fix(编号): 批 6 追溯器分档 + 板级 NET 用例号标注归一
步骤 1：追溯器分两档（不改数据，改判据） - BENCH：文档**定义行**（标题行或表格首格）带「（硬件层）」或其所属章节带的号 → 人工台架用例，不期望有 C 代码载体；NOTIMPL：定义行标了未实现/待补/暂缓/已取消 - 两档**单列示数恒打印**、明细进 --verbose，不是静默豁免；也不等于"已验证" - 两个实测坑写在脚本注释里：① 按"任意行出现即算"实现时 BENCH 收 14 个号却只消掉 1 处差异（同一号被别处引用一次就复活）→ 改为只认定义行 + 从文档全集整体减档； ② 载体类型必须由定义处决定，引用行不影响判断 - 另把 has_intent() 收窄到同号所在行（原先整文件任意位置有人话就算过关） 步骤 2：板级 NET 用例标注归一（真债，改名 109 处 / 5 文件） - 取证发现"文档声明却无载体"绝大多数是**标注形态烂**：实现体里写的是 TC204 / TC-201 / TC 703 / TC1501 / TC1502b（三种畸形），文档写 TC-NET-204 等 - 序号一位不改、只补模块码（§7.1）；作用域限定 5 个真载体文件： test/board/ch395f_test_task.c(67) net_test_task.c(37) net_test_task.h(1) test/host/ch395f_socket_test.py(3) Drivers/BSP/CH395F/ch395f.c(1) - 审计轨迹 scripts/rename_maps/batch6-net-annotate.json；别名自动登记（scoped） 实测 - DOC-ONLY 29 → 15：701~704 的 NET 层实现体一直存在（net_test_task.c）， 此前因裸形标注被误判成"未实现"；1501~1503 属硬件层人工 + 同样裸形 - 交集 260 不变、代码侧 578 不减（识别面没缩）；BENCH 14 个号 / NOTIMPL 1 个 - 台账 --prune-backlog 还清 6 条（只减不增）；@build 0 错误 0 警告 （Program Size 与改前逐字节相同：Code=213356 RO=18580 RW=1184 ZI=131480 → 证实只动了注释与日志串）；7 个改动文件 BOM/CR/U+FFFD 与 HEAD 逐项一致 剩余 15 处 DOC-ONLY 的组成（步骤 3 未完，下轮处理） - 4 处文档侧无模块码形态（TC-1003/206/501/704）→ 属 ② 大批 - TC-NET-607 一条是历史指称（原文"原 607/608/609，现 701/702/703"） - 真未实现 10 条：TC-NET-101/102/601/606/801/802/901/902/1006/1101 ——其中 801/802/901/902 曾在 2026-08 的代码里有载体、后被重构丢掉，最值得补
This commit is contained in:
@@ -277,7 +277,7 @@ static void phase1_run(void) {
|
||||
#define PHASE2_TIMEOUT_MS 10000
|
||||
#endif
|
||||
#ifndef PHASE2_TC203_TIMEOUT_MS
|
||||
#define PHASE2_TC203_TIMEOUT_MS 30000 /* TC-203 连接超时窗（指南规定 30s） */
|
||||
#define PHASE2_TC203_TIMEOUT_MS 30000 /* TC-NET-203 连接超时窗（指南规定 30s） */
|
||||
#endif
|
||||
|
||||
/* TCP Client 单次会话：对应 TC-NET-201 步 2~7 与 TC-NET-202 每轮 6 步。
|
||||
@@ -309,7 +309,7 @@ static void phase2_tc201(void)
|
||||
ch395f_set_des_port(sock, PHASE2_REMOTE_PORT);
|
||||
ch395f_set_sour_port(sock, (uint16_t)PHASE2_LOCAL_PORT);
|
||||
TEST_CHECK(ch395f_get_cmd_status() == CH395F_ERR_SUCCESS,
|
||||
"TC201 step1 cfg proto/ip/port");
|
||||
"TC-NET-201 step1 cfg proto/ip/port");
|
||||
if (ch395f_get_cmd_status() != CH395F_ERR_SUCCESS) return;
|
||||
|
||||
/* 构造 64 字节递增模式数据 0x00..0x3F */
|
||||
@@ -319,12 +319,12 @@ static void phase2_tc201(void)
|
||||
|
||||
/* 步2：OPEN Socket 0 */
|
||||
r = ch395f_open_socket(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC201 step2 open");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-201 step2 open");
|
||||
if (r != CH395F_ERR_SUCCESS) return;
|
||||
|
||||
/* 步3：CONNECT */
|
||||
r = ch395f_tcp_connect(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC201 step3 connect");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-201 step3 connect");
|
||||
if (r != CH395F_ERR_SUCCESS) { ch395f_close_socket(sock); return; }
|
||||
|
||||
/* 步4：等待 CONNECT 中断
|
||||
@@ -349,7 +349,7 @@ static void phase2_tc201(void)
|
||||
* 继续下一轮轮询等 CONNECT */
|
||||
HAL_Delay(10); /* 10ms 轮询周期，直至 CONNECT 或超时退出 */
|
||||
}
|
||||
TEST_CHECK(ok, "TC201 step4 connected");
|
||||
TEST_CHECK(ok, "TC-NET-201 step4 connected");
|
||||
if (!ok) {
|
||||
ch395f_close_socket(sock);
|
||||
return;
|
||||
@@ -367,7 +367,7 @@ static void phase2_tc201(void)
|
||||
}
|
||||
HAL_Delay(10);
|
||||
}
|
||||
TEST_CHECK(ok, "TC201 step5 sendbuf_free");
|
||||
TEST_CHECK(ok, "TC-NET-201 step5 sendbuf_free");
|
||||
if (!ok) {
|
||||
ch395f_close_socket(sock);
|
||||
return;
|
||||
@@ -419,7 +419,7 @@ static void phase2_tc201(void)
|
||||
break;
|
||||
}
|
||||
}
|
||||
TEST_CHECK(match, "TC201 step6 echo verify");
|
||||
TEST_CHECK(match, "TC-NET-201 step6 echo verify");
|
||||
|
||||
ok = 1; /* 标记"收到过数据"，循环外的 echo rcvd 检查不再重复报错 */
|
||||
break; /* 校验结论已得出，无论 PASS/FAIL 都跳出 */
|
||||
@@ -442,7 +442,7 @@ static void phase2_tc201(void)
|
||||
* ok==1：收到过数据，结果已由循环内 "echo verify" 记录；
|
||||
* ok==0：10s 内什么都没收到 / 中途断开 —— 在此补一条 FAIL。 */
|
||||
if (!ok) {
|
||||
TEST_CHECK(0, "TC201 step6 echo rcvd");
|
||||
TEST_CHECK(0, "TC-NET-201 step6 echo rcvd");
|
||||
}
|
||||
|
||||
/* 步7：关闭 Socket 并等待状态回到 CLOSED（CH395F_SOCKET_CLOSED = 0x00） */
|
||||
@@ -458,7 +458,7 @@ static void phase2_tc201(void)
|
||||
}
|
||||
HAL_Delay(50);
|
||||
}
|
||||
TEST_CHECK(ok, "TC201 step7 closed");
|
||||
TEST_CHECK(ok, "TC-NET-201 step7 closed");
|
||||
HAL_Delay(200);
|
||||
}
|
||||
|
||||
@@ -483,12 +483,12 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
/* 步1：设置本地端口并 OPEN Socket 0 */
|
||||
ch395f_set_sour_port(sock, local_port);
|
||||
r = ch395f_open_socket(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC202 step1 open");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-202 step1 open");
|
||||
if (r != CH395F_ERR_SUCCESS) return;
|
||||
|
||||
/* 步2：CONNECT */
|
||||
r = ch395f_tcp_connect(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC202 step2 connect");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-202 step2 connect");
|
||||
if (r != CH395F_ERR_SUCCESS) { ch395f_close_socket(sock); return; }
|
||||
|
||||
/* 步3：等待 CONNECT 中断 */
|
||||
@@ -498,7 +498,7 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
if (ch395f_get_sock_int_status(sock) & CH395F_SINT_STAT_CONNECT) { ok = 1; break; }
|
||||
HAL_Delay(10);
|
||||
}
|
||||
TEST_CHECK(ok, "TC202 step3 connected");
|
||||
TEST_CHECK(ok, "TC-NET-202 step3 connected");
|
||||
if (!ok) { ch395f_close_socket(sock); return; }
|
||||
HAL_Delay(100);
|
||||
|
||||
@@ -510,7 +510,7 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
if (ch395f_get_sock_int_status(sock) & CH395F_SINT_STAT_SENBUF_FREE) { ok = 1; break; }
|
||||
HAL_Delay(10);
|
||||
}
|
||||
TEST_CHECK(ok, "TC202 step4 sendbuf_free");
|
||||
TEST_CHECK(ok, "TC-NET-202 step4 sendbuf_free");
|
||||
if (!ok) { ch395f_close_socket(sock); return; }
|
||||
|
||||
/* 步5：等待回显并验证 */
|
||||
@@ -527,7 +527,7 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
for (p = 0; p < n; p++) {
|
||||
if (rx[p] != tx[p]) { match = 0; break; }
|
||||
}
|
||||
TEST_CHECK(match, "TC202 step5 echo verify");
|
||||
TEST_CHECK(match, "TC-NET-202 step5 echo verify");
|
||||
ok = 1;
|
||||
break;
|
||||
}
|
||||
@@ -535,7 +535,7 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
(CH395F_SINT_STAT_DISCONNECT | CH395F_SINT_STAT_SOCK_TIMEOUT)) break;
|
||||
HAL_Delay(50);
|
||||
}
|
||||
if (!ok) TEST_CHECK(0, "TC202 step5 echo rcvd");
|
||||
if (!ok) TEST_CHECK(0, "TC-NET-202 step5 echo rcvd");
|
||||
|
||||
/* 步6：关闭 + 等待 CLOSED */
|
||||
ch395f_close_socket(sock);
|
||||
@@ -547,7 +547,7 @@ static void phase2_tc202_once(uint8_t sock, uint16_t local_port)
|
||||
if (st[0] == CH395F_SOCKET_CLOSED) { ok = 1; break; }
|
||||
HAL_Delay(50);
|
||||
}
|
||||
TEST_CHECK(ok, "TC202 step6 closed");
|
||||
TEST_CHECK(ok, "TC-NET-202 step6 closed");
|
||||
HAL_Delay(200);
|
||||
}
|
||||
|
||||
@@ -629,12 +629,12 @@ static uint8_t tc204_session(uint8_t sock, uint16_t lport, uint8_t mode, uint8_t
|
||||
ch395f_set_sour_port(sock, lport);
|
||||
r = ch395f_open_socket(sock);
|
||||
if (r != CH395F_ERR_SUCCESS) {
|
||||
DBG_INFO("TC204 m%u r%u open ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
DBG_INFO("TC-NET-204 m%u r%u open ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
return 0;
|
||||
}
|
||||
r = ch395f_tcp_connect(sock);
|
||||
if (r != CH395F_ERR_SUCCESS) {
|
||||
DBG_INFO("TC204 m%u r%u connect cmd ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
DBG_INFO("TC-NET-204 m%u r%u connect cmd ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
ch395f_close_socket(sock);
|
||||
return 0;
|
||||
}
|
||||
@@ -648,14 +648,14 @@ static uint8_t tc204_session(uint8_t sock, uint16_t lport, uint8_t mode, uint8_t
|
||||
break;
|
||||
}
|
||||
if (si != 0U) {
|
||||
DBG_INFO("TC204 m%u r%u stale-int=0x%02X at +%ums",
|
||||
DBG_INFO("TC-NET-204 m%u r%u stale-int=0x%02X at +%ums",
|
||||
(unsigned)mode, (unsigned)round, si,
|
||||
(unsigned)(HAL_GetTick() - tick));
|
||||
}
|
||||
HAL_Delay(10);
|
||||
}
|
||||
if (!ok) {
|
||||
DBG_INFO("TC204 m%u r%u no CONNECT within %ums", (unsigned)mode, (unsigned)round,
|
||||
DBG_INFO("TC-NET-204 m%u r%u no CONNECT within %ums", (unsigned)mode, (unsigned)round,
|
||||
(unsigned)PHASE2_TIMEOUT_MS);
|
||||
ch395f_close_socket(sock);
|
||||
return 0;
|
||||
@@ -674,7 +674,7 @@ static uint8_t tc204_session(uint8_t sock, uint16_t lport, uint8_t mode, uint8_t
|
||||
HAL_Delay(10);
|
||||
}
|
||||
if (!ok) {
|
||||
DBG_INFO("TC204 m%u r%u no SENBUF_FREE", (unsigned)mode, (unsigned)round);
|
||||
DBG_INFO("TC-NET-204 m%u r%u no SENBUF_FREE", (unsigned)mode, (unsigned)round);
|
||||
ch395f_close_socket(sock);
|
||||
return 0;
|
||||
}
|
||||
@@ -694,14 +694,14 @@ static uint8_t tc204_session(uint8_t sock, uint16_t lport, uint8_t mode, uint8_t
|
||||
}
|
||||
}
|
||||
if (!match) {
|
||||
DBG_INFO("TC204 m%u r%u echo MISMATCH (rlen=%u)", (unsigned)mode,
|
||||
DBG_INFO("TC-NET-204 m%u r%u echo MISMATCH (rlen=%u)", (unsigned)mode,
|
||||
(unsigned)round, (unsigned)rlen);
|
||||
}
|
||||
return match;
|
||||
}
|
||||
HAL_Delay(20);
|
||||
}
|
||||
DBG_INFO("TC204 m%u r%u echo NOT rcvd", (unsigned)mode, (unsigned)round);
|
||||
DBG_INFO("TC-NET-204 m%u r%u echo NOT rcvd", (unsigned)mode, (unsigned)round);
|
||||
ch395f_close_socket(sock);
|
||||
return 0;
|
||||
}
|
||||
@@ -724,11 +724,11 @@ static uint8_t tc204_close_seq(uint8_t sock, uint8_t mode, uint8_t round)
|
||||
|
||||
if (mode >= 1U) {
|
||||
uint8_t r = ch395f_tcp_disconnect(sock);
|
||||
DBG_INFO("TC204 m%u r%u disconnect ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
DBG_INFO("TC-NET-204 m%u r%u disconnect ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
}
|
||||
if (mode <= 1U) {
|
||||
uint8_t r = ch395f_close_socket(sock);
|
||||
DBG_INFO("TC204 m%u r%u close ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
DBG_INFO("TC-NET-204 m%u r%u close ret=0x%02X", (unsigned)mode, (unsigned)round, r);
|
||||
}
|
||||
|
||||
tick = HAL_GetTick();
|
||||
@@ -736,7 +736,7 @@ static uint8_t tc204_close_seq(uint8_t sock, uint8_t mode, uint8_t round)
|
||||
ch395f_get_socket_status(sock, st);
|
||||
el = (uint32_t)(HAL_GetTick() - tick);
|
||||
while ((mi < n_marks) && (el >= s_marks[mi])) {
|
||||
DBG_INFO("TC204 m%u r%u poll +%ums st=0x%02X/0x%02X", (unsigned)mode,
|
||||
DBG_INFO("TC-NET-204 m%u r%u poll +%ums st=0x%02X/0x%02X", (unsigned)mode,
|
||||
(unsigned)round, (unsigned)s_marks[mi], st[0], st[1]);
|
||||
mi++;
|
||||
}
|
||||
@@ -749,10 +749,10 @@ static uint8_t tc204_close_seq(uint8_t sock, uint8_t mode, uint8_t round)
|
||||
/* 判定瞬间再读一次：byte0 已 CLOSED 时 byte1 按 §5.22/官方注释属"无意义"区 */
|
||||
ch395f_get_socket_status(sock, st);
|
||||
if (closed != 0U) {
|
||||
DBG_INFO("TC204 m%u r%u CLOSED at +%ums (byte0=0x%02X byte1=0x%02X)",
|
||||
DBG_INFO("TC-NET-204 m%u r%u CLOSED at +%ums (byte0=0x%02X byte1=0x%02X)",
|
||||
(unsigned)mode, (unsigned)round, (unsigned)el, st[0], st[1]);
|
||||
} else {
|
||||
DBG_INFO("TC204 m%u r%u NOT-CLOSED within %ums (byte0=0x%02X byte1=0x%02X)",
|
||||
DBG_INFO("TC-NET-204 m%u r%u NOT-CLOSED within %ums (byte0=0x%02X byte1=0x%02X)",
|
||||
(unsigned)mode, (unsigned)round, (unsigned)PHASE204_CLOSE_WAIT_MS,
|
||||
st[0], st[1]);
|
||||
}
|
||||
@@ -761,7 +761,7 @@ static uint8_t tc204_close_seq(uint8_t sock, uint8_t mode, uint8_t round)
|
||||
|
||||
/* 轮末收尾：关闭本轮第二条连接并等回 CLOSED
|
||||
* 说明：芯片不允许对已 OPEN 的 Socket 再 open（返回 0x20 FAIL）——不收尾则下一轮
|
||||
* 首轮 open 必失败并级联（2026-10-11 TC204 首跑实测踩过）。 */
|
||||
* 首轮 open 必失败并级联（2026-10-11 TC-NET-204 首跑实测踩过）。 */
|
||||
static void tc204_round_teardown(uint8_t sock)
|
||||
{
|
||||
uint8_t st[2] = { 0, 0 };
|
||||
@@ -788,12 +788,12 @@ static void phase2_tc204_once(uint8_t mode, uint8_t round)
|
||||
uint8_t s2;
|
||||
uint8_t closed;
|
||||
|
||||
DBG_INFO("TC204 === m%u r%u lport %u ===", (unsigned)mode, (unsigned)round,
|
||||
DBG_INFO("TC-NET-204 === m%u r%u lport %u ===", (unsigned)mode, (unsigned)round,
|
||||
(unsigned)lport);
|
||||
|
||||
/* 1. 建立真实连接（有连接才谈得上 FIN_WAIT_*） */
|
||||
s1 = tc204_session(sock, lport, mode, round);
|
||||
TEST_CHECK(s1, "TC204 m%u r%u session1 (connect+echo)", (unsigned)mode, (unsigned)round);
|
||||
TEST_CHECK(s1, "TC-NET-204 m%u r%u session1 (connect+echo)", (unsigned)mode, (unsigned)round);
|
||||
if (!s1) {
|
||||
tc204_round_teardown(sock);
|
||||
return;
|
||||
@@ -803,24 +803,24 @@ static void phase2_tc204_once(uint8_t mode, uint8_t round)
|
||||
closed = tc204_close_seq(sock, mode, round);
|
||||
if (mode == 2U) {
|
||||
/* 模式 C 的预期恰恰相反：bit3=1（§5.52 ②）下芯片不得自行关闭 Socket */
|
||||
TEST_CHECK(!closed, "TC204 m2 r%u stays OPEN after disconnect (FUN_PARA bit3)",
|
||||
TEST_CHECK(!closed, "TC-NET-204 m2 r%u stays OPEN after disconnect (FUN_PARA bit3)",
|
||||
(unsigned)round);
|
||||
if (!closed) {
|
||||
/* TRAP-NET-07 的"无法重新打开"现场：不 close 直接 open，看芯片返回什么 */
|
||||
uint8_t r = ch395f_open_socket(sock);
|
||||
DBG_INFO("TC204 m2 r%u open-without-close ret=0x%02X", (unsigned)round, r);
|
||||
DBG_INFO("TC-NET-204 m2 r%u open-without-close ret=0x%02X", (unsigned)round, r);
|
||||
/* 收尾：显式 close 并测耗时（证明 close 才是把 Socket 拉回 CLOSED 的动作） */
|
||||
(void)tc204_close_seq(sock, 0U, round);
|
||||
}
|
||||
} else {
|
||||
TEST_CHECK(closed, "TC204 m%u r%u back to CLOSED within %ums", (unsigned)mode,
|
||||
TEST_CHECK(closed, "TC-NET-204 m%u r%u back to CLOSED within %ums", (unsigned)mode,
|
||||
(unsigned)round, (unsigned)PHASE204_CLOSE_WAIT_MS);
|
||||
}
|
||||
|
||||
/* 3. 重开 + 重连 + 回显（TRAP-NET-07 的"无法重新打开"判据；TRAP-NET-09 沉降 200ms） */
|
||||
HAL_Delay(200);
|
||||
s2 = tc204_session(sock, (uint16_t)(lport + 64U), mode, round);
|
||||
TEST_CHECK(s2, "TC204 m%u r%u reopen+reconnect+echo OK", (unsigned)mode, (unsigned)round);
|
||||
TEST_CHECK(s2, "TC-NET-204 m%u r%u reopen+reconnect+echo OK", (unsigned)mode, (unsigned)round);
|
||||
tc204_round_teardown(sock);
|
||||
}
|
||||
|
||||
@@ -847,7 +847,7 @@ static void phase2_tc204(void)
|
||||
|
||||
/* TC-NET-203（硬件层）：TCP Client 连接超时（负向测试，P1）
|
||||
*
|
||||
* 前置环境：PC 未在 192.168.1.2:8081 提供服务（与 TC-201/202 互斥，
|
||||
* 前置环境：PC 未在 192.168.1.2:8081 提供服务（与 TC-NET-201/202 互斥，
|
||||
* 需先关闭 PC 端 tcp_server）。固件自行辨别环境错误：
|
||||
* 若等待期间误收到 CONNECT，说明 PC 服务未关，判 FAIL 并给出指引。
|
||||
*
|
||||
@@ -884,7 +884,7 @@ static void phase2_tc203(void)
|
||||
ch395f_set_des_port(sock, (uint16_t)PHASE2_REMOTE_PORT);
|
||||
ch395f_set_sour_port(sock, sour_port);
|
||||
TEST_CHECK(ch395f_get_cmd_status() == CH395F_ERR_SUCCESS,
|
||||
"TC203 step1 cfg proto/ip/port");
|
||||
"TC-NET-203 step1 cfg proto/ip/port");
|
||||
if (ch395f_get_cmd_status() != CH395F_ERR_SUCCESS) return;
|
||||
|
||||
/* 预清陈旧事件（TRAP-NET-12）：上一会话 close 的 DISCONNECT 可能滞后锁存
|
||||
@@ -896,11 +896,11 @@ static void phase2_tc203(void)
|
||||
/* 步2：OPEN + CONNECT。命令为异步下发，此时均应立即返回成功，
|
||||
* 真正的失败结果由步 3 的中断体现 */
|
||||
r = ch395f_open_socket(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC203 step2 open");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-203 step2 open");
|
||||
if (r != CH395F_ERR_SUCCESS) return;
|
||||
|
||||
r = ch395f_tcp_connect(sock);
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC203 step2 connect");
|
||||
TEST_CHECK(r == CH395F_ERR_SUCCESS, "TC-NET-203 step2 connect");
|
||||
if (r != CH395F_ERR_SUCCESS) { ch395f_close_socket(sock); return; }
|
||||
|
||||
/* 步3：30s 直读本 Socket SINT 轮询（读即清），等"连不上"的证据。
|
||||
@@ -963,12 +963,12 @@ static void phase2_tc203(void)
|
||||
short_tag = "T/O-slow(silence)";
|
||||
}
|
||||
DBG_INFO(" negative event @%lums: %s", elapsed, why);
|
||||
TEST_CHECK(1, "TC203 step3 no-connect OK (%lums %s)", elapsed, short_tag);
|
||||
TEST_CHECK(1, "TC-NET-203 step3 no-connect OK (%lums %s)", elapsed, short_tag);
|
||||
} else if (ev == 2) {
|
||||
DBG_ERROR(" CONNECT received -> PC 8081 server is still running!");
|
||||
TEST_CHECK(0, "TC203 step3 connected?! stop PC server and retry");
|
||||
TEST_CHECK(0, "TC-NET-203 step3 connected?! stop PC server and retry");
|
||||
} else {
|
||||
TEST_CHECK(0, "TC203 step3 no interrupt in %dms (state machine hang?)",
|
||||
TEST_CHECK(0, "TC-NET-203 step3 no interrupt in %dms (state machine hang?)",
|
||||
PHASE2_TC203_TIMEOUT_MS);
|
||||
}
|
||||
|
||||
@@ -982,7 +982,7 @@ static void phase2_tc203(void)
|
||||
if (st[0] == CH395F_SOCKET_CLOSED) { ev = 1; break; }
|
||||
HAL_Delay(50);
|
||||
}
|
||||
TEST_CHECK(ev == 1, "TC203 step4 closed");
|
||||
TEST_CHECK(ev == 1, "TC-NET-203 step4 closed");
|
||||
|
||||
HAL_Delay(200);
|
||||
}
|
||||
@@ -1599,7 +1599,7 @@ static void phase15_run(void) {
|
||||
|
||||
DBG_INFO("=== CH395F Phase 15 Tests (self-heal phase-2 primitives) ===");
|
||||
|
||||
/* ---- TC-1501: 状态回读一致性 + cmd_done 语义（E2/E3 定案形态） ---- */
|
||||
/* ---- TC-NET-1501: 状态回读一致性 + cmd_done 语义（E2/E3 定案形态） ---- */
|
||||
ch395f_set_proto_type(sn, CH395F_PROTO_TYPE_TCP);
|
||||
ch395f_set_sour_port(sn, 5107U);
|
||||
(void)ch395f_open_socket(sn);
|
||||
@@ -1609,7 +1609,7 @@ static void phase15_run(void) {
|
||||
if (ch395f_cmd_done(sn, CH395F_DONE_OPEN) == 1) { done = 1; break; }
|
||||
HAL_Delay(1);
|
||||
}
|
||||
TEST_CHECK(done == 1, "TC1501 open done within 50ms");
|
||||
TEST_CHECK(done == 1, "TC-NET-1501 open done within 50ms");
|
||||
|
||||
(void)ch395f_tcp_listen(sn);
|
||||
t0 = HAL_GetTick();
|
||||
@@ -1619,11 +1619,11 @@ static void phase15_run(void) {
|
||||
HAL_Delay(1);
|
||||
}
|
||||
/* E2 矩阵：LISTEN 可见延迟 100% <=10ms（24 轮无长尾） */
|
||||
TEST_CHECK(done == 1, "TC1501 listen done within 20ms (E2: 100 pct <=10ms)");
|
||||
TEST_CHECK(ch395f_sock_is_listening(sn) == 1, "TC1501 cached is_listening");
|
||||
TEST_CHECK(done == 1, "TC-NET-1501 listen done within 20ms (E2: 100 pct <=10ms)");
|
||||
TEST_CHECK(ch395f_sock_is_listening(sn) == 1, "TC-NET-1501 cached is_listening");
|
||||
st = ch395f_sock_state_cached(sn);
|
||||
TEST_CHECK(st.open == CH395F_SOCKET_OPEN && st.tcp_state == CH395F_TCP_LISTEN,
|
||||
"TC1501 cached state 05/01 (got %02X/%02X)", st.open, st.tcp_state);
|
||||
"TC-NET-1501 cached state 05/01 (got %02X/%02X)", st.open, st.tcp_state);
|
||||
|
||||
/* 二段关闭实证（2026-10-13 本 TC 二跑定案）：LISTEN 态 Socket 的
|
||||
* CLOSE_SOCKET 返 SUCCESS 但只拆监听（TCP 01->00），byte0 恒 05；
|
||||
@@ -1631,10 +1631,10 @@ static void phase15_run(void) {
|
||||
* sock_reset 状态机在 WAIT_CLOSE 阶段自行补发（见 ch395f.c）。 */
|
||||
uint8_t close_st = ch395f_close_socket(sn);
|
||||
TEST_CHECK(close_st == CH395F_ERR_SUCCESS,
|
||||
"TC1501 close cmd st=0x%02X (expect 00)", close_st);
|
||||
"TC-NET-1501 close cmd st=0x%02X (expect 00)", close_st);
|
||||
st = ch395f_get_sock_state(sn);
|
||||
TEST_CHECK(st.open == CH395F_SOCKET_OPEN && st.tcp_state == CH395F_TCP_CLOSED,
|
||||
"TC1501 listen-close stage1: 05/00 listen torn down (got %02X/%02X)",
|
||||
"TC-NET-1501 listen-close stage1: 05/00 listen torn down (got %02X/%02X)",
|
||||
st.open, st.tcp_state);
|
||||
(void)ch395f_close_socket(sn);
|
||||
t0 = HAL_GetTick();
|
||||
@@ -1643,20 +1643,20 @@ static void phase15_run(void) {
|
||||
if (ch395f_cmd_done(sn, CH395F_DONE_CLOSE) == 1) { done = (int)(HAL_GetTick() - t0); break; }
|
||||
HAL_Delay(1);
|
||||
}
|
||||
TEST_CHECK(done >= 0, "TC1501 listen-close stage2: byte0=00 in %dms (win 500)", done);
|
||||
TEST_CHECK(done >= 0, "TC-NET-1501 listen-close stage2: byte0=00 in %dms (win 500)", done);
|
||||
st = ch395f_get_sock_state(sn);
|
||||
TEST_CHECK(st.tcp_state == CH395F_SOCK_STATE_NONE,
|
||||
"TC1501 tcp_state sentinel 0xFF when closed (got %02X)", st.tcp_state);
|
||||
"TC-NET-1501 tcp_state sentinel 0xFF when closed (got %02X)", st.tcp_state);
|
||||
st = ch395f_get_sock_state(8U);
|
||||
TEST_CHECK(st.open == CH395F_SOCKET_CLOSED && st.tcp_state == CH395F_SOCK_STATE_NONE,
|
||||
"TC1501 sn=8 boundary -> CLOSED+sentinel");
|
||||
"TC-NET-1501 sn=8 boundary -> CLOSED+sentinel");
|
||||
|
||||
/* ---- TC-1502: sock_reset 非阻塞状态机跑通（E4 定案序列） ---- */
|
||||
/* ---- TC-NET-1502: sock_reset 非阻塞状态机跑通（E4 定案序列） ---- */
|
||||
(void)ch395f_open_socket(sn);
|
||||
rc = ch395f_sock_reset_begin(sn, CH395F_RESET_QUARANTINE);
|
||||
TEST_CHECK(rc == 0, "TC1502 begin accepted (rc=%d)", rc);
|
||||
TEST_CHECK(rc == 0, "TC-NET-1502 begin accepted (rc=%d)", rc);
|
||||
TEST_CHECK(ch395f_sock_reset_begin(sn, CH395F_RESET_QUARANTINE) == -1,
|
||||
"TC1502 busy reject on second begin");
|
||||
"TC-NET-1502 busy reject on second begin");
|
||||
t0 = HAL_GetTick();
|
||||
rc = 1;
|
||||
while (rc == 1 && (uint32_t)(HAL_GetTick() - t0) < 3000U) {
|
||||
@@ -1664,15 +1664,15 @@ static void phase15_run(void) {
|
||||
HAL_Delay(1);
|
||||
}
|
||||
/* QUARANTINE 最短等待 400ms + 各阶段，3s 窗内必落定 */
|
||||
TEST_CHECK(rc == 0, "TC1502 reset done within 3000ms (rc=%d)", rc);
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_CLOSE) == 1, "TC1502 chip CLOSED after reset");
|
||||
TEST_CHECK(ch395f_sock_reset_poll(sn) == 0, "TC1502 poll idempotent after done");
|
||||
TEST_CHECK(rc == 0, "TC-NET-1502 reset done within 3000ms (rc=%d)", rc);
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_CLOSE) == 1, "TC-NET-1502 chip CLOSED after reset");
|
||||
TEST_CHECK(ch395f_sock_reset_poll(sn) == 0, "TC-NET-1502 poll idempotent after done");
|
||||
/* 复位后可重开（复位语义 = 回到可用态） */
|
||||
(void)ch395f_open_socket(sn);
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_OPEN) == 1, "TC1502 reopen after reset OK");
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_OPEN) == 1, "TC-NET-1502 reopen after reset OK");
|
||||
(void)ch395f_close_socket(sn);
|
||||
|
||||
/* TC-1502b: LISTEN 态 Socket 复位（走 WAIT_CLOSE 二段补发路径，GRACEFUL） */
|
||||
/* TC-NET-1502b: LISTEN 态 Socket 复位（走 WAIT_CLOSE 二段补发路径，GRACEFUL） */
|
||||
(void)ch395f_open_socket(sn);
|
||||
(void)ch395f_tcp_listen(sn);
|
||||
rc = ch395f_sock_reset_begin(sn, CH395F_RESET_GRACEFUL);
|
||||
@@ -1682,16 +1682,16 @@ static void phase15_run(void) {
|
||||
rc = ch395f_sock_reset_poll(sn);
|
||||
HAL_Delay(1);
|
||||
}
|
||||
TEST_CHECK(rc == 0, "TC1502b reset on LISTEN socket done (rc=%d, two-stage absorbed)", rc);
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_CLOSE) == 1, "TC1502b chip CLOSED after listen-reset");
|
||||
TEST_CHECK(rc == 0, "TC-NET-1502b reset on LISTEN socket done (rc=%d, two-stage absorbed)", rc);
|
||||
TEST_CHECK(ch395f_cmd_done(sn, CH395F_DONE_CLOSE) == 1, "TC-NET-1502b chip CLOSED after listen-reset");
|
||||
|
||||
/* ---- TC-1503: 链路态缓存 + 事件护栏边界 ---- */
|
||||
/* ---- TC-NET-1503: 链路态缓存 + 事件护栏边界 ---- */
|
||||
uint16_t c0 = ch395f_link_change_count();
|
||||
ch395f_glob_event_feed(CH395F_GINT_STAT_PHY_CHANGE); /* 首次 feed 建档 */
|
||||
ch395f_glob_event_feed(CH395F_GINT_STAT_PHY_CHANGE); /* 链路稳定：不应虚增计数 */
|
||||
TEST_CHECK(ch395f_link_change_count() == c0, "TC1503 no spurious link change on stable link");
|
||||
TEST_CHECK(ch395f_link_up_cached() == 1U, "TC1503 link_up cached (bench link present)");
|
||||
TEST_CHECK(ch395f_sock_events(8U) == 0U, "TC1503 sock_events sn=8 boundary -> 0");
|
||||
TEST_CHECK(ch395f_link_change_count() == c0, "TC-NET-1503 no spurious link change on stable link");
|
||||
TEST_CHECK(ch395f_link_up_cached() == 1U, "TC-NET-1503 link_up cached (bench link present)");
|
||||
TEST_CHECK(ch395f_sock_events(8U) == 0U, "TC-NET-1503 sock_events sn=8 boundary -> 0");
|
||||
(void)ch395f_sock_events(sn); /* 读即清护栏：合法调用不崩 */
|
||||
|
||||
TEST_REPORT("Phase 15");
|
||||
|
||||
Reference in New Issue
Block a user