refactor(docs): point entry-file references at their new homes
AGENTS.md stopped being the store of record for build steps, Python env, hardware pins, doc conventions, log cost and task ownership. Those facts already live in docs, skills and role files; the entry file now only points at them. This commit moves every reference that used to name the entry file to the authoritative landing point, so a reader who follows a link arrives at the fact instead of at a sentence that no longer exists. What changed is links and prose, not behaviour. Code, scripts and tests only have comment and docstring lines touched; the only non-comment edit in the whole changeset is one note string inside the generated pin table JSON, and its generator was changed in the same step so the two stay byte-identical. New landing points created before the references were retargeted: - The console single-writer log design doc, section 7.1, is now the single authority for log cost: about 90 B flash and 216 B stack per DBG_ line, and the rule that deep call chains must predefine DBG_LINE_BUF_MAX. It also carries the full list of the twelve translation units that have tightened it, plus the grep command that decides the truth if the list and the code ever disagree. - The document writing standard, section 2, now holds the BOM list. - keil-build skill gains an exit code table: 0 success, 1 build failure, 2 BuildEnvError, 3 usage, 4 build lock held. This corrects a belief that was never actually written down anywhere: exit 2 does not simply mean environment error, argparse also exits 2 and the wrapper script was remapped so the two no longer collide. Regenerated and checked byte for byte: - The end-to-end architecture SVG in docs/images from its generator. - tools/netlist_semantics/pinout_kb.json from gen_kb.py. Both are idempotent; running the generators again produces no diff. Deliberately not touched, because machines read them: - scripts/check_bom_drift.py joins every line containing BOM and asserts four paths are present, so the entry file BOM line must stay one line. - scripts/gen_task_table.py reads the TASK_TABLE anchors directly. - scripts/rename_maps and scripts/archive keep their historical wording; they describe what happened, not what is true now. Verified: doc links report the same six pre-existing findings as the base commit and no new ones, generated-fresh passes, bom drift is clean across 101 files, and AGENTS.md itself is unchanged in this commit.
This commit is contained in:
+1
-1
@@ -14,7 +14,7 @@
|
||||
| `rs485_task.c/h` | (RS-485 任务) | — | 半双工 RS-485 协议通信 |
|
||||
| `../sync/time_sync.c` | timeSyncTask | Normal | 墙钟时间同步(实现不在本目录,见 [`../sync/README.md`](../sync/README.md)) |
|
||||
|
||||
> 上表栈大小/优先级以 `Src/freertos.c` 为准(`README.md`/`AGENTS.md` 的任务表由
|
||||
> 上表栈大小/优先级以 `Src/freertos.c` 为准(`README.md` 的任务表由
|
||||
> `scripts/gen_task_table.py` 生成,勿手抄)。
|
||||
|
||||
## 就绪屏障(重要)
|
||||
|
||||
+3
-2
@@ -5,7 +5,7 @@
|
||||
* (App/algo/sample_ring.c)→ 全周傅氏相量重算(App/algo/phasor.c)
|
||||
* + 帧统计(节拍由 TIM3 硬件定时器提供)
|
||||
* 状态说明:**B1 已落地(2026-10-10)**——本任务从空桩转为真实消费者:
|
||||
* 用 tpafe5160_snapshot() 原子取数(AGENTS 铁律),统计帧数/无新帧次数,
|
||||
* 用 tpafe5160_snapshot() 原子取数(唯一许可取数面),统计帧数/无新帧次数,
|
||||
* 并纳入看门狗 required_mask(TASK_WD_ADC)。
|
||||
* **采样节拍**:由 **TIM3 更新中断(1 kHz)** 硬件触发——
|
||||
* ISR 内调 tpafe5160_start_conv_irq()(Src/main.c 的
|
||||
@@ -22,7 +22,8 @@
|
||||
* V0.1 上只有 TPAFE 三路(UA/UN/IA)测量有效;本任务只取数,不做保护运算。
|
||||
* 接入前必读:取数只用 adc_input_raw() / tpafe5160_snapshot()(临界区原子快照,
|
||||
* 仅任务上下文;旧的 get_buf/data_ready/clear_ready 已删除);接消费者前的
|
||||
* 强制门禁见根 AGENTS.md「接 ADC / RS-485 消费者前的强制门禁」+ 建任务前后
|
||||
* 强制门禁见 docs/算法/继电保护功能复现规划.md 的取数契约,RS-485 侧
|
||||
* → docs/产品需求/产品需求设计文档.md §5.10「重启门禁」;建任务前后
|
||||
* 各跑 scripts/stack_report.py 做栈预算。
|
||||
* 适用平台:STM32F407ZGTx + TPAFE5160
|
||||
* 作者:王建锋
|
||||
|
||||
+2
-1
@@ -24,7 +24,8 @@ void adc_task_func(void *arg);
|
||||
/* 事件驱动消费的唤醒标志。
|
||||
* TIM3 1 kHz 更新中断触发 CONVST 后,用本标志唤醒 adcTask 消费一拍。
|
||||
* 线程标志在此是**命令位**(等待即消费),不是状态位 → 用 osFlagsWaitAny,
|
||||
* 不加 osFlagsNoClear(AGENTS「就绪屏障位必须 osFlagsNoClear」只约束状态位) */
|
||||
* 不加 osFlagsNoClear(「就绪位必须 osFlagsNoClear」只约束状态位,见
|
||||
* docs/架构设计/项目启动顺序管理.md §2) */
|
||||
#define ADC_WAKE_FLAG 0x0001U
|
||||
|
||||
/* ISR 入口:由 Src/main.c 的 HAL_TIM_PeriodElapsedCallback(TIM3 分支)调用。
|
||||
|
||||
@@ -5,7 +5,7 @@
|
||||
*(保护功能清单见 docs/算法/继电保护功能复现规划.md)
|
||||
* 故障闭锁(`adc_health_flags()` 电平位 → 元件状态复位 + 本拍不判据)。
|
||||
* 判据本体在 `App/algo/prot_elm.c`(纯逻辑,主机侧纯逻辑单测已覆盖),本文件
|
||||
* 只做消费/编排(AGENTS 目录地图:task 不装算法)。
|
||||
* 只做消费/编排(目录归属:算法进 App/algo/,task 不装算法)。
|
||||
* 线程约定:仅本任务调 prot_elm_run / prot_set_selfcheck(prot_elm.h 线程约定);
|
||||
* prot_set 写在 P4 前无第二写者(104 定值写经 pts→prot_set,见注)。
|
||||
* 创建日期:2026-10-12(B5)
|
||||
|
||||
Reference in New Issue
Block a user