50ee1b4402
Two comment-only follow-ups carried over from gate #33 (both deferred by the reviewer to keep the accepted face frozen; no code, no size impact - attestation restamped after a no-diff rebuild): - Drivers/BSP/IOBOARD/README.md item 6: the "what I last asked for" gloss of the software shadow register is exact for the 9 relay/LED bits but not for bit6, which ioboard_do_get() reports as the driver-synthesised supply state. Qualify it in place and point at item 4 for the rule instead of restating it. - test/host/ioboard/ioboard_test.c: the ACTIVE-level comment says the polarity fact lives in README section 6 item 7; it has always been item 5 (item 7 is the PE2/PE4 naming residue). This test is the polarity pin, so a wrong cross-ref here is the worst place to leave one.