Files
STM32F4-Base/ui_menu_tree.txt
T
wandering1 2b466b85f0 feat(ui): add DI/DO status page showing 8 inputs and 4 outputs
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.

Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:

  defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
    → ioboard_di_snap_lookup()  [new registration channel]
    → ui_data_feed_tick() (uiTask, 200 ms)
    → ui_data_rt_t.dio_di_* / dio_do_*

No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).

Semantic honesty, recorded in ui_page_di_do.c and README §6:
  · Output state is the software shadow register (ODR mirror), NOT a
    mechanical contact feedback — this platform has no auxiliary contact
    readback path. ioboard_do_read_level() also reads ODR, so comparing
    the two is tautological.
  · IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
    schematic.
  · Input bit order has not been verified by manual shorting. The
    2026-11-16 run read 0x00 eight times because the operator had no time
    to short each channel — the data path itself was fine.
  · Board-level inputs are deliberately kept out of the 33-point telemetry
    bitmap (IEC 104 point-table semantics); the two have no mapping.

Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.

Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.

Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.

Reviewed independently; zero blocking findings.
2026-11-16 21:45:08 +08:00

63 lines
2.8 KiB
Plaintext

# 主菜单层级定义(声明式源)
# 规则:缩进即层级,每级 2 空格;`#` 开头为注释;空行忽略。
# 行尾可选 ` #P` = 该叶子需密码(密码页按所输密码授权:查看密码→只读 / 修改密码→可修改);无尾注 = 不需密码页(直接进,只读)。
# 密码值:Drivers/BSP/UI/ui_pwd_def.h 编译期配置(查看/修改各一个,改值 = 重新编译)。
# 行尾可选 ` #page=<模块名>` = 该叶子绑定一个内容页实例(UI 页面原型化的页面注册表):
# 模块名 = Drivers/BSP/UI/ui_page_<模块名>.c,其描述符符号须为 ui_page_<模块名>_desc。
# 声明了 #page 但实例文件缺失/符号不符 → 生成器报错(不产出半成品表)。
# 未被任何叶子 #page 引用的 ui_page_*.c 同样报错(写了却从不生效的死代码)。
# 注:密码页**不是**节点绑定的(任何 #P 叶子都进同一页),故由下方 @password 指令单独声明。
# 指令(整份文件级,写在注释行里):
# # @password=<模块名> = 需密码叶子统一进的内容页模块名(省略 = 无密码页)。
# 改菜单/改页面绑定只需编辑本文件,然后重跑:
# python tools/menu_gen/gen_menu.py
# 产物:Drivers/BSP/UI/ui_menu_tab.c / ui_menu_tab.h
# Drivers/BSP/UI/ui_page_registry.c / ui_page_registry.h(节点→页面注册表,自动生成)
# 生成器并自动把新增的 ui_page_*.c 写进 MDK-ARM/STM32F407-Demo.uvprojx 与
# simulator/CMakeLists.txt 两处显式列表(双端注册),无需手工编辑注册文件。
# @password=password
主界面
装置信息 #page=device_info
实时数据
交流量 #page=ac
直流量 #page=dc
遥信量 #page=yx
开入开出 #page=di_do
参数定值
整定
参数 #P #page=view_param
定值 #P #page=view_set
控制字 #P #page=view_word
软压板 #P #page=view_plate
查看
参数 #page=view_param
定值 #page=view_set
控制字 #page=view_word
软压板 #page=view_plate
三遥设置
遥测死区 #P #page=deadband
遥测系数 #P #page=calib
遥信类型 #P
遥信防抖 #P
双点遥信 #P
装置维护
时钟设置 #P #page=clock
强制复归 #P #page=reset
手动录波 #P #page=wave_manual
清除记录 #P #page=clear
通讯参数
通讯设置 #P #page=comm
网口设置 #P #page=net_cfg
SNTP设置 #P #page=sntp
记录查询
SOE记录 #page=soe
事故记录 #page=accident
操作记录 #page=oper
保护告警 #page=alarm
保护启动 #page=start
遥控记录 #page=yk
自检记录 #page=selftest
运行记录 #page=runlog
运行报告 #page=runreport
录波回放 #page=wave_play