74efa671bb
Flat-expand the board output driver from 4 to 10 channels as decided: IOBOARD_DO_COUNT 4->10, mask uint8_t->uint16_t, IOBOARD_DO_MASK_ALL 0x03FF. The 6 new pins keep their bit positions: KO_LED1=PF2(bit4), KO_LED2=PF3(bit5), KO_24V=PF4(bit6), KO4=PF5(bit7), KO5=PC15(bit8), KO_LED3=PE6(bit9); the original 4 (KO6/TRIP/ERT/CLZ) keep bit0..3. Backups-domain PC15 is used as a signal bit only (+/-3 mA limit). No 24V supply interlock and no LED special-casing: the driver writes KO_24V as an ordinary bit; callers needing relay power sequencing must assert it before energizing a channel. do_write/get/read_level and the shadow register are all uint16_t; do_apply flushes four port segments (GPIOC/GPIOF/GPIOC/GPIOE) and do_read_level caches three port ODRs. UI: UI_DATA_DO_N 4->10, dio_do_mask uint16_t, UI_DATA_VER 3->4 because dio_do_valid shifts 211->212; feed mask and dio row table extended; content-page golden references regenerated for 51 rows / 7 pages. Host ioboard tests 127/127 and ui_data tests 305/305 pass; Keil rebuild 0 errors 0 warnings. RAM ledger, memory snapshot and size attestation refilled from the authoritative map. Docs: ioboard spec v1.2->v1.3 and the resolved 6-pin question closed out.