{
  "schema": 1,
  "generated_from": "docs/编号规范.md §7 迁移映射 + §4.3 冻结前缀；本表只登记**仓库里已实际出现**的旧字面量 → 现行字面量，不做尚未落地的批量改写（§7.2 阶段 1 一律保留存量）",
  "note": "旧号引用不因本表而改写：本表只让门禁把「旧号引用」判成可解析（校验 3 悬空引用 / 校验 4 重复定义）。批量改写属 §9 阶段 1，须逐批 dry-run + 三重复核（§7.3）。 带 scope 的条目只在所列文件内生效（同一裸形字面量可能属多族，全局别名会把真撞号洗成已解析）。 带 scope 的条目只在所列文件内生效（同一裸形字面量可能属多族，全局别名会把真撞号洗成已解析）。",
  "aliases": {
    "N-31": {
      "to": null,
      "status": "void",
      "note": "2026-10-11 的 Phase 7 复跑项已随销项消失；2026-10-14 同号被新条目复用造成撞号（docs/任务规划/README.md §0 注）→ 历史引用指向旧条目，新含义一律改语义标识"
    },
    "N-32": {
      "to": null,
      "status": "void",
      "note": "监听生命周期模块化条目已销项，但被 docs/网络/ 三篇与多处代码注释引用（docs/编号规范.md §1.2 列为悬空引用实锤）→ §7.2 待处置：改指 docs/网络/网络自愈架构设计.md §9.3 或就地展开"
    },
    "N-33": {
      "to": null,
      "status": "void",
      "note": "栈余量收口条目已随 M1 台架闭环销项（2026-10-12），登记簿行已删，结论在 docs/内存管理/RAM使用分析与优化方案.md §1.4"
    },
    "N-30": {
      "to": null,
      "status": "resolved-in-place",
      "note": "sock_reset 原语收口受阻项：登记簿行仍在（2026-10-14 建档），编号规范 §4.1 误记为已销项 → 以登记簿为准"
    },
    "Trap 19": {
      "to": null,
      "status": "void",
      "note": "从未存在的陷阱号被 docs/测试说明/CH395F_Test_Guide.md 引用（§1.2 / §7.2：删除或改指实际条目）"
    },
    "PHY": {
      "to": "NET",
      "status": "module-code",
      "note": "§6 废止模块码：TM-PHY-01~11 → TM-NET-01~11（历史文档不回改，新文档按 §6 表）"
    },
    "NAND": {
      "to": "GD5F",
      "status": "module-code",
      "note": "§6 废止模块码：TC-NAND-* / TM-NAND-* → GD5F"
    },
    "S0": {
      "to": "MENU-STATE-00",
      "status": "renamed",
      "scope": [
        "simulator/tests/check_menu_rows.py",
        "docs/UI设计/UI_自动化测试流程.md",
        "simulator/README.md"
      ],
      "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S1": [
      {
        "to": "MENU-STATE-01",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-01",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S2": [
      {
        "to": "MENU-STATE-02",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-02",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S3": [
      {
        "to": "MENU-STATE-03",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-03",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S4": [
      {
        "to": "MENU-STATE-04",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-04",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S5": [
      {
        "to": "MENU-STATE-05",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-05",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S6": [
      {
        "to": "MENU-STATE-06",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-06",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S7": [
      {
        "to": "MENU-STATE-07",
        "status": "renamed",
        "scope": [
          "simulator/tests/check_menu_rows.py",
          "docs/UI设计/UI_自动化测试流程.md",
          "simulator/README.md"
        ],
        "note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      },
      {
        "to": "CODE-RULE-07",
        "status": "renamed",
        "scope": [
          "scripts/check_coding_standard.py",
          "docs/代码规范/pre-commit使用说明.md"
        ],
        "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
      }
    ],
    "S10": {
      "to": "CODE-RULE-10",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S11": {
      "to": "CODE-RULE-11",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S12": {
      "to": "CODE-RULE-12",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S13": {
      "to": "CODE-RULE-13",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S15": {
      "to": "CODE-RULE-15",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S16": {
      "to": "CODE-RULE-16",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S17": {
      "to": "CODE-RULE-17",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S18": {
      "to": "CODE-RULE-18",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S19": {
      "to": "CODE-RULE-19",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S8": {
      "to": "CODE-RULE-08",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    },
    "S9": {
      "to": "CODE-RULE-09",
      "status": "renamed",
      "scope": [
        "scripts/check_coding_standard.py",
        "docs/代码规范/pre-commit使用说明.md"
      ],
      "note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
    }
  },
  "id_aliases": {}
}