Files
STM32F4-Base/test/host/bench/net/e6_soak.py
T
wandering1 685a366890 refactor(test): 把 test/host 顶层 25 个台架脚本按域收进 bench/
原来 test/host 一层混了三类东西:51 个主机侧单测模块目录、25 个台架驱动
与探针、若干专用目录。台架脚本平铺在顶层,与单测目录并列,看不出哪个是
「连板跑一次的」,也看不出加新脚本该往哪放。

现在按被验对象分域归档,单测模块目录一律不动(22 根 pre-commit 钩子逐个
点名它们,50 个运行器按固定层数推仓库根):

- bench/bench_defaults.py 台架连接默认值单一真源
- bench/ftp/ (10) FTP 功能、速率、鉴权、中止、完整性、背靠背复现
- bench/net/ (9) CH395F socket、keepalive 判死、挂机、复连压力、PASV、
  UDP 队列、链路时延对端
- bench/iec104/ (2) 主站客户端与它的离线样帧自检
- bench/wave/ (1) 录波段文件 PC 侧解码
- bench/screenlink/ (2) 屏板链路顶替与拉帧压测

顶层条目 78 -> 53。逐脚本作用、运行前置与「加新脚本往哪放」写在新建的
test/host/bench/README.md;test/host/README.md 增目录地图表,把原平铺的
网络/FTP 两节压成指针。

配套修正(移动后不修就会坏):
- 17 个脚本加上 bench/ 到 sys.path 的 bootstrap(sys.path[0] 是脚本自身
  目录,不补就 import bench_defaults 失败)
- cal/cal_write.py 本来就坏的(只插 cal/ 到自己 sys.path,import
  bench_defaults 直接 ModuleNotFoundError),补两段路径后可用
- e6_soak 与 wave_read 用 dirname 固定层数推仓库根,多两层后分别指向
  test/test 与 test/ci-artifacts(后者静默写错目录、不报错),层数已改对
- scripts/board_ui_nav.py 与 MDK-ARM 两个探针的 bench_defaults 搜索路径

清理与标注:删掉 test/host/iec104/(旧自研协议层单测退役后只剩一个零引用
的 stub 桩头);文档里对 test/host/iec104 与 iec104_serv 的引用加上「已
删除/已不存在 2026-11-18」状态词。冻结历史证据(带日期戳的台架日志)与
编号别名登记表里的旧路径按原样保留。
2026-11-18 12:46:03 +08:00

67 lines
2.6 KiB
Python

#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""E6 24h soak driver (U15 mismatch frequency, self-heal design anchor E6).
Protocol (docs/网络/网络自愈架构设计.md §4.8, anchor §5.2 E6):
24h normal operation + periodic E1 stress injection:
- every hour : relisten_stress :7003 n=10 gap=100 (UI-like churn)
- every 4th hour : full E1 (:7003 n=50 gap=0 + :21 n=50 gap=100)
Device-side confirmed hits are counted by the NET_U15_PROBE firmware and
appear in the serial log as "U15 probe: sockN rx=... hits=N" (first hit
immediately, then <=1/hour). Read the verdict from serial.log afterwards.
Usage: python e6_soak.py [--hours 24]
Exit: 0 = soak completed; nonzero = driver error (device untouched).
"""
import argparse
import os
import subprocess
import sys
import time
# 本脚本归档在 test/host/bench/net/:向上 5 级才到仓库根(多出 bench/ 与域目录两层)。
ROOT = os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(os.path.dirname(
os.path.abspath(__file__))))))
STRESS = os.path.join(ROOT, "test", "host", "bench", "net", "relisten_stress.py")
def log(msg):
print("[%s] %s" % (time.strftime("%m-%d %H:%M:%S"), msg), flush=True)
def burst(args_list, tag):
t0 = time.time()
try:
r = subprocess.run([sys.executable, STRESS] + args_list,
capture_output=True, text=True, timeout=900)
out = (r.stdout or "") + (r.stderr or "")
tail = [ln for ln in out.splitlines() if "ok=" in ln or "latency" in ln]
dt = time.time() - t0
log("%s rc=%d %.0fs %s" % (tag, r.returncode, dt, " | ".join(tail[-2:])))
except Exception as e: # driver hiccup must not abort the soak
log("%s ERROR %r" % (tag, e))
def main():
ap = argparse.ArgumentParser()
ap.add_argument("--hours", type=int, default=24)
a = ap.parse_args()
log("E6 soak start: %d h, hourly :7003x10, every-4h E1 full" % a.hours)
t_start = time.time()
for h in range(1, a.hours + 1):
# sleep first: hour boundary cadence
remain = t_start + h * 3600.0 - time.time()
if remain > 0:
time.sleep(remain)
burst(["--port", "7003", "--n", "10", "--gap-ms", "100"], "hour%02d :7003x10" % h)
if h % 4 == 0:
burst(["--port", "7003", "--n", "50", "--gap-ms", "0"], "hour%02d E1 :7003x50g0" % h)
burst(["--port", "21", "--n", "50", "--gap-ms", "100"], "hour%02d E1 :21x50g100" % h)
log("E6 soak done: %.1f h elapsed" % ((time.time() - t_start) / 3600.0))
return 0
if __name__ == "__main__":
sys.exit(main())