685a366890
原来 test/host 一层混了三类东西:51 个主机侧单测模块目录、25 个台架驱动 与探针、若干专用目录。台架脚本平铺在顶层,与单测目录并列,看不出哪个是 「连板跑一次的」,也看不出加新脚本该往哪放。 现在按被验对象分域归档,单测模块目录一律不动(22 根 pre-commit 钩子逐个 点名它们,50 个运行器按固定层数推仓库根): - bench/bench_defaults.py 台架连接默认值单一真源 - bench/ftp/ (10) FTP 功能、速率、鉴权、中止、完整性、背靠背复现 - bench/net/ (9) CH395F socket、keepalive 判死、挂机、复连压力、PASV、 UDP 队列、链路时延对端 - bench/iec104/ (2) 主站客户端与它的离线样帧自检 - bench/wave/ (1) 录波段文件 PC 侧解码 - bench/screenlink/ (2) 屏板链路顶替与拉帧压测 顶层条目 78 -> 53。逐脚本作用、运行前置与「加新脚本往哪放」写在新建的 test/host/bench/README.md;test/host/README.md 增目录地图表,把原平铺的 网络/FTP 两节压成指针。 配套修正(移动后不修就会坏): - 17 个脚本加上 bench/ 到 sys.path 的 bootstrap(sys.path[0] 是脚本自身 目录,不补就 import bench_defaults 失败) - cal/cal_write.py 本来就坏的(只插 cal/ 到自己 sys.path,import bench_defaults 直接 ModuleNotFoundError),补两段路径后可用 - e6_soak 与 wave_read 用 dirname 固定层数推仓库根,多两层后分别指向 test/test 与 test/ci-artifacts(后者静默写错目录、不报错),层数已改对 - scripts/board_ui_nav.py 与 MDK-ARM 两个探针的 bench_defaults 搜索路径 清理与标注:删掉 test/host/iec104/(旧自研协议层单测退役后只剩一个零引用 的 stub 桩头);文档里对 test/host/iec104 与 iec104_serv 的引用加上「已 删除/已不存在 2026-11-18」状态词。冻结历史证据(带日期戳的台架日志)与 编号别名登记表里的旧路径按原样保留。
169 lines
6.0 KiB
Python
169 lines
6.0 KiB
Python
# relisten 沉降段原语化受阻:芯片级复用时序台架主机端(与 test/board/ch395f_reuse_bench.c 共用变体表)
|
||
# 用法: python ch395f_reuse_host.py [--host IP] [--cycles N] [--mode legacy|e4]
|
||
# legacy: 按 idx 轮转连接 5000+idx 端口,记录收发结果与时刻。
|
||
# e4: E4 sock_reset A/B/C 矩阵配套(2026-10-13):每轮两次连接——
|
||
# ①污染:连上发 3000B 后 RST(SO_LINGER 0,TRAP-NET-18 中止形态);
|
||
# ②载荷:立即重连发 4096B 图案(pat[i]=(seed+i)&0xFF, seed=(rg*97+13)&0xFF)后 FIN。
|
||
# 端口 5100+rg,rg=0..(3*rounds-1),变体顺序 A/B/C(与固件 bench 表一致)。
|
||
import os
|
||
import argparse
|
||
import socket
|
||
import struct
|
||
import sys
|
||
import time
|
||
|
||
# 台架连接默认值单一真源已随域归档到 test/host/bench/bench_defaults.py:
|
||
# Python 的 sys.path[0] 是**脚本自身所在目录**,本脚本在 bench/<域>/ 下直接
|
||
# `import bench_defaults` 会 ModuleNotFoundError —— 先把 bench/ 补进 sys.path。
|
||
_BENCH_DIR = os.path.dirname(os.path.dirname(os.path.abspath(__file__)))
|
||
if _BENCH_DIR not in sys.path:
|
||
sys.path.insert(0, _BENCH_DIR)
|
||
|
||
import bench_defaults # noqa: E402 (台架连接默认值单一真源)
|
||
|
||
# {idx: (tx_len, close_mode)} 与固件表一致
|
||
VARS = {
|
||
0: (100, 0), # 0ms control
|
||
1: (100, 0), # 300ms control
|
||
2: (2000, 0), # 2KB control
|
||
3: (100, 0), # 0ms + ghost-wait fix
|
||
4: (100, 0), # 300ms + ghost-wait fix
|
||
5: (2000, 0), # 2KB + ghost-wait fix
|
||
}
|
||
|
||
|
||
def ts():
|
||
return time.strftime("%H:%M:%S") + ".%03d" % (int(time.time() * 1000) % 1000)
|
||
|
||
|
||
def run_round(host, idx, tx_len, close_mode):
|
||
port = 5000 + idx
|
||
# 等端口监听(芯片还没 open 时连接被拒,重试)
|
||
s = None
|
||
t0 = time.time()
|
||
while time.time() - t0 < 12.0:
|
||
try:
|
||
s = socket.create_connection((host, port), timeout=5)
|
||
break
|
||
except OSError:
|
||
time.sleep(0.2)
|
||
if s is None:
|
||
print("%s r%u CONNECT timeout" % (ts(), idx))
|
||
return False
|
||
|
||
ok = True
|
||
try:
|
||
s.settimeout(5)
|
||
got = 0
|
||
while got < tx_len:
|
||
chunk = s.recv(min(1024, tx_len - got))
|
||
if not chunk:
|
||
break
|
||
got += len(chunk)
|
||
note = ""
|
||
if got != tx_len:
|
||
note = " <<<< SWALLOWED (want %d)" % tx_len
|
||
ok = False
|
||
if close_mode == 1:
|
||
# 等芯片 FIN(mode1 芯片先关)
|
||
try:
|
||
fin = s.recv(1)
|
||
if fin:
|
||
note += " unexpected data after tx: %r" % fin
|
||
except socket.timeout:
|
||
note += " <<<< no FIN from chip (mode1)"
|
||
ok = False
|
||
print("%s r%u connected got=%d/%d%s" % (ts(), idx, got, tx_len, note))
|
||
except socket.timeout:
|
||
print("%s r%u recv timeout <<<< STALL" % (ts(), idx))
|
||
ok = False
|
||
except OSError as e:
|
||
print("%s r%u sock error %r" % (ts(), idx, e))
|
||
ok = False
|
||
finally:
|
||
s.close() # 主机关闭(mode0/2 主机先关)
|
||
return ok
|
||
|
||
|
||
def connect_retry(host, port, budget_s):
|
||
"""connect with retry until budget_s elapses; None on give-up"""
|
||
t0 = time.time()
|
||
while time.time() - t0 < budget_s:
|
||
try:
|
||
return socket.create_connection((host, port), timeout=5)
|
||
except OSError:
|
||
time.sleep(0.2)
|
||
return None
|
||
|
||
|
||
def e4_round(host, rg, rounds_per_variant, first_budget):
|
||
"""one E4 round: contaminate (send 3000B then RST) + payload (4096B pattern then FIN)"""
|
||
port = 5100 + rg
|
||
seed = (rg * 97 + 13) & 0xFF
|
||
budget = first_budget if rg == 0 else 30
|
||
s = connect_retry(host, port, budget)
|
||
if s is None:
|
||
print("%s E4 r%2d port%5d <<<< contam CONNECT timeout" % (ts(), rg, port))
|
||
return False
|
||
try:
|
||
s.sendall(b"\x33" * 3000)
|
||
except OSError as e:
|
||
print("%s E4 r%2d contam send err %r" % (ts(), rg, e))
|
||
try:
|
||
s.setsockopt(socket.SOL_SOCKET, socket.SO_LINGER, struct.pack("ii", 1, 0))
|
||
except OSError:
|
||
pass
|
||
s.close() # RST: abort mid-session like ftp_abort_probe (TRAP-NET-18 form)
|
||
time.sleep(0.05)
|
||
|
||
s = connect_retry(host, port, 20)
|
||
if s is None:
|
||
print("%s E4 r%2d port%5d <<<< payload CONNECT timeout" % (ts(), rg, port))
|
||
return False
|
||
payload = bytes(((seed + i) & 0xFF) for i in range(4096))
|
||
try:
|
||
s.sendall(payload)
|
||
except OSError as e:
|
||
print("%s E4 r%2d payload send err %r" % (ts(), rg, e))
|
||
s.close()
|
||
return False
|
||
s.close() # FIN: full payload delivered, chip drains
|
||
print("%s E4 r%2d var=%s port%5d contam+payload sent (seed=%02X)"
|
||
% (ts(), rg, "ABC"[rg // rounds_per_variant], port, seed))
|
||
return True
|
||
|
||
|
||
def main():
|
||
ap = argparse.ArgumentParser()
|
||
ap.add_argument("--host", default=bench_defaults.DEVICE_IP)
|
||
ap.add_argument("--cycles", type=int, default=3)
|
||
ap.add_argument("--mode", choices=["legacy", "e4"], default="legacy")
|
||
ap.add_argument("--rounds", type=int, default=10, help="e4: rounds per variant")
|
||
ap.add_argument("--first-budget", type=int, default=300,
|
||
help="e4: connect budget for the first round (bench runs E2/E3 first)")
|
||
args = ap.parse_args()
|
||
|
||
if args.mode == "e4":
|
||
fails = []
|
||
total = 3 * args.rounds
|
||
for rg in range(total):
|
||
if not e4_round(args.host, rg, args.rounds, args.first_budget):
|
||
fails.append(rg)
|
||
print("E4 RESULT: %d/%d host-side ok, failures %s" % (total - len(fails), total, fails))
|
||
return 1 if fails else 0
|
||
|
||
fails = []
|
||
for c in range(args.cycles):
|
||
for idx in sorted(VARS):
|
||
tx_len, mode = VARS[idx]
|
||
print("%s === cycle%u r%u (tx=%d mode=%d) ===" % (ts(), c, idx, tx_len, mode))
|
||
if not run_round(args.host, idx, tx_len, mode):
|
||
fails.append((c, idx))
|
||
time.sleep(0.3)
|
||
print("RESULT: %d failures %s" % (len(fails), fails))
|
||
return 1 if fails else 0
|
||
|
||
|
||
if __name__ == "__main__":
|
||
sys.exit(main())
|