wandering1
4c21cff753
现象：抓自检台账基线那次 FTP 会话一结束，设备就打 `[ERR] [FTP] error reading next command`， 本次 `@test` 直接 FAIL（Forbidden 含 `[ERR]`）。查下去发现 lftpd 把**全部**异常路径一律按 error 级打，其中九处其实由外部输入决定：客户端关窗口、连上就走、PASV 后不建数据连接、 运维改 IP 触发监听重建。两条代价：① 任何人"连 21 端口一下就断开"就能把一次启动测试打成 FAIL；② 同样的动作可以**无限制造固件级 ERROR 日志**——日志面与门禁面都可被外部驱动， 工业现场过不了审。 **做法**：`private/lftpd_log.h` 新增 `lftpd_log_peer()`（info 级，带 `[FTP]` 前缀），而不是 就地改成 `DBG_INFO`——让"谁才算真故障"在读代码时一目了然，也防止后来者顺手把对端行为升回 error。降级的九处：控制通道被对端关闭（原 `error reading next command`，改为 `control channel closed by peer (ret=%d)`，措辞原先把正常收尾写成故障、误导过排查方向）、 发送 220 前对端已走、`listener rebuilt`（网络重建，原因由 accept 层自己记）、四处 `data accept failed`（PASV 后没来数据连接）、`accept timeout`。 **刻意留在 error 的**：create/bind/listen/取端口失败、写通道失败、文件打开失败、 `DOWNLOAD/UPLOAD FAILED`（对端中途退出确实让一次传输没走完 = 数据完整性事件， `../问题记录/CH395F_Trap_Records.md` 的中止家族要靠这些锚点定位）、 `data listener disarmed`（控制连接还活着而我方数据监听已不在服役 = 本侧异常，就地注明）。 **实测划清的边界**：客户端**干净收尾**（发 `QUIT` 或 FIN 半关）现在整条链路没有任何 `[ERR]`； 但 **RST 硬拆**（`SO_LINGER` 清零 / 进程被杀 / 拔线）仍会留一条 `[ERR][NET] sockN TIMEOUT`—— 那是 net 层的套接字超时锚点，网络自愈架构判据要读它，不在本次降级范围。所以"采集窗口内别跑 `data listener disarmed`（控制连接还活着而我方数据监听已不在服役 = 本侧异常，就地注明）。 **真机验证**：`@build` 0 错 0 警告；`@test --require-selftest-pass --device-ip` → **PASS** （基线 29 条 → 本次无新增；`net init: OK` 726 ms）；专门写了 RST 复现脚本（登录后 `SO_LINGER` 清零直接关）→ 串口得到 `[FTP] control channel closed by peer (ret=-1)`，**不再是 `[ERR]` 行**； 同一份日志里 QUIT 收尾的那次会话完全没有错误行。 体量：`Code` 213,236 → **213,264 B（+28）**、`RO` 18,580 → **18,652 B（+72）**（措辞变长）， 同一份日志里 QUIT 收尾的那次会话完全没有错误行。 `ZI` 131,500、`RW_IRAM1` 75,264 B 57.4% / `RW_CCM` 57,376 B 87.9% 全不变）。数字联动照做： 两份 `data/` 快照、`ram_baseline --update/--write`、`check_mem_numbers --write`、FLASH 配图 常量重算重生成（桶合计 = 231,916 与 `Code+RO` 相符；越界复查 0）、报告 §1.3/§5.1/§5.4 与 部署文档 §3.3 同步。 口径落文：新增 `docs/架构设计/STM32F4-Base存储架构说明.md` §10.3「FTP 日志级别划分：对端行为 vs 固件故障」（含两类的判据表与边界），并更新 `docs/测试说明/自动化测试流程.md` 的采集窗口警示。 顺手把 `private/lftpd_log.h` 工作区的 CRLF 混用归一回 LF（仓库里 blob 本来就是 LF，diff 无影响）。 门禁：`doc-links --all --sections-strict` 146 文档 0 问题、`id-check --strict` 增量拦截通过 （可判定 82.82%）、`mem-numbers` / `mem-budget` / `layer-deps` 全绿；改动文件字节卫生 BOM 无 / CR 0 / U+FFFD 0 / 无行尾空格。未推送。
418 lines
18 KiB
Python
418 lines
18 KiB
Python
#!/usr/bin/env python3
|
||
"""Generate memory layout SVG diagrams for STM32F4-Base.
|
||
|
||
Usage:
|
||
python tools/arch_diagram/gen_memory_svg.py [--type ram|flash|taskstack|all]
|
||
|
||
Output (default --all):
|
||
docs/images/内存布局_RAM.svg
|
||
docs/images/内存布局_FLASH.svg
|
||
docs/images/任务栈预算.svg
|
||
"""
|
||
import argparse
|
||
import os
|
||
import sys
|
||
|
||
# ---------------------------------------------------------------------------
|
||
# Diagram data
|
||
# ---------------------------------------------------------------------------
|
||
|
||
# ── RAM breakdown (2026-10-22 @build, map Grand Totals; data/ram_report_20261022.md) ──
|
||
# Region 1: main SRAM RW_IRAM1 @0x20000000 (128KB = 131,072 B, DMA-reachable)
|
||
SRAM1_TOTAL = 131072
|
||
SRAM1_USED = 75264
|
||
SRAM1_FREE = SRAM1_TOTAL - SRAM1_USED
|
||
# Region 2: CCM RW_CCM @0x10000000 —— scatter 给的是 0x0000FF00 = 65,280 B（CPU only，
|
||
# DMA 不可达）；另有 0x1000FF00 起 256 B 的 UNINIT_CCM 尾区（.noinit 崩溃现场用 48 B）
|
||
CCM_TOTAL = 65280
|
||
CCM_USED = 57376
|
||
CCM_FREE = CCM_TOTAL - CCM_USED
|
||
|
||
RAM1_CATEGORIES = [
|
||
("LVGL 池 16KB", 16876, "#4CAF50"),
|
||
("UI", 13546, "#FF9800"),
|
||
("lftpd", 8440, "#8BC34A"),
|
||
("FTL/BBT", 7036, "#9C27B0"),
|
||
("NET/CH395F", 5250, "#F44336"),
|
||
("CMSIS-RTOS", 1724, "#00BCD4"),
|
||
("HAL", 84, "#607D8B"),
|
||
("C stack", 1024, "#795548"),
|
||
("other", 21284, "#9E9E9E"),
|
||
("free", SRAM1_FREE, "#E0E0E0"),
|
||
]
|
||
RAM2_CATEGORIES = [
|
||
("FreeRTOS 堆", CCM_USED, "#2196F3"),
|
||
("free", CCM_FREE, "#E0E0E0"),
|
||
]
|
||
|
||
# ── Flash breakdown (1MB = 1,048,576 B; 2026-10-22 @build) ──────────────────
|
||
FLASH_TOTAL = 1048576
|
||
FLASH_CODE = 213264
|
||
FLASH_RO = 18652
|
||
FLASH_RW = 1188
|
||
FLASH_USED = FLASH_CODE + FLASH_RO + FLASH_RW # ROM 合计（含 RW 初始化表）
|
||
FLASH_IROM = FLASH_CODE + FLASH_RO # ER_IROM1 区用量 = 231,916 B（22.1%）
|
||
FLASH_FREE = FLASH_TOTAL - FLASH_USED
|
||
|
||
FLASH_CATEGORIES = [
|
||
("代码段 (Code)", FLASH_CODE, "#2196F3"),
|
||
("只读数据 (RO)", FLASH_RO, "#4CAF50"),
|
||
("初始化数据 (RW)", FLASH_RW, "#FF9800"),
|
||
("Flash 空闲", FLASH_FREE, "#E0E0E0"),
|
||
]
|
||
|
||
# Flash Code+RO 分布（= ER_IROM1 231,916 B；2026-10-22 按 .map 对象表逐对象归类，
|
||
# 口径同 data/ram_report_20261022.md；"其他"含链接器填充）
|
||
FLASH_CODE_SUB = [
|
||
("LVGL 库", 87706, "#4CAF50"),
|
||
("应用代码/UI", 57011, "#2196F3"),
|
||
("CH395F+FTP", 25744, "#F44336"),
|
||
("HAL 驱动", 17876, "#607D8B"),
|
||
("dhara / FTL", 10931, "#FF9800"),
|
||
("FreeRTOS 内核", 10762, "#00BCD4"),
|
||
("FatFS", 8468, "#9C27B0"),
|
||
("C 库 (microlib)", 5486, "#795548"),
|
||
("startup", 468, "#B0BEC5"),
|
||
("其他 (长尾)", 7464, "#E0E0E0"), # remainder
|
||
]
|
||
|
||
# ── Task stack budgets (2026-10-22 @build + 同日真机 [STACK] 实测; data/stack_report_20261022.md) ──
|
||
# (name, cfg, prio, worst, peak_used, margin, margin_pct, verdict, desc)
|
||
# worst = max(静态最坏深度, 实测峰值); margin = cfg - worst
|
||
# 9 行含 testTask（仅测试构建创建、无实测 → 取静态最坏链，峰位列填同值）
|
||
TASK_STACKS = [
|
||
("defaultTask", 5120, "Normal", 3024, 2152, 2096, 40, "PASS", "FatFS 挂载/探针 + 配置引擎 + syslog + LED"),
|
||
("netTask", 3840, "Normal", 1912, 1116, 1928, 50, "PASS", "CH395F 轮询、消息处理"),
|
||
("ftpTask", 4096, "Normal", 1456, 1404, 2640, 64, "PASS", "lftpd FTP 服务（大缓冲已静态化）"),
|
||
("uiTask", 16384, "BelowNormal", 4052, 4052, 12332, 75, "PASS", "LVGL UI 主循环 + 远程显示推流"),
|
||
("testTask", 8192, "BelowNormal", 736, 736, 7456, 91, "PASS", "测试套件（产品构建不创建，取静态最坏链）"),
|
||
("timeSyncTask", 2560, "Normal", 1264, 648, 1296, 50, "PASS", "TCP 时间同步（8888）"),
|
||
("adcTask", 2560, "AboveNormal", 1320, 952, 1240, 48, "PASS", "1 kHz 节拍消费者（L1 采集，纯取数）"),
|
||
("iec104Task", 2560, "Normal", 1456, 540, 1104, 43, "PASS", "IEC 60870-5-104 上行（2404）"),
|
||
("protectTask", 2048, "Normal", 872, 828, 1176, 57, "PASS", "20 ms 保护判据 + 闭锁 + 定值校验和巡检"),
|
||
]
|
||
KERNEL_STACKS = [("idle", 512), ("timer", 1024)] # 128/256 words（未实测）
|
||
|
||
HEAP_TOTAL = 57344 # configTOTAL_HEAP_SIZE 56 KB（位于 RW_CCM；段实占 57,376 B 含元数据）
|
||
HEAP_FREE = 15800 # 2026-10-22 真机 [STACK]（启动 + 网络/FTP/104 就绪后）
|
||
HEAP_MIN_EVER = 8464
|
||
TOTAL_STACKS = sum(t[1] for t in TASK_STACKS) # 47,360（含 testTask；产品构建 8 任务 = 39,168）
|
||
|
||
# ---------------------------------------------------------------------------
|
||
# SVG helpers
|
||
# ---------------------------------------------------------------------------
|
||
|
||
def _text_width(text, char_w=7.2):
|
||
"""Rough monospace text width estimate (px)."""
|
||
return len(text) * char_w
|
||
|
||
|
||
def _wrap(text, max_chars=12):
|
||
"""Wrap label to multiple <tspan> lines."""
|
||
words = text.split("\n") if "\n" in text else text.split()
|
||
lines = []
|
||
current = ""
|
||
for w in words:
|
||
test = (current + " " + w).strip() if current else w
|
||
if len(test) > max_chars and current:
|
||
lines.append(current)
|
||
current = w
|
||
else:
|
||
current = test
|
||
if current:
|
||
lines.append(current)
|
||
return lines
|
||
|
||
|
||
def svg_header(w, h):
|
||
return (
|
||
f'<svg xmlns="http://www.w3.org/2000/svg" viewBox="0 0 {w} {h}" '
|
||
f'width="{w}" height="{h}" style="font-family:Consolas,\'Courier New\',monospace; '
|
||
f'font-size:12px; background:#fff">\n'
|
||
'<defs>\n'
|
||
'<style>\n'
|
||
'.title { font-size:14px; font-weight:bold; }\n'
|
||
'.label { font-size:11px; }\n'
|
||
'.legend-text { font-size:10px; }\n'
|
||
'.bar-seg { stroke:#fff; stroke-width:0.5; }\n'
|
||
'</style>\n'
|
||
'</defs>\n'
|
||
)
|
||
|
||
|
||
def svg_footer():
|
||
return '</svg>\n'
|
||
|
||
|
||
def _draw_bar_segment(x, y, w, h, fill, label_inside, label_outside="",
|
||
label_font=10, min_inside_w=40):
|
||
"""Return SVG fragment for a bar segment with label."""
|
||
parts = []
|
||
parts.append(f' <rect class="bar-seg" x="{x}" y="{y}" width="{w:.1f}" height="{h}" '
|
||
f'fill="{fill}" rx="2"/>\n')
|
||
if w > min_inside_w and label_inside:
|
||
# Center text inside bar
|
||
lines = _wrap(label_inside, max_chars=int(w / 7))
|
||
ty = y + h / 2 - (len(lines) - 1) * 6
|
||
for line in lines:
|
||
lx = x + w / 2
|
||
parts.append(f' <text x="{lx:.1f}" y="{ty:.1f}" text-anchor="middle" '
|
||
f'dominant-baseline="central" class="label" fill="#000">{line}</text>\n')
|
||
ty += 12
|
||
elif label_outside:
|
||
lx = x + w + 4
|
||
ty = y + h / 2
|
||
parts.append(f' <text x="{lx:.1f}" y="{ty:.1f}" text-anchor="start" '
|
||
f'dominant-baseline="central" class="legend-text" fill="#333">{label_outside}</text>\n')
|
||
return "".join(parts)
|
||
|
||
|
||
# ---------------------------------------------------------------------------
|
||
# Diagram generators
|
||
# ---------------------------------------------------------------------------
|
||
|
||
def gen_ram_svg():
|
||
"""内存布局_RAM.svg — 两条堆叠条：主 SRAM（DMA 可达）+ CCM（仅 CPU）。"""
|
||
W, H = 820, 360
|
||
BAR_X, BAR_H = 60, 44
|
||
SCALE = (W - 80) / SRAM1_TOTAL # 128KB 占满宽；CCM (64KB) 占半宽
|
||
|
||
svg = svg_header(W, H)
|
||
svg += f'<text x="{W/2}" y="24" text-anchor="middle" class="title">SRAM (192KB) 使用布局 — 2026-10-22 @build</text>\n'
|
||
|
||
# Region 1: 主 SRAM
|
||
y1 = 50
|
||
svg += f'<text x="{BAR_X}" y="{y1-8}" class="label" fill="#555">主 SRAM RW_IRAM1 @0x20000000（128KB，DMA 可达）</text>\n'
|
||
x = BAR_X
|
||
for label, size, color in RAM1_CATEGORIES:
|
||
w = size * SCALE
|
||
if w < 1:
|
||
continue
|
||
inside = label if w > _text_width(label) + 10 else ""
|
||
svg += _draw_bar_segment(x, y1, w, BAR_H, color, inside, "")
|
||
x += w
|
||
svg += f'<text x="{BAR_X}" y="{y1+BAR_H+18}" class="label" fill="#333">'
|
||
svg += f'已用: {SRAM1_USED}B ({SRAM1_USED/SRAM1_TOTAL*100:.1f}%)'
|
||
svg += f' 空闲: {SRAM1_FREE}B ({SRAM1_FREE/SRAM1_TOTAL*100:.1f}%)'
|
||
svg += f' 总量: 128KB</text>\n'
|
||
|
||
# Region 2: CCM
|
||
y2 = y1 + BAR_H + 50
|
||
svg += f'<text x="{BAR_X}" y="{y2-8}" class="label" fill="#555">CCM RW_CCM @0x10000000（段 65,280 B；仅 CPU 可达、DMA 不可达 → R2/R3）</text>\n'
|
||
x = BAR_X
|
||
for label, size, color in RAM2_CATEGORIES:
|
||
w = size * SCALE
|
||
if w < 1:
|
||
continue
|
||
inside = label if w > _text_width(label) + 10 else ""
|
||
svg += _draw_bar_segment(x, y2, w, BAR_H, color, inside, "")
|
||
x += w
|
||
svg += f'<text x="{BAR_X}" y="{y2+BAR_H+18}" class="label" fill="#333">'
|
||
svg += f'已用: {CCM_USED}B ({CCM_USED/CCM_TOTAL*100:.1f}%)'
|
||
svg += f' 空闲: {CCM_FREE}B ({CCM_FREE/CCM_TOTAL*100:.1f}%)'
|
||
svg += f' 总量: 63.75KB（+256 B UNINIT_CCM 尾区）——CCM 是当前全局卡点</text>\n'
|
||
|
||
# Legend（主 SRAM 两列 + CCM 两行）
|
||
ly = y2 + BAR_H + 40
|
||
lx = 60
|
||
half = (len(RAM1_CATEGORIES) + 1) // 2
|
||
for i, (label, size, color) in enumerate(RAM1_CATEGORIES):
|
||
pct = size / SRAM1_TOTAL * 100
|
||
kb = size / 1024
|
||
if i >= half:
|
||
lx2 = 420
|
||
else:
|
||
lx2 = 60
|
||
yy = 226 + (i % half) * 16
|
||
svg += f' <rect x="{lx2}" y="{yy}" width="12" height="12" fill="{color}" rx="2"/>\n'
|
||
svg += f' <text x="{lx2+16}" y="{yy+10}" class="legend-text" fill="#333">'
|
||
svg += f'主SRAM {label}: {kb:.1f}KB ({pct:.1f}%)</text>\n'
|
||
for i, (label, size, color) in enumerate(RAM2_CATEGORIES):
|
||
pct = size / CCM_TOTAL * 100
|
||
kb = size / 1024
|
||
yy = 322 + i * 16
|
||
svg += f' <rect x="{60}" y="{yy}" width="12" height="12" fill="{color}" rx="2"/>\n'
|
||
svg += f' <text x="{76}" y="{yy+10}" class="legend-text" fill="#333">'
|
||
svg += f'CCM {label}: {kb:.1f}KB ({pct:.1f}%)</text>\n'
|
||
|
||
svg += svg_footer()
|
||
return svg
|
||
|
||
|
||
def gen_flash_svg():
|
||
"""内存布局_FLASH.svg — bar + code sub-breakdown."""
|
||
W, H = 820, 240
|
||
BAR_X, BAR_Y, BAR_H = 60, 50, 40
|
||
SCALE = (W - 80) / FLASH_TOTAL
|
||
|
||
svg = svg_header(W, H)
|
||
svg += f'<text x="{W/2}" y="24" text-anchor="middle" class="title">Flash (1MB) 使用布局 — 2026-10-22 @build</text>\n'
|
||
|
||
x = BAR_X
|
||
for label, size, color in FLASH_CATEGORIES:
|
||
w = size * SCALE
|
||
if w < 1:
|
||
continue
|
||
inside = f"{label} {size/1024:.1f}KB" if w > 60 else ""
|
||
outside = "" if w > 60 else f"{label} {size/1024:.1f}KB"
|
||
svg += _draw_bar_segment(x, BAR_Y, w, BAR_H, color, inside, outside)
|
||
x += w
|
||
|
||
# Summary below bar
|
||
svg += f'<text x="{BAR_X}" y="{BAR_Y+BAR_H+18}" class="label" fill="#333">'
|
||
svg += f'已用: {FLASH_USED/1024:.1f}KB ({FLASH_USED/FLASH_TOTAL*100:.1f}%)'
|
||
svg += f' 空闲: {FLASH_FREE/1024:.1f}KB ({FLASH_FREE/FLASH_TOTAL*100:.1f}%)'
|
||
svg += f' ER_IROM1（Code+RO）: {FLASH_IROM/1024:.1f}KB ({FLASH_IROM/FLASH_TOTAL*100:.1f}%)'
|
||
svg += f' 总量: 1MB (= ROM 合计口径)'
|
||
svg += f'</text>\n'
|
||
|
||
# Code sub-breakdown mini bar
|
||
Y2 = 130
|
||
svg += f'<text x="{BAR_X}" y="{Y2-6}" class="label" fill="#555">Code + RO 分布（ER_IROM1 {FLASH_IROM/1024:.1f}KB，按 .map 对象归类）</text>\n'
|
||
SCALE2 = (W - 80) / FLASH_IROM
|
||
x2 = BAR_X
|
||
for label, size, color in FLASH_CODE_SUB:
|
||
w = size * SCALE2
|
||
if w < 1:
|
||
continue
|
||
# 窄段（多数桶 < 40px）不放内嵌文字，统一列到下方图例，避免互相压字
|
||
inside = f"{size/1024:.1f}KB" if w > 40 else ""
|
||
svg += _draw_bar_segment(x2, Y2, w, 24, color, inside, "")
|
||
x2 += w
|
||
|
||
# 图例：四列三行（10 个桶）
|
||
for i, (label, size, color) in enumerate(FLASH_CODE_SUB):
|
||
col, row = i % 4, i // 4
|
||
lx = 60 + col * 195
|
||
ly = 176 + row * 16
|
||
svg += f' <rect x="{lx}" y="{ly-9}" width="10" height="10" fill="{color}" rx="2"/>\n'
|
||
svg += f' <text x="{lx+14}" y="{ly}" class="legend-text" fill="#333">{label} {size/1024:.1f}KB</text>\n'
|
||
|
||
svg += svg_footer()
|
||
return svg
|
||
|
||
|
||
def gen_taskstack_svg():
|
||
"""任务栈预算.svg — 每任务：分配栈条 + 最坏占用叠加条 + 实测余量/判定。"""
|
||
W, H = 880, 620 # 9 个任务 + 2 内核栈 + 堆汇总，行高 40 需要 ~600 高
|
||
BAR_X = 190
|
||
MAX_STACK = 16384
|
||
SCALE = (W - BAR_X - 40) / MAX_STACK
|
||
Y_START = 64
|
||
ROW_PITCH = 40
|
||
BAR_H = 16
|
||
|
||
svg = svg_header(W, H)
|
||
svg += f'<text x="{W/2}" y="22" text-anchor="middle" class="title">FreeRTOS 任务栈预算（9 任务；栈全部从 56KB FreeRTOS 堆分配，堆位于 CCM）</text>\n'
|
||
svg += f'<text x="{W/2}" y="40" text-anchor="middle" class="legend-text" fill="#777">数据: 2026-10-22 @build + 同日真机 [STACK] 水位（data/stack_report_20261022.md）；最坏 = max(静态最坏链, 实测峰值)；判定线 = 余量 ≥ max(1024B ISR, 配置×30%)</text>\n'
|
||
svg += f'<text x="{BAR_X}" y="{Y_START-10}" class="legend-text" fill="#555">浅色条 = 分配栈 深色条 = 最坏占用（max(静态最坏, 实测峰值)） 下方文字 = 实测余量/判定</text>\n'
|
||
|
||
y = Y_START
|
||
for name, cfg, prio, worst, peak, margin, pct, verdict, desc in TASK_STACKS:
|
||
w = cfg * SCALE
|
||
wc = worst * SCALE
|
||
# 三档优先级配色：Normal 蓝 / BelowNormal 琥珀 / AboveNormal 绿（adcTask）
|
||
dark = {"Normal": "#2196F3", "BelowNormal": "#FF9800",
|
||
"AboveNormal": "#4CAF50"}[prio]
|
||
light = {"Normal": "#BBDEFB", "BelowNormal": "#FFE0B2",
|
||
"AboveNormal": "#C8E6C9"}[prio]
|
||
vc = "#2E7D32" if verdict == "PASS" else "#C62828"
|
||
|
||
# 任务名（左侧）
|
||
svg += f' <text x="{BAR_X-4}" y="{y+8}" text-anchor="end" dominant-baseline="central" class="label" fill="#333">{name}</text>\n'
|
||
# 分配栈条（浅色）+ 最坏占用叠加条（深色）
|
||
svg += f' <rect class="bar-seg" x="{BAR_X}" y="{y}" width="{w:.1f}" height="{BAR_H}" fill="{light}" rx="3"/>\n'
|
||
svg += f' <rect x="{BAR_X}" y="{y}" width="{wc:.1f}" height="{BAR_H}" fill="{dark}" rx="3"/>\n'
|
||
# 数据行
|
||
svg += f' <text x="{BAR_X}" y="{y+BAR_H+11}" dominant-baseline="central" class="legend-text" fill="#333">'
|
||
svg += f'配置 {cfg}B | 实测峰值 {peak}B | 最坏 {worst}B | 余量 {margin}B ({pct}%) '
|
||
svg += f'<tspan fill="{vc}" font-weight="bold">{verdict}</tspan></text>\n'
|
||
y += ROW_PITCH
|
||
|
||
# 内核任务（静态小栈，未取句柄实测）
|
||
y += 4
|
||
for name, stack in KERNEL_STACKS:
|
||
w = max(stack * SCALE, 2)
|
||
svg += f' <text x="{BAR_X-4}" y="{y+6}" text-anchor="end" dominant-baseline="central" class="label" fill="#333">{name}</text>\n'
|
||
svg += f' <rect class="bar-seg" x="{BAR_X}" y="{y}" width="{w:.1f}" height="12" fill="#90A4AE" rx="2"/>\n'
|
||
svg += f' <text x="{BAR_X + w + 4}" y="{y+6}" dominant-baseline="central" class="legend-text" fill="#333">{stack}B（未实测）</text>\n'
|
||
y += 22
|
||
|
||
# 堆汇总（实测值）
|
||
y += 8
|
||
svg += f'<text x="{BAR_X}" y="{y}" class="label" fill="#555">'
|
||
svg += f'堆总量: {HEAP_TOTAL}B（configTOTAL_HEAP_SIZE=56KB，位于 RW_CCM）'
|
||
svg += f' 任务栈合计: {TOTAL_STACKS}B（含 testTask 8192B）</text>\n'
|
||
y += 16
|
||
svg += f'<text x="{BAR_X}" y="{y}" class="label" fill="#555">'
|
||
svg += f'产品构建 8 任务栈 = 39168B + 内核栈 {512+1024}B'
|
||
svg += f' 实测: free={HEAP_FREE}B / min_ever={HEAP_MIN_EVER}B（2026-10-22）</text>\n'
|
||
y += 16
|
||
svg += f'<text x="{BAR_X}" y="{y}" class="label" fill="#555">'
|
||
svg += '判定: 9/9 PASS（testTask 无实测，取静态最坏链）</text>\n'
|
||
y += 24
|
||
# 颜色图例
|
||
svg += f' <rect x="{BAR_X}" y="{y}" width="10" height="10" fill="#2196F3" rx="2"/>\n'
|
||
svg += f' <text x="{BAR_X+14}" y="{y+8}" class="legend-text" fill="#333">Normal 优先级</text>\n'
|
||
svg += f' <rect x="{BAR_X+130}" y="{y}" width="10" height="10" fill="#FF9800" rx="2"/>\n'
|
||
svg += f' <text x="{BAR_X+144}" y="{y+8}" class="legend-text" fill="#333">BelowNormal 优先级</text>\n'
|
||
svg += f' <rect x="{BAR_X+300}" y="{y}" width="10" height="10" fill="#4CAF50" rx="2"/>\n'
|
||
svg += f' <text x="{BAR_X+314}" y="{y+8}" class="legend-text" fill="#333">AboveNormal 优先级（adcTask）</text>\n'
|
||
svg += f' <rect x="{BAR_X+520}" y="{y}" width="10" height="10" fill="#90A4AE" rx="2"/>\n'
|
||
svg += f' <text x="{BAR_X+534}" y="{y+8}" class="legend-text" fill="#333">内核栈 idle/timer</text>\n'
|
||
|
||
svg += svg_footer()
|
||
return svg
|
||
|
||
|
||
# ---------------------------------------------------------------------------
|
||
# Main
|
||
# ---------------------------------------------------------------------------
|
||
|
||
def main():
|
||
parser = argparse.ArgumentParser(description="Generate memory layout SVG diagrams")
|
||
parser.add_argument("--type", choices=["ram", "flash", "taskstack", "all"], default="all")
|
||
args = parser.parse_args()
|
||
|
||
out_dir = os.path.join(os.path.dirname(os.path.dirname(os.path.dirname(os.path.abspath(__file__)))),
|
||
"docs", "images")
|
||
os.makedirs(out_dir, exist_ok=True)
|
||
|
||
generators = {
|
||
"ram": ("内存布局_RAM.svg", gen_ram_svg),
|
||
"flash": ("内存布局_FLASH.svg", gen_flash_svg),
|
||
"taskstack": ("任务栈预算.svg", gen_taskstack_svg),
|
||
}
|
||
|
||
if args.type == "all":
|
||
targets = generators.values()
|
||
else:
|
||
targets = [generators[args.type]]
|
||
|
||
for filename, gen_func in targets:
|
||
path = os.path.join(out_dir, filename)
|
||
svg = gen_func()
|
||
with open(path, "w", encoding="utf-8", newline="\n") as f:
|
||
f.write(svg)
|
||
print(f"OK: {filename} ({len(svg)} bytes)")
|
||
|
||
# XML self-check
|
||
for filename, _ in targets:
|
||
path = os.path.join(out_dir, filename)
|
||
with open(path, "r", encoding="utf-8") as f:
|
||
content = f.read()
|
||
if not content.startswith("<svg "):
|
||
print(f"FAIL: {filename} does not start with <svg", file=sys.stderr)
|
||
sys.exit(1)
|
||
if "</svg>" not in content:
|
||
print(f"FAIL: {filename} missing </svg>", file=sys.stderr)
|
||
sys.exit(1)
|
||
if 'xmlns="http://www.w3.org/2000/svg"' not in content:
|
||
print(f"FAIL: {filename} missing xmlns", file=sys.stderr)
|
||
sys.exit(1)
|
||
print("All SVG self-checks passed")
|
||
|
||
|
||
if __name__ == "__main__":
|
||
main()
|