wandering1/STM32F4-Base
1
0
Fork 0
Code Issues 30 Pull Requests Actions Packages Projects 2 Releases Wiki Activity
Files
1e6996ecd099934a3ac526a6f01f16a02d290a59
STM32F4-Base/scripts/id_known_backlog.json
T
wandering1 af411866a8 feat(门禁): 批 9 位号规则扩展到引脚名 + 修 --prune-backlog 丢 reason 的 bug 
规则扩展（scripts/check_ids.py，两处共用同一正则）
- 原：^[RCDJXUT][0-9]{1,3}（单字母位号）
- 现：再加 ^[A-Z]{2,3}[0-9]{1,2}(-[0-9]{1,2})? → 收掉硬件语料里的**引脚名 / 总线名 /
  网名 / 引脚区间**：PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3、AIN1 这类
- 关键边界：带连字符的一字母形态（C-10 / A-9 / N-18 / D-7）与 TC-206、TC1003 **不落在
  新形状里**，照旧判定 → 报告自有条目号这类真编号没被顺手挡掉（实测台账仍留 21 类真债）
- 位号与引脚名都不进 refs_total：错误级 661 → **651**，refs_total 8807 → 8797（同步 −10），
  可判定比例 82.84% → **82.94%**（分母没被噪声灌水，涨幅来自噪声出清而非真进展）

修自己的 bug：--prune-backlog 会静默丢掉 reason 字段
- 症状：收账一次后，那 28 类硬件存量条目的「这笔债为什么该存在」说明全部消失
- 根因：prune 用 dict 字面量重建条目，只写了 file/code/literal/count 四个键
- 修法：改为从原始 JSON 取整条再覆盖 count，其它字段原样保留；已实测幂等
  （再跑一次「还清 0 条、剩 313 条、带 reason 仍 21 类」）
- 21 类真债的 reason 已重新写回，内容含一条判断：器件料号 FOC-817 **不做**形状规则，
  因为 [A-Z]{3}-\d{3} 与真家族 DEF-* 撞形，宁可留一条记账也不制造盲区

验证：id-check --strict 通过（存量 651 全在台账内、无未登记新账）；
doc-links --all 失效与待确认均 0；未改 C/H 不需 @build；台账只减不增
2026-10-22 08:49:39 +08:00

1909 lines
52 KiB
JSON
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
{
"schema": 1,
"note": "编号债务台账（docs/编号规范.md §8.4）：--strict 只对**台账之外**的新错误级问题拦提交。台账只许减不许增——还清的用 --prune-backlog 收掉；确需新增一条必须写 reason 字段说明这笔债为什么该存在，默认禁止顺手加行（否则一周后台账就变成第二个 backlog）。指纹 = 文件 + 校验号 + 字面量，不含行号（行号会漂，用它台账天天假新增）。",
"generated_by": "scripts/check_ids.py --write-backlog",
"total_error_findings": 651,
"decidable_ratio_at_generation": 82.94,
"entries": [
{
"file": ".dsh/skills/serial-assistant/scripts/serial_tool.py",
"code": 2,
"literal": "T1",
"count": 1
},
{
"file": ".dsh/skills/ui-verify/SKILL.md",
"code": 6,
"literal": "R-9",
"count": 1
},
{
"file": ".gitea/workflows/ci.yml",
"code": 2,
"literal": "S3",
"count": 3
},
{
"file": ".pre-commit-config.yaml",
"code": 6,
"literal": "D-2",
"count": 2
},
{
"file": ".pre-commit-config.yaml",
"code": 6,
"literal": "D-3",
"count": 1
},
{
"file": ".pre-commit-config.yaml",
"code": 6,
"literal": "D-7",
"count": 3
},
{
"file": ".pre-commit-config.yaml",
"code": 6,
"literal": "F-1",
"count": 1
},
{
"file": "App/algo/freq.c",
"code": 2,
"literal": "S2",
"count": 2
},
{
"file": "App/app/app_cfg.h",
"code": 6,
"literal": "P2-12",
"count": 1
},
{
"file": "App/cfg/cfg_file.c",
"code": 6,
"literal": "P0-1",
"count": 1
},
{
"file": "App/cfg/cfg_file.c",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "App/cfg/cfg_file.c",
"code": 6,
"literal": "P2-1",
"count": 6
},
{
"file": "App/cfg/cfg_file.c",
"code": 6,
"literal": "P3-1",
"count": 1
},
{
"file": "App/cfg/cfg_file.h",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "App/cfg/cfg_file_store_mcu.c",
"code": 6,
"literal": "P0-1",
"count": 2
},
{
"file": "App/cfg/cfg_file_store_mcu.c",
"code": 6,
"literal": "P3-2",
"count": 3
},
{
"file": "App/log/console_log.c",
"code": 2,
"literal": "gen-288",
"count": 3
},
{
"file": "App/log/sys_log_mcu.c",
"code": 6,
"literal": "P2-10",
"count": 3
},
{
"file": "App/log/sys_log_mcu.c",
"code": 6,
"literal": "P2-9",
"count": 4
},
{
"file": "App/task/adc_task.c",
"code": 6,
"literal": "P3-11",
"count": 1
},
{
"file": "App/task/default_task.c",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "App/task/default_task.c",
"code": 6,
"literal": "P2-9",
"count": 1
},
{
"file": "App/task/iec104_serv.c",
"code": 2,
"literal": "I-1",
"count": 1
},
{
"file": "App/task/net_task.c",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "App/task/net_task.c",
"code": 6,
"literal": "P1-6",
"count": 1
},
{
"file": "App/task/net_task.c",
"code": 6,
"literal": "P1-8",
"count": 5
},
{
"file": "App/task/net_task.c",
"code": 6,
"literal": "P2-11",
"count": 1
},
{
"file": "App/task/net_task.h",
"code": 6,
"literal": "P1-6",
"count": 1
},
{
"file": "App/task/rs485_task.c",
"code": 6,
"literal": "P3-11",
"count": 1
},
{
"file": "Drivers/BSP/CH395F/ch395f.c",
"code": 6,
"literal": "P2-2",
"count": 5
},
{
"file": "Drivers/BSP/CH395F/ch395f.h",
"code": 6,
"literal": "P1-06",
"count": 1
},
{
"file": "Drivers/BSP/CH395F/ch395f.h",
"code": 6,
"literal": "P2-2",
"count": 1
},
{
"file": "Drivers/BSP/NET/net_select.c",
"code": 6,
"literal": "P2-7",
"count": 2
},
{
"file": "Drivers/BSP/NET/net_socket.c",
"code": 6,
"literal": "P1-7",
"count": 1
},
{
"file": "Drivers/BSP/NETCFG/net_cfg.c",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "Drivers/BSP/NETCFG/net_cfg.h",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "Drivers/BSP/RS485/rs485.c",
"code": 6,
"literal": "P3-4",
"count": 1
},
{
"file": "Drivers/BSP/UI/ui_net_sink.c",
"code": 2,
"literal": "I-1",
"count": 2
},
{
"file": "Drivers/BSP/UI/ui_net_sink.c",
"code": 2,
"literal": "I-2",
"count": 3
},
{
"file": "Src/freertos.c",
"code": 6,
"literal": "P1-6",
"count": 1
},
{
"file": "Src/freertos.c",
"code": 6,
"literal": "P2-13",
"count": 1
},
{
"file": "docs/CI/远程CI完整指南.md",
"code": 2,
"literal": "S3",
"count": 2
},
{
"file": "docs/CI/远程CI完整指南.md",
"code": 6,
"literal": "D-3",
"count": 1
},
{
"file": "docs/README.md",
"code": 2,
"literal": "T1",
"count": 1
},
{
"file": "docs/README.md",
"code": 2,
"literal": "Task #32",
"count": 1
},
{
"file": "docs/README.md",
"code": 6,
"literal": "D-3",
"count": 1
},
{
"file": "docs/README.md",
"code": 6,
"literal": "D-6",
"count": 4
},
{
"file": "docs/README.md",
"code": 6,
"literal": "D-7",
"count": 3
},
{
"file": "docs/UI设计/UI_自动化测试流程.md",
"code": 6,
"literal": "F-1",
"count": 1
},
{
"file": "docs/UI设计/UI_设计架构.md",
"code": 6,
"literal": "F-1",
"count": 1
},
{
"file": "docs/UI设计/内容页架构.md",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "docs/UI设计/菜单页面设计.md",
"code": 2,
"literal": "陷阱 3",
"count": 1
},
{
"file": "docs/产品需求/产品需求设计文档.md",
"code": 6,
"literal": "P0-1",
"count": 1
},
{
"file": "docs/代码规范/pre-commit使用说明.md",
"code": 2,
"literal": "T1",
"count": 1
},
{
"file": "docs/代码规范/pre-commit使用说明.md",
"code": 2,
"literal": "W1-0",
"count": 1
},
{
"file": "docs/代码规范/pre-commit使用说明.md",
"code": 6,
"literal": "D-2",
"count": 3
},
{
"file": "docs/代码规范/pre-commit使用说明.md",
"code": 6,
"literal": "D-3",
"count": 3
},
{
"file": "docs/代码规范/pre-commit使用说明.md",
"code": 6,
"literal": "D-7",
"count": 3
},
{
"file": "docs/任务规划/README.md",
"code": 2,
"literal": "W1-0",
"count": 2
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-2",
"count": 3
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-3",
"count": 3
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-4",
"count": 3
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-5",
"count": 1
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-6",
"count": 3
},
{
"file": "docs/任务规划/README.md",
"code": 6,
"literal": "R-9",
"count": 3
},
{
"file": "docs/任务规划/登记簿.md",
"code": 2,
"literal": "gen 181",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 2,
"literal": "gen-288",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "F-1",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "R-2",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "R-3",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "R-4",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "R-6",
"count": 1
},
{
"file": "docs/任务规划/登记簿.md",
"code": 6,
"literal": "R-9",
"count": 2
},
{
"file": "docs/内存管理/RAM使用分析与优化方案.md",
"code": 2,
"literal": "S2",
"count": 1
},
{
"file": "docs/内存管理/RAM使用分析与优化方案.md",
"code": 2,
"literal": "S3",
"count": 2
},
{
"file": "docs/内存管理/RAM使用分析与优化方案.md",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "docs/内存管理/RAM预算台账.md",
"code": 2,
"literal": "W1-0",
"count": 2
},
{
"file": "docs/内存管理/RAM预算台账.md",
"code": 6,
"literal": "R-2",
"count": 5
},
{
"file": "docs/内存管理/RAM预算台账.md",
"code": 6,
"literal": "R-9",
"count": 3
},
{
"file": "docs/内存管理/内存内容分配策略.md",
"code": 2,
"literal": "gen68",
"count": 2
},
{
"file": "docs/内存管理/内存内容分配策略.md",
"code": 6,
"literal": "R-4",
"count": 1
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P0-1",
"count": 3
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P0-2",
"count": 7
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P0-3",
"count": 3
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P1-4",
"count": 6
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P1-5",
"count": 3
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P2-6",
"count": 1
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P2-7",
"count": 1
},
{
"file": "docs/内存管理/存储栈RAM优化调研.md",
"code": 6,
"literal": "P2-8",
"count": 1
},
{
"file": "docs/子系统设计/IEC104上行设计说明.md",
"code": 2,
"literal": "I-1",
"count": 1
},
{
"file": "docs/子系统设计/控制台单写者日志设计说明.md",
"code": 2,
"literal": "gen-288",
"count": 2
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "P1-4a",
"count": 1
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "Task #32",
"count": 2
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "gen-288",
"count": 1
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "round 3",
"count": 1
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "round 7",
"count": 2
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 2,
"literal": "round 8",
"count": 1
},
{
"file": "docs/子系统设计/看门狗设计说明.md",
"code": 3,
"literal": "N-03",
"count": 2
},
{
"file": "docs/子系统设计/运行与自检记录设计说明.md",
"code": 2,
"literal": "S2",
"count": 1
},
{
"file": "docs/子系统设计/运行与自检记录设计说明.md",
"code": 2,
"literal": "S3",
"count": 1
},
{
"file": "docs/子系统设计/运行与自检记录设计说明.md",
"code": 6,
"literal": "P2-10",
"count": 1
},
{
"file": "docs/子系统设计/运行与自检记录设计说明.md",
"code": 6,
"literal": "R-1",
"count": 1
},
{
"file": "docs/子系统设计/运行与自检记录设计说明.md",
"code": 6,
"literal": "R-2",
"count": 1
},
{
"file": "docs/子系统设计/配置文件设计说明.md",
"code": 6,
"literal": "P0-1",
"count": 7
},
{
"file": "docs/子系统设计/配置文件设计说明.md",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "docs/子系统设计/配置文件设计说明.md",
"code": 6,
"literal": "P1-5",
"count": 1
},
{
"file": "docs/文档规范.md",
"code": 6,
"literal": "D-6",
"count": 3
},
{
"file": "docs/文档规范.md",
"code": 6,
"literal": "D-7",
"count": 4
},
{
"file": "docs/架构设计/项目架构总览.md",
"code": 6,
"literal": "P2-13",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-01A",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-02A",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-02B",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-02C",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-03A",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-04A",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-ADCIN-04B",
"count": 1
},
{
"file": "docs/测试说明/ADC输入层单元测试说明.md",
"code": 2,
"literal": "TC-AI-03A",
"count": 1
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "DP-01",
"count": 16
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "DP-02",
"count": 5
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "DP-03",
"count": 7
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "DP-04",
"count": 13
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "TC-302",
"count": 1
},
{
"file": "docs/测试说明/CH395F_Test_Guide.md",
"code": 2,
"literal": "TC-501",
"count": 1
},
{
"file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
"code": 2,
"literal": "TC-1003",
"count": 1
},
{
"file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
"code": 2,
"literal": "TC-206",
"count": 1
},
{
"file": "docs/测试说明/GD5F2GQ5UE_Test_Guide.md",
"code": 2,
"literal": "TC-704",
"count": 2
},
{
"file": "docs/测试说明/串口助手设计说明.md",
"code": 2,
"literal": "S2",
"count": 1
},
{
"file": "docs/测试说明/串口助手设计说明.md",
"code": 2,
"literal": "S3",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 2,
"literal": "round 1",
"count": 3
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 2,
"literal": "round 3",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 2,
"literal": "round 7",
"count": 2
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 3,
"literal": "N-03",
"count": 2
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "H-1",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "H-7",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "L-2",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "L-4",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "P0-1",
"count": 1
},
{
"file": "docs/测试说明/实机测试实施指南.md",
"code": 6,
"literal": "P1-8",
"count": 5
},
{
"file": "docs/测试说明/模拟器差距清单.md",
"code": 6,
"literal": "P0-1",
"count": 1
},
{
"file": "docs/测试说明/测试开发标准流程.md",
"code": 2,
"literal": "DP-01",
"count": 1
},
{
"file": "docs/测试说明/测试开发标准流程.md",
"code": 2,
"literal": "S2",
"count": 2
},
{
"file": "docs/测试说明/测试开发标准流程.md",
"code": 2,
"literal": "S3",
"count": 2
},
{
"file": "docs/测试说明/测试开发标准流程.md",
"code": 6,
"literal": "P1-6",
"count": 4
},
{
"file": "docs/测试说明/测试开发标准流程.md",
"code": 6,
"literal": "P1-9",
"count": 2
},
{
"file": "docs/测试说明/测试文档模板规范.md",
"code": 2,
"literal": "DP-01",
"count": 2
},
{
"file": "docs/测试说明/测试文档模板规范.md",
"code": 2,
"literal": "DP-02",
"count": 1
},
{
"file": "docs/测试说明/测试文档模板规范.md",
"code": 3,
"literal": "TC-XXX-001",
"count": 2
},
{
"file": "docs/测试说明/测试文档模板规范.md",
"code": 3,
"literal": "TM-NAND-01",
"count": 1
},
{
"file": "docs/测试说明/测试文档模板规范.md",
"code": 3,
"literal": "TM-XXX-01",
"count": 1
},
{
"file": "docs/测试说明/链路延迟测试说明.md",
"code": 2,
"literal": "S2",
"count": 2
},
{
"file": "docs/测试说明/链路延迟测试说明.md",
"code": 2,
"literal": "S3",
"count": 1
},
{
"file": "docs/环境与部署/并行任务工作树方案.md",
"code": 2,
"literal": "trap22",
"count": 1
},
{
"file": "docs/环境与部署/项目部署环境要求.md",
"code": 6,
"literal": "P2-12",
"count": 1
},
{
"file": "docs/硬件平台/ADC通道映射说明.md",
"code": 6,
"literal": "P1-5",
"count": 2,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "A-10",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "A-11",
"count": 2,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-1",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-10",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-2",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-3",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-4",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-5",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-6",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-7",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-8",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "C-9",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 1,
"literal": "FOC-817",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 3,
"literal": "A-2",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 3,
"literal": "A-3",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 3,
"literal": "A-6",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 3,
"literal": "A-8",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 3,
"literal": "A-9",
"count": 2,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 5,
"literal": "A-8",
"count": 1,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/硬件平台/V0.0_网表详细分析报告.md",
"code": 5,
"literal": "A-9",
"count": 2,
"reason": "硬件语料（docs/硬件平台/）2026-10-22 首次纳入扫描暴露的**先前不可见存量**，非本批新引入。引脚名/总线名/网名（PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3 一类）已由 check_ids.py 的位号规则挡掉且不进比例分母；本条是**真编号**：报告自有条目号（C-x / A-x）或需紧邻文档名，待逐条归位（§4.3 快照族登记或补文档名）。器件料号 FOC-817 也留在此记账——不给它做形状规则，因为 [A-Z]{3}-\\d{3} 会与真家族 DEF-* 撞形，宁可留一条债也不制造盲区。"
},
{
"file": "docs/网络/BSD_Socket_API_使用指南.md",
"code": 6,
"literal": "P1-3",
"count": 1
},
{
"file": "docs/网络/BSD_Socket_API_函数调用关系.md",
"code": 2,
"literal": "T1",
"count": 4
},
{
"file": "docs/网络/BSD_Socket_API_函数调用关系.md",
"code": 6,
"literal": "P1-7",
"count": 2
},
{
"file": "docs/网络/网络自愈架构设计.md",
"code": 2,
"literal": "T1",
"count": 1
},
{
"file": "docs/问题记录/CH395F_Trap_Records.md",
"code": 2,
"literal": "round 1",
"count": 1
},
{
"file": "docs/问题记录/GD5F2GQ5UE_Trap_Records.md",
"code": 2,
"literal": "gen 45",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 2,
"literal": "W1-0",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P1-10",
"count": 3
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-10",
"count": 2
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-13",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-14",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-15",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-5",
"count": 2
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-6",
"count": 1
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-8",
"count": 2
},
{
"file": "docs/问题记录/项目审查与优化建议报告.md",
"code": 6,
"literal": "P2-9",
"count": 2
},
{
"file": "scripts/README.md",
"code": 6,
"literal": "D-2",
"count": 1
},
{
"file": "scripts/README.md",
"code": 6,
"literal": "D-3",
"count": 1
},
{
"file": "scripts/README.md",
"code": 6,
"literal": "D-7",
"count": 1
},
{
"file": "scripts/check_doc_links.py",
"code": 6,
"literal": "D-3",
"count": 1
},
{
"file": "scripts/check_lv_conf_sync.py",
"code": 6,
"literal": "F-1",
"count": 1
},
{
"file": "scripts/check_mem_numbers.py",
"code": 6,
"literal": "D-7",
"count": 2
},
{
"file": "scripts/check_test_traceability.py",
"code": 2,
"literal": "TC-014",
"count": 1
},
{
"file": "scripts/check_test_traceability.py",
"code": 3,
"literal": "TC-XXX-003b",
"count": 1
},
{
"file": "scripts/ci_local.py",
"code": 2,
"literal": "S3",
"count": 2
},
{
"file": "scripts/gen_task_table.py",
"code": 6,
"literal": "D-2",
"count": 1
},
{
"file": "scripts/gen_task_table.py",
"code": 6,
"literal": "D-7",
"count": 1
},
{
"file": "scripts/ram_baseline.py",
"code": 2,
"literal": "W1-0",
"count": 1
},
{
"file": "scripts/ram_baseline.py",
"code": 6,
"literal": "R-9",
"count": 1
},
{
"file": "scripts/rename_ids.py",
"code": 2,
"literal": "S3",
"count": 2
},
{
"file": "scripts/rename_ids.py",
"code": 3,
"literal": "TC-PROTSET-11",
"count": 1
},
{
"file": "simulator/lv_conf.h",
"code": 6,
"literal": "F-2",
"count": 1
},
{
"file": "simulator/sim/cfg_file_store_sim.c",
"code": 6,
"literal": "P0-1",
"count": 1
},
{
"file": "simulator/tests/check_content_pages.py",
"code": 6,
"literal": "F-2",
"count": 1
},
{
"file": "simulator/tests/check_menu_rows.py",
"code": 6,
"literal": "F-2",
"count": 1
},
{
"file": "test/board/ch395f_test_task.c",
"code": 2,
"literal": "DP-04",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 2,
"literal": "TC-301",
"count": 2
},
{
"file": "test/board/ch395f_test_task.c",
"code": 2,
"literal": "TC-302",
"count": 2
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-01",
"count": 5
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-02",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-03",
"count": 5
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-04",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-05",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-06",
"count": 4
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-07",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-08",
"count": 3
},
{
"file": "test/board/ch395f_test_task.c",
"code": 6,
"literal": "P1-09",
"count": 5
},
{
"file": "test/board/gd5f_test_task.c",
"code": 3,
"literal": "TC-GD5F-1101",
"count": 3
},
{
"file": "test/board/gd5f_test_task.c",
"code": 3,
"literal": "TC-GD5F-1102",
"count": 1
},
{
"file": "test/board/net_latency_test.c",
"code": 6,
"literal": "P1-06",
"count": 1
},
{
"file": "test/board/net_test_task.c",
"code": 6,
"literal": "P1-9",
"count": 1
},
{
"file": "test/board/test_config.h",
"code": 6,
"literal": "P2-13",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-003B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-003C",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-003D",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-005B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-01A",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-02A",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-02B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-02C",
"count": 2
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-03A",
"count": 2
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-03B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-03C",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-03D",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-03E",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-04A",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-04B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-074B",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 2,
"literal": "TC-ADCIN-09A",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-031",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-032",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-036",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-037",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-038",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-071",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-072",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-073",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-074",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-075",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-076",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-078",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-081",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-082",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-083",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-084",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-085",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-087",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-088",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-089",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-091",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-092",
"count": 1
},
{
"file": "test/host/adc_input/adc_input_test.c",
"code": 3,
"literal": "TC-ADCIN-093",
"count": 1
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 2,
"literal": "TC-010",
"count": 1
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 2,
"literal": "TC-014",
"count": 2
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 3,
"literal": "TC-CONFIG-024",
"count": 2
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 3,
"literal": "TC-CONFIG-044",
"count": 2
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 3,
"literal": "TC-CONFIG-052",
"count": 1
},
{
"file": "test/host/cfg_file/cfg_file_test.c",
"code": 6,
"literal": "P2-1",
"count": 2
},
{
"file": "test/host/ch395f_socket_test.py",
"code": 2,
"literal": "TC-301",
"count": 9
},
{
"file": "test/host/ch395f_socket_test.py",
"code": 2,
"literal": "TC-302",
"count": 9
},
{
"file": "test/host/ch395f_socket_test.py",
"code": 2,
"literal": "TC-602",
"count": 2
},
{
"file": "test/host/e11_keepalive_probe.py",
"code": 2,
"literal": "T1",
"count": 2
},
{
"file": "test/host/ftp_auth_bench.py",
"code": 2,
"literal": "T1",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-001",
"count": 4
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-002",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-003",
"count": 5
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-004",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-005",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-006",
"count": 11
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-007",
"count": 7
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-008",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-009",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-010",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-011",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-012",
"count": 5
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-013",
"count": 5
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-014",
"count": 7
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-015",
"count": 4
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-016",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-017",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-018",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-019",
"count": 1
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-020",
"count": 7
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-021",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-022",
"count": 3
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-023",
"count": 2
},
{
"file": "test/host/iec104/iec104_test.c",
"code": 2,
"literal": "TC-024",
"count": 11
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-001",
"count": 9
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-002",
"count": 4
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-003",
"count": 6
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-004",
"count": 3
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-005",
"count": 4
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-006",
"count": 4
},
{
"file": "test/host/soe/soe_test.c",
"code": 2,
"literal": "TC-007",
"count": 2
},
{
"file": "test/run_all_suites.py",
"code": 6,
"literal": "P1-10",
"count": 1
},
{
"file": "test/run_all_suites.py",
"code": 6,
"literal": "P1-9",
"count": 1
},
{
"file": "tools/netlist_semantics/gen_kb.py",
"code": 2,
"literal": "T1",
"count": 7
},
{
"file": "tools/netlist_semantics/netlist_sem.py",
"code": 2,
"literal": "T1",
"count": 1
},
{
"file": "tools/netlist_semantics/pinout_kb.json",
"code": 2,
"literal": "T1",
"count": 7
}
]
}
Reference in New Issue View Git Blame Copy Permalink