCER_CC1P /*!< OCxactive low*/ +/** + * @} + */ + +/** @defgroup TIM_LL_EC_OCIDLESTATE Output Configuration Idle State + * @{ + */ +#define LL_TIM_OCIDLESTATE_LOW 0x00000000U /*!__REG__, (__VALUE__)) + +/** + * @brief Read a value in TIM register. + * @param __INSTANCE__ TIM Instance + * @param __REG__ Register to be read + * @retval Register value + */ +#define LL_TIM_ReadReg(__INSTANCE__, __REG__) READ_REG((__INSTANCE__)->__REG__) +/** + * @} + */ + +/** + * @brief HELPER macro calculating DTG[0:7] in the TIMx_BDTR register to achieve the requested dead time duration. + * @note ex: @ref __LL_TIM_CALC_DEADTIME (80000000, @ref LL_TIM_GetClockDivision (), 120); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CKD__ This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @param __DT__ deadtime duration (in ns) + * @retval DTG[0:7] + */ +#define __LL_TIM_CALC_DEADTIME(__TIMCLK__, __CKD__, __DT__) \ + ( (((uint64_t)((__DT__)*1000U)) < ((DT_DELAY_1+1U) * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(((uint64_t)((__DT__)*1000U) / TIM_CALC_DTS((__TIMCLK__), (__CKD__))) & DT_DELAY_1) : \ + (((uint64_t)((__DT__)*1000U)) < ((64U + (DT_DELAY_2+1U)) * 2U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_2 | ((uint8_t)((uint8_t)((((uint64_t)((__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 1U) - (uint8_t) 64) & DT_DELAY_2)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_3+1U)) * 8U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_3 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 3U) - (uint8_t) 32) & DT_DELAY_3)) :\ + (((uint64_t)((__DT__)*1000U)) < ((32U + (DT_DELAY_4+1U)) * 16U * TIM_CALC_DTS((__TIMCLK__), (__CKD__)))) ? \ + (uint8_t)(DT_RANGE_4 | ((uint8_t)((uint8_t)(((((uint64_t)(__DT__)*1000U))/ TIM_CALC_DTS((__TIMCLK__), \ + (__CKD__))) >> 4U) - (uint8_t) 32) & DT_DELAY_4)) :\ + 0U) + +/** + * @brief HELPER macro calculating the prescaler value to achieve the required counter clock frequency. + * @note ex: @ref __LL_TIM_CALC_PSC (80000000, 1000000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __CNTCLK__ counter clock frequency (in Hz) + * @retval Prescaler value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PSC(__TIMCLK__, __CNTCLK__) \ + (((__TIMCLK__) >= (__CNTCLK__)) ? (uint32_t)((((__TIMCLK__) + (__CNTCLK__)/2U)/(__CNTCLK__)) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required output signal frequency. + * @note ex: @ref __LL_TIM_CALC_ARR (1000000, @ref LL_TIM_GetPrescaler (), 10000); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __FREQ__ output signal frequency (in Hz) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_ARR(__TIMCLK__, __PSC__, __FREQ__) \ + ((((__TIMCLK__)/((__PSC__) + 1U)) >= (__FREQ__)) ? (((__TIMCLK__)/((__FREQ__) * ((__PSC__) + 1U))) - 1U) : 0U) + +/** + * @brief HELPER macro calculating the compare value required to achieve the required timer output compare + * active/inactive delay. + * @note ex: @ref __LL_TIM_CALC_DELAY (1000000, @ref LL_TIM_GetPrescaler (), 10); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @retval Compare value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_DELAY(__TIMCLK__, __PSC__, __DELAY__) \ + ((uint32_t)(((uint64_t)(__TIMCLK__) * (uint64_t)(__DELAY__)) \ + / ((uint64_t)1000000U * (uint64_t)((__PSC__) + 1U)))) + +/** + * @brief HELPER macro calculating the auto-reload value to achieve the required pulse duration + * (when the timer operates in one pulse mode). + * @note ex: @ref __LL_TIM_CALC_PULSE (1000000, @ref LL_TIM_GetPrescaler (), 10, 20); + * @param __TIMCLK__ timer input clock frequency (in Hz) + * @param __PSC__ prescaler + * @param __DELAY__ timer output compare active/inactive delay (in us) + * @param __PULSE__ pulse duration (in us) + * @retval Auto-reload value (between Min_Data=0 and Max_Data=65535) + */ +#define __LL_TIM_CALC_PULSE(__TIMCLK__, __PSC__, __DELAY__, __PULSE__) \ + ((uint32_t)(__LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__PULSE__)) \ + + __LL_TIM_CALC_DELAY((__TIMCLK__), (__PSC__), (__DELAY__)))) + +/** + * @brief HELPER macro retrieving the ratio of the input capture prescaler + * @note ex: @ref __LL_TIM_GET_ICPSC_RATIO (@ref LL_TIM_IC_GetPrescaler ()); + * @param __ICPSC__ This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval Input capture prescaler ratio (1, 2, 4 or 8) + */ +#define __LL_TIM_GET_ICPSC_RATIO(__ICPSC__) \ + ((uint32_t)(0x01U << (((__ICPSC__) >> 16U) >> TIM_CCMR1_IC1PSC_Pos))) + + +/** + * @} + */ + +/* Exported functions --------------------------------------------------------*/ +/** @defgroup TIM_LL_Exported_Functions TIM Exported Functions + * @{ + */ + +/** @defgroup TIM_LL_EF_Time_Base Time Base configuration + * @{ + */ +/** + * @brief Enable timer counter. + * @rmtoll CR1 CEN LL_TIM_EnableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableCounter(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Disable timer counter. + * @rmtoll CR1 CEN LL_TIM_DisableCounter + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableCounter(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_CEN); +} + +/** + * @brief Indicates whether the timer counter is enabled. + * @rmtoll CR1 CEN LL_TIM_IsEnabledCounter + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledCounter(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_CEN) == (TIM_CR1_CEN)) ? 1UL : 0UL); +} + +/** + * @brief Enable update event generation. + * @rmtoll CR1 UDIS LL_TIM_EnableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableUpdateEvent(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Disable update event generation. + * @rmtoll CR1 UDIS LL_TIM_DisableUpdateEvent + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableUpdateEvent(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_UDIS); +} + +/** + * @brief Indicates whether update event generation is enabled. + * @rmtoll CR1 UDIS LL_TIM_IsEnabledUpdateEvent + * @param TIMx Timer instance + * @retval Inverted state of bit (0 or 1). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledUpdateEvent(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_UDIS) == (uint32_t)RESET) ? 1UL : 0UL); +} + +/** + * @brief Set update event source + * @note Update event source set to LL_TIM_UPDATESOURCE_REGULAR: any of the following events + * generate an update interrupt or DMA request if enabled: + * - Counter overflow/underflow + * - Setting the UG bit + * - Update generation through the slave mode controller + * @note Update event source set to LL_TIM_UPDATESOURCE_COUNTER: only counter + * overflow/underflow generates an update interrupt or DMA request if enabled. + * @rmtoll CR1 URS LL_TIM_SetUpdateSource + * @param TIMx Timer instance + * @param UpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetUpdateSource(TIM_TypeDef *TIMx, uint32_t UpdateSource) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_URS, UpdateSource); +} + +/** + * @brief Get actual event update source + * @rmtoll CR1 URS LL_TIM_GetUpdateSource + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_UPDATESOURCE_REGULAR + * @arg @ref LL_TIM_UPDATESOURCE_COUNTER + */ +__STATIC_INLINE uint32_t LL_TIM_GetUpdateSource(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_URS)); +} + +/** + * @brief Set one pulse mode (one shot v.s. repetitive). + * @rmtoll CR1 OPM LL_TIM_SetOnePulseMode + * @param TIMx Timer instance + * @param OnePulseMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOnePulseMode(TIM_TypeDef *TIMx, uint32_t OnePulseMode) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_OPM, OnePulseMode); +} + +/** + * @brief Get actual one pulse mode. + * @rmtoll CR1 OPM LL_TIM_GetOnePulseMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ONEPULSEMODE_SINGLE + * @arg @ref LL_TIM_ONEPULSEMODE_REPETITIVE + */ +__STATIC_INLINE uint32_t LL_TIM_GetOnePulseMode(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_OPM)); +} + +/** + * @brief Set the timer counter counting mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @note Switching from Center Aligned counter mode to Edge counter mode (or reverse) + * requires a timer reset to avoid unexpected direction + * due to DIR bit readonly in center aligned mode. + * @rmtoll CR1 DIR LL_TIM_SetCounterMode\n + * CR1 CMS LL_TIM_SetCounterMode + * @param TIMx Timer instance + * @param CounterMode This parameter can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounterMode(TIM_TypeDef *TIMx, uint32_t CounterMode) +{ + MODIFY_REG(TIMx->CR1, (TIM_CR1_DIR | TIM_CR1_CMS), CounterMode); +} + +/** + * @brief Get actual counter mode. + * @note Macro IS_TIM_COUNTER_MODE_SELECT_INSTANCE(TIMx) can be used to + * check whether or not the counter mode selection feature is supported + * by a timer instance. + * @rmtoll CR1 DIR LL_TIM_GetCounterMode\n + * CR1 CMS LL_TIM_GetCounterMode + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERMODE_UP + * @arg @ref LL_TIM_COUNTERMODE_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP + * @arg @ref LL_TIM_COUNTERMODE_CENTER_DOWN + * @arg @ref LL_TIM_COUNTERMODE_CENTER_UP_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounterMode(const TIM_TypeDef *TIMx) +{ + uint32_t counter_mode; + + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CMS)); + + if (counter_mode == 0U) + { + counter_mode = (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); + } + + return counter_mode; +} + +/** + * @brief Enable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_EnableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableARRPreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Disable auto-reload (ARR) preload. + * @rmtoll CR1 ARPE LL_TIM_DisableARRPreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableARRPreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR1, TIM_CR1_ARPE); +} + +/** + * @brief Indicates whether auto-reload (ARR) preload is enabled. + * @rmtoll CR1 ARPE LL_TIM_IsEnabledARRPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledARRPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR1, TIM_CR1_ARPE) == (TIM_CR1_ARPE)) ? 1UL : 0UL); +} + +/** + * @brief Set the division ratio between the timer clock and the sampling clock used by the dead-time generators + * (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_SetClockDivision + * @param TIMx Timer instance + * @param ClockDivision This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockDivision(TIM_TypeDef *TIMx, uint32_t ClockDivision) +{ + MODIFY_REG(TIMx->CR1, TIM_CR1_CKD, ClockDivision); +} + +/** + * @brief Get the actual division ratio between the timer clock and the sampling clock used by the dead-time + * generators (when supported) and the digital filters. + * @note Macro IS_TIM_CLOCK_DIVISION_INSTANCE(TIMx) can be used to check + * whether or not the clock division feature is supported by the timer + * instance. + * @rmtoll CR1 CKD LL_TIM_GetClockDivision + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CLOCKDIVISION_DIV1 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV2 + * @arg @ref LL_TIM_CLOCKDIVISION_DIV4 + */ +__STATIC_INLINE uint32_t LL_TIM_GetClockDivision(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_CKD)); +} + +/** + * @brief Set the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_SetCounter + * @param TIMx Timer instance + * @param Counter Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetCounter(TIM_TypeDef *TIMx, uint32_t Counter) +{ + WRITE_REG(TIMx->CNT, Counter); +} + +/** + * @brief Get the counter value. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @rmtoll CNT CNT LL_TIM_GetCounter + * @param TIMx Timer instance + * @retval Counter value (between Min_Data=0 and Max_Data=0xFFFF or 0xFFFFFFFF) + */ +__STATIC_INLINE uint32_t LL_TIM_GetCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CNT)); +} + +/** + * @brief Get the current direction of the counter + * @rmtoll CR1 DIR LL_TIM_GetDirection + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_COUNTERDIRECTION_UP + * @arg @ref LL_TIM_COUNTERDIRECTION_DOWN + */ +__STATIC_INLINE uint32_t LL_TIM_GetDirection(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR1, TIM_CR1_DIR)); +} + +/** + * @brief Set the prescaler value. + * @note The counter clock frequency CK_CNT is equal to fCK_PSC / (PSC[15:0] + 1). + * @note The prescaler can be changed on the fly as this control register is buffered. The new + * prescaler ratio is taken into account at the next update event. + * @note Helper macro @ref __LL_TIM_CALC_PSC can be used to calculate the Prescaler parameter + * @rmtoll PSC PSC LL_TIM_SetPrescaler + * @param TIMx Timer instance + * @param Prescaler between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Prescaler) +{ + WRITE_REG(TIMx->PSC, Prescaler); +} + +/** + * @brief Get the prescaler value. + * @rmtoll PSC PSC LL_TIM_GetPrescaler + * @param TIMx Timer instance + * @retval Prescaler value between Min_Data=0 and Max_Data=65535 + */ +__STATIC_INLINE uint32_t LL_TIM_GetPrescaler(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->PSC)); +} + +/** + * @brief Set the auto-reload value. + * @note The counter is blocked while the auto-reload value is null. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Helper macro @ref __LL_TIM_CALC_ARR can be used to calculate the AutoReload parameter + * @rmtoll ARR ARR LL_TIM_SetAutoReload + * @param TIMx Timer instance + * @param AutoReload between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetAutoReload(TIM_TypeDef *TIMx, uint32_t AutoReload) +{ + WRITE_REG(TIMx->ARR, AutoReload); +} + +/** + * @brief Get the auto-reload value. + * @rmtoll ARR ARR LL_TIM_GetAutoReload + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @param TIMx Timer instance + * @retval Auto-reload value + */ +__STATIC_INLINE uint32_t LL_TIM_GetAutoReload(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->ARR)); +} + +/** + * @brief Set the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_SetRepetitionCounter + * @param TIMx Timer instance + * @param RepetitionCounter between Min_Data=0 and Max_Data=255 or 65535 for advanced timer. + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRepetitionCounter(TIM_TypeDef *TIMx, uint32_t RepetitionCounter) +{ + WRITE_REG(TIMx->RCR, RepetitionCounter); +} + +/** + * @brief Get the repetition counter value. + * @note Macro IS_TIM_REPETITION_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a repetition counter. + * @rmtoll RCR REP LL_TIM_GetRepetitionCounter + * @param TIMx Timer instance + * @retval Repetition counter value + */ +__STATIC_INLINE uint32_t LL_TIM_GetRepetitionCounter(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->RCR)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Capture_Compare Capture Compare configuration + * @{ + */ +/** + * @brief Enable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note CCxE, CCxNE and OCxM bits are preloaded, after having been written, + * they are updated only when a commutation event (COM) occurs. + * @note Only on channels that have a complementary output. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_EnablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnablePreload(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Disable the capture/compare control bits (CCxE, CCxNE and OCxM) preload. + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCPC LL_TIM_CC_DisablePreload + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisablePreload(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_CCPC); +} + +/** + * @brief Indicates whether the capture/compare control bits (CCxE, CCxNE and OCxM) preload is enabled. + * @rmtoll CR2 CCPC LL_TIM_CC_IsEnabledPreload + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledPreload(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_CCPC) == (TIM_CR2_CCPC)) ? 1UL : 0UL); +} + +/** + * @brief Set the updated source of the capture/compare control bits (CCxE, CCxNE and OCxM). + * @note Macro IS_TIM_COMMUTATION_EVENT_INSTANCE(TIMx) can be used to check + * whether or not a timer instance is able to generate a commutation event. + * @rmtoll CR2 CCUS LL_TIM_CC_SetUpdate + * @param TIMx Timer instance + * @param CCUpdateSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_ONLY + * @arg @ref LL_TIM_CCUPDATESOURCE_COMG_AND_TRGI + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetUpdate(TIM_TypeDef *TIMx, uint32_t CCUpdateSource) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCUS, CCUpdateSource); +} + +/** + * @brief Set the trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_SetDMAReqTrigger + * @param TIMx Timer instance + * @param DMAReqTrigger This parameter can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetDMAReqTrigger(TIM_TypeDef *TIMx, uint32_t DMAReqTrigger) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_CCDS, DMAReqTrigger); +} + +/** + * @brief Get actual trigger of the capture/compare DMA request. + * @rmtoll CR2 CCDS LL_TIM_CC_GetDMAReqTrigger + * @param TIMx Timer instance + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_CCDMAREQUEST_CC + * @arg @ref LL_TIM_CCDMAREQUEST_UPDATE + */ +__STATIC_INLINE uint32_t LL_TIM_CC_GetDMAReqTrigger(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_BIT(TIMx->CR2, TIM_CR2_CCDS)); +} + +/** + * @brief Set the lock level to freeze the + * configuration of several capture/compare parameters. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * the lock mechanism is supported by a timer instance. + * @rmtoll BDTR LOCK LL_TIM_CC_SetLockLevel + * @param TIMx Timer instance + * @param LockLevel This parameter can be one of the following values: + * @arg @ref LL_TIM_LOCKLEVEL_OFF + * @arg @ref LL_TIM_LOCKLEVEL_1 + * @arg @ref LL_TIM_LOCKLEVEL_2 + * @arg @ref LL_TIM_LOCKLEVEL_3 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_SetLockLevel(TIM_TypeDef *TIMx, uint32_t LockLevel) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_LOCK, LockLevel); +} + +/** + * @brief Enable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_EnableChannel\n + * CCER CC1NE LL_TIM_CC_EnableChannel\n + * CCER CC2E LL_TIM_CC_EnableChannel\n + * CCER CC2NE LL_TIM_CC_EnableChannel\n + * CCER CC3E LL_TIM_CC_EnableChannel\n + * CCER CC3NE LL_TIM_CC_EnableChannel\n + * CCER CC4E LL_TIM_CC_EnableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_EnableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + SET_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Disable capture/compare channels. + * @rmtoll CCER CC1E LL_TIM_CC_DisableChannel\n + * CCER CC1NE LL_TIM_CC_DisableChannel\n + * CCER CC2E LL_TIM_CC_DisableChannel\n + * CCER CC2NE LL_TIM_CC_DisableChannel\n + * CCER CC3E LL_TIM_CC_DisableChannel\n + * CCER CC3NE LL_TIM_CC_DisableChannel\n + * CCER CC4E LL_TIM_CC_DisableChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_CC_DisableChannel(TIM_TypeDef *TIMx, uint32_t Channels) +{ + CLEAR_BIT(TIMx->CCER, Channels); +} + +/** + * @brief Indicate whether channel(s) is(are) enabled. + * @rmtoll CCER CC1E LL_TIM_CC_IsEnabledChannel\n + * CCER CC1NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC2E LL_TIM_CC_IsEnabledChannel\n + * CCER CC2NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC3E LL_TIM_CC_IsEnabledChannel\n + * CCER CC3NE LL_TIM_CC_IsEnabledChannel\n + * CCER CC4E LL_TIM_CC_IsEnabledChannel + * @param TIMx Timer instance + * @param Channels This parameter can be a combination of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_CC_IsEnabledChannel(const TIM_TypeDef *TIMx, uint32_t Channels) +{ + return ((READ_BIT(TIMx->CCER, Channels) == (Channels)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Output_Channel Output channel configuration + * @{ + */ +/** + * @brief Configure an output channel. + * @rmtoll CCMR1 CC1S LL_TIM_OC_ConfigOutput\n + * CCMR1 CC2S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC3S LL_TIM_OC_ConfigOutput\n + * CCMR2 CC4S LL_TIM_OC_ConfigOutput\n + * CCER CC1P LL_TIM_OC_ConfigOutput\n + * CCER CC2P LL_TIM_OC_ConfigOutput\n + * CCER CC3P LL_TIM_OC_ConfigOutput\n + * CCER CC4P LL_TIM_OC_ConfigOutput\n + * CR2 OIS1 LL_TIM_OC_ConfigOutput\n + * CR2 OIS2 LL_TIM_OC_ConfigOutput\n + * CR2 OIS3 LL_TIM_OC_ConfigOutput\n + * CR2 OIS4 LL_TIM_OC_ConfigOutput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH or @ref LL_TIM_OCPOLARITY_LOW + * @arg @ref LL_TIM_OCIDLESTATE_LOW or @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_ConfigOutput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_CC1S << SHIFT_TAB_OCxx[iChannel])); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), + (Configuration & TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), + (Configuration & TIM_CR2_OIS1) << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Define the behavior of the output reference signal OCxREF from which + * OCx and OCxN (when relevant) are derived. + * @rmtoll CCMR1 OC1M LL_TIM_OC_SetMode\n + * CCMR1 OC2M LL_TIM_OC_SetMode\n + * CCMR2 OC3M LL_TIM_OC_SetMode\n + * CCMR2 OC4M LL_TIM_OC_SetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Mode This parameter can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetMode(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Mode) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel]), Mode << SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Get the output compare mode of an output channel. + * @rmtoll CCMR1 OC1M LL_TIM_OC_GetMode\n + * CCMR1 OC2M LL_TIM_OC_GetMode\n + * CCMR2 OC3M LL_TIM_OC_GetMode\n + * CCMR2 OC4M LL_TIM_OC_GetMode + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCMODE_FROZEN + * @arg @ref LL_TIM_OCMODE_ACTIVE + * @arg @ref LL_TIM_OCMODE_INACTIVE + * @arg @ref LL_TIM_OCMODE_TOGGLE + * @arg @ref LL_TIM_OCMODE_FORCED_INACTIVE + * @arg @ref LL_TIM_OCMODE_FORCED_ACTIVE + * @arg @ref LL_TIM_OCMODE_PWM1 + * @arg @ref LL_TIM_OCMODE_PWM2 + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetMode(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return (READ_BIT(*pReg, ((TIM_CCMR1_OC1M | TIM_CCMR1_CC1S) << SHIFT_TAB_OCxx[iChannel])) >> SHIFT_TAB_OCxx[iChannel]); +} + +/** + * @brief Set the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_SetPolarity\n + * CCER CC1NP LL_TIM_OC_SetPolarity\n + * CCER CC2P LL_TIM_OC_SetPolarity\n + * CCER CC2NP LL_TIM_OC_SetPolarity\n + * CCER CC3P LL_TIM_OC_SetPolarity\n + * CCER CC3NP LL_TIM_OC_SetPolarity\n + * CCER CC4P LL_TIM_OC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Polarity This parameter can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Polarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel]), Polarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the polarity of an output channel. + * @rmtoll CCER CC1P LL_TIM_OC_GetPolarity\n + * CCER CC1NP LL_TIM_OC_GetPolarity\n + * CCER CC2P LL_TIM_OC_GetPolarity\n + * CCER CC2NP LL_TIM_OC_GetPolarity\n + * CCER CC3P LL_TIM_OC_GetPolarity\n + * CCER CC3NP LL_TIM_OC_GetPolarity\n + * CCER CC4P LL_TIM_OC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCPOLARITY_HIGH + * @arg @ref LL_TIM_OCPOLARITY_LOW + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, (TIM_CCER_CC1P << SHIFT_TAB_CCxP[iChannel])) >> SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the IDLE state of an output channel + * @note This function is significant only for the timer instances + * supporting the break feature. Macro IS_TIM_BREAK_INSTANCE(TIMx) + * can be used to check whether or not a timer instance provides + * a break input. + * @rmtoll CR2 OIS1 LL_TIM_OC_SetIdleState\n + * CR2 OIS1N LL_TIM_OC_SetIdleState\n + * CR2 OIS2 LL_TIM_OC_SetIdleState\n + * CR2 OIS2N LL_TIM_OC_SetIdleState\n + * CR2 OIS3 LL_TIM_OC_SetIdleState\n + * CR2 OIS3N LL_TIM_OC_SetIdleState\n + * CR2 OIS4 LL_TIM_OC_SetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param IdleState This parameter can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetIdleState(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t IdleState) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel]), IdleState << SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Get the IDLE state of an output channel + * @rmtoll CR2 OIS1 LL_TIM_OC_GetIdleState\n + * CR2 OIS1N LL_TIM_OC_GetIdleState\n + * CR2 OIS2 LL_TIM_OC_GetIdleState\n + * CR2 OIS2N LL_TIM_OC_GetIdleState\n + * CR2 OIS3 LL_TIM_OC_GetIdleState\n + * CR2 OIS3N LL_TIM_OC_GetIdleState\n + * CR2 OIS4 LL_TIM_OC_GetIdleState + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH1N + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH2N + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH3N + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_OCIDLESTATE_LOW + * @arg @ref LL_TIM_OCIDLESTATE_HIGH + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetIdleState(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CR2, (TIM_CR2_OIS1 << SHIFT_TAB_OISx[iChannel])) >> SHIFT_TAB_OISx[iChannel]); +} + +/** + * @brief Enable fast mode for the output channel. + * @note Acts only if the channel is configured in PWM1 or PWM2 mode. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_EnableFast\n + * CCMR1 OC2FE LL_TIM_OC_EnableFast\n + * CCMR2 OC3FE LL_TIM_OC_EnableFast\n + * CCMR2 OC4FE LL_TIM_OC_EnableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Disable fast mode for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_DisableFast\n + * CCMR1 OC2FE LL_TIM_OC_DisableFast\n + * CCMR2 OC3FE LL_TIM_OC_DisableFast\n + * CCMR2 OC4FE LL_TIM_OC_DisableFast + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableFast(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel])); + +} + +/** + * @brief Indicates whether fast mode is enabled for the output channel. + * @rmtoll CCMR1 OC1FE LL_TIM_OC_IsEnabledFast\n + * CCMR1 OC2FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC3FE LL_TIM_OC_IsEnabledFast\n + * CCMR2 OC4FE LL_TIM_OC_IsEnabledFast\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledFast(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1FE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_EnablePreload\n + * CCMR1 OC2PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC3PE LL_TIM_OC_EnablePreload\n + * CCMR2 OC4PE LL_TIM_OC_EnablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable compare register (TIMx_CCRx) preload for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_DisablePreload\n + * CCMR1 OC2PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC3PE LL_TIM_OC_DisablePreload\n + * CCMR2 OC4PE LL_TIM_OC_DisablePreload + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisablePreload(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates whether compare register (TIMx_CCRx) preload is enabled for the output channel. + * @rmtoll CCMR1 OC1PE LL_TIM_OC_IsEnabledPreload\n + * CCMR1 OC2PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC3PE LL_TIM_OC_IsEnabledPreload\n + * CCMR2 OC4PE LL_TIM_OC_IsEnabledPreload\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledPreload(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1PE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Enable clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_EnableClear\n + * CCMR1 OC2CE LL_TIM_OC_EnableClear\n + * CCMR2 OC3CE LL_TIM_OC_EnableClear\n + * CCMR2 OC4CE LL_TIM_OC_EnableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_EnableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + SET_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Disable clearing the output channel on an external event. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_DisableClear\n + * CCMR1 OC2CE LL_TIM_OC_DisableClear\n + * CCMR2 OC3CE LL_TIM_OC_DisableClear\n + * CCMR2 OC4CE LL_TIM_OC_DisableClear + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_DisableClear(TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + CLEAR_BIT(*pReg, (TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel])); +} + +/** + * @brief Indicates clearing the output channel on an external event is enabled for the output channel. + * @note This function enables clearing the output channel on an external event. + * @note This function can only be used in Output compare and PWM modes. It does not work in Forced mode. + * @note Macro IS_TIM_OCXREF_CLEAR_INSTANCE(TIMx) can be used to check whether + * or not a timer instance can clear the OCxREF signal on an external event. + * @rmtoll CCMR1 OC1CE LL_TIM_OC_IsEnabledClear\n + * CCMR1 OC2CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC3CE LL_TIM_OC_IsEnabledClear\n + * CCMR2 OC4CE LL_TIM_OC_IsEnabledClear\n + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_OC_IsEnabledClear(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + uint32_t bitfield = TIM_CCMR1_OC1CE << SHIFT_TAB_OCxx[iChannel]; + return ((READ_BIT(*pReg, bitfield) == bitfield) ? 1UL : 0UL); +} + +/** + * @brief Set the dead-time delay (delay inserted between the rising edge of the OCxREF signal and the rising edge of + * the Ocx and OCxN signals). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * dead-time insertion feature is supported by a timer instance. + * @note Helper macro @ref __LL_TIM_CALC_DEADTIME can be used to calculate the DeadTime parameter + * @rmtoll BDTR DTG LL_TIM_OC_SetDeadTime + * @param TIMx Timer instance + * @param DeadTime between Min_Data=0 and Max_Data=255 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetDeadTime(TIM_TypeDef *TIMx, uint32_t DeadTime) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_DTG, DeadTime); +} + +/** + * @brief Set compare value for output channel 1 (TIMx_CCR1). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_SetCompareCH1 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH1(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR1, CompareValue); +} + +/** + * @brief Set compare value for output channel 2 (TIMx_CCR2). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_SetCompareCH2 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH2(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR2, CompareValue); +} + +/** + * @brief Set compare value for output channel 3 (TIMx_CCR3). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_SetCompareCH3 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH3(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR3, CompareValue); +} + +/** + * @brief Set compare value for output channel 4 (TIMx_CCR4). + * @note In 32-bit timer implementations compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_SetCompareCH4 + * @param TIMx Timer instance + * @param CompareValue between Min_Data=0 and Max_Data=65535 + * @retval None + */ +__STATIC_INLINE void LL_TIM_OC_SetCompareCH4(TIM_TypeDef *TIMx, uint32_t CompareValue) +{ + WRITE_REG(TIMx->CCR4, CompareValue); +} + +/** + * @brief Get compare value (TIMx_CCR1) set for output channel 1. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * output channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_OC_GetCompareCH1 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get compare value (TIMx_CCR2) set for output channel 2. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * output channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_OC_GetCompareCH2 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get compare value (TIMx_CCR3) set for output channel 3. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * output channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_OC_GetCompareCH3 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get compare value (TIMx_CCR4) set for output channel 4. + * @note In 32-bit timer implementations returned compare value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * output channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_OC_GetCompareCH4 + * @param TIMx Timer instance + * @retval CompareValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_OC_GetCompareCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Input_Channel Input channel configuration + * @{ + */ +/** + * @brief Configure input channel. + * @rmtoll CCMR1 CC1S LL_TIM_IC_Config\n + * CCMR1 IC1PSC LL_TIM_IC_Config\n + * CCMR1 IC1F LL_TIM_IC_Config\n + * CCMR1 CC2S LL_TIM_IC_Config\n + * CCMR1 IC2PSC LL_TIM_IC_Config\n + * CCMR1 IC2F LL_TIM_IC_Config\n + * CCMR2 CC3S LL_TIM_IC_Config\n + * CCMR2 IC3PSC LL_TIM_IC_Config\n + * CCMR2 IC3F LL_TIM_IC_Config\n + * CCMR2 CC4S LL_TIM_IC_Config\n + * CCMR2 IC4PSC LL_TIM_IC_Config\n + * CCMR2 IC4F LL_TIM_IC_Config\n + * CCER CC1P LL_TIM_IC_Config\n + * CCER CC1NP LL_TIM_IC_Config\n + * CCER CC2P LL_TIM_IC_Config\n + * CCER CC2NP LL_TIM_IC_Config\n + * CCER CC3P LL_TIM_IC_Config\n + * CCER CC3NP LL_TIM_IC_Config\n + * CCER CC4P LL_TIM_IC_Config\n + * CCER CC4NP LL_TIM_IC_Config + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param Configuration This parameter must be a combination of all the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI or @ref LL_TIM_ACTIVEINPUT_INDIRECTTI or @ref LL_TIM_ACTIVEINPUT_TRC + * @arg @ref LL_TIM_ICPSC_DIV1 or ... or @ref LL_TIM_ICPSC_DIV8 + * @arg @ref LL_TIM_IC_FILTER_FDIV1 or ... or @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @arg @ref LL_TIM_IC_POLARITY_RISING or @ref LL_TIM_IC_POLARITY_FALLING or @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_Config(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t Configuration) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), + ((Configuration >> 16U) & (TIM_CCMR1_IC1F | TIM_CCMR1_IC1PSC | TIM_CCMR1_CC1S)) \ + << SHIFT_TAB_ICxx[iChannel]); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + (Configuration & (TIM_CCER_CC1NP | TIM_CCER_CC1P)) << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Set the active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_SetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_SetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_SetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICActiveInput This parameter can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetActiveInput(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICActiveInput) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel]), (ICActiveInput >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current active input. + * @rmtoll CCMR1 CC1S LL_TIM_IC_GetActiveInput\n + * CCMR1 CC2S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC3S LL_TIM_IC_GetActiveInput\n + * CCMR2 CC4S LL_TIM_IC_GetActiveInput + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ACTIVEINPUT_DIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_INDIRECTTI + * @arg @ref LL_TIM_ACTIVEINPUT_TRC + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetActiveInput(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_CC1S) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the prescaler of input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_SetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_SetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_SetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPrescaler(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPrescaler) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel]), (ICPrescaler >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the current prescaler value acting on an input channel. + * @rmtoll CCMR1 IC1PSC LL_TIM_IC_GetPrescaler\n + * CCMR1 IC2PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC3PSC LL_TIM_IC_GetPrescaler\n + * CCMR2 IC4PSC LL_TIM_IC_GetPrescaler + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_ICPSC_DIV1 + * @arg @ref LL_TIM_ICPSC_DIV2 + * @arg @ref LL_TIM_ICPSC_DIV4 + * @arg @ref LL_TIM_ICPSC_DIV8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPrescaler(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1PSC) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_SetFilter\n + * CCMR1 IC2F LL_TIM_IC_SetFilter\n + * CCMR2 IC3F LL_TIM_IC_SetFilter\n + * CCMR2 IC4F LL_TIM_IC_SetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetFilter(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICFilter) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + MODIFY_REG(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel]), (ICFilter >> 16U) << SHIFT_TAB_ICxx[iChannel]); +} + +/** + * @brief Get the input filter duration. + * @rmtoll CCMR1 IC1F LL_TIM_IC_GetFilter\n + * CCMR1 IC2F LL_TIM_IC_GetFilter\n + * CCMR2 IC3F LL_TIM_IC_GetFilter\n + * CCMR2 IC4F LL_TIM_IC_GetFilter + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_FILTER_FDIV1 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_IC_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_IC_FILTER_FDIV32_N8 + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetFilter(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + const __IO uint32_t *pReg = (__IO uint32_t *)((uint32_t)((uint32_t)(&TIMx->CCMR1) + OFFSET_TAB_CCMRx[iChannel])); + return ((READ_BIT(*pReg, ((TIM_CCMR1_IC1F) << SHIFT_TAB_ICxx[iChannel])) >> SHIFT_TAB_ICxx[iChannel]) << 16U); +} + +/** + * @brief Set the input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_SetPolarity\n + * CCER CC1NP LL_TIM_IC_SetPolarity\n + * CCER CC2P LL_TIM_IC_SetPolarity\n + * CCER CC2NP LL_TIM_IC_SetPolarity\n + * CCER CC3P LL_TIM_IC_SetPolarity\n + * CCER CC3NP LL_TIM_IC_SetPolarity\n + * CCER CC4P LL_TIM_IC_SetPolarity\n + * CCER CC4NP LL_TIM_IC_SetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @param ICPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_SetPolarity(TIM_TypeDef *TIMx, uint32_t Channel, uint32_t ICPolarity) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + MODIFY_REG(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel]), + ICPolarity << SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Get the current input channel polarity. + * @rmtoll CCER CC1P LL_TIM_IC_GetPolarity\n + * CCER CC1NP LL_TIM_IC_GetPolarity\n + * CCER CC2P LL_TIM_IC_GetPolarity\n + * CCER CC2NP LL_TIM_IC_GetPolarity\n + * CCER CC3P LL_TIM_IC_GetPolarity\n + * CCER CC3NP LL_TIM_IC_GetPolarity\n + * CCER CC4P LL_TIM_IC_GetPolarity\n + * CCER CC4NP LL_TIM_IC_GetPolarity + * @param TIMx Timer instance + * @param Channel This parameter can be one of the following values: + * @arg @ref LL_TIM_CHANNEL_CH1 + * @arg @ref LL_TIM_CHANNEL_CH2 + * @arg @ref LL_TIM_CHANNEL_CH3 + * @arg @ref LL_TIM_CHANNEL_CH4 + * @retval Returned value can be one of the following values: + * @arg @ref LL_TIM_IC_POLARITY_RISING + * @arg @ref LL_TIM_IC_POLARITY_FALLING + * @arg @ref LL_TIM_IC_POLARITY_BOTHEDGE + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetPolarity(const TIM_TypeDef *TIMx, uint32_t Channel) +{ + uint8_t iChannel = TIM_GET_CHANNEL_INDEX(Channel); + return (READ_BIT(TIMx->CCER, ((TIM_CCER_CC1NP | TIM_CCER_CC1P) << SHIFT_TAB_CCxP[iChannel])) >> + SHIFT_TAB_CCxP[iChannel]); +} + +/** + * @brief Connect the TIMx_CH1, CH2 and CH3 pins to the TI1 input (XOR combination). + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_EnableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_EnableXORCombination(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Disconnect the TIMx_CH1, CH2 and CH3 pins from the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_DisableXORCombination + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_IC_DisableXORCombination(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->CR2, TIM_CR2_TI1S); +} + +/** + * @brief Indicates whether the TIMx_CH1, CH2 and CH3 pins are connectected to the TI1 input. + * @note Macro IS_TIM_XOR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an XOR input. + * @rmtoll CR2 TI1S LL_TIM_IC_IsEnabledXORCombination + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IC_IsEnabledXORCombination(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->CR2, TIM_CR2_TI1S) == (TIM_CR2_TI1S)) ? 1UL : 0UL); +} + +/** + * @brief Get captured value for input channel 1. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC1_INSTANCE(TIMx) can be used to check whether or not + * input channel 1 is supported by a timer instance. + * @rmtoll CCR1 CCR1 LL_TIM_IC_GetCaptureCH1 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH1(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR1)); +} + +/** + * @brief Get captured value for input channel 2. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC2_INSTANCE(TIMx) can be used to check whether or not + * input channel 2 is supported by a timer instance. + * @rmtoll CCR2 CCR2 LL_TIM_IC_GetCaptureCH2 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH2(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR2)); +} + +/** + * @brief Get captured value for input channel 3. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC3_INSTANCE(TIMx) can be used to check whether or not + * input channel 3 is supported by a timer instance. + * @rmtoll CCR3 CCR3 LL_TIM_IC_GetCaptureCH3 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH3(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR3)); +} + +/** + * @brief Get captured value for input channel 4. + * @note In 32-bit timer implementations returned captured value can be between 0x00000000 and 0xFFFFFFFF. + * @note Macro IS_TIM_32B_COUNTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports a 32 bits counter. + * @note Macro IS_TIM_CC4_INSTANCE(TIMx) can be used to check whether or not + * input channel 4 is supported by a timer instance. + * @rmtoll CCR4 CCR4 LL_TIM_IC_GetCaptureCH4 + * @param TIMx Timer instance + * @retval CapturedValue (between Min_Data=0 and Max_Data=65535) + */ +__STATIC_INLINE uint32_t LL_TIM_IC_GetCaptureCH4(const TIM_TypeDef *TIMx) +{ + return (uint32_t)(READ_REG(TIMx->CCR4)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Clock_Selection Counter clock selection + * @{ + */ +/** + * @brief Enable external clock mode 2. + * @note When external clock mode 2 is enabled the counter is clocked by any active edge on the ETRF signal. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_EnableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableExternalClock(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Disable external clock mode 2. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_DisableExternalClock + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableExternalClock(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_ECE); +} + +/** + * @brief Indicate whether external clock mode 2 is enabled. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR ECE LL_TIM_IsEnabledExternalClock + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledExternalClock(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_ECE) == (TIM_SMCR_ECE)) ? 1UL : 0UL); +} + +/** + * @brief Set the clock source of the counter clock. + * @note when selected clock source is external clock mode 1, the timer input + * the external clock is applied is selected by calling the @ref LL_TIM_SetTriggerInput() + * function. This timer input must be configured by calling + * the @ref LL_TIM_IC_Config() function. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE1_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode1. + * @note Macro IS_TIM_CLOCKSOURCE_ETRMODE2_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports external clock mode2. + * @rmtoll SMCR SMS LL_TIM_SetClockSource\n + * SMCR ECE LL_TIM_SetClockSource + * @param TIMx Timer instance + * @param ClockSource This parameter can be one of the following values: + * @arg @ref LL_TIM_CLOCKSOURCE_INTERNAL + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE1 + * @arg @ref LL_TIM_CLOCKSOURCE_EXT_MODE2 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetClockSource(TIM_TypeDef *TIMx, uint32_t ClockSource) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS | TIM_SMCR_ECE, ClockSource); +} + +/** + * @brief Set the encoder interface mode. + * @note Macro IS_TIM_ENCODER_INTERFACE_INSTANCE(TIMx) can be used to check + * whether or not a timer instance supports the encoder mode. + * @rmtoll SMCR SMS LL_TIM_SetEncoderMode + * @param TIMx Timer instance + * @param EncoderMode This parameter can be one of the following values: + * @arg @ref LL_TIM_ENCODERMODE_X2_TI1 + * @arg @ref LL_TIM_ENCODERMODE_X2_TI2 + * @arg @ref LL_TIM_ENCODERMODE_X4_TI12 + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetEncoderMode(TIM_TypeDef *TIMx, uint32_t EncoderMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, EncoderMode); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Synchronization Timer synchronisation configuration + * @{ + */ +/** + * @brief Set the trigger output (TRGO) used for timer synchronization . + * @note Macro IS_TIM_MASTER_INSTANCE(TIMx) can be used to check + * whether or not a timer instance can operate as a master timer. + * @rmtoll CR2 MMS LL_TIM_SetTriggerOutput + * @param TIMx Timer instance + * @param TimerSynchronization This parameter can be one of the following values: + * @arg @ref LL_TIM_TRGO_RESET + * @arg @ref LL_TIM_TRGO_ENABLE + * @arg @ref LL_TIM_TRGO_UPDATE + * @arg @ref LL_TIM_TRGO_CC1IF + * @arg @ref LL_TIM_TRGO_OC1REF + * @arg @ref LL_TIM_TRGO_OC2REF + * @arg @ref LL_TIM_TRGO_OC3REF + * @arg @ref LL_TIM_TRGO_OC4REF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerOutput(TIM_TypeDef *TIMx, uint32_t TimerSynchronization) +{ + MODIFY_REG(TIMx->CR2, TIM_CR2_MMS, TimerSynchronization); +} + +/** + * @brief Set the synchronization mode of a slave timer. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR SMS LL_TIM_SetSlaveMode + * @param TIMx Timer instance + * @param SlaveMode This parameter can be one of the following values: + * @arg @ref LL_TIM_SLAVEMODE_DISABLED + * @arg @ref LL_TIM_SLAVEMODE_RESET + * @arg @ref LL_TIM_SLAVEMODE_GATED + * @arg @ref LL_TIM_SLAVEMODE_TRIGGER + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetSlaveMode(TIM_TypeDef *TIMx, uint32_t SlaveMode) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_SMS, SlaveMode); +} + +/** + * @brief Set the selects the trigger input to be used to synchronize the counter. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR TS LL_TIM_SetTriggerInput + * @param TIMx Timer instance + * @param TriggerInput This parameter can be one of the following values: + * @arg @ref LL_TIM_TS_ITR0 + * @arg @ref LL_TIM_TS_ITR1 + * @arg @ref LL_TIM_TS_ITR2 + * @arg @ref LL_TIM_TS_ITR3 + * @arg @ref LL_TIM_TS_TI1F_ED + * @arg @ref LL_TIM_TS_TI1FP1 + * @arg @ref LL_TIM_TS_TI2FP2 + * @arg @ref LL_TIM_TS_ETRF + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetTriggerInput(TIM_TypeDef *TIMx, uint32_t TriggerInput) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_TS, TriggerInput); +} + +/** + * @brief Enable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_EnableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Disable the Master/Slave mode. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_DisableMasterSlaveMode + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableMasterSlaveMode(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->SMCR, TIM_SMCR_MSM); +} + +/** + * @brief Indicates whether the Master/Slave mode is enabled. + * @note Macro IS_TIM_SLAVE_INSTANCE(TIMx) can be used to check whether or not + * a timer instance can operate as a slave timer. + * @rmtoll SMCR MSM LL_TIM_IsEnabledMasterSlaveMode + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledMasterSlaveMode(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SMCR, TIM_SMCR_MSM) == (TIM_SMCR_MSM)) ? 1UL : 0UL); +} + +/** + * @brief Configure the external trigger (ETR) input. + * @note Macro IS_TIM_ETR_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides an external trigger input. + * @rmtoll SMCR ETP LL_TIM_ConfigETR\n + * SMCR ETPS LL_TIM_ConfigETR\n + * SMCR ETF LL_TIM_ConfigETR + * @param TIMx Timer instance + * @param ETRPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_POLARITY_NONINVERTED + * @arg @ref LL_TIM_ETR_POLARITY_INVERTED + * @param ETRPrescaler This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_PRESCALER_DIV1 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV2 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV4 + * @arg @ref LL_TIM_ETR_PRESCALER_DIV8 + * @param ETRFilter This parameter can be one of the following values: + * @arg @ref LL_TIM_ETR_FILTER_FDIV1 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N2 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N4 + * @arg @ref LL_TIM_ETR_FILTER_FDIV1_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV2_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV4_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV8_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV16_N8 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N5 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N6 + * @arg @ref LL_TIM_ETR_FILTER_FDIV32_N8 + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigETR(TIM_TypeDef *TIMx, uint32_t ETRPolarity, uint32_t ETRPrescaler, + uint32_t ETRFilter) +{ + MODIFY_REG(TIMx->SMCR, TIM_SMCR_ETP | TIM_SMCR_ETPS | TIM_SMCR_ETF, ETRPolarity | ETRPrescaler | ETRFilter); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Break_Function Break function configuration + * @{ + */ +/** + * @brief Enable the break function. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKE LL_TIM_EnableBRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + SET_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Disable the break function. + * @rmtoll BDTR BKE LL_TIM_DisableBRK + * @param TIMx Timer instance + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableBRK(TIM_TypeDef *TIMx) +{ + __IO uint32_t tmpreg; + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_BKE); + /* Note: Any write operation to this bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Configure the break input. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR BKP LL_TIM_ConfigBRK + * @param TIMx Timer instance + * @param BreakPolarity This parameter can be one of the following values: + * @arg @ref LL_TIM_BREAK_POLARITY_LOW + * @arg @ref LL_TIM_BREAK_POLARITY_HIGH + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigBRK(TIM_TypeDef *TIMx, uint32_t BreakPolarity) +{ + __IO uint32_t tmpreg; + MODIFY_REG(TIMx->BDTR, TIM_BDTR_BKP, BreakPolarity); + /* Note: Any write operation to BKP bit takes a delay of 1 APB clock cycle to become effective. */ + tmpreg = READ_REG(TIMx->BDTR); + (void)(tmpreg); +} + +/** + * @brief Select the outputs off state (enabled v.s. disabled) in Idle and Run modes. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR OSSI LL_TIM_SetOffStates\n + * BDTR OSSR LL_TIM_SetOffStates + * @param TIMx Timer instance + * @param OffStateIdle This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSI_DISABLE + * @arg @ref LL_TIM_OSSI_ENABLE + * @param OffStateRun This parameter can be one of the following values: + * @arg @ref LL_TIM_OSSR_DISABLE + * @arg @ref LL_TIM_OSSR_ENABLE + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetOffStates(TIM_TypeDef *TIMx, uint32_t OffStateIdle, uint32_t OffStateRun) +{ + MODIFY_REG(TIMx->BDTR, TIM_BDTR_OSSI | TIM_BDTR_OSSR, OffStateIdle | OffStateRun); +} + +/** + * @brief Enable automatic output (MOE can be set by software or automatically when a break input is active). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_EnableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAutomaticOutput(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Disable automatic output (MOE can be set only by software). + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_DisableAutomaticOutput + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAutomaticOutput(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_AOE); +} + +/** + * @brief Indicate whether automatic output is enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR AOE LL_TIM_IsEnabledAutomaticOutput + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAutomaticOutput(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_AOE) == (TIM_BDTR_AOE)) ? 1UL : 0UL); +} + +/** + * @brief Enable the outputs (set the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_EnableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableAllOutputs(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Disable the outputs (reset the MOE bit in TIMx_BDTR register). + * @note The MOE bit in TIMx_BDTR register allows to enable /disable the outputs by + * software and is reset in case of break or break2 event. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_DisableAllOutputs + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableAllOutputs(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->BDTR, TIM_BDTR_MOE); +} + +/** + * @brief Indicates whether outputs are enabled. + * @note Macro IS_TIM_BREAK_INSTANCE(TIMx) can be used to check whether or not + * a timer instance provides a break input. + * @rmtoll BDTR MOE LL_TIM_IsEnabledAllOutputs + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledAllOutputs(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->BDTR, TIM_BDTR_MOE) == (TIM_BDTR_MOE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Burst_Mode DMA burst mode configuration + * @{ + */ +/** + * @brief Configures the timer DMA burst feature. + * @note Macro IS_TIM_DMABURST_INSTANCE(TIMx) can be used to check whether or + * not a timer instance supports the DMA burst mode. + * @rmtoll DCR DBL LL_TIM_ConfigDMABurst\n + * DCR DBA LL_TIM_ConfigDMABurst + * @param TIMx Timer instance + * @param DMABurstBaseAddress This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_SMCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_DIER + * @arg @ref LL_TIM_DMABURST_BASEADDR_SR + * @arg @ref LL_TIM_DMABURST_BASEADDR_EGR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCMR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCER + * @arg @ref LL_TIM_DMABURST_BASEADDR_CNT + * @arg @ref LL_TIM_DMABURST_BASEADDR_PSC + * @arg @ref LL_TIM_DMABURST_BASEADDR_ARR + * @arg @ref LL_TIM_DMABURST_BASEADDR_RCR + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR1 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR2 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR3 + * @arg @ref LL_TIM_DMABURST_BASEADDR_CCR4 + * @arg @ref LL_TIM_DMABURST_BASEADDR_BDTR + * @param DMABurstLength This parameter can be one of the following values: + * @arg @ref LL_TIM_DMABURST_LENGTH_1TRANSFER + * @arg @ref LL_TIM_DMABURST_LENGTH_2TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_3TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_4TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_5TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_6TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_7TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_8TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_9TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_10TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_11TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_12TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_13TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_14TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_15TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_16TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_17TRANSFERS + * @arg @ref LL_TIM_DMABURST_LENGTH_18TRANSFERS + * @retval None + */ +__STATIC_INLINE void LL_TIM_ConfigDMABurst(TIM_TypeDef *TIMx, uint32_t DMABurstBaseAddress, uint32_t DMABurstLength) +{ + MODIFY_REG(TIMx->DCR, (TIM_DCR_DBL | TIM_DCR_DBA), (DMABurstBaseAddress | DMABurstLength)); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_Timer_Inputs_Remapping Timer input remapping + * @{ + */ +/** + * @brief Remap TIM inputs (input channel, internal/external triggers). + * @note Macro IS_TIM_REMAP_INSTANCE(TIMx) can be used to check whether or not + * a some timer inputs can be remapped. + * @rmtoll TIM1_OR ITR2_RMP LL_TIM_SetRemap\n + * TIM2_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM5_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM5_OR TI4_RMP LL_TIM_SetRemap\n + * TIM9_OR ITR1_RMP LL_TIM_SetRemap\n + * TIM11_OR TI1_RMP LL_TIM_SetRemap\n + * LPTIM1_OR OR LL_TIM_SetRemap + * @param TIMx Timer instance + * @param Remap Remap param depends on the TIMx. Description available only + * in CHM version of the User Manual (not in .pdf). + * Otherwise see Reference Manual description of OR registers. + * + * Below description summarizes "Timer Instance" and "Remap" param combinations: + * + * TIM1: one of the following values + * + * ITR2_RMP can be one of the following values + * @arg @ref LL_TIM_TIM1_ITR2_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM1_ITR2_RMP_LPTIM (*) + * + * TIM2: one of the following values + * + * ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM2_ITR1_RMP_TIM8_TRGO + * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_FS_SOF + * @arg @ref LL_TIM_TIM2_ITR1_RMP_OTG_HS_SOF + * + * TIM5: one of the following values + * + * @arg @ref LL_TIM_TIM5_TI4_RMP_GPIO + * @arg @ref LL_TIM_TIM5_TI4_RMP_LSI + * @arg @ref LL_TIM_TIM5_TI4_RMP_LSE + * @arg @ref LL_TIM_TIM5_TI4_RMP_RTC + * @arg @ref LL_TIM_TIM5_ITR1_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM5_ITR1_RMP_LPTIM (*) + * + * TIM9: one of the following values + * + * ITR1_RMP can be one of the following values + * @arg @ref LL_TIM_TIM9_ITR1_RMP_TIM3_TRGO (*) + * @arg @ref LL_TIM_TIM9_ITR1_RMP_LPTIM (*) + * + * TIM11: one of the following values + * + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO1 (*) + * @arg @ref LL_TIM_TIM11_TI1_RMP_HSE_RTC + * @arg @ref LL_TIM_TIM11_TI1_RMP_GPIO2 + * @arg @ref LL_TIM_TIM11_TI1_RMP_SPDIFRX (*) + * + * (*) Value not defined in all devices. \n + * + * @retval None + */ +__STATIC_INLINE void LL_TIM_SetRemap(TIM_TypeDef *TIMx, uint32_t Remap) +{ +#if defined(LPTIM_OR_TIM1_ITR2_RMP) && defined(LPTIM_OR_TIM5_ITR1_RMP) && defined(LPTIM_OR_TIM9_ITR1_RMP) + if ((Remap & LL_TIM_LPTIM_REMAP_MASK) == LL_TIM_LPTIM_REMAP_MASK) + { + /* Connect TIMx internal trigger to LPTIM1 output */ + SET_BIT(RCC->APB1ENR, RCC_APB1ENR_LPTIM1EN); + MODIFY_REG(LPTIM1->OR, + (LPTIM_OR_TIM1_ITR2_RMP | LPTIM_OR_TIM5_ITR1_RMP | LPTIM_OR_TIM9_ITR1_RMP), + Remap & ~(LL_TIM_LPTIM_REMAP_MASK)); + } + else + { + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); + } +#else + MODIFY_REG(TIMx->OR, (Remap >> TIMx_OR_RMP_SHIFT), (Remap & TIMx_OR_RMP_MASK)); +#endif /* LPTIM_OR_TIM1_ITR2_RMP && LPTIM_OR_TIM5_ITR1_RMP && LPTIM_OR_TIM9_ITR1_RMP */ +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_FLAG_Management FLAG-Management + * @{ + */ +/** + * @brief Clear the update interrupt flag (UIF). + * @rmtoll SR UIF LL_TIM_ClearFlag_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_UPDATE(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_UIF)); +} + +/** + * @brief Indicate whether update interrupt flag (UIF) is set (update interrupt is pending). + * @rmtoll SR UIF LL_TIM_IsActiveFlag_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_UIF) == (TIM_SR_UIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 interrupt flag (CC1F). + * @rmtoll SR CC1IF LL_TIM_ClearFlag_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1IF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 interrupt flag (CC1F) is set (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1IF LL_TIM_IsActiveFlag_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1IF) == (TIM_SR_CC1IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 interrupt flag (CC2F). + * @rmtoll SR CC2IF LL_TIM_ClearFlag_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2IF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 interrupt flag (CC2F) is set (Capture/Compare 2 interrupt is pending). + * @rmtoll SR CC2IF LL_TIM_IsActiveFlag_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2IF) == (TIM_SR_CC2IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 interrupt flag (CC3F). + * @rmtoll SR CC3IF LL_TIM_ClearFlag_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3IF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 interrupt flag (CC3F) is set (Capture/Compare 3 interrupt is pending). + * @rmtoll SR CC3IF LL_TIM_IsActiveFlag_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3IF) == (TIM_SR_CC3IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 interrupt flag (CC4F). + * @rmtoll SR CC4IF LL_TIM_ClearFlag_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4IF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 interrupt flag (CC4F) is set (Capture/Compare 4 interrupt is pending). + * @rmtoll SR CC4IF LL_TIM_IsActiveFlag_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4IF) == (TIM_SR_CC4IF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the commutation interrupt flag (COMIF). + * @rmtoll SR COMIF LL_TIM_ClearFlag_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_COM(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_COMIF)); +} + +/** + * @brief Indicate whether commutation interrupt flag (COMIF) is set (commutation interrupt is pending). + * @rmtoll SR COMIF LL_TIM_IsActiveFlag_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_COMIF) == (TIM_SR_COMIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the trigger interrupt flag (TIF). + * @rmtoll SR TIF LL_TIM_ClearFlag_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_TRIG(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_TIF)); +} + +/** + * @brief Indicate whether trigger interrupt flag (TIF) is set (trigger interrupt is pending). + * @rmtoll SR TIF LL_TIM_IsActiveFlag_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_TIF) == (TIM_SR_TIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the break interrupt flag (BIF). + * @rmtoll SR BIF LL_TIM_ClearFlag_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_BRK(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_BIF)); +} + +/** + * @brief Indicate whether break interrupt flag (BIF) is set (break interrupt is pending). + * @rmtoll SR BIF LL_TIM_IsActiveFlag_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_BIF) == (TIM_SR_BIF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 1 over-capture interrupt flag (CC1OF). + * @rmtoll SR CC1OF LL_TIM_ClearFlag_CC1OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC1OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC1OF)); +} + +/** + * @brief Indicate whether Capture/Compare 1 over-capture interrupt flag (CC1OF) is set + * (Capture/Compare 1 interrupt is pending). + * @rmtoll SR CC1OF LL_TIM_IsActiveFlag_CC1OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC1OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC1OF) == (TIM_SR_CC1OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 2 over-capture interrupt flag (CC2OF). + * @rmtoll SR CC2OF LL_TIM_ClearFlag_CC2OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC2OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC2OF)); +} + +/** + * @brief Indicate whether Capture/Compare 2 over-capture interrupt flag (CC2OF) is set + * (Capture/Compare 2 over-capture interrupt is pending). + * @rmtoll SR CC2OF LL_TIM_IsActiveFlag_CC2OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC2OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC2OF) == (TIM_SR_CC2OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 3 over-capture interrupt flag (CC3OF). + * @rmtoll SR CC3OF LL_TIM_ClearFlag_CC3OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC3OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC3OF)); +} + +/** + * @brief Indicate whether Capture/Compare 3 over-capture interrupt flag (CC3OF) is set + * (Capture/Compare 3 over-capture interrupt is pending). + * @rmtoll SR CC3OF LL_TIM_IsActiveFlag_CC3OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC3OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC3OF) == (TIM_SR_CC3OF)) ? 1UL : 0UL); +} + +/** + * @brief Clear the Capture/Compare 4 over-capture interrupt flag (CC4OF). + * @rmtoll SR CC4OF LL_TIM_ClearFlag_CC4OVR + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_ClearFlag_CC4OVR(TIM_TypeDef *TIMx) +{ + WRITE_REG(TIMx->SR, ~(TIM_SR_CC4OF)); +} + +/** + * @brief Indicate whether Capture/Compare 4 over-capture interrupt flag (CC4OF) is set + * (Capture/Compare 4 over-capture interrupt is pending). + * @rmtoll SR CC4OF LL_TIM_IsActiveFlag_CC4OVR + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsActiveFlag_CC4OVR(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->SR, TIM_SR_CC4OF) == (TIM_SR_CC4OF)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_IT_Management IT-Management + * @{ + */ +/** + * @brief Enable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_EnableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Disable update interrupt (UIE). + * @rmtoll DIER UIE LL_TIM_DisableIT_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UIE); +} + +/** + * @brief Indicates whether the update interrupt (UIE) is enabled. + * @rmtoll DIER UIE LL_TIM_IsEnabledIT_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UIE) == (TIM_DIER_UIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_EnableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Disable capture/compare 1 interrupt (CC1IE). + * @rmtoll DIER CC1IE LL_TIM_DisableIT_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1IE); +} + +/** + * @brief Indicates whether the capture/compare 1 interrupt (CC1IE) is enabled. + * @rmtoll DIER CC1IE LL_TIM_IsEnabledIT_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1IE) == (TIM_DIER_CC1IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_EnableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Disable capture/compare 2 interrupt (CC2IE). + * @rmtoll DIER CC2IE LL_TIM_DisableIT_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2IE); +} + +/** + * @brief Indicates whether the capture/compare 2 interrupt (CC2IE) is enabled. + * @rmtoll DIER CC2IE LL_TIM_IsEnabledIT_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2IE) == (TIM_DIER_CC2IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_EnableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Disable capture/compare 3 interrupt (CC3IE). + * @rmtoll DIER CC3IE LL_TIM_DisableIT_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3IE); +} + +/** + * @brief Indicates whether the capture/compare 3 interrupt (CC3IE) is enabled. + * @rmtoll DIER CC3IE LL_TIM_IsEnabledIT_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3IE) == (TIM_DIER_CC3IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_EnableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Disable capture/compare 4 interrupt (CC4IE). + * @rmtoll DIER CC4IE LL_TIM_DisableIT_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4IE); +} + +/** + * @brief Indicates whether the capture/compare 4 interrupt (CC4IE) is enabled. + * @rmtoll DIER CC4IE LL_TIM_IsEnabledIT_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4IE) == (TIM_DIER_CC4IE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_EnableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Disable commutation interrupt (COMIE). + * @rmtoll DIER COMIE LL_TIM_DisableIT_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMIE); +} + +/** + * @brief Indicates whether the commutation interrupt (COMIE) is enabled. + * @rmtoll DIER COMIE LL_TIM_IsEnabledIT_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMIE) == (TIM_DIER_COMIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_EnableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Disable trigger interrupt (TIE). + * @rmtoll DIER TIE LL_TIM_DisableIT_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TIE); +} + +/** + * @brief Indicates whether the trigger interrupt (TIE) is enabled. + * @rmtoll DIER TIE LL_TIM_IsEnabledIT_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TIE) == (TIM_DIER_TIE)) ? 1UL : 0UL); +} + +/** + * @brief Enable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_EnableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableIT_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Disable break interrupt (BIE). + * @rmtoll DIER BIE LL_TIM_DisableIT_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableIT_BRK(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_BIE); +} + +/** + * @brief Indicates whether the break interrupt (BIE) is enabled. + * @rmtoll DIER BIE LL_TIM_IsEnabledIT_BRK + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledIT_BRK(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_BIE) == (TIM_DIER_BIE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_DMA_Management DMA Management + * @{ + */ +/** + * @brief Enable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_EnableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Disable update DMA request (UDE). + * @rmtoll DIER UDE LL_TIM_DisableDMAReq_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_UPDATE(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_UDE); +} + +/** + * @brief Indicates whether the update DMA request (UDE) is enabled. + * @rmtoll DIER UDE LL_TIM_IsEnabledDMAReq_UPDATE + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_UPDATE(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_UDE) == (TIM_DIER_UDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_EnableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Disable capture/compare 1 DMA request (CC1DE). + * @rmtoll DIER CC1DE LL_TIM_DisableDMAReq_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC1(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC1DE); +} + +/** + * @brief Indicates whether the capture/compare 1 DMA request (CC1DE) is enabled. + * @rmtoll DIER CC1DE LL_TIM_IsEnabledDMAReq_CC1 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC1(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC1DE) == (TIM_DIER_CC1DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_EnableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Disable capture/compare 2 DMA request (CC2DE). + * @rmtoll DIER CC2DE LL_TIM_DisableDMAReq_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC2(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC2DE); +} + +/** + * @brief Indicates whether the capture/compare 2 DMA request (CC2DE) is enabled. + * @rmtoll DIER CC2DE LL_TIM_IsEnabledDMAReq_CC2 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC2(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC2DE) == (TIM_DIER_CC2DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_EnableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Disable capture/compare 3 DMA request (CC3DE). + * @rmtoll DIER CC3DE LL_TIM_DisableDMAReq_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC3(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC3DE); +} + +/** + * @brief Indicates whether the capture/compare 3 DMA request (CC3DE) is enabled. + * @rmtoll DIER CC3DE LL_TIM_IsEnabledDMAReq_CC3 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC3(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC3DE) == (TIM_DIER_CC3DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_EnableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Disable capture/compare 4 DMA request (CC4DE). + * @rmtoll DIER CC4DE LL_TIM_DisableDMAReq_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_CC4(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_CC4DE); +} + +/** + * @brief Indicates whether the capture/compare 4 DMA request (CC4DE) is enabled. + * @rmtoll DIER CC4DE LL_TIM_IsEnabledDMAReq_CC4 + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_CC4(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_CC4DE) == (TIM_DIER_CC4DE)) ? 1UL : 0UL); +} + +/** + * @brief Enable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_EnableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Disable commutation DMA request (COMDE). + * @rmtoll DIER COMDE LL_TIM_DisableDMAReq_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_COM(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_COMDE); +} + +/** + * @brief Indicates whether the commutation DMA request (COMDE) is enabled. + * @rmtoll DIER COMDE LL_TIM_IsEnabledDMAReq_COM + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_COM(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_COMDE) == (TIM_DIER_COMDE)) ? 1UL : 0UL); +} + +/** + * @brief Enable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_EnableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_EnableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Disable trigger interrupt (TDE). + * @rmtoll DIER TDE LL_TIM_DisableDMAReq_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_DisableDMAReq_TRIG(TIM_TypeDef *TIMx) +{ + CLEAR_BIT(TIMx->DIER, TIM_DIER_TDE); +} + +/** + * @brief Indicates whether the trigger interrupt (TDE) is enabled. + * @rmtoll DIER TDE LL_TIM_IsEnabledDMAReq_TRIG + * @param TIMx Timer instance + * @retval State of bit (1 or 0). + */ +__STATIC_INLINE uint32_t LL_TIM_IsEnabledDMAReq_TRIG(const TIM_TypeDef *TIMx) +{ + return ((READ_BIT(TIMx->DIER, TIM_DIER_TDE) == (TIM_DIER_TDE)) ? 1UL : 0UL); +} + +/** + * @} + */ + +/** @defgroup TIM_LL_EF_EVENT_Management EVENT-Management + * @{ + */ +/** + * @brief Generate an update event. + * @rmtoll EGR UG LL_TIM_GenerateEvent_UPDATE + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_UPDATE(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_UG); +} + +/** + * @brief Generate Capture/Compare 1 event. + * @rmtoll EGR CC1G LL_TIM_GenerateEvent_CC1 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC1(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC1G); +} + +/** + * @brief Generate Capture/Compare 2 event. + * @rmtoll EGR CC2G LL_TIM_GenerateEvent_CC2 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC2(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC2G); +} + +/** + * @brief Generate Capture/Compare 3 event. + * @rmtoll EGR CC3G LL_TIM_GenerateEvent_CC3 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC3(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC3G); +} + +/** + * @brief Generate Capture/Compare 4 event. + * @rmtoll EGR CC4G LL_TIM_GenerateEvent_CC4 + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_CC4(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_CC4G); +} + +/** + * @brief Generate commutation event. + * @rmtoll EGR COMG LL_TIM_GenerateEvent_COM + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_COM(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_COMG); +} + +/** + * @brief Generate trigger event. + * @rmtoll EGR TG LL_TIM_GenerateEvent_TRIG + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_TRIG(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_TG); +} + +/** + * @brief Generate break event. + * @rmtoll EGR BG LL_TIM_GenerateEvent_BRK + * @param TIMx Timer instance + * @retval None + */ +__STATIC_INLINE void LL_TIM_GenerateEvent_BRK(TIM_TypeDef *TIMx) +{ + SET_BIT(TIMx->EGR, TIM_EGR_BG); +} + +/** + * @} + */ + +#if defined(USE_FULL_LL_DRIVER) +/** @defgroup TIM_LL_EF_Init Initialisation and deinitialisation functions + * @{ + */ + +ErrorStatus LL_TIM_DeInit(const TIM_TypeDef *TIMx); +void LL_TIM_StructInit(LL_TIM_InitTypeDef *TIM_InitStruct); +ErrorStatus LL_TIM_Init(TIM_TypeDef *TIMx, const LL_TIM_InitTypeDef *TIM_InitStruct); +void LL_TIM_OC_StructInit(LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +ErrorStatus LL_TIM_OC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_OC_InitTypeDef *TIM_OC_InitStruct); +void LL_TIM_IC_StructInit(LL_TIM_IC_InitTypeDef *TIM_ICInitStruct); +ErrorStatus LL_TIM_IC_Init(TIM_TypeDef *TIMx, uint32_t Channel, const LL_TIM_IC_InitTypeDef *TIM_IC_InitStruct); +void LL_TIM_ENCODER_StructInit(LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +ErrorStatus LL_TIM_ENCODER_Init(TIM_TypeDef *TIMx, const LL_TIM_ENCODER_InitTypeDef *TIM_EncoderInitStruct); +void LL_TIM_HALLSENSOR_StructInit(LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +ErrorStatus LL_TIM_HALLSENSOR_Init(TIM_TypeDef *TIMx, const LL_TIM_HALLSENSOR_InitTypeDef *TIM_HallSensorInitStruct); +void LL_TIM_BDTR_StructInit(LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +ErrorStatus LL_TIM_BDTR_Init(TIM_TypeDef *TIMx, const LL_TIM_BDTR_InitTypeDef *TIM_BDTRInitStruct); +/** + * @} + */ +#endif /* USE_FULL_LL_DRIVER */ + +/** + * @} + */ + +/** + * @} + */ + +#endif /* TIM1 || TIM2 || TIM3 || TIM4 || TIM5 || TIM6 || TIM7 || TIM8 || TIM9 || TIM10 || TIM11 || TIM12 || TIM13 || TIM14 */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __STM32F4xx_LL_TIM_H */ diff --git a/Inc/stm32f4xx_it.h b/Inc/stm32f4xx_it.h index 9dd4e938..be166e09 100644 --- a/Inc/stm32f4xx_it.h +++ b/Inc/stm32f4xx_it.h @@ -62,6 +62,7 @@ void USART2_IRQHandler(void); void USART3_IRQHandler(void); void UART4_IRQHandler(void); void UART5_IRQHandler(void); +void TIM6_DAC_IRQHandler(void); void TIM7_IRQHandler(void); void DMA2_Stream0_IRQHandler(void); void DMA2_Stream2_IRQHandler(void); diff --git a/Inc/tim.h b/Inc/tim.h new file mode 100644 index 00000000..7c1769f6 --- /dev/null +++ b/Inc/tim.h @@ -0,0 +1,52 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tim.h + * @brief This file contains all the function prototypes for + * the tim.c file + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Define to prevent recursive inclusion -------------------------------------*/ +#ifndef __TIM_H__ +#define __TIM_H__ + +#ifdef __cplusplus +extern "C" { +#endif + +/* Includes ------------------------------------------------------------------*/ +#include "main.h" + +/* USER CODE BEGIN Includes */ + +/* USER CODE END Includes */ + +extern TIM_HandleTypeDef htim6; + +/* USER CODE BEGIN Private defines */ + +/* USER CODE END Private defines */ + +void MX_TIM6_Init(void); + +/* USER CODE BEGIN Prototypes */ + +/* USER CODE END Prototypes */ + +#ifdef __cplusplus +} +#endif + +#endif /* __TIM_H__ */ + diff --git a/MDK-ARM/STM32F407-Demo.uvprojx b/MDK-ARM/STM32F407-Demo.uvprojx index f42ef840..712357b9 100644 --- a/MDK-ARM/STM32F407-Demo.uvprojx +++ b/MDK-ARM/STM32F407-Demo.uvprojx @@ -701,6 +701,66 @@ + + tim.c + 1 + ../Src/tim.c + + + 2 + 0 + 0 + 0 + 0 + 1 + 2 + 2 + 2 + 2 + 11 + 1 + + + + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 0 + 2 + 2 + 2 + 2 + 2 + 0 + 0 + 2 + 2 + 2 + 2 + 2 + + + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 2 + 1 + + + + usart.c 1 diff --git a/STM32F407-Demo.ioc b/STM32F407-Demo.ioc index 40d02f54..34a59a7c 100644 --- a/STM32F407-Demo.ioc +++ b/STM32F407-Demo.ioc @@ -121,11 +121,12 @@ Mcu.CPN=STM32F407ZGT6 Mcu.Family=STM32F4 Mcu.IP0=ADC1 Mcu.IP1=DMA -Mcu.IP10=UART4 -Mcu.IP11=UART5 -Mcu.IP12=USART1 -Mcu.IP13=USART2 -Mcu.IP14=USART3 +Mcu.IP10=TIM6 +Mcu.IP11=UART4 +Mcu.IP12=UART5 +Mcu.IP13=USART1 +Mcu.IP14=USART2 +Mcu.IP15=USART3 Mcu.IP2=FREERTOS Mcu.IP3=I2C1 Mcu.IP4=IWDG @@ -134,7 +135,7 @@ Mcu.IP6=RCC Mcu.IP7=SPI1 Mcu.IP8=SPI2 Mcu.IP9=SYS -Mcu.IPNb=15 +Mcu.IPNb=16 Mcu.Name=STM32F407Z(E-G)Tx Mcu.Package=LQFP144 Mcu.Pin0=PE5 @@ -203,10 +204,11 @@ Mcu.Pin65=PE1 Mcu.Pin66=VP_FREERTOS_VS_CMSIS_V2 Mcu.Pin67=VP_IWDG_VS_IWDG Mcu.Pin68=VP_SYS_VS_tim7 +Mcu.Pin69=VP_TIM6_VS_ClockSourceINT Mcu.Pin7=PA4 Mcu.Pin8=PA5 Mcu.Pin9=PA6 -Mcu.PinsNb=69 +Mcu.PinsNb=70 Mcu.ThirdPartyNb=0 Mcu.UserConstants= Mcu.UserName=STM32F407ZGTx @@ -234,6 +236,7 @@ NVIC.SavedPendsvIrqHandlerGenerated=true NVIC.SavedSvcallIrqHandlerGenerated=true NVIC.SavedSystickIrqHandlerGenerated=true NVIC.SysTick_IRQn=true\:15\:0\:false\:false\:false\:true\:false\:true\:false +NVIC.TIM6_DAC_IRQn=true\:6\:0\:true\:false\:true\:true\:true\:true\:true NVIC.TIM7_IRQn=true\:15\:0\:true\:false\:true\:false\:false\:true\:true NVIC.TimeBase=TIM7_IRQn NVIC.TimeBaseIP=TIM7 @@ -667,6 +670,10 @@ SPI2.Direction=SPI_DIRECTION_2LINES SPI2.IPParameters=VirtualType,Mode,Direction,CalculateBaudRate,BaudRatePrescaler SPI2.Mode=SPI_MODE_MASTER SPI2.VirtualType=VM_MASTER +TIM6.AutoReloadPreload=TIM_AUTORELOAD_PRELOAD_ENABLE +TIM6.IPParameters=Prescaler,Period,AutoReloadPreload +TIM6.Period=999 +TIM6.Prescaler=83 UART4.IPParameters=VirtualMode UART4.VirtualMode=Asynchronous UART5.IPParameters=VirtualMode @@ -683,5 +690,7 @@ VP_IWDG_VS_IWDG.Mode=IWDG_Activate VP_IWDG_VS_IWDG.Signal=IWDG_VS_IWDG VP_SYS_VS_tim7.Mode=TIM7 VP_SYS_VS_tim7.Signal=SYS_VS_tim7 +VP_TIM6_VS_ClockSourceINT.Mode=Enable_Timer +VP_TIM6_VS_ClockSourceINT.Signal=TIM6_VS_ClockSourceINT board=custom rtos.0.ip=FREERTOS diff --git a/Src/iwdg.c b/Src/iwdg.c index b139d102..0576ebdb 100644 --- a/Src/iwdg.c +++ b/Src/iwdg.c @@ -78,3 +78,4 @@ void MX_IWDG_Init(void) /* USER CODE BEGIN 1 */ /* USER CODE END 1 */ + diff --git a/Src/main.c b/Src/main.c index 7b82386d..3881ad93 100644 --- a/Src/main.c +++ b/Src/main.c @@ -24,6 +24,7 @@ #include "i2c.h" #include "iwdg.h" #include "spi.h" +#include "tim.h" #include "usart.h" #include "gpio.h" @@ -131,6 +132,7 @@ int main(void) MX_USART3_UART_Init(); MX_IWDG_Init(); MX_ADC1_Init(); + MX_TIM6_Init(); /* USER CODE BEGIN 2 */ HAL_Delay(100); @@ -243,6 +245,15 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) { task_wd_tick_probe(); } + + /* 1 kHz 采样节拍：TIM6 更新中断内脉冲 CONVST（仅两次 GPIO 写，亚 µs）。 + * TIM6 与 BUSY EXTI(EXTI9_5_IRQn) 同为抢占优先级 6 → 互不抢占， + * 读 RD 时序不会被下一次 CONVST 脉冲打断。详见 + * docs/子系统设计/ADC采样节拍设计说明.md。放 USER CODE 区（L2）。 */ + if (htim->Instance == TIM6) + { + tpafe5160_start_conv_irq(); + } /* USER CODE END Callback 1 */ } diff --git a/Src/stm32f4xx_it.c b/Src/stm32f4xx_it.c index 7814b2b1..bb0d0ac4 100644 --- a/Src/stm32f4xx_it.c +++ b/Src/stm32f4xx_it.c @@ -244,6 +244,7 @@ extern DMA_HandleTypeDef hdma_spi2_rx; extern DMA_HandleTypeDef hdma_spi2_tx; extern SPI_HandleTypeDef hspi1; extern SPI_HandleTypeDef hspi2; +extern TIM_HandleTypeDef htim6; extern DMA_HandleTypeDef hdma_usart1_tx; extern DMA_HandleTypeDef hdma_usart1_rx; extern UART_HandleTypeDef huart4; @@ -335,32 +336,6 @@ void UsageFault_Handler(void) } } -/* USER CODE BEGIN 1 */ - -/* 使能 MemManage / BusFault / UsageFault 三个异常。 - * - * 为什么必须做：复位后 SCB->SHCSR 只开了 HardFault，后三者处于**禁用**状态—— - * 它们触发时会被升级成 HardFault，`hard_fault_report` 打出来的是 "HARDFAULT" - * 且看不出根因。这里逐个置使能位，日志里才能直接看到 MEMFAULT / BUSFAULT / - * USAGEFAULT 字样。 - * - * ⚠ 刻意**不**打开以下两项（都会把普通 bug 升级成死机，对本项目弊大于利）： - * - CCR.UNALIGN_TRP ：非对齐访问陷入。Cortex-M4 硬件本可处理非对齐访问， - * 打开后协议解析里常见的非对齐取字段会直接死机。 - * - CCR.DIV_0_TRP ：除零陷入。除零应由业务代码自己判，不要靠硬件兜。 - * 打开它们只会让"本该只是算错个值"变成"整机复位"。 - * - * 调用时机：app_main_init() 早期（日志可用前即可，越早越好）。 - */ -void fault_handler_enable(void) -{ - SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk | - SCB_SHCSR_BUSFAULTENA_Msk | - SCB_SHCSR_USGFAULTENA_Msk; -} - -/* USER CODE END 1 */ - /** * @brief This function handles Debug monitor. */ @@ -521,6 +496,20 @@ void UART5_IRQHandler(void) /* USER CODE END UART5_IRQn 1 */ } +/** + * @brief This function handles TIM6 global interrupt, DAC1 and DAC2 underrun error interrupts. + */ +void TIM6_DAC_IRQHandler(void) +{ + /* USER CODE BEGIN TIM6_DAC_IRQn 0 */ + + /* USER CODE END TIM6_DAC_IRQn 0 */ + HAL_TIM_IRQHandler(&htim6); + /* USER CODE BEGIN TIM6_DAC_IRQn 1 */ + + /* USER CODE END TIM6_DAC_IRQn 1 */ +} + /** * @brief This function handles TIM7 global interrupt. */ @@ -593,4 +582,26 @@ void DMA2_Stream7_IRQHandler(void) /* USER CODE BEGIN 1 */ +/* 使能 MemManage / BusFault / UsageFault 三个异常。 + * + * 为什么必须做：复位后 SCB->SHCSR 只开了 HardFault，后三者处于**禁用**状态—— + * 它们触发时会被升级成 HardFault，`hard_fault_report` 打出来的是 "HARDFAULT" + * 且看不出根因。这里逐个置使能位，日志里才能直接看到 MEMFAULT / BUSFAULT / + * USAGEFAULT 字样。 + * + * ⚠ 刻意**不**打开以下两项（都会把普通 bug 升级成死机，对本项目弊大于利）： + * - CCR.UNALIGN_TRP ：非对齐访问陷入。Cortex-M4 硬件本可处理非对齐访问， + * 打开后协议解析里常见的非对齐取字段会直接死机。 + * - CCR.DIV_0_TRP ：除零陷入。除零应由业务代码自己判，不要靠硬件兜。 + * 打开它们只会让"本该只是算错个值"变成"整机复位"。 + * + * 调用时机：app_main_init() 早期（日志可用前即可，越早越好）。 + */ +void fault_handler_enable(void) +{ + SCB->SHCSR |= SCB_SHCSR_MEMFAULTENA_Msk | + SCB_SHCSR_BUSFAULTENA_Msk | + SCB_SHCSR_USGFAULTENA_Msk; +} + /* USER CODE END 1 */ diff --git a/Src/tim.c b/Src/tim.c new file mode 100644 index 00000000..aa07ef25 --- /dev/null +++ b/Src/tim.c @@ -0,0 +1,105 @@ +/* USER CODE BEGIN Header */ +/** + ****************************************************************************** + * @file tim.c + * @brief This file provides code for the configuration + * of the TIM instances. + ****************************************************************************** + * @attention + * + * Copyright (c) 2026 STMicroelectronics. + * All rights reserved. + * + * This software is licensed under terms that can be found in the LICENSE file + * in the root directory of this software component. + * If no LICENSE file comes with this software, it is provided AS-IS. + * + ****************************************************************************** + */ +/* USER CODE END Header */ +/* Includes ------------------------------------------------------------------*/ +#include "tim.h" + +/* USER CODE BEGIN 0 */ + +/* USER CODE END 0 */ + +TIM_HandleTypeDef htim6; + +/* TIM6 init function */ +void MX_TIM6_Init(void) +{ + + /* USER CODE BEGIN TIM6_Init 0 */ + + /* USER CODE END TIM6_Init 0 */ + + TIM_MasterConfigTypeDef sMasterConfig = {0}; + + /* USER CODE BEGIN TIM6_Init 1 */ + + /* USER CODE END TIM6_Init 1 */ + htim6.Instance = TIM6; + htim6.Init.Prescaler = 83; + htim6.Init.CounterMode = TIM_COUNTERMODE_UP; + htim6.Init.Period = 999; + htim6.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_ENABLE; + if (HAL_TIM_Base_Init(&htim6) != HAL_OK) + { + Error_Handler(); + } + sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET; + sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE; + if (HAL_TIMEx_MasterConfigSynchronization(&htim6, &sMasterConfig) != HAL_OK) + { + Error_Handler(); + } + /* USER CODE BEGIN TIM6_Init 2 */ + + /* USER CODE END TIM6_Init 2 */ + +} + +void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* tim_baseHandle) +{ + + if(tim_baseHandle->Instance==TIM6) + { + /* USER CODE BEGIN TIM6_MspInit 0 */ + + /* USER CODE END TIM6_MspInit 0 */ + /* TIM6 clock enable */ + __HAL_RCC_TIM6_CLK_ENABLE(); + + /* TIM6 interrupt Init */ + HAL_NVIC_SetPriority(TIM6_DAC_IRQn, 6, 0); + HAL_NVIC_EnableIRQ(TIM6_DAC_IRQn); + /* USER CODE BEGIN TIM6_MspInit 1 */ + + /* USER CODE END TIM6_MspInit 1 */ + } +} + +void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* tim_baseHandle) +{ + + if(tim_baseHandle->Instance==TIM6) + { + /* USER CODE BEGIN TIM6_MspDeInit 0 */ + + /* USER CODE END TIM6_MspDeInit 0 */ + /* Peripheral clock disable */ + __HAL_RCC_TIM6_CLK_DISABLE(); + + /* TIM6 interrupt Deinit */ + HAL_NVIC_DisableIRQ(TIM6_DAC_IRQn); + /* USER CODE BEGIN TIM6_MspDeInit 1 */ + + /* USER CODE END TIM6_MspDeInit 1 */ + } +} + +/* USER CODE BEGIN 1 */ + +/* USER CODE END 1 */ + diff --git a/docs/内存管理/RAM使用分析与优化方案.md b/docs/内存管理/RAM使用分析与优化方案.md index c37a6ce1..d6d876fd 100644 --- a/docs/内存管理/RAM使用分析与优化方案.md +++ b/docs/内存管理/RAM使用分析与优化方案.md @@ -36,10 +36,10 @@ | 区域 | 用量 | 容量 | 占比 | |---|---|---|---| -| ER_IROM1 | 268,332 B (262.04 KB) | 1,048,576 B (1024 KB) | 25.6% | -| RW_IRAM1 | 89,200 B (87.11 KB) | 131,072 B (128 KB) | 68.1% | +| ER_IROM1 | 268,644 B (262.35 KB) | 1,048,576 B (1024 KB) | 25.6% | +| RW_IRAM1 | 89,272 B (87.18 KB) | 131,072 B (128 KB) | 68.1% | | RW_CCM | 49,184 B (48.03 KB) | 65,280 B (64 KB) | 75.3% | -| **Flash (ROM 合计)** | **269,092 B (262.8 KB)** | 1,048,576 B (1024 KB) | **25.7%** | +| **Flash (ROM 合计)** | **269,404 B (263.1 KB)** | 1,048,576 B (1024 KB) | **25.7%** | 各区的容量与常量来源： diff --git a/docs/子系统设计/ADC采样节拍设计说明.md b/docs/子系统设计/ADC采样节拍设计说明.md index 61bd25d8..1eeafd38 100644 --- a/docs/子系统设计/ADC采样节拍设计说明.md +++ b/docs/子系统设计/ADC采样节拍设计说明.md @@ -1,7 +1,7 @@ # ADC 采样节拍设计说明（1 kHz 硬件定时器触发） -> **状态**：**规划中（未实现）**——B1 遗留项。本文件给出 **CubeMX 配置规格**与**代码改造清单**， -> 供实施时按序执行；实现并台架验收后按 §7 判定，并把本行状态改为"已实现"。 +> **状态**：**已实现（2026-10-10）**——TIM6 更新中断（1 kHz）触发已落地（`Src/main.c` 回调 + +> `app_main.c` 启动 + `adc_task.c` 退化为纯消费者），`@build` 0 错 0 警；**台架 `@test` 验收（§7）待做**。 > **上位需求**：`docs/算法/继电保护功能复现规划.md` §3.2 L1-1（周期 CONVST 重触发 1000 Hz， > 与保护节拍同源）。**驱动契约**：`Drivers/BSP/TPAFE5160/README.md`。 > **背景**：B1（2026-10-10）已把 `adc_task` 由空桩改为真实消费者，但采样节拍是 @@ -12,7 +12,7 @@ ## 1. 目标与现状 -| 项 | 现状（B1 软触发） | 目标（硬件定时器） | +| 项 | 改造前（B1 软触发） | 改造后（TIM6 硬件定时器，2026-10-10 已落地） | |---|---|---| | CONVST 边沿时刻 | 任务被调度时刻（抖动 = 调度延迟，可达数十 µs~ms） | TIM 更新事件 + ISR 入口延迟（亚 µs~数 µs） | | 周期精度 | 依赖 FreeRTOS tick（TIM7） | 定时器硬件分频，**晶振级** | @@ -121,12 +121,12 @@ void HAL_TIM_PeriodElapsedCallback(TIM_HandleTypeDef *htim) - 更新文件头与函数注释（说明节拍由 TIM6 提供，本任务不再触发）。 - **看门狗不变**：`TASK_WD_ADC` 心跳仍在循环内每拍调用。 -### 4.5 文档同步 +### 4.5 文档同步（2026-10-10 已执行） -- `docs/算法/继电保护功能复现规划.md` §3.2 L1-1：把"🔶 软触发；硬件定时器为后续"改为 ✅。 -- `docs/待处理内容.md` §2.1：本项（B4）销项。 -- `AGENTS.md` 架构要点 `adcTask` 条：删"本阶段为任务周期软触发"的注。 -- `Drivers/BSP/TPAFE5160/README.md`：补一句"运行期周期触发由 TIM6 更新中断提供"。 +- `docs/算法/继电保护功能复现规划.md`：§3.2 L1-1 由 🔶 改为 ✅（TIM6 硬件触发）、§1.2 采样软件行 + 变更记录同步。 +- `docs/待处理内容.md` §4：TPAFE 自动扫描模式待确认项标注"已不影响"（TIM6 方案不依赖它）。 +- `AGENTS.md` 架构要点 `adcTask` 条 + `app_main_init` 序列：改为"TIM6 硬件触发 + 纯消费者"。 +- `Drivers/BSP/TPAFE5160/README.md`：周期重触发改为"由 TIM6 更新中断提供"。 --- @@ -200,3 +200,4 @@ t=1000 µs 下一个 TIM6 更新事件 | 日期 | 变更 | 说明 | |---|---|---| | 2026-10-10 | 建立本文档 | B1（ADC 采集链路）遗留项"精确 1 kHz 硬件定时器触发"的规划：方案选型（A/B）、CubeMX 配置规格、代码改造清单、时序与优先级分析、风险与验收判据、等周波调频预留 | +| 2026-10-10 | **实现（方案 A）** | CubeMX 加 TIM6（PSC=83 / ARR=999 / ARR 预装载 / NVIC 抢占优先级 6）；`Src/main.c` 回调加 TIM6 分支触发 CONVST；`app_main.c` 用 `HAL_TIM_Base_Start_IT(&htim6)` 启动节拍；`adc_task.c` 退化为纯消费者。`@build` 0 错 0 警；台架 `@test` 验收待做 | diff --git a/docs/待处理内容.md b/docs/待处理内容.md index 9cbb6f6b..bfdbda82 100644 --- a/docs/待处理内容.md +++ b/docs/待处理内容.md @@ -244,7 +244,7 @@ S14 已在 workflow 显式提示"体积门禁未执行"（`::notice::`）并在 ## 4. 待确认（需手册/硬件/产品定义，暂不直接改码） -1. TPAFE5160 是否有自动扫描模式（仅影响后续"硬件定时器 1 kHz 触发"方案选型；B1 已用周期 CONVST 软触发闭环，不再影响缺陷定级）。 +1. TPAFE5160 是否有自动扫描模式（**已不影响**：1 kHz 硬件定时器触发已于 2026-10-10 由 **TIM6 更新中断**方案落地，不依赖自动扫描，见 `docs/子系统设计/ADC采样节拍设计说明.md`）。 2. `APP_ADC_ENABLE` / `APP_RS485_ENABLE` 是否应在产品构建真实门控模块（当前宏已如实标注为"未接线占位"，此处确认的是**是否接入真实门控**；B1 取数不依赖该宏）。 3. RS-485 PD0 DE 的半双工方向语义需硬件实测确认（本次仅静态审查）。 diff --git a/docs/算法/继电保护功能复现规划.md b/docs/算法/继电保护功能复现规划.md index 77672263..570a4ad0 100644 --- a/docs/算法/继电保护功能复现规划.md +++ b/docs/算法/继电保护功能复现规划.md @@ -37,7 +37,7 @@ | 操作系统 | FreeRTOS V10.3.1（CMSIS-RTOS v2） | | 已实现子系统 | 网络（CH395F）、存储（GD5F2GQ5UE SPI NAND + dhara FTL + FatFs）、时间（SD2506 RTC + `sys_clock`）、配置（cfg_file）、日志、UI（远端显示）、看门狗（IWDG）、FTP | | 采样硬件 | TPAFE5160（16 位、8 通道**同步**、±5 V 双极性、并行 `GPIOG[15:0]`）+ STM32 内部 ADC1（12 位、9 通道**顺序**扫描、0~3.3 V 单极性） | -| 采样软件 | `Drivers/BSP/TPAFE5160/tpafe5160.h` 驱动就绪（原子快照 API）；`App/task/adc_task.c` **已实现真实消费者（B1，2026-10-10）**——每 1 ms 触发 CONVST + `tpafe5160_snapshot()` 取数 + 帧统计；STM32 侧仍无 `HAL_ADC_Start` | +| 采样软件 | `Drivers/BSP/TPAFE5160/tpafe5160.h` 驱动就绪（原子快照 API）；`App/task/adc_task.c` **已实现真实消费者（B1，2026-10-10）**——`tpafe5160_snapshot()` 取数 + 帧统计；**采样节拍由 TIM6 更新中断（1 kHz）硬件触发**（2026-10-10）；STM32 侧仍无 `HAL_ADC_Start` | | 保护算法层 | **完全缺失**（无傅氏、无保护元件、无出口、无定值模型） | | 已知硬件缺陷 | **N-18**：8 路电气量分属两片转换器 → V0.1 上禁止跨转换器做相位/功率/矢量运算 | @@ -238,7 +238,7 @@ | # | 功能点 | 关键参数 | 完成判据 | 状态 | | --- | --- | --- | --- | --- | -| L1-1 | 周期 CONVST 重触发 | 1000 Hz（与保护节拍同源） | 示波器见 U3 `BUSY` 连续脉冲；`tpafe5160_frame_seq()` 持续递增 | 🔶 B1 已软触发（`osDelayUntil`）并台架确认 `frame_seq` 严格 1000 Hz 递增；硬件定时器 1 kHz 为后续 | +| L1-1 | 周期 CONVST 重触发 | 1000 Hz（与保护节拍同源） | 示波器见 U3 `BUSY` 连续脉冲；`tpafe5160_frame_seq()` 持续递增 | ✅ 2026-10-10：**TIM6 更新中断（1 kHz）硬件触发**（ISR 内 `tpafe5160_start_conv_irq()`；方案 A，零引脚/零驱动改动）；B1 阶段已台架确认 `frame_seq` 严格 1000 Hz 递增 | | L1-2 | TPAFE 快照消费 | 8 通道 / 帧 | `adc_task` 每拍调 `tpafe5160_snapshot()`，返回 1/0/-1 有处理 | ✅ B1 已实现并 `@test` 闭环（`adc_task.c`；台架 `idle=0`、`frst_err=0`） | | L1-3 | STM32 ADC1 启动与扫描 | 9 通道、144 cycles、软件触发 | 全库出现 `HAL_ADC_Start`；9 通道码值随注入变化 | ⬜ | | L1-4 | 通道语义映射 | 见 `docs/硬件平台/ADC通道映射说明.md`（**按语义取数，不写死下标**） | `UA→buf[6]`、`UN→buf[5]`、`IA→buf[2]`；STM32 侧 `UB→ADC_CHANNEL_14` | ⬜ | @@ -593,3 +593,4 @@ B0 产品定义 ✅（2026-10-10 已确认，见 §1.5） | 2026-10-10 | B0 残留项闭环 + 新增 §1.6 范围评估 | B0-a **本期不做**（`UBA`/`V1`/`V2` 无硬件通道）、B0-b **保留 TCP 8888**（SNTP 5105 不做）；B0-c **定为"骨架全做 + 有效通道子集闭环"**；新增 **§1.6** 由 V0.1 硬件（N-18 + 无中点偏置）推导本期可做保护范围 = TPAFE 三路（`UA`/`UN`/`IA`）有效子集；同步 §1.3、§3.3、§6.4（零序口径更正）、§7.1/§7.2、§9 R1 | | 2026-10-10 | 恢复被外部工具回写的旧稿 | 文件曾被外部格式化工具回写为旧稿：**§1.5/§1.6/§5 丢失、§10 混入 66 组下划线（u）标签、表格被填充对齐**。本次按权威来源重建 §1.5/§1.6、补齐 **§5 定值参数模型**，清除全部下划线标签并把表格压回仓库紧凑风格；内容与 §1.3/§3.3/§6.4/§7/§9 的定稿一致 | | 2026-10-10 | **B1 落地：ADC 采集链路实现** | `App/task/adc_task.c` 由空桩转为真实消费者——每 1 ms 触发 `tpafe5160_start_conv_irq()` + `tpafe5160_snapshot()` 原子取数 + 帧统计 + 每 10 s 心跳日志；`Src/freertos.c` 手工创建 `adcTask`（512 words / Normal，落 `USER CODE` 保护区）+ 纳入 IWDG 必需掩码（`TASK_WD_ADC`，`0x37`→`0x77`）。§1.4 采样软件行、§1.4 依赖表 B1 行、§3.2 任务表（L1-1/L1-2）、§4 栈预算行、§7.1 P0 行同步更新。⚠ 本阶段为**任务周期软触发**（`osDelayUntil`）；硬件定时器 1 kHz 触发为后续。同日 `@test` 实机闭环 PASS（`frame_seq` 严格 1000 Hz 递增、`idle=0`、`frst_err=0`、栈峰值 496/2048） | +| 2026-10-10 | **1 kHz 硬件定时器触发（TIM6）** | 采样节拍由任务周期软触发改为 **TIM6 更新中断（1 kHz）**：`Src/main.c` 的 `HAL_TIM_PeriodElapsedCallback` 加 TIM6 分支触发 `tpafe5160_start_conv_irq()`（`USER CODE` 区）；`app_main.c` 用 `HAL_TIM_Base_Start_IT(&htim6)` 替换单次触发（在 `tpafe5160_init()` 之后）；`adc_task.c` 退化为**纯消费者**（1 ms 轮询仅作消费节奏）。§1.2 采样软件行、§3.2 L1-1 同步。详见 `docs/子系统设计/ADC采样节拍设计说明.md` |