2b466b85f0
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.
Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:
defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
→ ioboard_di_snap_lookup() [new registration channel]
→ ui_data_feed_tick() (uiTask, 200 ms)
→ ui_data_rt_t.dio_di_* / dio_do_*
No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).
Semantic honesty, recorded in ui_page_di_do.c and README §6:
· Output state is the software shadow register (ODR mirror), NOT a
mechanical contact feedback — this platform has no auxiliary contact
readback path. ioboard_do_read_level() also reads ODR, so comparing
the two is tautological.
· IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
schematic.
· Input bit order has not been verified by manual shorting. The
2026-11-16 run read 0x00 eight times because the operator had no time
to short each channel — the data path itself was fine.
· Board-level inputs are deliberately kept out of the 33-point telemetry
bitmap (IEC 104 point-table semantics); the two have no mapping.
Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.
Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.
Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.
Reviewed independently; zero blocking findings.
268 lines
8.4 KiB
C
268 lines
8.4 KiB
C
/*
|
||
* 模块名称:开入(DI)去抖与快照——纯逻辑实现(本模块可主机侧测试的那一半)
|
||
* 模块功能:ioboard_di.h 全部纯函数(另含一张单指针登记表,供写者与读者跨任务
|
||
* 共享同一份快照——表本身不涉及 HAL/FreeRTOS,仍是纯逻辑)。
|
||
* 零 HAL、零 FreeRTOS;唯一的全局状态是登记表,只由写者登记一次、之后只读。
|
||
* MCU(ARMCC C99)与主机侧 MSVC 编译**同一份源码**。
|
||
* 适用平台:任何 C99
|
||
* 作者:王建锋
|
||
* 创建日期:2026-11-16
|
||
* 修改记录:
|
||
* 2026-11-16 王建锋 创建
|
||
*/
|
||
|
||
#include "ioboard_di.h"
|
||
|
||
/* 空指针统一按 "0" 处理:本层是纯逻辑,不为防御性检查引入错误码;
|
||
* 调用方(defaultTask)传的都是静态对象地址,NULL 只可能出现在测试里 */
|
||
static uint8_t di_is_null(const void *p)
|
||
{
|
||
return (p == 0) ? 1U : 0U;
|
||
}
|
||
|
||
/* ======================== 通道去抖 ======================== */
|
||
|
||
void ioboard_di_ch_reset(ioboard_di_ch_t *ch, uint8_t n, uint32_t now_ms)
|
||
{
|
||
uint8_t i;
|
||
|
||
if (di_is_null(ch) != 0U) {
|
||
return;
|
||
}
|
||
|
||
for (i = 0U; i < n; i++) {
|
||
ch[i].t_ms = now_ms;
|
||
ch[i].raw = 0U;
|
||
ch[i].stable = 0U;
|
||
ch[i].started = 0U;
|
||
}
|
||
}
|
||
|
||
uint8_t ioboard_di_ch_feed(ioboard_di_ch_t *c, uint8_t level, uint32_t now_ms,
|
||
uint32_t window_ms)
|
||
{
|
||
uint8_t lvl;
|
||
|
||
if (di_is_null(c) != 0U) {
|
||
return 0U;
|
||
}
|
||
|
||
lvl = (level != 0U) ? 1U : 0U;
|
||
|
||
/* 一、首个样本直接确立:上电后不必空等一个窗口才有开入值 */
|
||
if (c->started == 0U) {
|
||
c->started = 1U;
|
||
c->raw = lvl;
|
||
c->stable = lvl;
|
||
c->t_ms = now_ms;
|
||
return 0U; /* 首拍不算"稳定电平翻转":此前没有稳定值可翻 */
|
||
}
|
||
|
||
/* 二、原始电平变了:重新开始计时。抖动只会不断推迟翻转,这就是去抖 */
|
||
if (lvl != c->raw) {
|
||
c->raw = lvl;
|
||
c->t_ms = now_ms;
|
||
return 0U;
|
||
}
|
||
|
||
/* 三、原始电平持续满窗口 → 稳定电平跟随。
|
||
* 用无符号减法而不是 now >= t + window:tick 在 49.7 天处回绕时前者依然正确,
|
||
* 后者会在回绕附近出现一次长达 49 天的"永不翻转"(或者反过来瞬间误翻)。
|
||
* 边界取 >=:恰好满 20 ms 就应翻转。 */
|
||
if ((c->stable != lvl) && ((uint32_t)(now_ms - c->t_ms) >= window_ms)) {
|
||
c->stable = lvl;
|
||
return 1U;
|
||
}
|
||
|
||
return 0U;
|
||
}
|
||
|
||
/* ======================== 双区快照 ======================== */
|
||
|
||
uint8_t ioboard_di_snap_publish(ioboard_di_snapshot_t *s, uint8_t mask, uint8_t valid,
|
||
uint8_t is_fail)
|
||
{
|
||
uint8_t changed;
|
||
uint8_t was_valid;
|
||
|
||
if (di_is_null(s) != 0U) {
|
||
return 0U;
|
||
}
|
||
|
||
/* 先递增成奇数 = "正在写";数据写完再递增成偶数 = "可读" */
|
||
s->seq++;
|
||
|
||
was_valid = s->valid;
|
||
|
||
changed = 0U;
|
||
if (s->change_seq == 0U) {
|
||
/* 第一次发布:视为一次变化(让上位机区分"还没有值"与"已建立基线") */
|
||
changed = 1U;
|
||
} else if (s->mask != mask) {
|
||
changed = 1U;
|
||
}
|
||
|
||
/* 读失败**不自行写 0**:mask 就是调用方传进来的值(失败拍传的是上一有效值) */
|
||
s->mask = mask;
|
||
s->valid = (valid != 0U) ? 1U : 0U;
|
||
|
||
if (is_fail == 0U) {
|
||
if (s->fail_count < (int32_t)IOBOARD_DI_FAIL_COUNT_CAP) {
|
||
s->fail_count++;
|
||
}
|
||
} else {
|
||
/* 任何一次成功读都说明"当前这一拍读到了":计数从 0 重新累计,
|
||
* 表示**连续**失败拍数。不归零的话,一次偶发失败会让计数永久停在上界,
|
||
* 之后真正的断线再也看不出来(饱和计数只拦"长时间连续断线")。 */
|
||
s->fail_count = 0;
|
||
}
|
||
|
||
/* 有效 → 失效 的下降沿记一次故障次数(恢复沿不改 fail_edges,靠 valid 回落体现) */
|
||
if ((was_valid != 0U) && (s->valid == 0U)) {
|
||
s->fail_edges++;
|
||
}
|
||
|
||
if (changed != 0U) {
|
||
s->change_seq++;
|
||
}
|
||
|
||
s->seq++;
|
||
return changed;
|
||
}
|
||
|
||
uint8_t ioboard_di_snap_read(const ioboard_di_snapshot_t *s, uint8_t *out_mask,
|
||
uint32_t *out_seq)
|
||
{
|
||
uint32_t s1;
|
||
uint32_t s2;
|
||
uint8_t n;
|
||
|
||
if (di_is_null(s) != 0U) {
|
||
if (out_mask != 0) {
|
||
*out_mask = 0U;
|
||
}
|
||
if (out_seq != 0) {
|
||
*out_seq = 0U;
|
||
}
|
||
return 0U;
|
||
}
|
||
|
||
/* 一次读取两遍并校验序号:读期间若被写者打断,序号会变化或为奇数 → 作废重来 */
|
||
for (n = 0U; n < (uint8_t)IOBOARD_DI_SNAP_RETRY; n++) {
|
||
s1 = s->seq;
|
||
if ((s1 & 1U) != 0U) {
|
||
continue; /* 写者正在写 */
|
||
}
|
||
if (out_mask != 0) {
|
||
*out_mask = s->mask;
|
||
}
|
||
if (out_seq != 0) {
|
||
*out_seq = s->change_seq;
|
||
}
|
||
s2 = s->seq;
|
||
if ((s1 == s2) && ((s2 & 1U) == 0U)) {
|
||
return (s->valid != 0U) ? 1U : 0U;
|
||
}
|
||
}
|
||
|
||
/* 连续被打断 20 次:本次不给值(调用方按"无新数据"处理,绝不拿半新半旧的东西) */
|
||
return 0U;
|
||
}
|
||
|
||
void ioboard_di_snap_reset(ioboard_di_snapshot_t *s)
|
||
{
|
||
if (di_is_null(s) != 0U) {
|
||
return;
|
||
}
|
||
|
||
s->seq = 0U;
|
||
s->mask = 0U;
|
||
s->valid = 0U;
|
||
s->fail_count = 0;
|
||
s->fail_edges = 0U;
|
||
s->change_seq = 0U;
|
||
}
|
||
|
||
void ioboard_di_snap_copy(const ioboard_di_snapshot_t *s, ioboard_di_snapshot_t *out)
|
||
{
|
||
if ((di_is_null(s) != 0U) || (di_is_null(out) != 0U)) {
|
||
return;
|
||
}
|
||
|
||
out->seq = s->seq;
|
||
out->mask = s->mask;
|
||
out->valid = s->valid;
|
||
out->fail_count = s->fail_count;
|
||
out->fail_edges = s->fail_edges;
|
||
out->change_seq = s->change_seq;
|
||
}
|
||
|
||
void ioboard_di_snap_faults(const ioboard_di_snapshot_t *s, uint32_t *out_edges,
|
||
int32_t *out_fails)
|
||
{
|
||
if (di_is_null(s) != 0U) {
|
||
if (out_edges != 0) {
|
||
*out_edges = 0U;
|
||
}
|
||
if (out_fails != 0) {
|
||
*out_fails = 0;
|
||
}
|
||
return;
|
||
}
|
||
|
||
if (out_edges != 0) {
|
||
*out_edges = s->fail_edges;
|
||
}
|
||
if (out_fails != 0) {
|
||
*out_fails = s->fail_count;
|
||
}
|
||
}
|
||
|
||
/* ======================== 注册式共享读口 ======================== */
|
||
|
||
/*
|
||
* 已登记的快照对象;NULL = 尚未登记。编译期零初始化,**没有初始化函数**——
|
||
* 于是不存在"谁必须先跑"的启动顺序依赖(见头文件函数说明三)。
|
||
* volatile 的理由见头文件函数说明四:跨任务传地址,读者侧不得被编译器缓存。
|
||
* 占用后永不改变(register 只允许同一指针重复登记),所以读者读它不需要任何保护:
|
||
* 要么读到 NULL(无写者),要么读到一个此后终身有效的地址。
|
||
*/
|
||
static const ioboard_di_snapshot_t *volatile s_di_snap_registered = 0;
|
||
|
||
/*
|
||
* 函数功能:写者登记它的快照对象(只存指针,不复制、不改写内容)
|
||
* 入口参数:s - 由本登记者独占写入的快照对象(s == 0 = 参数非法)
|
||
* 返回值:0 = 登记成功 / 重复登记同一指针(幂等);-1 = 参数非法或已被另一指针占用
|
||
* 限定条件:单写者;先登记再发布(语义全文见 ioboard_di.h 的同名声明)
|
||
* 函数说明:占用后不可变——首个指针即唯一真相源,第二个不同指针一律拒绝并保留首个。
|
||
*/
|
||
int ioboard_di_snap_register(const ioboard_di_snapshot_t *s)
|
||
{
|
||
if (di_is_null(s) != 0U) {
|
||
return -1;
|
||
}
|
||
|
||
/* 首个登记=占用。重复登记必须是**同一个**指针(幂等),否则拒绝并保留首个:
|
||
* 两个快照对象并存就是两份真相,读者拿到哪一份取决于调度顺序,不可接受。 */
|
||
if (s_di_snap_registered == 0) {
|
||
s_di_snap_registered = s;
|
||
return 0;
|
||
}
|
||
if (s_di_snap_registered == s) {
|
||
return 0;
|
||
}
|
||
return -1;
|
||
}
|
||
|
||
/*
|
||
* 函数功能:读者取已登记的快照对象
|
||
* 入口参数:无
|
||
* 返回值:已登记的快照指针;未登记 = NULL(消费者按"无数据源"处理,不是全 0)
|
||
* 限定条件:任意上下文、无锁、不阻塞、不关中断
|
||
* 函数说明:拿到指针后必须再走 ioboard_di_snap_read() 取一致值,不要直接读字段。
|
||
*/
|
||
const ioboard_di_snapshot_t *ioboard_di_snap_lookup(void)
|
||
{
|
||
return s_di_snap_registered;
|
||
}
|