wandering1/STM32F4-Base
1
0
Fork 0
Code Issues 30 Pull Requests Actions Packages Projects 2 Releases Wiki Activity

feat(bsp): V2 CPU 板引脚调整（LED1 PC4->PC5, LED2 PC5->PB0）

Browse Source 
- LED1: PC4 -> PC5，Pull PULLUP->NOPULL，Speed HIGH->LOW
- LED2: PC5 -> PB0（新增输出），同上
- CH395F SPI2 仅标签口径互换：PB14=CH395F_SDI、PB15=CH395F_SDO；
  电气 AF 映射未变（PB14=SPI2_MISO 上拉，PB15=SPI2_MOSI）；删除宏 CH395F_SDOB15_Pin（已确认全工程无引用）
- 来源：CubeMX 6.18.1 依 CPU-V0.2 原理图调整并重新生成
- 本提交是可搬运的“引脚补丁”，后续 cherry-pick 到 ui-research 基座
This commit is contained in:
Wanderingss
2026-09-18 19:26:51 +08:00
parent acd29d76d9
commit deb4385a06
4 changed files with 44 additions and 39 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Src/gpio.c
+18 -10
View File
@@ -55,10 +55,11 @@ void MX_GPIO_Init(void)
__HAL_RCC_GPIOD_CLK_ENABLE();
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOC, LED1_Pin|LED2_Pin, GPIO_PIN_SET);
HAL_GPIO_WritePin(LED1_GPIO_Port, LED1_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOB, LED3_Pin|LED4_Pin|CH395_SCS_Pin|GD_WP_Pin, GPIO_PIN_SET);
HAL_GPIO_WritePin(GPIOB, LED2_Pin|LED3_Pin|LED4_Pin|CH395_SCS_Pin
|GD_WP_Pin, GPIO_PIN_SET);
/*Configure GPIO pin Output Level */
HAL_GPIO_WritePin(GPIOF, LED5_Pin|LED6_Pin, GPIO_PIN_SET);
@@ -81,19 +82,26 @@ void MX_GPIO_Init(void)
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(CH395_INT_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : LED1_Pin LED2_Pin */
GPIO_InitStruct.Pin = LED1_Pin|LED2_Pin;
/*Configure GPIO pin : LED1_Pin */
GPIO_InitStruct.Pin = LED1_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(LED1_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : LED3_Pin LED4_Pin */
GPIO_InitStruct.Pin = LED3_Pin|LED4_Pin;
/*Configure GPIO pins : LED2_Pin LED3_Pin */
GPIO_InitStruct.Pin = LED2_Pin|LED3_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/*Configure GPIO pin : LED4_Pin */
GPIO_InitStruct.Pin = LED4_Pin;
GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
GPIO_InitStruct.Pull = GPIO_PULLUP;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
HAL_GPIO_Init(LED4_GPIO_Port, &GPIO_InitStruct);
/*Configure GPIO pins : LED5_Pin LED6_Pin */
GPIO_InitStruct.Pin = LED5_Pin|LED6_Pin;