STM32F4-Base/scripts/id_registry.json

{
  "schema": 1,
  "generated_from": "docs/编号规范.md §4 编号空间总表（§4.1 在册 / §4.2 目标 / §4.3 冻结 / §4.4 划界）+ §6 模块码表 + §7 迁移映射。游标取「规范记载值」与「全库实测最大号」的较大者，实测偏差一律写进 cursor_note，不凭印象编。",
  "decidable_ratio_baseline": 82.6,
  "spec_docs": [
    "docs/编号规范.md"
  ],
  "bare_check_letters": [
    "S",
    "T",
    "N",
    "W",
    "E",
    "M",
    "B",
    "C",
    "D",
    "U",
    "A",
    "O",
    "G",
    "V",
    "R",
    "P"
  ],
  "bare_forbidden": {
    "S": "登记簿 S-x（§4.1，§7.1 并入 N 族）：连字符形才是规范形态",
    "T": "登记簿 T-x（§4.1，§7.1 并入 N 族）：连字符形才是规范形态",
    "N": "登记簿 N-x（§4.1 在册保留）：连字符形才是规范形态"
  },
  "excluded_paths": [
    "Lib/",
    "Middlewares/",
    "Drivers/CMSIS/",
    "Drivers/STM32F4xx_HAL_Driver/",
    "docs/芯片手册/",
    "docs/内存管理/data/",
    "docs/images/",
    "MDK-ARM/RTE/",
    "simulator/SDL2/",
    "simulator/build/",
    "simulator/tests/ref/",
    ".venv/",
    ".git/",
    "__pycache__/",
    ".workbuddy-ai/",
    ".vscode/",
    ".gitignore",
    ".gitattributes",
    ".editorconfig",
    "requirements.txt",
    "ci-artifacts/",
    "test/board/third_party/",
    "scripts/id_registry.json",
    "scripts/id_aliases.json",
    "scripts/check_ids.py",
    ".dsh/skills/*/scripts/state/",
    ".dsh/n31_neg_inject_gen217.log",
    ".dsh/n31_neg_inject_gen221_form5.log",
    "scripts/id_known_backlog.json",
    "scripts/rename_maps/"
  ],
  "excluded_suffixes": [
    ".svg",
    ".png",
    ".jpg",
    ".jpeg",
    ".gif",
    ".bin",
    ".map",
    ".htm",
    ".html",
    ".tsv",
    ".log",
    ".o",
    ".axf",
    ".hex",
    ".ico",
    ".ttf",
    ".woff",
    ".pyc",
    ".sct",
    ".lin",
    ".s",
    ".bat",
    ".ps1"
  ],
  "noise_literals": [
    "^UTF-[0-9]+$",
    "^RS-[0-9]+$",
    "^SHA-[0-9]+$",
    "^MD5-[0-9]+$",
    "^AES-[0-9]+$",
    "^CRC-[0-9]+$",
    "^SOIC-[0-9A-Z]+$",
    "^SOP-[0-9A-Z]+$",
    "^TSSOP-[0-9A-Z]+$",
    "^MSOP-[0-9A-Z]+$",
    "^QFN-[0-9A-Z]+$",
    "^LQFP-[0-9A-Z]+$",
    "^TQFP-[0-9A-Z]+$",
    "^SOT-[0-9A-Z]+$",
    "^WSON-[0-9A-Z]+$",
    "^DIP-[0-9A-Z]+$",
    "^SMD-[0-9A-Z]+$",
    "^MAX-[0-9]+$",
    "^MIN-[0-9]+$",
    "^LEN-[0-9]+$",
    "^SIZE-[0-9]+$",
    "^DMA-[0-9]+$",
    "^IRQ-[0-9]+$",
    "^GPIO-[0-9]+$",
    "^USART-[0-9]+$",
    "^UART-[0-9]+$",
    "^SPI-[0-9]+$",
    "^I2C-[0-9]+$",
    "^CAN-[0-9]+$",
    "^DBG-[0-9]+$",
    "^ERR-[0-9]+$",
    "^TCP-[0-9]+$",
    "^UDP-[0-9]+$",
    "^IP-[0-9]+$",
    "^PC-[0-9]+$",
    "^ST-[0-9]+$",
    "^ADC-[0-9]+$",
    "^PWM-[0-9]+$",
    "^DAC-[0-9]+$",
    "^R[0-9]+-[0-9]+$",
    "^L[0-9]{1,4}-[0-9]{1,4}$",
    "^SDL[0-9]-[0-9]",
    "^XH-[0-9A-Z]+$",
    "^Y[0-9]-[0-9]+$",
    "^A-Z0-9$",
    "^X-[0-9]+$",
    "^V[0-9A-Z]{2,}-[0-9]+$"
  ],
  "malformed": [
    {
      "name": "空格形 Trap",
      "pattern": "\\b[Tt][Rr][Aa][Pp] ?[0-9]{1,2}\\b",
      "severity": "error",
      "why": "空格形陷阱编号（§2 P-4 禁止），须写 TRAP-<MOD>-<nn>（§4.2 / §7.1）"
    },
    {
      "name": "中文形 陷阱",
      "pattern": "陷阱 ?[0-9]{1,2}",
      "severity": "error",
      "why": "中文形陷阱编号（§2 P-4 禁止），须写 TRAP-<MOD>-<nn>（§4.2 / §7.1）"
    },
    {
      "name": "小写 gen 代次",
      "pattern": "\\bgen[ -]?[0-9]{2,3}\\b",
      "severity": "error",
      "why": "台架代次字面不统一（§7.1），须写 GEN-<nnn>（§4.2）"
    },
    {
      "name": "小写 round 轮次",
      "pattern": "\\bround ?[0-9]{1,2}\\b",
      "severity": "error",
      "docs_only": true,
      "why": "台架轮次字面（§7.1），须写 RUN-<yyyymmdd>-<n>（§4.2）；代码里的 round 变量名不受检"
    },
    {
      "name": "会话临时号 Task #N",
      "pattern": "\\bTask ?#[0-9]+\\b",
      "severity": "error",
      "why": "会话临时号禁止入册（§4.3），改写为可解析引用或就地展开成事实描述（§7.2）"
    }
  ],
  "blind_spots": [
    "裸形同字母多义（§1.2：P1 五义 / L1 四义 / U1 四义 / D7 三义 / O4 四义）：裸形只在**属主登记处文档内**判悬空与游标，文档外降为告警——机械全库判定必然一边倒误报，收口属 §9 阶段 1-② 的 L0~L3→T0~T3 与 WI 迁移批次。",
    "圈号编号（①②③…）：与正常列举无法机械区分，不入判定；§7.1 的 RC-01~05 迁移批次落地后再收。",
    "TC 用例的「文档侧/代码侧」双向一一对应由 check_test_traceability.py 判（本门禁只判形态与定义存在性），两脚本同挂 id-check 钩子。"
  ],
  "families": [
    {
      "name": "FR",
      "class": "FR",
      "title": "功能需求（§4.1 在册保留）",
      "pattern": "\\bFR-[A-Z0-9]{1,6}-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/产品需求/产品需求设计文档.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": false,
      "cursor_note": "各域独立递增（§4.1）；实测现存 FR-<域>-1..5（未补零），规范 §4.1 写的是 \\d{2} 与现状不符 → 按现状收录，补零属 §9 阶段 1 未落地项",
      "dangling_note": "需求正文以散文描述、未逐条建定义行 → 悬空校验待 §4.1 需求表补号后启用"
    },
    {
      "name": "NFR",
      "class": "NFR",
      "title": "非功能需求（§4.1 新建，现 §7 全是散文无号）",
      "pattern": "\\bNFR-[A-Z0-9]{1,6}-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/产品需求/产品需求设计文档.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "cursor_note": "从 NFR-<域>-01 起（§4.1）",
      "check_dangling": false
    },
    {
      "name": "N",
      "class": "N",
      "title": "登记簿条目（§4.1 在册保留；S-x/T-x 按 §7.1 并入本族）",
      "pattern": "\\bN-[0-9]{1,3}[a-z]?\\b",
      "owner_docs": [
        "docs/任务规划/登记簿.md",
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "N-34",
      "check_dangling": true,
      "cursor_note": "规范 §4.1 记游标 N-34；实测登记簿现存至 N-30（N-31 曾于 2026-10-14 被复用撞号，见 docs/任务规划/README.md §0）→ 新条目一律改语义标识（P-8），实需编号才取 N-34",
      "adjacent_cues": [
        "登记簿"
      ]
    },
    {
      "name": "S-LDG",
      "class": "N",
      "title": "登记簿 存储/日志管线 条目（§7.1 续号并入 N，存量冻结）",
      "pattern": "\\bS-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/任务规划/登记簿.md",
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "S-5",
      "check_dangling": true,
      "cursor_note": "现存 S-3/S-4/S-5；§7.1 之后不再新增 S 号",
      "adjacent_cues": [
        "登记簿"
      ]
    },
    {
      "name": "T-LDG",
      "class": "N",
      "title": "登记簿 测试与工具链 条目（§7.1 续号并入 N，存量冻结）",
      "pattern": "\\bT-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/任务规划/登记簿.md",
        "docs/任务规划/测试与架构专项.md",
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "T-7",
      "check_dangling": true,
      "cursor_note": "现存 T-7（复审 T-1~T-5 见 docs/任务规划/测试与架构专项.md 卷首）",
      "adjacent_cues": [
        "登记簿",
        "专项"
      ]
    },
    {
      "name": "E-AUD",
      "class": "E-AUD",
      "title": "错误码传播审计发现（§4.1 / §4.3 冻结于 E-63）",
      "pattern": "\\bE-[0-9]{1,2}\\b",
      "owner_docs": [],
      "owner_note": "属主文档 docs/问题记录/错误码传播审计.md 已于 2026-10-15 删除 → 无法判定义存在与否，属主登记处不存在 = 不可判定",
      "scope": "global",
      "frozen": true,
      "cursor": "E-63",
      "check_dangling": false,
      "cursor_note": "禁止新增（§4.3）；新发现一律语义标识（§3.3）",
      "dangling_note": "§4.3「引用照旧」：门禁只拦游标之外的新号"
    },
    {
      "name": "E-EXP",
      "class": "E-EXP",
      "title": "网络自愈台架实验编号（§4.1 已封闭，无连字符）",
      "pattern": "\\bE[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "E19",
      "cursor_owner_only": true,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "cursor_note": "规范 §4.1 记「已封闭 E0~E15」，实测 网络自愈架构设计.md §5.2 实验表已到 E19 → 游标按实测 E19 收录，封闭线待规范修订",
      "adjacent_cues": [
        "自愈",
        "实验"
      ]
    },
    {
      "name": "I-ORPHAN",
      "class": "I",
      "title": "孤儿编号 I-1/I-2（§7.2：属主已并入 网络自愈架构设计.md §9.3）",
      "pattern": "\\bI-[12]\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "malformed": "§7.2 孤儿编号：原属主《网络Socket监听生命周期设计说明》已并入 docs/网络/网络自愈架构设计.md §9.3，不再补编号定义行 → 就地展开成事实描述",
      "note": "登记为族是为了让校验 1 不重复报它（它已由 §7.2 定性），同时保留形态整改提示"
    },
    {
      "name": "WI",
      "class": "WI",
      "title": "工作项 / 任务卡（§4.2 规划类 → 语义标识；本族是迁入目标）",
      "pattern": "\\bWI-[0-9]{1,3}\\b",
      "owner_docs": [],
      "owner_note": "§3.3 / P-8：规划类新条目改语义标识 → 属主登记处 = docs/任务规划/ 各文件的语义短语，不建号表",
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "登记为族只为让规范里出现的 WI-001 等迁入目标形态可判定，并拒绝「新增 WI 号」的误用"
    },
    {
      "name": "DR",
      "class": "DR",
      "title": "决策记录（§4.2 规划类 → 语义标识；§7.1 D1~D10 → DR-001~010）",
      "pattern": "\\bDR-[0-9]{1,3}\\b",
      "owner_docs": [],
      "owner_note": "[计划] docs/架构设计/决策记录登记簿.md 未创建，且 P-8 已把决策类改判语义标识",
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false
    },
    {
      "name": "OQ",
      "class": "OQ",
      "title": "待确认 / 开放问题（§4.2 规划类 → 语义标识）",
      "pattern": "\\bOQ-[0-9]{1,3}\\b",
      "owner_docs": [
        "docs/任务规划/基线与待确认.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false
    },
    {
      "name": "MS-TGT",
      "class": "M",
      "title": "里程碑目标形态 MS-<nn>（§4.2；存量 M1~M3）",
      "pattern": "\\bMS-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/任务规划/W1-采集保护收尾.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": true,
      "dangling_note": "§4.2 游标 MS-01；M1~M3 迁 MS-01~03 属 §7.1 未落地批次"
    },
    {
      "name": "TRAP-NOMOD",
      "class": "TRAP",
      "title": "陷阱记录（无模块码形态，§7.1 待补模块码）",
      "pattern": "\\bTRAP-[0-9]{2}\\b",
      "owner_docs_glob": [
        "docs/问题记录/*_Trap_Records.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "malformed": "缺模块码：须写 TRAP-<MOD>-<nn>（§4.2 / §6；§7.1「数字不变，补模块码」）"
    },
    {
      "name": "TC",
      "class": "TC",
      "title": "测试用例（§4.1 在册保留，机器解析族）",
      "pattern": "\\bTC-[A-Z][A-Z0-9]{0,9}-[0-9]{2,4}[a-z]?\\b",
      "owner_docs_glob": [
        "docs/测试说明/*_Test_Guide.md",
        "docs/测试说明/*单元测试说明.md",
        "docs/测试说明/实机测试实施指南.md",
        "docs/测试说明/链路延迟测试说明.md",
        "docs/测试说明/自动化测试流程.md",
        "docs/测试说明/存储维护与容量恢复.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "digit_width": [
        2,
        4
      ],
      "check_dangling": true,
      "cursor_note": "§4.1 写的模块码正则是 [A-Z]{1,4}，实测 GD5F/I104 含数字 → 正则放宽为 [A-Z][A-Z0-9]{0,4}（单一真源在此，规范行待同步）；序号 3 位起是 §4.1 目标，现存 2 位形态属 §7.2 孤儿待处置 → digit_width 暂收 2 位，§9 阶段 1-① 收紧到 3",
      "adjacent_cues": [
        "测试",
        "用例",
        "指南",
        "说明"
      ],
      "module_code_note": "2026-10-20 批 2 模块码单词化后码长可达 9 位（ADCHEALTH/WATCHDOG），{0,4} 放宽到 {0,9}；不放宽会让改名后的号整批从门禁眼里消失（实测漏 950 处）",
      "subitem_ok": true
    },
    {
      "name": "TC-UPPER",
      "class": "TC",
      "title": "测试用例（大写后缀形态，§7.1 待统一小写）",
      "pattern": "\\bTC-[A-Z][A-Z0-9]{0,9}-[0-9]{2,4}[A-Z](?![A-Za-z])\\b",
      "owner_docs_glob": [
        "docs/测试说明/*.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "malformed": "大写后缀非法：§4.1 规定后缀只允许 -<小写字母>（§7.1 统一为小写）",
      "module_code_note": "2026-10-20 批 2 模块码单词化后码长可达 9 位（ADCHEALTH/WATCHDOG），{0,4} 放宽到 {0,9}；不放宽会让改名后的号整批从门禁眼里消失（实测漏 950 处）",
      "subitem_ok": true
    },
    {
      "name": "TC-NOMOD",
      "class": "TC",
      "title": "测试用例（无模块码形态，§7.2 孤儿：缺文档 = 追溯断链）",
      "pattern": "\\bTC-[0-9]{2,4}[a-z]?\\b",
      "owner_docs_glob": [
        "docs/测试说明/*_Test_Guide.md",
        "docs/测试说明/*单元测试说明.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "malformed": "缺模块码：须写 TC-<MOD>-<nnn>（§4.1 / §6 模块码表；§7.2 列为孤儿待补文档）",
      "subitem_ok": true
    },
    {
      "name": "TM",
      "class": "TM",
      "title": "测试阶段（§4.1 在册保留，模块码取 §6）",
      "pattern": "\\bTM-[A-Z][A-Z0-9]{0,9}-[0-9]{2}\\b",
      "owner_docs_glob": [
        "docs/测试说明/*.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "digit_width": [
        2,
        2
      ],
      "check_dangling": true,
      "cursor_note": "TM-PHY-* 属 §6 废止模块码（PHY → NET，别名见 id_aliases.json），历史文档不回改",
      "adjacent_cues": [
        "测试"
      ]
    },
    {
      "name": "DP",
      "class": "DP",
      "title": "测试设计原则（§4.1 目标形态带模块码）",
      "pattern": "\\bDP-[A-Z][A-Z0-9]{0,9}-[0-9]{2}\\b",
      "owner_docs_glob": [
        "docs/测试说明/*.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "digit_width": [
        2,
        2
      ],
      "check_dangling": true,
      "adjacent_cues": [
        "测试",
        "原则"
      ]
    },
    {
      "name": "DP-LEGACY",
      "class": "DP",
      "title": "测试设计原则（无模块码存量，§7.1 待加模块码）",
      "pattern": "\\bDP-[0-9]{2}\\b",
      "owner_docs_glob": [
        "docs/测试说明/*.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "DP-04",
      "digit_width": [
        2,
        2
      ],
      "check_dangling": false,
      "cursor_note": "现存 DP-01~04（CH395F_Test_Guide.md）；§7.1 迁 DP-NET-01~04，历史文档不回改",
      "malformed": "缺模块码：§4.1 要求 DP-<MOD>-<nn>（现 DP-01 跨文档会撞）"
    },
    {
      "name": "TRAP",
      "class": "TRAP",
      "title": "陷阱记录（§4.2 保留原号，历史证词高频锚点）",
      "pattern": "\\bTRAP-[A-Z][A-Z0-9]{0,9}-[0-9]{2}\\b",
      "owner_docs_glob": [
        "docs/问题记录/*_Trap_Records.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "digit_width": [
        2,
        2
      ],
      "check_dangling": true,
      "cursor_note": "分模块各自递增：NET 01~21（属主 docs/问题记录/CH395F_Trap_Records.md）、GD5F 01~07（GD5F2GQ5UE_Trap_Records.md）、RTC 01（SD2506_Trap_Records.md）。批 4（2026-10-21）已把空格形 `Trap NN` 与中文形 `陷阱 N` 统一成 `TRAP-<MOD>-<nn>`，数字不变、只补模块码（§7.1）。**已知盲区（登记而非静默放过）**：docs/硬件平台/V0.0_网表详细分析报告.md（5 处）与 V0.1_网表详细分析报告.md（1 处）里的 `Trap05` 语义确指 `TRAP-NET-05`（CH395F 与 RTL8305 自动协商不兼容）已于批 7 统一为 TRAP-NET-05（6 处，改名工具已解除对本目录的排除）；本目录**仍不在门禁扫描语料内**：粗测有约 4200 处 R/C/D/J/X/U/T 位号，位号类型识别做完前纳入会让 --strict 天天为位号拦提交，那等于把闸门变成噪音源。",
      "adjacent_cues": [
        "Trap",
        "trap",
        "陷阱",
        "Trap_Records"
      ]
    },
    {
      "name": "FEAT",
      "class": "FEAT",
      "title": "网络层功能/驱动改进项 F-<MOD>-<nn>（§4 总表缺这一族）",
      "pattern": "\\bF-[A-Z][A-Z0-9]{0,9}-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": true,
      "cursor_note": "实测 F-NET-2~F-NET-17 / F-DRV-* 定义在 docs/网络/网络自愈架构设计.md 的功能对照表并被大量代码注释引用，但 §4.1/§4.2 总表里没有这一族 → 门禁先按实测收编，规范 §4 补行随本批同步提（§5.1 第 1 步：表里没有的类别先改规范）",
      "adjacent_cues": [
        "自愈",
        "功能",
        "改进"
      ]
    },
    {
      "name": "PRINCIPLE",
      "class": "PRINCIPLE",
      "title": "编号设计原则 P-1~P-8（§2，定义就在 docs/编号规范.md）",
      "pattern": "\\bP-[0-9]\\b",
      "owner_docs": [
        "docs/编号规范.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "P-8",
      "check_dangling": true,
      "cursor_note": "八条设计原则（§2，2026-10-15 加 P-8）；⚠ 与档位词 P0~P3（§4.4）与审计条目 P0-x（P-AUDIT）不同形，靠连字符区分",
      "adjacent_cues": [
        "原则",
        "§2"
      ]
    },
    {
      "name": "PAT",
      "class": "PAT",
      "title": "缺陷模式九类（§4.2.1，定义就在 docs/编号规范.md）",
      "pattern": "\\bPAT-[0-9]{2}\\b",
      "owner_docs": [
        "docs/编号规范.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "PAT-09",
      "digit_width": [
        2,
        2
      ],
      "check_dangling": true,
      "cursor_note": "封闭九类（§4.2.1）；新增类别先改规范"
    },
    {
      "name": "RC",
      "class": "RC",
      "title": "net 周期对账类型（§4.2，唯一被代码逻辑引用的圈号链）",
      "pattern": "\\bRC-[0-9]{2}\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "RC-05",
      "digit_width": [
        2,
        2
      ],
      "check_dangling": true,
      "cursor_note": "RC-01~RC-05（§4.2）",
      "adjacent_cues": [
        "对账"
      ]
    },
    {
      "name": "GEN",
      "class": "GEN",
      "title": "台架日志代次（§4.2 目标形态，数字不变仅改字面）",
      "pattern": "\\bGEN-[0-9]{1,3}\\b",
      "owner_docs": [
        "docs/测试说明/串口助手设计说明.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "代次是运行时计数、不落登记表 → 无定义行可查；小写 gen 形态由 malformed 拦（§4.4 划界：与 net_get_generation() 是两回事）"
    },
    {
      "name": "RUN",
      "class": "RUN",
      "title": "台架轮次（§4.2 目标形态，日期制）",
      "pattern": "\\bRUN-[0-9]{8}-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": false
    },
    {
      "name": "WAVE",
      "class": "W",
      "title": "波次（§4.1 在册保留；裸形 W<n> 合法）",
      "pattern": "\\bW[0-9]+\\b",
      "owner_docs": [
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "W8",
      "cursor_owner_only": true,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "allow_missing_defs": [
        "W8",
        "W0"
      ],
      "cursor_note": "游标 W8（§4.1）；W2 已清空销项但槽位保留不复用（README §2.0 注）",
      "adjacent_cues": [
        "波次",
        "规划"
      ]
    },
    {
      "name": "WAVE-TASK",
      "class": "W",
      "title": "波次子任务卡 W<n>-<m>（§4.1 已废止，并入 WI / 语义标识）",
      "pattern": "\\bW[0-9]+-[0-9]+\\b",
      "owner_docs": [
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "malformed": "子任务卡 W<n>-<m> 形态已废止（§4.1「子任务卡不再用 W1-0 形态，并入 WI」）→ 改语义标识（§3.3）"
    },
    {
      "name": "L-PROT",
      "class": "L",
      "title": "采集与保护分层条目（§4.1 在册保留，代码侧样板族）",
      "pattern": "\\bL[0-9](?:\\.[0-9])?-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/算法/继电保护功能复现规划.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": true,
      "cursor_note": "L 前缀专属本族 + 裸形 L<n>（§4.1）；裸形 L0/L0.5/L1/L2/L3 同时被测试分层/UI 四层/CubeMX 三层使用（§1.2「L1 四义」）→ 裸形不入判定，见 unmanaged_bare",
      "adjacent_cues": [
        "规划",
        "保护",
        "分层"
      ]
    },
    {
      "name": "B-WAVE",
      "class": "B",
      "title": "功能主线排期条目 B0~B10（§4.2 目标 → WI；存量冻结）",
      "pattern": "\\bB[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/任务规划/README.md",
        "docs/任务规划/W1-采集保护收尾.md",
        "docs/任务规划/排期详述.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "B10",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_outside_owner": "warn",
      "allow_missing_defs": [
        "B0"
      ],
      "cursor_note": "§7.1 → WI-001…（阶段 1-② 未落地）；与位号 B1/B7、审计快照 B1~B10 同形 → 文档外只告警",
      "adjacent_cues": [
        "主线",
        "波次"
      ],
      "dangling_note": "与元器件位号同形（§4.4），全库悬空判定误报面大 → 只在属主登记处文档内拦越游标（cursor_owner_only）"
    },
    {
      "name": "C-WAVE",
      "class": "C",
      "title": "结构债排期条目 C1~C6（§4.2 目标 → WI；存量冻结）",
      "pattern": "\\bC[1-9]\\b",
      "owner_docs": [
        "docs/任务规划/README.md",
        "docs/任务规划/排期详述.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "C6",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_outside_owner": "warn",
      "cursor_note": "与元器件位号 C1~Cn、UI 约束清单 C5~C9 同形（§4.4）→ 只在属主登记处文档内判定",
      "adjacent_cues": [
        "结构债",
        "波次"
      ],
      "dangling_note": "与元器件位号同形（§4.4），全库悬空判定误报面大 → 只在属主登记处文档内拦越游标（cursor_owner_only）"
    },
    {
      "name": "D-WAVE",
      "class": "D",
      "title": "验证窗口排期条目 D2~D7（§4.2 目标 → WI；存量冻结）",
      "pattern": "\\bD[1-9]\\b",
      "owner_docs": [
        "docs/任务规划/README.md",
        "docs/任务规划/排期详述.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "D7",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_outside_owner": "warn",
      "cursor_note": "与位号 D7、设计决策 D1~D10、报告自有 D-x 四方同形（§1.2「D7=验证窗口、D-7=文档门禁、D1~D7=设计决策」）→ 只在属主登记处文档内判定",
      "adjacent_cues": [
        "验证",
        "窗口"
      ],
      "dangling_note": "与元器件位号同形（§4.4），全库悬空判定误报面大 → 只在属主登记处文档内拦越游标（cursor_owner_only）"
    },
    {
      "name": "MS",
      "class": "M",
      "title": "里程碑 M1~M3（§4.2 目标 MS-<nn>；存量冻结）",
      "pattern": "\\bM[1-3]\\b",
      "owner_docs": [
        "docs/任务规划/W1-采集保护收尾.md",
        "docs/任务规划/README.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "M3",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_outside_owner": "warn",
      "cursor_note": "M1~M3（§7.1 → MS-01~03）；正则只收 M1~M3——M4 是 Cortex-M4 内核名，不是里程碑",
      "dangling_note": "与元器件位号同形（§4.4），全库悬空判定误报面大 → 只在属主登记处文档内拦越游标（cursor_owner_only）"
    },
    {
      "name": "DEF",
      "class": "DEF",
      "title": "缺陷 / 问题发现（§4.2 目标形态 DEF-<nnn>）",
      "pattern": "\\bDEF-[0-9]{1,3}\\b",
      "owner_docs": [],
      "owner_note": "[计划] docs/问题记录/缺陷登记簿.md 尚未创建 → 属主登记处不存在 = 不可判定",
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "属主登记处创建后启用（§9 阶段 1-③）"
    },
    {
      "name": "GAP",
      "class": "GAP",
      "title": "模拟器差距（§4.2；§7.1 收编 H-x / L-x / 差距 N-x）",
      "pattern": "\\bGAP-[0-9]{1,3}\\b",
      "owner_docs": [
        "docs/测试说明/模拟器差距清单.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": "GAP-17",
      "check_dangling": true,
      "adjacent_required": true,
      "cursor_note": "GAP-01~GAP-17（§7.1 按文档内出现顺序）",
      "adjacent_cues": [
        "差距"
      ]
    },
    {
      "name": "SC",
      "class": "SC",
      "title": "实机验证场景（§4.2；§7.1 收编实机预检 A1~A8、看门狗 V2/V4/V5）",
      "pattern": "\\bSC-[0-9]{1,3}\\b",
      "owner_docs": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": null,
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "实机",
        "场景"
      ]
    },
    {
      "name": "RSK",
      "class": "RSK",
      "title": "风险 RSK-<nn>（§4.2 文档内编号：各文档风险表自 RSK-01 起）",
      "pattern": "\\bRSK-[0-9]{1,3}\\b",
      "owner_docs_glob": [
        "docs/**/*.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "文档内编号：属主 = 引用它的那篇文档自身，全库悬空校验无意义 → 只判紧邻文档名（§5.2）",
      "adjacent_required": true
    },
    {
      "name": "ST",
      "class": "ST",
      "title": "专项内部实施阶段 ST-<n>（§4.2 文档内编号；存量 P0~P5）",
      "pattern": "\\bST-[0-9]{1,2}\\b",
      "owner_docs_glob": [
        "docs/**/*.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": null,
      "check_dangling": false,
      "adjacent_required": true
    },
    {
      "name": "UL",
      "class": "UL",
      "title": "UI 标准化四层 UL-<n>（§4.2 文档内编号；存量报告 UI 四层 L0~L3）",
      "pattern": "\\bUL-[0-9]\\b",
      "owner_docs": [
        "docs/UI设计/UI_设计架构.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": "UL-3",
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "UI",
        "架构"
      ]
    },
    {
      "name": "LAT",
      "class": "LAT",
      "title": "链路延迟分段 LAT-<nn>（§4.2 文档内编号；存量 L1~L11）",
      "pattern": "\\bLAT-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "scope": "doc-scoped",
      "frozen": false,
      "cursor": "LAT-11",
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "延迟"
      ]
    },
    {
      "name": "CS",
      "class": "CS",
      "title": "CubeMX 定制存活三层 CS-1~CS-3（§4.2；存量 AGENTS.md 的 L1/L2/L3）",
      "pattern": "\\bCS-[0-9]\\b",
      "owner_docs": [
        "docs/子系统设计/看门狗设计说明.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "CS-3",
      "check_dangling": true,
      "adjacent_required": true,
      "cursor_note": "CS-1~CS-3（§4.2）",
      "adjacent_cues": [
        "看门狗",
        "存活"
      ]
    },
    {
      "name": "N-RPT",
      "class": "N-RPT",
      "title": "《项目审查与优化建议报告》自有编号 N-xx（§4.3 冻结历史快照）",
      "pattern": "\\bN-[0-9]{1,3}[a-z]?\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": null,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "adjacent_required": true,
      "adjacent_cues": [
        "报告",
        "审查"
      ],
      "collides_with": "N",
      "cursor_note": "⚠ 与登记簿 N-x 同名不同义（§4.3 / AGENTS.md 模块约定）→ 引用必须紧邻「报告」或报告文档名",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "D-RPT",
      "class": "D-RPT",
      "title": "报告自有编号 D-x（§4.3 冻结历史快照）",
      "pattern": "\\bD-[0-9]\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": null,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "adjacent_required": true,
      "adjacent_cues": [
        "报告",
        "审查"
      ],
      "collides_with": "D",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "S-RPT",
      "class": "S-RPT",
      "title": "报告自有编号 S-x（§4.3 冻结历史快照）",
      "pattern": "\\bS-[0-9]\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": null,
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "报告",
        "审查"
      ],
      "collides_with": "N",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "R-RPT",
      "class": "R-RPT",
      "title": "报告自有编号 R-x（§4.3 冻结；内存优化项）",
      "pattern": "\\bR-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "R-9",
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "报告",
        "审查"
      ],
      "cursor_note": "实测现存至 R-9（2026-10-15 落地）；§1.2 记「R1=风险、R-2=内存优化项」同字母歧义",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "F-RPT",
      "class": "F-RPT",
      "title": "报告自有编号 F-x（§4.3 冻结历史快照）",
      "pattern": "\\bF-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "报告",
        "审查"
      ],
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "A-AUDIT",
      "class": "A-AUDIT",
      "title": "CH395F_Trap_Records 2026-10-11 审计快照 A1~A6（§4.3 冻结）",
      "pattern": "\\bA[1-6]\\b",
      "owner_docs": [
        "docs/问题记录/CH395F_Trap_Records.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "A6",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与实机预检 A1~A8（§4.2 → SC-nn）同形 → 只在本档内判存在，不做全库悬空",
      "adjacent_required": true,
      "adjacent_cues": [
        "审计",
        "Trap_Records"
      ],
      "collides_with": "A-REVIEW",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "B-AUDIT",
      "class": "B-AUDIT",
      "title": "CH395F_Trap_Records 2026-10-11 审计快照 B1~B10（§4.3 冻结）",
      "pattern": "\\bB10\\b|\\bB[1-9]\\b",
      "owner_docs": [
        "docs/问题记录/CH395F_Trap_Records.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "B10",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与主线 B0~B10、位号 B1 三方同形（§1.2「B10 在规划是送检窗口、在陷阱审计是孤儿监听」）→ 只在本档内判",
      "adjacent_required": true,
      "adjacent_cues": [
        "审计",
        "Trap_Records"
      ],
      "collides_with": "B",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "S-REVIEW",
      "class": "S-REVIEW",
      "title": "2026-10-02 复审条目 S1~S14（§7.1 → WI；编号不回收）",
      "pattern": "\\bS1[0-4]\\b|\\bS[1-9]\\b",
      "owner_docs": [
        "docs/任务规划/测试与架构专项.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "S14",
      "cursor_owner_only": true,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "cursor_note": "「编号不随条目删除而回收」（专项文档卷首）→ 已销项的号再被引用即悬空；⚠ 与登记簿 S-3/S-4/S-5 同号不同义（§1.2），也与 CI 步骤号 S3、代码规范条款号 S3 同形 → 文档外只告警",
      "adjacent_cues": [
        "复审",
        "专项"
      ]
    },
    {
      "name": "A-REVIEW",
      "class": "A-REVIEW",
      "title": "2026-10-02 复审条目 A-1~A-7（§7.1 → WI）",
      "pattern": "\\bA-[0-9]\\b",
      "owner_docs": [
        "docs/任务规划/测试与架构专项.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "A-7",
      "check_dangling": true,
      "cursor_note": "现存 A-4/A-5 行，其余已销项（编号不回收）",
      "adjacent_cues": [
        "复审",
        "专项"
      ]
    },
    {
      "name": "T-REVIEW",
      "class": "T-REVIEW",
      "title": "2026-10-02 复审条目 T-1~T-5（专项文档卷首，编号不回收）",
      "pattern": "\\bT-[1-5]\\b",
      "owner_docs": [
        "docs/任务规划/测试与架构专项.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "T-5",
      "check_dangling": true,
      "adjacent_cues": [
        "复审",
        "专项"
      ],
      "collides_with": "N"
    },
    {
      "name": "P-AUDIT",
      "class": "P",
      "title": "2026-09 代码审计缺陷条目 P0-x~P3-x（§4.3 冻结；在册项 §7.1 → DEF）",
      "pattern": "\\bP[0-3]-[0-9]{1,2}\\b",
      "owner_docs": [
        "docs/任务规划/README.md",
        "docs/任务规划/测试与架构专项.md",
        "docs/任务规划/登记簿.md",
        "docs/任务规划/排期详述.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": true,
      "dangling_outside_owner": "warn",
      "adjacent_required": true,
      "adjacent_cues": [
        "审计",
        "报告",
        "P1 收尾",
        "严重度"
      ],
      "cursor_note": "⚠ 档位词 P0~P3 不带 -<数字> 后缀（§4.4）；本族是历史审计条目，形态按 §4.3 冻结沿用，新发现改语义标识（§3.3）；报告侧 P-x 属历史基线（§4.3），文档外按告警处理",
      "snapshot_only": true,
      "snapshot_note": "§4.3 冻结历史快照：只在引用写了文档名（紧邻线索）时参与定族，不参与「定义位优先」——避免同号把活登记处接管走"
    },
    {
      "name": "O-DOC",
      "class": "O",
      "title": "各设计文档「本期不做 / 遗留可选项」O1~O4（§3.2 默认不造编号）",
      "pattern": "\\bO[1-9]\\b",
      "owner_docs_glob": [
        "docs/**/*.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "§3.2：这类清单默认改 § 小节引用；确需逐条引用才用文档内编号 OOS-<nn>。登记为族只为防校验 1 误报",
      "adjacent_required": true,
      "adjacent_cues": [
        "遗留",
        "不做",
        "可选"
      ]
    },
    {
      "name": "H-GAP",
      "class": "H-GAP",
      "title": "模拟器差距清单 H-1~H-7（§7.1 → GAP-01~07）",
      "pattern": "\\bH-[0-9]\\b",
      "owner_docs": [
        "docs/测试说明/模拟器差距清单.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "H-7",
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "差距"
      ]
    },
    {
      "name": "L-GAP",
      "class": "L-GAP",
      "title": "模拟器差距清单 L-1~L-4（§7.1 → GAP-08~11）",
      "pattern": "\\bL-[0-9]\\b",
      "owner_docs": [
        "docs/测试说明/模拟器差距清单.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "L-4",
      "check_dangling": true,
      "adjacent_required": true,
      "adjacent_cues": [
        "差距"
      ]
    },
    {
      "name": "N-GAP",
      "class": "N-GAP",
      "title": "模拟器差距清单 N-1~N-6（§7.1 → GAP-12~17；与登记簿 N-x 同名不同义）",
      "pattern": "\\bN-[0-9]\\b",
      "owner_docs": [
        "docs/测试说明/模拟器差距清单.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "N-6",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "1 位数 N-x 与登记簿同号（§1.2 病根）→ 本族不判悬空，只在属主文档内拦越游标；迁移属 §9 阶段 1-①",
      "collides_with": "N"
    },
    {
      "name": "U-RPT",
      "class": "U",
      "title": "报告 UI 标准化簇 U1~U5（§4.3 冻结历史快照）",
      "pattern": "\\bU[1-5]\\b",
      "owner_docs": [
        "docs/问题记录/项目审查与优化建议报告.md",
        "docs/任务规划/README.md",
        "docs/任务规划/登记簿.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "U5",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与 UI 状态机 U1~U15、位号 U17 三方同形（§4.4 位号目录已排除）→ 只拦越游标",
      "cursor_note": "U1~U5 见报告 §6.5；W6 波次按此推进（docs/任务规划/README.md §2.0）"
    },
    {
      "name": "U-STATE",
      "class": "U-STATE",
      "title": "Socket 状态机组合 U1~U15（§1.1 各模块设计文档自造；文档内编号）",
      "pattern": "\\bU1[0-5]\\b|\\bU[1-9]\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md",
        "docs/网络/Net层阻塞模型架构设计.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "U15",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "裸形与报告 U1~U5、位号 U17 同形（§1.2「U1 四义」）→ 只在属主文档内拦越游标",
      "adjacent_required": true,
      "adjacent_cues": [
        "状态机",
        "组合",
        "自愈"
      ],
      "collides_with": "U"
    },
    {
      "name": "D-DOC",
      "class": "D-DOC",
      "title": "网络自愈设计决策 D1~D10（§4.2 目标 DR-<nnn>；§7.1 D1~D7 → DR-001~007）",
      "pattern": "\\bD10\\b|\\bD[1-9]\\b",
      "owner_docs": [
        "docs/网络/网络自愈架构设计.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "D10",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与验证窗口 D2~D7、位号 D7、报告 D-x 四方同形（§1.2）→ 只在属主文档内拦越游标",
      "adjacent_required": true,
      "adjacent_cues": [
        "决策",
        "自愈"
      ],
      "collides_with": "D"
    },
    {
      "name": "V-WD",
      "class": "V",
      "title": "看门狗验证用例 V2/V4/V5（§7.1 → SC-<nn>）",
      "pattern": "\\bV[2-9]\\b",
      "owner_docs": [
        "docs/子系统设计/看门狗设计说明.md",
        "docs/测试说明/实机测试实施指南.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": null,
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与固件版本号 V0.1/V1.0、实机预检项同形 → 只在属主文档内判",
      "adjacent_required": true,
      "adjacent_cues": [
        "看门狗",
        "验证",
        "实机"
      ]
    },
    {
      "name": "RISK",
      "class": "RISK",
      "title": "专项风险裸形 R1~R8（§4.2 目标 RSK-<nn>；文档内编号）",
      "pattern": "\\bR[1-8]\\b",
      "owner_docs": [
        "docs/算法/继电保护功能复现规划.md",
        "docs/子系统设计/看门狗设计说明.md"
      ],
      "scope": "doc-scoped",
      "frozen": true,
      "cursor": "R8",
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "与报告 R-x（内存优化项，连字符形）同字母不同形（§1.2）→ 只在属主文档内拦越游标",
      "adjacent_required": true,
      "adjacent_cues": [
        "风险",
        "规划",
        "看门狗"
      ]
    },
    {
      "name": "T-TEST",
      "class": "T-TEST",
      "title": "测试分层五档 T0/T0.5/T1/T2/T3（§4.2 目标形态；现存写 L0~L3）",
      "pattern": "\\bT[0-3](?:\\.5)?\\b",
      "owner_docs": [
        "docs/测试说明/测试开发标准流程.md"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": null,
      "cursor_owner_only": true,
      "check_dangling": false,
      "dangling_note": "§7.1 迁移批未落地（现存字面是 L0~L3）→ 本族是迁入目标，登记只为让新写法可判定；裸形 T1~T3 与 UART 引脚功能名同形，不做全库判定"
    },
    {
      "name": "G-GATE",
      "class": "G",
      "title": "门禁档位 G0~G3（§4.2，与测试分层两套不合并）",
      "pattern": "\\bG[0-3](?:\\.5)?\\b",
      "owner_docs": [
        "docs/测试说明/测试开发标准流程.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "cursor_owner_only": true,
      "check_dangling": false
    },
    {
      "name": "L-LAYER",
      "class": "L-LAYER",
      "title": "测试分层 / 算法层现存裸形 L0~L3（§4.2 目标 → T0~T3；§1.2 记四义）",
      "pattern": "\\bL[0-3](?:\\.5)?\\b",
      "owner_docs": [
        "docs/测试说明/测试开发标准流程.md",
        "App/algo/README.md"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": null,
      "check_dangling": false,
      "dangling_note": "阶段 1-②（L0~L3 → T0~T3，全库最大机械批次）未落地 → 本族只登记不判定（§9）"
    },
    {
      "name": "CODE-RULE",
      "class": "CODE-RULE",
      "title": "嵌入式 C 代码规范条款号（V1.0；配原文章节号，如 CODE-RULE-03 (3.4.1)）",
      "pattern": "\\bCODE-RULE-[0-9]{2}\\b",
      "digit_width": [
        2,
        2
      ],
      "owner_docs": [
        "scripts/check_coding_standard.py"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "CODE-RULE-19",
      "cursor_owner_only": true,
      "owner_note": "属主登记处 = 门禁脚本的规则表本身（单一事实源）；docs/代码规范/pre-commit使用说明.md 与规范原文是引用方",
      "cursor_note": "2026-10-20 批 1 由 scripts/rename_ids.py 从裸形 S1~S19 单词化（旧号见 id_aliases.json 的 scoped 条目）。S14 历史上不存在（脚本无该条），空洞不复用 → 游标 19"
    },
    {
      "name": "MENU-STATE",
      "class": "MENU-STATE",
      "title": "UI 菜单像素回归状态号（按键序列状态，共 8 态）",
      "pattern": "\\bMENU-STATE-[0-9]{2}\\b",
      "digit_width": [
        2,
        2
      ],
      "owner_docs": [
        "simulator/tests/check_menu_rows.py"
      ],
      "scope": "global",
      "frozen": true,
      "cursor": "MENU-STATE-07",
      "cursor_owner_only": true,
      "owner_note": "属主登记处 = check_menu_rows.py 的 STATES 表（键序 → 状态）；UI_自动化测试流程.md 与 simulator/README.md 是引用方",
      "cursor_note": "2026-10-20 批 1 从裸形 S0~S7 单词化（原名与登记簿 S-x、代码规范条款、2026-10-02 复审专项条目四义撞形，见 §1.2）。8 态封顶：加状态先改游标"
    },
    {
      "name": "TC-HOST-NANDPORT",
      "class": "TC",
      "title": "主机侧单测用例号：dhara NAND 移植层（N-21）（test/host/nand_port）",
      "pattern": "\\bTC-NANDPORT-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/nand_port/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-NANDPORT-700",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-PROTSET",
      "class": "TC",
      "title": "主机侧单测用例号：保护定值模型 L3（test/host/prot_set）",
      "pattern": "\\bTC-PROTSET-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/prot_set/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-PROTSET-011",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-PROTELEM",
      "class": "TC",
      "title": "主机侧单测用例号：保护元件/判据框架 L3（test/host/prot_elm）",
      "pattern": "\\bTC-PROTELEM-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/prot_elm/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-PROTELEM-013",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-FREQ",
      "class": "TC",
      "title": "主机侧单测用例号：L2.5 测频（自适应窗）（test/host/freq）",
      "pattern": "\\bTC-FREQ-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/freq/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-FREQ-011",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-FTPAUTH",
      "class": "TC",
      "title": "主机侧单测用例号：FTP 鉴权与锁定策略（test/host/ftp_auth）",
      "pattern": "\\bTC-FTPAUTH-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/ftp_auth/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-FTPAUTH-010",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-SHA256",
      "class": "TC",
      "title": "主机侧单测用例号：SHA-256 摘要（口令哈希底座）（test/host/sha256）",
      "pattern": "\\bTC-SHA256-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/sha256/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-SHA256-008",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-SOE",
      "class": "TC",
      "title": "主机侧单测用例号：SOE 事件顺序记录编解码（test/host/soe）",
      "pattern": "\\bTC-SOE-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/soe/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-SOE-007",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-ADCHEALTH",
      "class": "TC",
      "title": "主机侧单测用例号：L1 采集有效性校验（test/host/adc_health）",
      "pattern": "\\bTC-ADCHEALTH-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/adc_health/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-ADCHEALTH-011",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（用户裁定 2026-10-21）：这些号实测在代码目录外零消费者（唯一外部引用是 id_aliases.json 自己），故属主登记处 = 单测代码本身，不逐号补文档；class 仍为 TC → 跨模块同号由校验 4 抓",
      "cursor_note": "游标按实测最大号收录（2026-10-21）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-IEC104",
      "class": "TC",
      "title": "主机侧单测用例号：IEC 60870-5-104 协议栈（test/host/iec104）",
      "pattern": "\\bTC-IEC104-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/iec104/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-IEC104-023",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径同其余 TC-HOST 族；本族是 2026-10-21 补漏——上批模块码改名前它是纯数字 `TC-104-*`，未进当时的悬空普查，故漏建族",
      "cursor_note": "游标按实测最大号收录（2026-10-21）"
    },
    {
      "name": "TC-HOST-NETCFG",
      "class": "TC",
      "title": "主机侧单测用例号：网络配置编排与跨任务保存交接（test/host/net_cfg）",
      "pattern": "\\bTC-NETCFG-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/net_cfg/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-NETCFG-056",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；本族 2026-10-23 随覆盖率口径 §9 P1 第①批新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-FTPCFG",
      "class": "TC",
      "title": "主机侧单测用例号：FTP 鉴权配置 [ftp] 段（test/host/ftp_cfg）",
      "pattern": "\\bTC-FTPCFG-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/ftp_cfg/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-FTPCFG-014",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；本族 2026-10-23 随覆盖率口径 §9 P1 第①批新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-PROTSTOR",
      "class": "TC",
      "title": "主机侧单测用例号：保护定值持久化胶水层（test/host/prot_set_store）",
      "pattern": "\\bTC-PROTSTOR-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/prot_set_store/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-PROTSTOR-016",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；本族 2026-10-23 随覆盖率口径 §9 P1 第①批新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-TASKPROF",
      "class": "TC",
      "title": "主机侧单测用例号：任务耗时探针与上报节流（test/host/task_prof）",
      "pattern": "\\bTC-TASKPROF-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/task_prof/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-TASKPROF-020",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；本族 2026-10-23 随覆盖率口径 §9 P1 第①批新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-TC-HOST-LFTPIO",
      "class": "TC",
      "title": "主机侧单测用例号：FTP 文件 IO 层与路径规范化（test/host/lftpd_io）",
      "pattern": "\\bTC-LFTPIO-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/lftpd_io/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-LFTPIO-037",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；2026-10-23 随覆盖率口径 §9 P1 新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    },
    {
      "name": "TC-HOST-TC-HOST-LFTSTR",
      "class": "TC",
      "title": "主机侧单测用例号：FTP 命令行字符串工具（同模块内）（test/host/lftpd_io）",
      "pattern": "\\bTC-LFTSTR-[0-9]{1,4}[a-z]?\\b",
      "digit_width": [
        2,
        4
      ],
      "owner_docs_glob": [
        "test/host/lftpd_io/*"
      ],
      "scope": "global",
      "frozen": false,
      "cursor": "TC-LFTSTR-005",
      "cursor_owner_only": true,
      "check_dangling": true,
      "allow_orphans": true,
      "subitem_ok": true,
      "owner_note": "B 层口径（2026-10-21 批 3 定：这些号在代码目录外零消费者，属主登记处 = 单测代码本身，不逐号补文档）；2026-10-23 随覆盖率口径 §9 P1 新建模块补登记",
      "cursor_note": "游标按实测最大号收录（2026-10-23）：越界即视为未登记的冒号牌"
    }
  ],
  "unmanaged_bare": {
    "note": "以下裸形族在 §9 阶段 1-② 迁移落地前**不做全库判定**——它们彼此、与元器件位号（§4.4）、与档位词大面积同形（§1.2 的五义/四义清单）。这些族的判定范围已收窄到「属主登记处文档内」（cursor_owner_only），文档外降为告警；显式登记 = 记录盲区，不是「检查通过」。",
    "patterns": [
      "\\bL[0-9](?:\\.[0-9])?\\b",
      "\\bP[0-3]\\b",
      "\\bU[0-9]{1,2}\\b",
      "\\bH[0-9]\\b",
      "\\bI[0-9]\\b",
      "\\bJ[0-9]\\b",
      "\\bQ[0-9]{1,2}\\b",
      "\\bF[0-9]{1,2}\\b",
      "\\bR[0-9]\\b",
      "\\bV[0-9]\\b"
    ]
  },
  "owner_docs_exclude": [
    "docs/测试说明/测试文档模板规范.md"
  ],
  "designator_rule": "硬件语料位号识别：docs/硬件平台/ 与 docs/芯片手册/ 里匹配 ^[RCDJXUT][0-9]{1,3}$（无连字符）的字面量判为**位号**，不产生任何编号结论；不含 B（V0.0 网表报告的 B1 是真专项条目），带连字符的 D-7/N-18/TC-206 不受影响。机制在 check_ids.py 的 add() 里落地（统计键 designator_skipped）。**本目录仍未纳入扫描语料**：纳入前必须先把位号从可判定比例的 refs_total 里减掉，否则约 4200 处位号会把比例分母灌水、掩盖真实变化。 【批 9 扩展】同一规则再覆盖**引脚名/总线名/网名/区间**：^[A-Z]{2,3}[0-9]{1,2}(-[0-9]{1,2})?（如 PB12-15、PG0-15、PF13-15、DB0-15、OS0-2、KEY1-3、AIN1），同样不进 refs_total。带连字符的一字母形态（C-10 / A-9 / N-18 / D-7）与 TC-206 / TC1003 一律不受影响，仍照旧判。器件料号（FOC-817SC-F 被切成 FOC-817）**不做形状规则**：[A-Z]{3}-\\d{3} 与真家族 DEF-* 撞形，代价远大于收益，故留在台账 reason 里记账。"
}