Files
STM32F4-Base/MDK-ARM/ftp_freeze_probe.py
T
wandering1 685a366890 refactor(test): 把 test/host 顶层 25 个台架脚本按域收进 bench/
原来 test/host 一层混了三类东西:51 个主机侧单测模块目录、25 个台架驱动
与探针、若干专用目录。台架脚本平铺在顶层,与单测目录并列,看不出哪个是
「连板跑一次的」,也看不出加新脚本该往哪放。

现在按被验对象分域归档,单测模块目录一律不动(22 根 pre-commit 钩子逐个
点名它们,50 个运行器按固定层数推仓库根):

- bench/bench_defaults.py 台架连接默认值单一真源
- bench/ftp/ (10) FTP 功能、速率、鉴权、中止、完整性、背靠背复现
- bench/net/ (9) CH395F socket、keepalive 判死、挂机、复连压力、PASV、
  UDP 队列、链路时延对端
- bench/iec104/ (2) 主站客户端与它的离线样帧自检
- bench/wave/ (1) 录波段文件 PC 侧解码
- bench/screenlink/ (2) 屏板链路顶替与拉帧压测

顶层条目 78 -> 53。逐脚本作用、运行前置与「加新脚本往哪放」写在新建的
test/host/bench/README.md;test/host/README.md 增目录地图表,把原平铺的
网络/FTP 两节压成指针。

配套修正(移动后不修就会坏):
- 17 个脚本加上 bench/ 到 sys.path 的 bootstrap(sys.path[0] 是脚本自身
  目录,不补就 import bench_defaults 失败)
- cal/cal_write.py 本来就坏的(只插 cal/ 到自己 sys.path,import
  bench_defaults 直接 ModuleNotFoundError),补两段路径后可用
- e6_soak 与 wave_read 用 dirname 固定层数推仓库根,多两层后分别指向
  test/test 与 test/ci-artifacts(后者静默写错目录、不报错),层数已改对
- scripts/board_ui_nav.py 与 MDK-ARM 两个探针的 bench_defaults 搜索路径

清理与标注:删掉 test/host/iec104/(旧自研协议层单测退役后只剩一个零引用
的 stub 桩头);文档里对 test/host/iec104 与 iec104_serv 的引用加上「已
删除/已不存在 2026-11-18」状态词。冻结历史证据(带日期戳的台架日志)与
编号别名登记表里的旧路径按原样保留。
2026-11-18 12:46:03 +08:00

131 lines
5.5 KiB
Python
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
# -*- coding: utf-8 -*-
# Trustworthy TC-NET-604 freeze reproduction via the REAL production path.
#
# Why this one is trustworthy (unlike the 2026-09-22 probe batteries):
# * Production firmware, no in-firmware readers/probes -> the "a test reader ate the
# peer's bytes and the PC saw a short stream" artifact class cannot occur.
# * Judgement = the FTP client's own protocol result (STOR/RETR replies) plus an
# end-to-end SHA-256 taken from a RETR of the uploaded file (content ground truth).
# * Data-channel stall vs whole-net-layer stall is distinguished by a NOOP on the
# CONTROL channel (a different socket) while the data channel is stuck.
# * Only the device's own production logs are used for the device-side timeline
# (window them by the per-round "TS <epoch>" line printed here).
#
# Usage: ftp_freeze_probe.py [--ip <设备IP>] [--port 21] [--size 65536]
# [--rounds 10] [--gap 3] [--keep]
# Output lines (machine-auditable):
# TS <epoch>
# ROUND <n> size=<bytes> stor=<OK|FAIL:reason> t_stor=<s> retr=<OK|FAIL:reason>
# t_retr=<s> hash=<MATCH|MISMATCH|NA> [ctrl=<alive|dead|na>]
# SUMMARY rounds=<n> pass=<n> fail=<n>
# Exit: 0 all pass / 1 any failure / 2 usage or connect error.
import argparse, hashlib, io, os, random, socket, sys, time
from ftplib import FTP, error_reply, error_temp, error_perm, all_errors
# 台架连接默认值单一真源在 test/host/bench/bench_defaults.py(跨目录:补 sys.path 后 import)
_sys_path = os.path.join(os.path.dirname(os.path.abspath(__file__)),
"..", "test", "host", "bench")
if _sys_path not in sys.path:
sys.path.insert(0, _sys_path)
import bench_defaults # noqa: E402
# Device-side FTP auth: lftpd validates against /config.ini [ftp] (user / pwd_hash).
# This device has NO anonymous channel (USER anonymous -> 530), so the probe must log
# in with the factory account. Override with --user/--password if it was changed.
FTP_USER = "admin"
FTP_PASS = "admin"
def log(msg):
sys.stdout.write(msg + "\n")
sys.stdout.flush()
def liveness(ip, port, timeout=3.0):
"""Control-channel liveness on a FRESH connection (production lftpd control path)."""
try:
f = FTP()
f.connect(ip, port, timeout=timeout)
f.login(FTP_USER, FTP_PASS)
f.voidcmd("NOOP")
f.quit()
return "alive"
except Exception:
return "dead"
def main():
global FTP_USER, FTP_PASS # 两处登录点都读模块常量,命令行覆盖后即刻生效
ap = argparse.ArgumentParser()
ap.add_argument("--ip", default=bench_defaults.DEVICE_IP)
ap.add_argument("--port", type=int, default=21)
ap.add_argument("--size", type=int, default=65536)
ap.add_argument("--rounds", type=int, default=10)
ap.add_argument("--gap", type=float, default=3.0)
ap.add_argument("--keep", action="store_true", help="do not DELE the uploaded file")
ap.add_argument("--seed", type=int, default=604)
ap.add_argument("--user", default="admin",
help="FTP user (device auth; this device has no anonymous channel)")
ap.add_argument("--password", default="admin", help="FTP password (factory default)")
a = ap.parse_args()
FTP_USER, FTP_PASS = a.user, a.password
rng = random.Random(a.seed)
npass = nfail = 0
for n in range(1, a.rounds + 1):
data = bytes(rng.getrandbits(8) for _ in range(a.size))
want = hashlib.sha256(data).hexdigest()
name = "/fz%04d.bin" % n
log("TS %d" % int(time.time()))
f = FTP()
stor = retr = "NA"
t_stor = t_retr = 0.0
got_hash = "NA"
ctrl = "na"
try:
f.connect(a.ip, a.port, timeout=15.0)
f.login(FTP_USER, FTP_PASS)
t0 = time.time()
try:
f.storbinary("STOR " + name, io.BytesIO(data), blocksize=8192)
stor = "OK"
except all_errors as e:
stor = "FAIL:%s" % type(e).__name__
ctrl = liveness(a.ip, a.port)
t_stor = time.time() - t0
if stor == "OK":
buf = bytearray()
t0 = time.time()
try:
f.retrbinary("RETR " + name, buf.extend, blocksize=8192)
retr = "OK"
got_hash = "MATCH" if hashlib.sha256(bytes(buf)).hexdigest() == want else "MISMATCH"
except all_errors as e:
retr = "FAIL:%s" % type(e).__name__
ctrl = liveness(a.ip, a.port)
t_retr = time.time() - t0
if not a.keep:
try:
f.delete(name)
except all_errors:
pass
try:
f.quit()
except all_errors:
try:
f.close()
except Exception:
pass
except all_errors as e:
stor = "FAIL:connect-%s" % type(e).__name__
ctrl = liveness(a.ip, a.port)
ok = (stor == "OK" and retr == "OK" and got_hash == "MATCH")
npass += 1 if ok else 0
nfail += 0 if ok else 1
log("ROUND %d size=%d stor=%s t_stor=%.2f retr=%s t_retr=%.2f hash=%s ctrl=%s" %
(n, a.size, stor, t_stor, retr, t_retr, got_hash, ctrl))
if a.gap > 0 and n < a.rounds:
time.sleep(a.gap)
log("SUMMARY rounds=%d pass=%d fail=%d" % (a.rounds, npass, nfail))
return 0 if nfail == 0 else 1
sys.exit(main())