STM32F4-Base/scripts/rename_maps/batch8-s-review-dead.json

{
  "schema": 1,
  "batch": "批次四（2026-10-27 实测清点）：复审残号 S-REVIEW + 两条无主死号的残留引用收口（删号留事实）",
  "applied_by": "scripts/rename_ids.py --no-alias",
  "record": "docs/编号规范.md §4.1.1（复审残号 S1~S14 / E-xx → 写条目本身）、§4.5、§7.3",
  "note": "只清「号当标识用」的标注与待办用法；别名表**故意不写**：这些裸形（S1/S4/S5/S7/S9/S11）在 .c/.h 注释、.pre-commit-config.yaml 与在飞的 docs/测试说明/自动化测试流程.md 里还有活引用，写进别名表等于把那些残留一起洗成「已解析」（§4.1.1：部分死号故意不进别名表，好让门禁继续咬残留引用）。刻意不碰：① 属主登记处 docs/任务规划/测试与架构专项.md（§2.1 S12 定义行 + 首行指针；删行销项属 Ask-first）；② 变更记录行与「原复审项 S4，已闭环」这类显式历史标注；③ 任何 .c/.h（改注释也要重跑 @build，本批零代码）；④ 工作区里别人在飞的脏文件；⑤ 实机测试实施指南.md:5「（S7、A1~A4）」——A1~A4 与本文 A 表（前置检查 A2~A6）同形、语义待属主确认，按 §7.3 第 3 条不猜。",
  "batches": [
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "基线行为；可选优化 (?P<n>S7)（poll 前置 \\+ while 排空），低优先",
      "new": "基线行为；可选优化（poll 前置 + while 排空），低优先",
      "note": "§10.1 表行 D5：S7 是 uiTask 排空待办的死号"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "其余待办 (?P<n>S9)（按键后立即取帧",
      "new": "其余待办（按键后立即取帧",
      "note": "§10.1 表行 D8：客户端待办死号"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "^4\\. \\*\\*(?P<n>S1)\\*\\* 超时参数分档",
      "new": "4. 超时参数分档",
      "note": "§10.2 待办列表项 4"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "^6\\. \\*\\*(?P<n>S4)\\*\\* 发送块配额与 MSS",
      "new": "6. 发送块配额与 MSS",
      "note": "§10.2 待办列表项 6"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "^7\\. \\*\\*(?P<n>S5)\\*\\* 去掉一次 3200B 拷贝",
      "new": "7. 去掉一次 3200B 拷贝",
      "note": "§10.2 待办列表项 7"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/链路延迟测试说明.md"
      ],
      "old": "^8\\. \\*\\*(?P<n>S7)\\*\\* uiTask：",
      "new": "8. uiTask：",
      "note": "§10.2 待办列表项 8"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "old": "堆低水位告警实测（P1-B / (?P<n>S11)）",
      "new": "堆低水位告警实测（P1-B）",
      "note": "步骤表：保留 P1-B 档位词，去掉复审死号"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "old": "GD5F 错误通道回归（P2-A / (?P<n>S9)）",
      "new": "GD5F 错误通道回归（P2-A）",
      "note": "步骤表：同上"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "old": "工程卫生（P3 / (?P<n>S5) \\+ S4 \\+ 待核实项）",
      "new": "工程卫生（P3 + 待核实项）",
      "note": "步骤表：S5+S4 两个死号同批去掉"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/实机测试实施指南.md"
      ],
      "old": "含新增 (?P<n>S5) `test-cppcheck`",
      "new": "含新增 `test-cppcheck`",
      "note": "步骤 7 出口判据里的钩子来源标注"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/子系统设计/看门狗设计说明.md"
      ],
      "old": "——原计划的 (?P<n>S1) 已降级",
      "new": "——原计划的模拟器侧看门狗自检已降级",
      "note": "§4.7：句子本身已写明是什么（模拟器不编译本模块）"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "docs/测试说明/存储维护与容量恢复.md"
      ],
      "old": "自检台账清零，重建 (?P<n>S7) 审计基线",
      "new": "自检台账清零，重建联合判定审计基线",
      "note": "§4.2 标题：S7 = 自检记录联合判定"
    },
    {
      "family": "S-LDG",
      "files": [
        "docs/测试说明/boot_log_data/README.md"
      ],
      "old": "本流程立项：原 `../../任务规划/README\\.md` (?P<n>S-2)（2026-09-22 提出",
      "new": "本流程立项：原 `../../任务规划/README.md` 的「启动日志固化流程」条目（2026-09-22 提出",
      "note": "S-2 在别名表标 void（两义均死），短语取自别名 note"
    },
    {
      "family": "E-AUD",
      "files": [
        "docs/测试说明/m2_data/README.md"
      ],
      "old": "（`--ftp-stress`，(?P<n>E-02) 复现）",
      "new": "（`--ftp-stress` 复现）",
      "note": "E-AUD 族无属主登记处（审计发现号）→ 删号留事实"
    },
    {
      "family": "S-REVIEW",
      "files": [
        "scripts/check_test_traceability.py"
      ],
      "old": "\"\"\"check_test_traceability\\.py - (?P<n>S4) 用例追溯校验",
      "new": "\"\"\"check_test_traceability.py - 用例追溯校验",
      "note": "脚本自述里的死号标注；下一行的「原复审项 S4，已闭环」是显式历史标注，保留"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/verify_log.py"
      ],
      "old": "自检记录联合判定（(?P<n>S7)，2026-10 实机窗口",
      "new": "自检记录联合判定（2026-10 实机窗口",
      "note": "skill 脚本文案"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/run_boot_test.py"
      ],
      "old": "自检台账联合判定（(?P<n>S7)）：默认",
      "new": "自检台账联合判定：默认",
      "note": "run_boot_test.py 流程注释"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/run_boot_test.py"
      ],
      "old": "干净台账，(?P<n>S7) 判 PASS",
      "new": "干净台账 → 判定 PASS",
      "note": "同上"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/run_boot_test.py"
      ],
      "old": "selftest\\.log \\((?P<n>S7)\\): missing/empty",
      "new": "selftest.log: missing/empty",
      "note": "argparse help 文案（纯 ASCII，无脚本按字面量读它）"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/run_boot_test.py"
      ],
      "old": "自检台账基线（(?P<n>S7)「只看本次新增」）",
      "new": "自检台账基线（只看本次新增）",
      "note": "同上"
    },
    {
      "family": "S-REVIEW",
      "files": [
        ".dsh/skills/serial-boot-test/scripts/run_boot_test.py"
      ],
      "old": "自检记录判定（(?P<n>S7)）：默认只判",
      "new": "自检记录判定：默认只判",
      "note": "同上"
    }
  ]
}