cc7f17f231
Three of the six DWT CYCCNT users wrote the counter to zero on init: console_log, net_latency_test and ch395f_reuse_bench. Every one of them only ever takes the difference (CYCCNT - t0) against a local snapshot, so the reset bought nothing and instead caused a bogus ~2^32 delta for anyone who sampled across it. That delta trips the task_prof glitch guard (TASK_PROF_GLITCH_CYC = 10 s worth of cycles), which discards the sample, so a whole worst-case measurement could vanish silently. All three call sites now leave the counter alone; the shared contract is "enable only, never reset", documented at each of the six users. The documented behaviour in the link latency test guide (section 4.3) is updated to match. Net source change is three deleted lines, no new executable code. Verification: - grep for a zero assignment to CYCCNT across the tree: no hits left. - Keil build: Code=257932 RO-data=32108 RW-data=2104 ZI-data=152688, 0 errors 0 warnings. - Host unit tests: console_log 153/153, task_prof 27/27, ioboard 100/100, sb_link 164/164. - Four console_log assertions pinned the absolute number of DWT register touches; dropping the reset write lowers it by one, so their expected counts move from 3 to 2 (and 4 to 3 for TC-CONLOG-093). The test text now says why the third write disappeared. - check_doc_links: 6 known issues, unchanged from baseline.
test/ — 测试代码与主机端脚本
测试分两部分,物理隔离在两个子目录:
board/—— 板端测试套件(.c/.h,编入固件由 testTask 执行)host/—— 主机端脚本(.py,PC 侧驱动板子并判读结果)
目录结构
| 目录 | 内容 | README |
|---|---|---|
board/ |
板端测试套件(编入 Keil 工程,占 RAM) | board/README.md |
host/ |
PC 端测试/判读脚本(Python) | host/README.md |
run_all_suites.py |
多套件回归编排(改宏 → 构建 → 烧录 → 采集,try/finally 保证还原开关);--check-build = 只编译不烧录(纯离机) |
本文 §多套件回归 |
运行方式
# /serial-boot-test 一键闭环(推荐)
& '.venv\Scripts\python.exe' .dsh/skills/serial-boot-test/scripts/run_boot_test.py
# 单独校验日志
& '.venv\Scripts\python.exe' .dsh/skills/serial-boot-test/scripts/verify_log.py <日志文件>
# 多套件回归编排(需真机;自动改开关 + 构建 + 烧录 + 采集,结束后还原)
& '.venv\Scripts\python.exe' test/run_all_suites.py
& '.venv\Scripts\python.exe' test/run_all_suites.py --suites STORAGE,GD5F
& '.venv\Scripts\python.exe' test/run_all_suites.py --dry-run # 只看计划
# 只编译不烧录(不需要 MCU / 串口 / ST-LINK,验证 4 套件可编译性)
& '.venv\Scripts\python.exe' test/run_all_suites.py --check-build
退出码约定:0=PASS / 1=FAIL / 2=采集或烧录错误 / 3=用法或预检错误。
多套件回归(run_all_suites.py)
套件互斥(编译期 #error)意味着跑 4 个套件要手工循环 4 轮。本脚本把它编排成一条
命令,并且无条件还原 test_config.h——跑完忘还原 = 测试固件进库,这是它存在的
核心理由(与提交期门禁 test-suite-switch 互为独立防线)。
⚠️ 每轮要真机烧录 + 采集,4 套件约数分钟起;破坏性套件还会改设备持久状态。 仅回归窗口用,绝不挂 pre-commit。
--check-build 则相反:只改宏 + /keil-build,不烧录不采集,无需任何硬件,用于防止
"测试套件长期编不过而无人知"(2026-08~09 CH395F 套件实例)。改动 test/board/ 下测试
代码后建议先跑它——实测 4 套件均 BUILD_OK: 0 errors, 0 warnings。
⚠️ 注意
- 本目录被 pre-commit 门禁排除(测试代码不受 C 规范约束)
board/套件占用 RAM,启用前先核算预算(见docs/内存管理/)- Keil 工程已同步:
board/下 7 个.c编入MDK-ARM/STM32F4-Demo.uvprojx, IncludePath 含../test/board;移动文件须同步改工程文件 - 套件选择开关:
board/test_config.h的TEST_SUITE_*(互斥,一次只启用一个) - 测试缓冲用分 Phase 复用静态缓冲(避免
L6406E溢出)
相关文档
docs/测试说明/流程与规范/测试开发标准流程.md— 测试验证分层与门禁决策表docs/测试说明/流程与规范/自动化测试流程.md—/serial-boot-test细节与失败模式- 各模块测试指南:
docs/测试说明/板级测试/*_Test_Guide.md docs/测试说明/专项验证/链路延迟测试说明.md