2e9272cc8a
引入成熟 IEC 60870-5-104 子站的只读子集(App/protocol/iec60870,28 个源文件 按原字节复制,UPSTREAM.sha256 记录来源,兼容补丁保留全部断言与容量),在其上 装配单属主共享核心(Start/Poll/Stop/Get_Status),并把标准 DTU 演示点表全量 接入为唯一真源。 - iec104_core:threadless 推进,poll 零等待,通知/交互/COV 扫描全部有界; 生命周期区分失败启动待重试、重复启动拒绝、断线保固化 RAM。 - iec104_dtu_table / iec104_source:标准 DTU 全点表注册,无数据源的点读 0, 遥控只做模拟状态可读回,不触碰实际出口。 - iec104_sim:仅窗口与独立服务模式起真实 TCP,无头黄金模式保持确定性假统计。 - test/host/iec104_dtu:独立真实 TCP 11 项、传输层 10 项、生命周期与借用负例。 验证:lvgl_sim 真实 TCP 11/11、传输 10/10,UI 像素回归未回退;AC5 单 TU 编译 0 错误 0 诊断。板端尚未切换:完整库闭包 RAM 超 92% 门禁净增预算 25730B, 结论为停止转实施,记录在 IEC104_MCU最小可行性验证.md。旧实现与 board 服务 保持原样,未提交 MDK 工程改动,未烧板。
78 lines
4.6 KiB
C
78 lines
4.6 KiB
C
/* 模块名称:DTU数据源接口;作者:DTU项目组。
|
|
* Single-owner application data. No sockets, hardware outputs or allocation. */
|
|
#ifndef IEC104_SOURCE_H
|
|
#define IEC104_SOURCE_H
|
|
#include "iec104_dtu_table.h"
|
|
#include "IEC104_Command.h"
|
|
#include "IEC104_RemoteParameter.h"
|
|
#include "IEC104_Parameter.h"
|
|
#include "IEC104_ClockSynchronization.h"
|
|
/* InformationObject is only a base class. The caller must retain full storage
|
|
* until Add_InformationObject has copied it; never allocate the base alone. */
|
|
typedef union {
|
|
IEC60870_InformationObject_t object;
|
|
IEC60870_SinglePointInformation_t single;
|
|
IEC60870_DoublePointInformation_t double_point;
|
|
IEC60870_MeasuredValueShort_t measurement;
|
|
IEC60870_ParameterNormalizedValue_t normalized;
|
|
IEC60870_ParameterScaledValue_t scaled;
|
|
IEC60870_ParameterFloatValue_t parameter;
|
|
IEC60870_StepPositionInformation_t step;
|
|
IEC60870_BitString32_t bits;
|
|
IEC60870_IntegratedTotalsShort_t energy;
|
|
} iec104_source_object_t;
|
|
/* All 345 visible profile entries have numeric tags 1/35/38/45 and width <=4.
|
|
* Tag4 metadata remains unconfigured and invisible, never silently truncated. */
|
|
typedef struct { uint8_t tag, length, bytes[4]; } iec104_source_value_t;
|
|
typedef struct { uint16_t id; float value; } iec104_source_change_t;
|
|
/* All callbacks run serially in the protocol owner. NULL means unavailable.
|
|
* read returns false only for unavailable input; quality is never normalized.
|
|
* apply must validate the whole list before changing anything and be atomic.
|
|
* The platform must not call per-item setters that can fail after partial writes.
|
|
* init does not initialize/reset protection/calibration or invoke apply. */
|
|
typedef struct {
|
|
void *context;
|
|
bool (*measurement)(void *, uint16_t source_addr, float *, uint8_t *quality);
|
|
bool (*signal)(void *, uint16_t source_addr, uint8_t *, uint8_t *quality);
|
|
bool (*parameter_read)(void *, uint16_t semantic_id, float *);
|
|
bool (*parameter_apply)(void *, const iec104_source_change_t *, size_t, bool validate_only);
|
|
} iec104_source_bindings_t;
|
|
typedef struct {
|
|
uint32_t simulated_actions, physical_do_actions, parameter_commits, clock_sets;
|
|
uint32_t reset_actions;
|
|
uint16_t current_area;
|
|
bool synchronized;
|
|
} iec104_source_stats_t;
|
|
/* core_start calls init exactly once: clears bindings, stages, stats, virtual
|
|
* clock and observations; restores typed profile/standard parameter defaults.
|
|
* TCP reconnect does NOT call init. RAM solidification is not persistence. */
|
|
void iec104_source_init(void);
|
|
/* Copies the vtable. Context must outlive the service. Bind only immediately
|
|
* after start and before poll, never while a command/parameter batch is active.
|
|
* Register parameter_read/apply as a pair. validate_only is side-effect free;
|
|
* failed apply MUST leave the entire real source unchanged. Persistence remains
|
|
* defaultTask-owned; this callback is not permission for direct config I/O. */
|
|
void iec104_source_bind(const iec104_source_bindings_t *bindings);
|
|
size_t iec104_source_count(void);
|
|
bool iec104_source_point(size_t index, iec104_source_object_t *out);
|
|
bool iec104_source_find(uint32_t ioa, iec104_source_object_t *out);
|
|
bool iec104_source_counter(size_t index, iec104_source_object_t *out);
|
|
const IEC104_CommandPoint_t *iec104_source_commands(uint16_t ca, size_t *count);
|
|
IEC104_CommandActionResult_t iec104_source_command(void *context, const IEC104_CommandRequest_t *request);
|
|
/* A successful execute has already changed state. Core reports success then
|
|
* publishes reads of the affected IOAs, and only then completes the command. */
|
|
/* At most three IOAs. Insufficient capacity returns zero without writing.
|
|
* Network WAIT retries publication only, never the already-executed action. */
|
|
size_t iec104_source_command_feedback(uint32_t command_ioa, uint32_t *ioas, size_t capacity);
|
|
extern const IEC104_RemoteParameterHandlers_t iec104_source_remote_handlers;
|
|
void iec104_source_parameter_config(uint16_t ca, IEC104_ParameterConfig_t *config);
|
|
IEC104_ParameterActionResult_t iec104_source_parameter_action(void *, const IEC104_ParameterRequest_t *);
|
|
bool iec104_source_remote_read(uint16_t area, uint32_t ioa, iec104_source_value_t *out);
|
|
bool iec104_source_clock_set(void *, const IEC104_ClockSynchronizationRequest_t *);
|
|
bool iec104_source_clock_read(void *, const IEC104_ClockSynchronizationReadRequest_t *, IEC60870_CP56Time2a_t *);
|
|
/* Virtual device wall clock only; mono_ms and base_ms use the same Net epoch. */
|
|
uint64_t iec104_source_clock_ms(uint64_t mono_ms);
|
|
void iec104_source_clock_seed(uint64_t utc_ms, uint64_t mono_ms);
|
|
void iec104_source_stats(iec104_source_stats_t *out);
|
|
#endif
|