Files
STM32F4-Base/ui_menu_tree.txt
T
wandering1 515db819ab feat(ui): fold board inputs and outputs into the telemetry page
The 12 board-level rows now live at the end of the 遥信量 page instead of
a separate 开入开出 page: 8 opto inputs (DI_A..DI_H) and 4 relay outputs
(KO6/TRIP/ERT/CLZ). 33 rows become 45, five pages become six. The
standalone page, its menu entry, its golden references and both build
registrations are removed.

Folding the display is not folding the point table. The board rows
render from dio_di_* / dio_do_* and stay out of yx_bits / yx_valid /
yx_dp: any change to those carriers is provably absent from this diff.
IEC 104 mapping and YX_VALID_MASK are untouched, so nothing new is
reported to a master station.

Input polarity was wrong and is fixed here. On this board a 24 V input
drives the opto, which pulls the 74HC165 pin LOW, so the raw mask is
inverted relative to "has signal". The bit assembly only reordered bits;
nothing converted the level. The screen showed 分 on every channel no
matter what the operator drove in. Polarity now converts once, in the
driver, behind IOBOARD_DI_LEVEL_ACTIVE (0 = active low), so callers see
1 = has signal for both inputs and outputs.

Verified on the board: page 5 shows YX33 followed immediately by DI_A,
crossing the 33-point boundary with no drift; DI_C reads 合 because the
operator's signal is on channel C, the other seven read 分; page 6 shows
DI_H then all four outputs 释放. Page rows end at y=134, the footer
starts at y=144.

Input bit order is only partly verified: channel C was confirmed against
a real signal, the other seven have not been exercised channel by
channel. The board detects the presence of 24 V, not contact closure,
and the output rows show the shadow register (our intent) rather than
mechanical contact feedback. All three limits are recorded in the page
header and in the IOBOARD README.

Also adds a polarity guard to the host tests: the input polarity was
flipped once already, and until now no assertion would have caught a
silent re-flip, since only the DO side was pinned.
2026-11-16 23:30:35 +08:00

62 lines
2.8 KiB
Plaintext

# 主菜单层级定义(声明式源)
# 规则:缩进即层级,每级 2 空格;`#` 开头为注释;空行忽略。
# 行尾可选 ` #P` = 该叶子需密码(密码页按所输密码授权:查看密码→只读 / 修改密码→可修改);无尾注 = 不需密码页(直接进,只读)。
# 密码值:Drivers/BSP/UI/ui_pwd_def.h 编译期配置(查看/修改各一个,改值 = 重新编译)。
# 行尾可选 ` #page=<模块名>` = 该叶子绑定一个内容页实例(UI 页面原型化的页面注册表):
# 模块名 = Drivers/BSP/UI/ui_page_<模块名>.c,其描述符符号须为 ui_page_<模块名>_desc。
# 声明了 #page 但实例文件缺失/符号不符 → 生成器报错(不产出半成品表)。
# 未被任何叶子 #page 引用的 ui_page_*.c 同样报错(写了却从不生效的死代码)。
# 注:密码页**不是**节点绑定的(任何 #P 叶子都进同一页),故由下方 @password 指令单独声明。
# 指令(整份文件级,写在注释行里):
# # @password=<模块名> = 需密码叶子统一进的内容页模块名(省略 = 无密码页)。
# 改菜单/改页面绑定只需编辑本文件,然后重跑:
# python tools/menu_gen/gen_menu.py
# 产物:Drivers/BSP/UI/ui_menu_tab.c / ui_menu_tab.h
# Drivers/BSP/UI/ui_page_registry.c / ui_page_registry.h(节点→页面注册表,自动生成)
# 生成器并自动把新增的 ui_page_*.c 写进 MDK-ARM/STM32F407-Demo.uvprojx 与
# simulator/CMakeLists.txt 两处显式列表(双端注册),无需手工编辑注册文件。
# @password=password
主界面
装置信息 #page=device_info
实时数据
交流量 #page=ac
直流量 #page=dc
遥信量 #page=yx
参数定值
整定
参数 #P #page=view_param
定值 #P #page=view_set
控制字 #P #page=view_word
软压板 #P #page=view_plate
查看
参数 #page=view_param
定值 #page=view_set
控制字 #page=view_word
软压板 #page=view_plate
三遥设置
遥测死区 #P #page=deadband
遥测系数 #P #page=calib
遥信类型 #P
遥信防抖 #P
双点遥信 #P
装置维护
时钟设置 #P #page=clock
强制复归 #P #page=reset
手动录波 #P #page=wave_manual
清除记录 #P #page=clear
通讯参数
通讯设置 #P #page=comm
网口设置 #P #page=net_cfg
SNTP设置 #P #page=sntp
记录查询
SOE记录 #page=soe
事故记录 #page=accident
操作记录 #page=oper
保护告警 #page=alarm
保护启动 #page=start
遥控记录 #page=yk
自检记录 #page=selftest
运行记录 #page=runlog
运行报告 #page=runreport
录波回放 #page=wave_play