Files
STM32F4-Base/test/host/ioboard
wandering1 50ee1b4402 docs(ioboard): tighten shadow-register note and fix polarity item ref
Two comment-only follow-ups carried over from gate #33 (both deferred
by the reviewer to keep the accepted face frozen; no code, no size
impact - attestation restamped after a no-diff rebuild):

- Drivers/BSP/IOBOARD/README.md item 6: the "what I last asked for"
  gloss of the software shadow register is exact for the 9 relay/LED
  bits but not for bit6, which ioboard_do_get() reports as the
  driver-synthesised supply state. Qualify it in place and point at
  item 4 for the rule instead of restating it.
- test/host/ioboard/ioboard_test.c: the ACTIVE-level comment says the
  polarity fact lives in README section 6 item 7; it has always been
  item 5 (item 7 is the PE2/PE4 naming residue). This test is the
  polarity pin, so a wrong cross-ref here is the worst place to
  leave one.
2026-11-18 19:41:24 +08:00
..