{
  "schema": 1,
  "note": "编号债务台账（docs/编号规范.md §8.4）：--strict 只对**台账之外**的新错误级问题拦提交。台账只许减不许增——还清的用 --prune-backlog 收掉；确需新增一条必须写 reason 字段说明这笔债为什么该存在，默认禁止顺手加行（否则一周后台账就变成第二个 backlog）。指纹 = 文件 + 校验号 + 字面量，不含行号（行号会漂，用它台账天天假新增）。",
  "generated_by": "scripts/check_ids.py --write-backlog",
  "total_error_findings": 651,
  "decidable_ratio_at_generation": 82.94,
  "entries": [
    {
      "file": ".dsh/skills/serial-assistant/scripts/serial_tool.py",
      "code": 2,
      "literal": "T1",
      "count": 1
    },
    {
      "file": ".dsh/skills/ui-verify/SKILL.md",
      "code": 6,
      "literal": "R-9",
      "count": 1
    },
    {
      "file": ".gitea/workflows/ci.yml",
      "code": 2,
      "literal": "S3",
      "count": 3
    },
    {
      "file": ".pre-commit-config.yaml",
      "code": 6,
      "literal": "D-2",
      "count": 2
    },
    {
      "file": ".pre-commit-config.yaml",
      "code": 6,
      "literal": "D-3",
      "count": 1
    },
    {
      "file": ".pre-commit-config.yaml",
      "code": 6,
      "literal": "D-7",
      "count": 3
    },
    {
      "file": ".pre-commit-config.yaml",
      "code": 6,
      "literal": "F-1",
      "count": 1
    },
    {
      "file": "App/algo/freq.c",
      "code": 2,
      "literal": "S2",
      "count": 2
    },
    {
      "file": "App/app/app_cfg.h",
      "code": 6,
      "literal": "P2-12",
      "count": 1
    },
    {
      "file": "App/cfg/cfg_file.c",
      "code": 6,
      "literal": "P0-1",
      "count": 1
    },
    {
      "file": "App/cfg/cfg_file.c",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "App/cfg/cfg_file.c",
      "code": 6,
      "literal": "P2-1",
      "count": 6
    },
    {
      "file": "App/cfg/cfg_file.c",
      "code": 6,
      "literal": "P3-1",
      "count": 1
    },
    {
      "file": "App/cfg/cfg_file.h",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "App/cfg/cfg_file_store_mcu.c",
      "code": 6,
      "literal": "P0-1",
      "count": 2
    },
    {
      "file": "App/cfg/cfg_file_store_mcu.c",
      "code": 6,
      "literal": "P3-2",
      "count": 3
    },
    {
      "file": "App/log/console_log.c",
      "code": 2,
      "literal": "gen-288",
      "count": 3
    },
    {
      "file": "App/log/sys_log_mcu.c",
      "code": 6,
      "literal": "P2-10",
      "count": 3
    },
    {
      "file": "App/log/sys_log_mcu.c",
      "code": 6,
      "literal": "P2-9",
      "count": 4
    },
    {
      "file": "App/task/adc_task.c",
      "code": 6,
      "literal": "P3-11",
      "count": 1
    },
    {
      "file": "App/task/default_task.c",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "App/task/default_task.c",
      "code": 6,
      "literal": "P2-9",
      "count": 1
    },
    {
      "file": "App/task/iec104_serv.c",
      "code": 2,
      "literal": "I-1",
      "count": 1
    },
    {
      "file": "App/task/net_task.c",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "App/task/net_task.c",
      "code": 6,
      "literal": "P1-6",
      "count": 1
    },
    {
      "file": "App/task/net_task.c",
      "code": 6,
      "literal": "P1-8",
      "count": 5
    },
    {
      "file": "App/task/net_task.c",
      "code": 6,
      "literal": "P2-11",
      "count": 1
    },
    {
      "file": "App/task/net_task.h",
      "code": 6,
      "literal": "P1-6",
      "count": 1
    },
    {
      "file": "App/task/rs485_task.c",
      "code": 6,
      "literal": "P3-11",
      "count": 1
    },
    {
      "file": "Drivers/BSP/CH395F/ch395f.c",
      "code": 6,
      "literal": "P2-2",
      "count": 5
    },
    {
      "file": "Drivers/BSP/CH395F/ch395f.h",
      "code": 6,
      "literal": "P1-06",
      "count": 1
    },
    {
      "file": "Drivers/BSP/CH395F/ch395f.h",
      "code": 6,
      "literal": "P2-2",
      "count": 1
    },
    {
      "file": "Drivers/BSP/NET/net_select.c",
      "code": 6,
      "literal": "P2-7",
      "count": 2
    },
    {
      "file": "Drivers/BSP/NET/net_socket.c",
      "code": 6,
      "literal": "P1-7",
      "count": 1
    },
    {
      "file": "Drivers/BSP/NETCFG/net_cfg.c",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "Drivers/BSP/NETCFG/net_cfg.h",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "Drivers/BSP/RS485/rs485.c",
      "code": 6,
      "literal": "P3-4",
      "count": 1
    },
    {
      "file": "Drivers/BSP/UI/ui_net_sink.c",
      "code": 2,
      "literal": "I-1",
      "count": 2
    },
    {
      "file": "Drivers/BSP/UI/ui_net_sink.c",
      "code": 2,
      "literal": "I-2",
      "count": 3
    },
    {
      "file": "Src/freertos.c",
      "code": 6,
      "literal": "P1-6",
      "count": 1
    },
    {
      "file": "Src/freertos.c",
      "code": 6,
      "literal": "P2-13",
      "count": 1
    },
    {
      "file": "docs/CI/远程CI完整指南.md",
      "code": 2,
      "literal": "S3",
      "count": 2
    },
    {
      "file": "docs/CI/远程CI完整指南.md",
      "code": 6,
      "literal": "D-3",
      "count": 1
    },
    {
      "file": "docs/README.md",
      "code": 2,
      "literal": "T1",
      "count": 1
    },
    {
      "file": "docs/README.md",
      "code": 2,
      "literal": "Task #32",
      "count": 1
    },
    {
      "file": "docs/README.md",
      "code": 6,
      "literal": "D-3",
      "count": 1
    },
    {
      "file": "docs/README.md",
      "code": 6,
      "literal": "D-6",
      "count": 4
    },
    {
      "file": "docs/README.md",
      "code": 6,
      "literal": "D-7",
      "count": 3
    },
    {
      "file": "docs/UI设计/UI_自动化测试流程.md",
      "code": 6,
      "literal": "F-1",
      "count": 1
    },
    {
      "file": "docs/UI设计/UI_设计架构.md",
      "code": 6,
      "literal": "F-1",
      "count": 1
    },
    {
      "file": "docs/UI设计/内容页架构.md",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "docs/UI设计/菜单页面设计.md",
      "code": 2,
      "literal": "陷阱 3",
      "count": 1
    },
    {
      "file": "docs/产品需求/产品需求设计文档.md",
      "code": 6,
      "literal": "P0-1",
      "count": 1
    },
    {
      "file": "docs/代码规范/pre-commit使用说明.md",
      "code": 2,
      "literal": "T1",
      "count": 1
    },
    {
      "file": "docs/代码规范/pre-commit使用说明.md",
      "code": 2,
      "literal": "W1-0",
      "count": 1
    },
    {
      "file": "docs/代码规范/pre-commit使用说明.md",
      "code": 6,
      "literal": "D-2",
      "count": 3
    },
    {
      "file": "docs/代码规范/pre-commit使用说明.md",
      "code": 6,
      "literal": "D-3",
      "count": 3
    },
    {
      "file": "docs/代码规范/pre-commit使用说明.md",
      "code": 6,
      "literal": "D-7",
      "count": 3
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 2,
      "literal": "W1-0",
      "count": 2
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-2",
      "count": 3
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-3",
      "count": 3
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-4",
      "count": 3
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-5",
      "count": 1
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-6",
      "count": 3
    },
    {
      "file": "docs/任务规划/README.md",
      "code": 6,
      "literal": "R-9",
      "count": 3
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 2,
      "literal": "gen 181",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 2,
      "literal": "gen-288",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "F-1",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "R-2",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "R-3",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "R-4",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "R-6",
      "count": 1
    },
    {
      "file": "docs/任务规划/登记簿.md",
      "code": 6,
      "literal": "R-9",
      "count": 2
    },
    {
      "file": "docs/内存管理/RAM使用分析与优化方案.md",
      "code": 2,
      "literal": "S2",
      "count": 1
    },
    {
      "file": "docs/内存管理/RAM使用分析与优化方案.md",
      "code": 2,
      "literal": "S3",
      "count": 2
    },
    {
      "file": "docs/内存管理/RAM使用分析与优化方案.md",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "docs/内存管理/RAM预算台账.md",
      "code": 2,
      "literal": "W1-0",
      "count": 2
    },
    {
      "file": "docs/内存管理/RAM预算台账.md",
      "code": 6,
      "literal": "R-2",
      "count": 5
    },
    {
      "file": "docs/内存管理/RAM预算台账.md",
      "code": 6,
      "literal": "R-9",
      "count": 3
    },
    {
      "file": "docs/内存管理/内存内容分配策略.md",
      "code": 2,
      "literal": "gen68",
      "count": 2
    },
    {
      "file": "docs/内存管理/内存内容分配策略.md",
      "code": 6,
      "literal": "R-4",
      "count": 1
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P0-1",
      "count": 3
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P0-2",
      "count": 7
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P0-3",
      "count": 3
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P1-4",
      "count": 6
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P1-5",
      "count": 3
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P2-6",
      "count": 1
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P2-7",
      "count": 1
    },
    {
      "file": "docs/内存管理/存储栈RAM优化调研.md",
      "code": 6,
      "literal": "P2-8",
      "count": 1
    },
    {
      "file": "docs/子系统设计/IEC104上行设计说明.md",
      "code": 2,
      "literal": "I-1",
      "count": 1
    },
    {
      "file": "docs/子系统设计/控制台单写者日志设计说明.md",
      "code": 2,
      "literal": "gen-288",
      "count": 2
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "P1-4a",
      "count": 1
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "Task #32",
      "count": 2
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "gen-288",
      "count": 1
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "round 3",
      "count": 1
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "round 7",
      "count": 2
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 2,
      "literal": "round 8",
      "count": 1
    },
    {
      "file": "docs/子系统设计/看门狗设计说明.md",
      "code": 3,
      "literal": "N-03",
      "count": 2
    },
    {
      "file": "docs/子系统设计/运行与自检记录设计说明.md",
      "code": 2,
      "literal": "S2",
      "count": 1
    },
    {
      "file": "docs/子系统设计/运行与自检记录设计说明.md",
      "code": 2,
      "literal": "S3",
      "count": 1
    },
    {
      "file": "docs/子系统设计/运行与自检记录设计说明.md",
      "code": 6,
      "literal": "P2-10",
      "count": 1
    },
    {
      "file": "docs/子系统设计/运行与自检记录设计说明.md",
      "code": 6,
      "literal": "R-1",
      "count": 1
    },
    {
      "file": "docs/子系统设计/运行与自检记录设计说明.md",
      "code": 6,
      "literal": "R-2",
      "count": 1
    },
    {
      "file": "docs/子系统设计/配置文件设计说明.md",
      "code": 6,
      "literal": "P0-1",
      "count": 7
    },
    {
      "file": "docs/子系统设计/配置文件设计说明.md",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "docs/子系统设计/配置文件设计说明.md",
      "code": 6,
      "literal": "P1-5",
      "count": 1
    },
    {
      "file": "docs/文档规范.md",
      "code": 6,
      "literal": "D-6",
      "count": 3
    },
    {
      "file": "docs/文档规范.md",
      "code": 6,
      "literal": "D-7",
      "count": 4
    },
    {
      "file": "docs/架构设计/项目架构总览.md",
      "code": 6,
      "literal": "P2-13",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-01A",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-02A",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-02B",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-02C",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-03A",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-04A",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-ADCIN-04B",
      "count": 1
    },
    {
      "file": "docs/测试说明/ADC输入层单元测试说明.md",
      "code": 2,
      "literal": "TC-AI-03A",
      "count": 1
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "DP-01",
      "count": 16
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "DP-02",
      "count": 5
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "DP-03",
      "count": 7
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "DP-04",
      "count": 13
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "TC-302",
      "count": 1
    },
    {
      "file": "docs/测试说明/CH395F_Test_Guide.md",
      "code": 2,
      "literal": "TC-501",
      "count": 1
    },
    {
      "file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
      "code": 2,
      "literal": "TC-1003",
      "count": 1
    },
    {
      "file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
      "code": 2,
      "literal": "TC-206",
      "count": 1
    },
    {
      "file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
      "code": 2,
      "literal": "TC-704",
      "count": 2
    },
    {
      "file": "docs/测试说明/串口助手设计说明.md",
      "code": 2,
      "literal": "S2",
      "count": 1
    },
    {
      "file": "docs/测试说明/串口助手设计说明.md",
      "code": 2,
      "literal": "S3",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 2,
      "literal": "round 1",
      "count": 3
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 2,
      "literal": "round 3",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 2,
      "literal": "round 7",
      "count": 2
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 3,
      "literal": "N-03",
      "count": 2
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "H-1",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "H-7",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "L-2",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "L-4",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "P0-1",
      "count": 1
    },
    {
      "file": "docs/测试说明/实机测试实施指南.md",
      "code": 6,
      "literal": "P1-8",
      "count": 5
    },
    {
      "file": "docs/测试说明/模拟器差距清单.md",
      "code": 6,
      "literal": "P0-1",
      "count": 1
    },
    {
      "file": "docs/测试说明/测试开发标准流程.md",
      "code": 2,
      "literal": "DP-01",
      "count": 1
    },
    {
      "file": "docs/测试说明/测试开发标准流程.md",
      "code": 2,
      "literal": "S2",
      "count": 2
    },
    {
      "file": "docs/测试说明/测试开发标准流程.md",
      "code": 2,
      "literal": "S3",
      "count": 2
    },
    {
      "file": "docs/测试说明/测试开发标准流程.md",
      "code": 6,
      "literal": "P1-6",
      "count": 4
    },
    {
      "file": "docs/测试说明/测试开发标准流程.md",
      "code": 6,
      "literal": "P1-9",
      "count": 2
    },
    {
      "file": "docs/测试说明/测试文档模板规范.md",
      "code": 2,
      "literal": "DP-01",
      "count": 2
    },
    {
      "file": "docs/测试说明/测试文档模板规范.md",
      "code": 2,
      "literal": "DP-02",
      "count": 1
    },
    {
      "file": "docs/测试说明/测试文档模板规范.md",
      "code": 3,
      "literal": "TC-XXX-001",
      "count": 2
    },
    {
      "file": "docs/测试说明/测试文档模板规范.md",
      "code": 3,
      "literal": "TM-NAND-01",
      "count": 1
    },
    {
      "file": "docs/测试说明/测试文档模板规范.md",
      "code": 3,
      "literal": "TM-XXX-01",
      "count": 1
    },
    {
      "file": "docs/测试说明/链路延迟测试说明.md",
      "code": 2,
      "literal": "S2",
      "count": 2
    },
    {
      "file": "docs/测试说明/链路延迟测试说明.md",
      "code": 2,
      "literal": "S3",
      "count": 1
    },
    {
      "file": "docs/环境与部署/并行任务工作树方案.md",
      "code": 2,
      "literal": "trap22",
      "count": 1
    },
    {
      "file": "docs/环境与部署/项目部署环境要求.md",
      "code": 6,
      "literal": "P2-12",
      "count": 1
    },
    {
      "file": "docs/硬件平台/ADC通道映射说明.md",
      "code": 6,
      "literal": "P1-5",
      "count": 2,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "A-10",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "A-11",
      "count": 2,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-1",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-10",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-2",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-3",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-4",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-5",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-6",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-7",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-8",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "C-9",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 1,
      "literal": "FOC-817",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 3,
      "literal": "A-2",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 3,
      "literal": "A-3",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 3,
      "literal": "A-6",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 3,
      "literal": "A-8",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 3,
      "literal": "A-9",
      "count": 2,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 5,
      "literal": "A-8",
      "count": 1,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/硬件平台/V0.0_网表详细分析报告.md",
      "code": 5,
      "literal": "A-9",
      "count": 2,
      "reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
    },
    {
      "file": "docs/网络/BSD_Socket_API_使用指南.md",
      "code": 6,
      "literal": "P1-3",
      "count": 1
    },
    {
      "file": "docs/网络/BSD_Socket_API_函数调用关系.md",
      "code": 2,
      "literal": "T1",
      "count": 4
    },
    {
      "file": "docs/网络/BSD_Socket_API_函数调用关系.md",
      "code": 6,
      "literal": "P1-7",
      "count": 2
    },
    {
      "file": "docs/网络/网络自愈架构设计.md",
      "code": 2,
      "literal": "T1",
      "count": 1
    },
    {
      "file": "docs/问题记录/CH395F_Trap_Records.md",
      "code": 2,
      "literal": "round 1",
      "count": 1
    },
    {
      "file": "docs/问题记录/GD5F2GQ5UE_Trap_Records.md",
      "code": 2,
      "literal": "gen 45",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 2,
      "literal": "W1-0",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P1-10",
      "count": 3
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-10",
      "count": 2
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-13",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-14",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-15",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-5",
      "count": 2
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-6",
      "count": 1
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-8",
      "count": 2
    },
    {
      "file": "docs/问题记录/项目审查与优化建议报告.md",
      "code": 6,
      "literal": "P2-9",
      "count": 2
    },
    {
      "file": "scripts/README.md",
      "code": 6,
      "literal": "D-2",
      "count": 1
    },
    {
      "file": "scripts/README.md",
      "code": 6,
      "literal": "D-3",
      "count": 1
    },
    {
      "file": "scripts/README.md",
      "code": 6,
      "literal": "D-7",
      "count": 1
    },
    {
      "file": "scripts/check_doc_links.py",
      "code": 6,
      "literal": "D-3",
      "count": 1
    },
    {
      "file": "scripts/check_lv_conf_sync.py",
      "code": 6,
      "literal": "F-1",
      "count": 1
    },
    {
      "file": "scripts/check_mem_numbers.py",
      "code": 6,
      "literal": "D-7",
      "count": 2
    },
    {
      "file": "scripts/check_test_traceability.py",
      "code": 2,
      "literal": "TC-014",
      "count": 1
    },
    {
      "file": "scripts/check_test_traceability.py",
      "code": 3,
      "literal": "TC-XXX-003b",
      "count": 1
    },
    {
      "file": "scripts/ci_local.py",
      "code": 2,
      "literal": "S3",
      "count": 2
    },
    {
      "file": "scripts/gen_task_table.py",
      "code": 6,
      "literal": "D-2",
      "count": 1
    },
    {
      "file": "scripts/gen_task_table.py",
      "code": 6,
      "literal": "D-7",
      "count": 1
    },
    {
      "file": "scripts/ram_baseline.py",
      "code": 2,
      "literal": "W1-0",
      "count": 1
    },
    {
      "file": "scripts/ram_baseline.py",
      "code": 6,
      "literal": "R-9",
      "count": 1
    },
    {
      "file": "scripts/rename_ids.py",
      "code": 2,
      "literal": "S3",
      "count": 2
    },
    {
      "file": "scripts/rename_ids.py",
      "code": 3,
      "literal": "TC-PROTSET-11",
      "count": 1
    },
    {
      "file": "simulator/lv_conf.h",
      "code": 6,
      "literal": "F-2",
      "count": 1
    },
    {
      "file": "simulator/sim/cfg_file_store_sim.c",
      "code": 6,
      "literal": "P0-1",
      "count": 1
    },
    {
      "file": "simulator/tests/check_content_pages.py",
      "code": 6,
      "literal": "F-2",
      "count": 1
    },
    {
      "file": "simulator/tests/check_menu_rows.py",
      "code": 6,
      "literal": "F-2",
      "count": 1
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 2,
      "literal": "DP-04",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 2,
      "literal": "TC-301",
      "count": 2
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 2,
      "literal": "TC-302",
      "count": 2
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-01",
      "count": 5
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-02",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-03",
      "count": 5
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-04",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-05",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-06",
      "count": 4
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-07",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-08",
      "count": 3
    },
    {
      "file": "test/board/ch395f_test_task.c",
      "code": 6,
      "literal": "P1-09",
      "count": 5
    },
    {
      "file": "test/board/gd5f_test_task.c",
      "code": 3,
      "literal": "TC-GD5F-1101",
      "count": 3
    },
    {
      "file": "test/board/gd5f_test_task.c",
      "code": 3,
      "literal": "TC-GD5F-1102",
      "count": 1
    },
    {
      "file": "test/board/net_latency_test.c",
      "code": 6,
      "literal": "P1-06",
      "count": 1
    },
    {
      "file": "test/board/net_test_task.c",
      "code": 6,
      "literal": "P1-9",
      "count": 1
    },
    {
      "file": "test/board/test_config.h",
      "code": 6,
      "literal": "P2-13",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-003B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-003C",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-003D",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-005B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-01A",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-02A",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-02B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-02C",
      "count": 2
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-03A",
      "count": 2
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-03B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-03C",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-03D",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-03E",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-04A",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-04B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-074B",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 2,
      "literal": "TC-ADCIN-09A",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-031",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-032",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-036",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-037",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-038",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-071",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-072",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-073",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-074",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-075",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-076",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-078",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-081",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-082",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-083",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-084",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-085",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-087",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-088",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-089",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-091",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-092",
      "count": 1
    },
    {
      "file": "test/host/adc_input/adc_input_test.c",
      "code": 3,
      "literal": "TC-ADCIN-093",
      "count": 1
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 2,
      "literal": "TC-010",
      "count": 1
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 2,
      "literal": "TC-014",
      "count": 2
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 3,
      "literal": "TC-CONFIG-024",
      "count": 2
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 3,
      "literal": "TC-CONFIG-044",
      "count": 2
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 3,
      "literal": "TC-CONFIG-052",
      "count": 1
    },
    {
      "file": "test/host/cfg_file/cfg_file_test.c",
      "code": 6,
      "literal": "P2-1",
      "count": 2
    },
    {
      "file": "test/host/ch395f_socket_test.py",
      "code": 2,
      "literal": "TC-301",
      "count": 9
    },
    {
      "file": "test/host/ch395f_socket_test.py",
      "code": 2,
      "literal": "TC-302",
      "count": 9
    },
    {
      "file": "test/host/ch395f_socket_test.py",
      "code": 2,
      "literal": "TC-602",
      "count": 2
    },
    {
      "file": "test/host/e11_keepalive_probe.py",
      "code": 2,
      "literal": "T1",
      "count": 2
    },
    {
      "file": "test/host/ftp_auth_bench.py",
      "code": 2,
      "literal": "T1",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-001",
      "count": 4
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-002",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-003",
      "count": 5
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-004",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-005",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-006",
      "count": 11
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-007",
      "count": 7
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-008",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-009",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-010",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-011",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-012",
      "count": 5
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-013",
      "count": 5
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-014",
      "count": 7
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-015",
      "count": 4
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-016",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-017",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-018",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-019",
      "count": 1
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-020",
      "count": 7
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-021",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-022",
      "count": 3
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-023",
      "count": 2
    },
    {
      "file": "test/host/iec104/iec104_test.c",
      "code": 2,
      "literal": "TC-024",
      "count": 11
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-001",
      "count": 9
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-002",
      "count": 4
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-003",
      "count": 6
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-004",
      "count": 3
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-005",
      "count": 4
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-006",
      "count": 4
    },
    {
      "file": "test/host/soe/soe_test.c",
      "code": 2,
      "literal": "TC-007",
      "count": 2
    },
    {
      "file": "test/run_all_suites.py",
      "code": 6,
      "literal": "P1-10",
      "count": 1
    },
    {
      "file": "test/run_all_suites.py",
      "code": 6,
      "literal": "P1-9",
      "count": 1
    },
    {
      "file": "tools/netlist_semantics/gen_kb.py",
      "code": 2,
      "literal": "T1",
      "count": 7
    },
    {
      "file": "tools/netlist_semantics/netlist_sem.py",
      "code": 2,
      "literal": "T1",
      "count": 1
    },
    {
      "file": "tools/netlist_semantics/pinout_kb.json",
      "code": 2,
      "literal": "T1",
      "count": 7
    }
  ]
}