wandering1/STM32F4-Base
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects 1 Releases Wiki Activity

W1 功能主线完成：内存台账三件套(W1-0) + IEC104 上行(B4) + protectTask 板端接线(B5)

Browse Source 
W1-0 台账三件套：scripts/ram_baseline.py（四模式）+ ram_baseline.tsv 趋势 +
docs/内存管理/RAM预算台账.md + pre-commit mem-budget 钩子（RW_IRAM1/RW_CCM >92%
即 FAIL + Top-10 附表）；审查报告 §5.5 三条闭环。

B4 IEC 60870-5-104 上行（被控站，TCP 2404）：App/protocol/iec104/ 三模块
（asdu 编解码 / pts 点表+数据源 vtable / link APCI+FSM，纯逻辑零 I/O）+
App/task/iec104_serv.c（iec104Task，NET_READY 屏障 100ms 分片喂位）。
82 断言 L0.5 全绿 + iec104-unit-test 钩子（第 31 钩子）；
设计说明 docs/子系统设计/IEC104上行设计说明.md 全量回填。

B5 protectTask（L3 板端接线）：App/task/protect_task.c——20ms 判据节拍
prot_elm_run + L5-4 采样故障闭锁（adc_health 电平位→元件复位）+ L5-1 定值
校验和巡检；新增 prot_elm_request_reset() 收口跨上下文复归（104 YK11 落请求、
eval 头部消费）；定值/元件初始化移入 app_main_init（内核前）。TC-PE-010
（prot_elm 28 用例）。

门禁与内存：TASK_WD_PROTECT=8 入 required_mask（产品 0x77→0x1F7、HW 层
0x1F5，看门狗单测 39 断言同步）；FreeRTOS 堆 48→56KB（.ioc L1 参数 +
FreeRTOSConfig.h 同步，RAM预算台账 §6 登记配额 48→56KB）。
ZI 144,008→152,204（+8,196 B = 堆 +8KB，B5 扩容）；Code=204,348。
stack_report：protectTask 512 words 静态链 872 B/余 57%、iec104Task
640 words 1456 B/余 43% 均 PASS；RW_IRAM1 73.1% / RW_CCM 87.9%（<92%）。

验证：@build 0 错 0 警；ci_local 全绿（31 钩子 + 13 主机侧单测）；
doc-links 135 文档 PASS。登记簿 B4/B5 销项、W1 波次完成；保护规划/看门狗
说明/AGENTS（9 任务）/RAM 三文档全部同步。

遗留（验收窗口，非代码空洞）：台架第三方 104 主站往返（送检窗口）、
标准源注入动作判据、@test PROT 锚点 + protect 栈水位 + 新堆 min_ever 复测。
This commit is contained in:
Wanderingss
2026-10-12 12:36:23 +08:00
parent e4134a4723
commit 90db528032
49 changed files with 4300 additions and 223 deletions
Download Patch File Download Diff File Expand all files Collapse all files
test/host/iec104/iec104_test.c
+868
View File
@@ -0,0 +1,868 @@
/*
* 模块名称：IEC 60870-5-104 被控站协议栈主机侧单元测试
* 模块功能：在 PC 上对 App/protocol/iec104 全栈（asdu + pts + link）做离线验证。
*
* 被测对象：真实源文件（#include 原样纳入）：
* iec104_asdu.c + iec104_pts.c + iec104_link.c（B4 协议核心）
* prot_set.c + prot_elm.c + phasor.c + sample_ring.c（板端默认源
* 的链接依赖；定值两段写走**真实 prot_set**）
* 数据源经 iec104_pts_bind_src 注入假源（YC/YX/YK 可控），
* 发送经 send_apdu 回调全量捕获，时基由测试注入。
*
* 覆盖点（docs/子系统设计/IEC104上行设计说明.md §7）：
* TC-104-001 CP56Time2a 往返 / 闰年 / IV / 钳位
* TC-104-002 IOA 3B 与短浮点小端往返
* TC-104-003 APCI 重组：半帧 / 粘帧 / 坏起始符 / 坏长度
* TC-104-004 STARTDT 握手 → RUN
* TC-104-005 OPEN 态 I 帧忽略（序号不消费）
* TC-104-006 总召全流程：actcon→4 分片（首召 COT=4）→actterm；二召 COT=2；RBT→COT=4
* TC-104-007 遥信变位 COV（COT=3）；无效位不触发
* TC-104-008 遥测死区 COV：死区内不发 / 越死区发
* TC-104-009 k 窗：12 未确认停发；S 确认后恢复
* TC-104-010 w 阈：收满 8 发 S
* TC-104-011 t2 到期发 S
* TC-104-012 t3 空闲发 TESTFR act；未答 t1 超时 → IDLE；con 清挂起不误杀
* TC-104-013 遥控两段式：选择/执行成功；失配 PN；拒绝类选择段即 PN
* TC-104-014 定值两段写（真实 prot_set）：越界 PN；执行后 get_f + selfcheck
* TC-104-015 C_RD：YC 命中 / 定值命中 / 未知 IOA COT14+EVI
* TC-104-016 C_CS：clock_sync 收正确 epoch；IV → PN；clock_sync 失败 → PN
* TC-104-017 未知类型 COT12+EVI；错公共地址 COT13+EVI
* TC-104-018 STOPDT：数据停发，TESTFR 仍应答
* TC-104-019 序号错 → IDLE（链路故障）
* TC-104-020 pts：无效通道 IV / 未就绪 NT / 无效遥信 IV / is_dp / 表尺寸
* TC-104-021 C_TS / C_RP actcon
* TC-104-022 周期上送 COT=1（YC 组 + 频率）
* TC-104-023 k 窗满 COV 不丢事件（pend 暂存，窗开后补发）
*
* 通过：全部 TC PASS（main 返回 0）。
* 创建日期：2026-10-12（B4）
*/
#include <stdint.h>
#include <stdio.h>
#include <string.h>
static int s_total = 0, s_passed = 0, s_failed = 0;
#define CHECK(cond, name) do { \
s_total++; \
if (cond) { s_passed++; printf(" [PASS] %s\n", name); } \
else { s_failed++; printf(" [FAIL] %s (line %d)\n", name, __LINE__); } \
} while (0)
#include "iec104_asdu.c"
#include "prot_set.c"
#include "sample_ring.c"
#include "phasor.c"
#include "prot_elm.c"
#include "iec104_pts.c"
#include "iec104_link.c"
/* ---------------- 假数据源（定值转发真实 prot_set） ---------------- */
static float s_f_yc[9];
static int s_f_yc_rc[9];
static uint64_t s_f_bits;
static uint64_t s_f_valid;
static uint32_t s_f_yk_ioa;
static uint8_t s_f_yk_dpc;
static uint8_t s_f_yk_sel;
static int f_yc(uint8_t idx, float *out)
{
if (idx >= 9u) {
return -1;
}
if (s_f_yc_rc[idx] != 0) {
return s_f_yc_rc[idx];
}
*out = s_f_yc[idx];
return 0;
}
static uint64_t f_bits(void) { return s_f_bits; }
static uint64_t f_valid(void) { return s_f_valid; }
static int f_yk(uint32_t ioa, uint8_t dpc, uint8_t sel)
{
s_f_yk_ioa = ioa;
s_f_yk_dpc = dpc;
s_f_yk_sel = sel;
return (ioa == 0x600Au) ? 0 : -1;
}
static int f_set_read(uint32_t addr, float *out)
{
return s_src_set_read(addr, out);
}
static int f_set_write(uint32_t addr, float v, uint8_t sel)
{
return s_src_set_write(addr, v, sel);
}
static const iec104_pts_src_t g_fake = {
f_yc, f_bits, f_valid, f_yk, f_set_read, f_set_write
};
/* ---------------- 发送捕获 + 对时假回调 ---------------- */
#define CAP_MAX 48
#define CAP_SZ 260
static uint8_t s_cap[CAP_MAX][CAP_SZ];
static int s_cap_n;
static uint64_t s_clock_ms;
static int s_clock_rc;
static void cap_send(void *ctx, const uint8_t *apdu, uint16_t len)
{
(void)ctx;
if ((s_cap_n < CAP_MAX) && (len <= CAP_SZ)) {
(void)memcpy(s_cap[s_cap_n], apdu, len);
s_cap_n++;
}
}
static int f_clock(void *ctx, uint64_t ms)
{
(void)ctx;
s_clock_ms = ms;
return s_clock_rc;
}
static iec104_link_t g_lk;
static const iec104_link_cfg_t g_cfg = { 1u, cap_send, f_clock };
/* ---------------- 主站侧模拟（N(R) 单调，照真实主站） ---------------- */
static uint16_t m_ns;
static uint16_t m_nr;
static void m_reset(void)
{
m_ns = 0u;
m_nr = 0u;
s_cap_n = 0;
}
static void feed_u(uint8_t q, uint32_t now)
{
uint8_t b[6];
b[0] = 0x68u; b[1] = 4u; b[2] = q; b[3] = 0u; b[4] = 0u; b[5] = 0u;
iec104_link_on_rx(&g_lk, b, 6u, now);
}
static void feed_i(const uint8_t *asdu, uint16_t len, uint32_t now)
{
uint8_t b[6u + 250u];
uint16_t fs = (uint16_t)(m_ns << 1);
uint16_t fr = (uint16_t)(m_nr << 1); /* N(R) 单调（feed_s 推进） */
b[0] = 0x68u;
b[1] = (uint8_t)(4u + len);
b[2] = (uint8_t)(fs & 0xFFu);
b[3] = (uint8_t)(fs >> 8);
b[4] = (uint8_t)(fr & 0xFFu);
b[5] = (uint8_t)(fr >> 8);
(void)memcpy(&b[6], asdu, len);
iec104_link_on_rx(&g_lk, b, (uint16_t)(6u + len), now);
m_ns = (uint16_t)((m_ns + 1u) % 32768u);
}
static void feed_s(uint16_t nr, uint32_t now)
{
uint8_t b[6];
uint16_t f = (uint16_t)(nr << 1);
b[0] = 0x68u; b[1] = 4u; b[2] = 1u; b[3] = 0u;
b[4] = (uint8_t)(f & 0xFFu);
b[5] = (uint8_t)(f >> 8);
m_nr = nr; /* 主站确认推进（单调） */
iec104_link_on_rx(&g_lk, b, 6u, now);
}
static uint16_t mk_asdu(uint8_t *b, uint8_t type, uint8_t vsq, uint8_t cot,
uint8_t cot_hi, uint8_t with_ioa, uint32_t ioa,
const uint8_t *body, uint16_t blen)
{
uint16_t n = iec104_asdu_put_hdr(b, type, vsq, cot, cot_hi, 1u);
if (with_ioa != 0u) {
iec104_put_ioa(&b[n], ioa);
n += 3u;
}
if (blen > 0u) {
(void)memcpy(&b[n], body, blen);
n += blen;
}
return n;
}
/* ---------------- 复位 / 握手 ---------------- */
static void reset_all(uint32_t now)
{
prot_set_init();
prot_elm_init();
iec104_pts_init();
iec104_pts_bind_src(&g_fake);
(void)memset(s_f_yc, 0, sizeof(s_f_yc));
(void)memset(s_f_yc_rc, 0, sizeof(s_f_yc_rc));
s_f_bits = 0u;
s_f_valid = (1uLL << 14) | (1uLL << 15) | (1uLL << 16) | (1uLL << 17)
| (1uLL << 22) | (1uLL << 30);
s_clock_rc = 0;
s_clock_ms = 0u;
iec104_link_init(&g_lk, &g_cfg, NULL);
iec104_link_open(&g_lk, now);
m_reset();
}
static void handshake(uint32_t now)
{
feed_u(0x07u, now); /* STARTDT act */
}
/* ---------------- 捕获检查 ---------------- */
typedef struct {
uint8_t type, vsq, cot, cot_hi, oa;
uint32_t ca, ioa;
const uint8_t *obj; /* ioa 之后的信息体 */
uint16_t obj_len;
} cap_t;
static int cap_i_count(void)
{
int k, n = 0;
for (k = 0; k < s_cap_n; k++) {
if ((s_cap[k][2] & 0x01u) == 0u) {
n++;
}
}
return n;
}
static int cap_u_count(uint8_t q)
{
int k, n = 0;
for (k = 0; k < s_cap_n; k++) {
if ((s_cap[k][2] & 0x03u) == 0x03u && s_cap[k][2] == q) {
n++;
}
}
return n;
}
static int cap_has_s(uint16_t *nr_out)
{
int k;
for (k = s_cap_n - 1; k >= 0; k--) {
const uint8_t *p = s_cap[k];
if ((p[2] & 0x03u) == 0x01u) {
*nr_out = (uint16_t)(((uint16_t)p[4] | ((uint16_t)p[5] << 8)) >> 1);
return 1;
}
}
return 0;
}
static int cap_i(int n, cap_t *o)
{
int k, seen = 0;
for (k = 0; k < s_cap_n; k++) {
const uint8_t *p = s_cap[k];
uint16_t lf = p[1];
iec104_asdu_hdr_t h;
if ((p[2] & 0x01u) != 0u) {
continue;
}
if (seen == n) {
if (iec104_asdu_parse_hdr(&p[6], (uint16_t)(lf - 4u), &h) != 0) {
return -1;
}
o->type = h.type;
o->vsq = h.vsq;
o->cot = h.cot;
o->cot_hi = h.cot_hi;
o->oa = h.oa;
o->ca = h.ca;
if (h.obj_len >= 3u) {
o->ioa = iec104_get_ioa(h.obj);
o->obj = h.obj + 3u;
o->obj_len = (uint16_t)(h.obj_len - 3u);
} else {
o->ioa = 0u;
o->obj = h.obj;
o->obj_len = 0u;
}
return 0;
}
seen++;
}
return -1;
}
/* ============================ 测试用例 ============================ */
static void tc_cp56(void)
{
uint8_t b[7];
uint64_t e1 = 946684800000ULL; /* 2000-01-01 00:00:00.000 */
uint64_t e2 = 1709188496789ULL; /* 2024-02-29 06:34:56.789（闰日） */
uint64_t back = 0u;
int rc;
iec104_epoch_ms_to_cp56(e1, b);
rc = iec104_cp56_to_epoch_ms(b, &back);
CHECK((rc == 0) && (back == e1), "TC-001 CP56 往返 2000-01-01");
iec104_epoch_ms_to_cp56(e2, b);
back = 0u;
rc = iec104_cp56_to_epoch_ms(b, &back);
CHECK((rc == 0) && (back == e2), "TC-001 CP56 往返闰日 2024-02-29");
b[2] |= 0x80u;
CHECK(iec104_cp56_to_epoch_ms(b, &back) == -2, "TC-001 IV → -2");
iec104_epoch_ms_to_cp56(0u, b); /* 早于 2000 → 钳位 */
back = 0u;
(void)iec104_cp56_to_epoch_ms(b, &back);
CHECK(back == e1, "TC-001 早于 2000 钳位");
}
static void tc_ioa_float(void)
{
uint8_t b[8];
iec104_put_ioa(b, 0x123456u);
CHECK((iec104_get_ioa(b) == 0x123456u) && (b[0] == 0x56u) && (b[1] == 0x34u)
&& (b[2] == 0x12u), "TC-002 IOA 3B 小端");
iec104_put_float(b, 1.0f);
CHECK((b[0] == 0x00u) && (b[1] == 0x00u) && (b[2] == 0x80u)
&& (b[3] == 0x3Fu), "TC-002 float IEEE754 小端");
iec104_put_float(b, -12.5f);
CHECK(iec104_get_float(b) == -12.5f, "TC-002 float 往返");
}
static void tc_apci(void)
{
uint32_t now = 1000u;
reset_all(now);
{
static const uint8_t b[6] = { 0x68u, 4u, 0x07u, 0u, 0u, 0u };
iec104_link_on_rx(&g_lk, b, 3u, now);
CHECK(cap_u_count(0x0Bu) == 0, "TC-003 半帧不触发");
iec104_link_on_rx(&g_lk, &b[3], 3u, now);
CHECK(cap_u_count(0x0Bu) == 1, "TC-003 半帧重组 → con");
}
{
static const uint8_t b[12] = {
0x68u, 4u, 0x43u, 0u, 0u, 0u, /* TESTFR act */
0x68u, 4u, 0x13u, 0u, 0u, 0u /* STOPDT act */
};
iec104_link_on_rx(&g_lk, b, 12u, now);
CHECK((cap_u_count(0x83u) == 1)
&& (iec104_link_state(&g_lk) == IEC104_ST_STOPPED),
"TC-003 粘帧逐处 + STOPDT 生效");
}
reset_all(now);
{
static const uint8_t b[6] = { 0x69u, 4u, 0x07u, 0u, 0u, 0u };
iec104_link_on_rx(&g_lk, b, 6u, now);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_IDLE, "TC-003 坏起始符 → IDLE");
}
reset_all(now);
{
static const uint8_t b[6] = { 0x68u, 3u, 0x07u, 0u, 0u, 0u };
iec104_link_on_rx(&g_lk, b, 6u, now);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_IDLE, "TC-003 坏长度 → IDLE");
}
}
static void tc_startdt(void)
{
uint32_t now = 1000u;
reset_all(now);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_OPEN, "TC-004 open → OPEN");
handshake(now);
CHECK((cap_u_count(0x0Bu) == 1)
&& (iec104_link_state(&g_lk) == IEC104_ST_RUN), "TC-004 STARTDT → RUN");
}
static void tc_open_ignore(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint16_t n;
reset_all(now);
n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u, 1u, 0x4011u, NULL, 0u);
feed_i(a, n, now);
CHECK((cap_i_count() == 0) && (iec104_link_state(&g_lk) == IEC104_ST_OPEN),
"TC-005 OPEN 态 I 帧忽略");
handshake(now);
m_ns = 0u; /* OPEN 忽略不消费序号 → 主站仍从 0 起 */
feed_i(a, n, now); /* ns=0 仍有效（序号未被消费） */
CHECK(cap_i_count() == 1, "TC-005 RUN 后同 ns 正常应答");
}
static void tc_interrogation(void)
{
uint32_t now = 5000u;
uint8_t a[32];
uint8_t body[1];
uint16_t n;
cap_t c;
reset_all(now);
s_f_yc[0] = 111.0f;
s_f_yc_rc[1] = -1; /* idx1（1Ub）无效通道 */
handshake(now);
body[0] = IEC104_RQT_GROUP1;
n = mk_asdu(a, IEC104_T_C_IC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, body, 1u);
feed_i(a, n, now);
CHECK((cap_i_count() == 1) && (cap_i(0, &c) == 0) && (c.type == 100u)
&& (c.cot == IEC104_COT_ACTCON), "TC-006 actcon 即发 COT7");
iec104_link_poll(&g_lk, now);
CHECK(cap_i_count() == 5, "TC-006 首 poll 发满预算 4 分片");
CHECK((cap_i(1, &c) == 0) && (c.type == 3u) && (c.cot == IEC104_COT_INIT)
&& (c.vsq == (uint8_t)(IEC104_VSQ_SQ | 4u)) && (c.ioa == 1u),
"TC-006 YX 双点组 首召 COT=4");
CHECK((cap_i(2, &c) == 0) && (c.type == 1u)
&& (c.vsq == (uint8_t)(IEC104_VSQ_SQ | 29u)) && (c.ioa == 5u),
"TC-006 YX 单点组 29 点");
CHECK((cap_i(3, &c) == 0) && (c.type == 13u)
&& (c.vsq == (uint8_t)(IEC104_VSQ_SQ | 8u)) && (c.ioa == 0x4011u)
&& (c.obj_len == 40u), "TC-006 YC 组 8 点 40B");
if (cap_i(3, &c) == 0) {
CHECK((iec104_get_float(c.obj) == 111.0f) && (c.obj[4] == 0u),
"TC-006 YC 值 111.0 QDS=0");
CHECK(c.obj[9] == IEC104_QDS_IV, "TC-006 无效通道 QDS=IV");
}
CHECK((cap_i(4, &c) == 0) && (c.ioa == 0x401Du) && (c.vsq == 1u),
"TC-006 频率单点 SQ=0");
iec104_link_poll(&g_lk, now + 100u);
CHECK((cap_i_count() == 6) && (cap_i(5, &c) == 0) && (c.type == 100u)
&& (c.cot == IEC104_COT_ACTTERM), "TC-006 actterm 收尾");
/* 二召：init 已清 → COT=2 */
n = mk_asdu(a, IEC104_T_C_IC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, body, 1u);
feed_i(a, n, now + 200u);
iec104_link_poll(&g_lk, now + 200u);
CHECK((cap_i(7, &c) == 0) && (c.type == 3u) && (c.cot == IEC104_COT_BG_SCAN),
"TC-006 二召 COT=2");
/* RBT 位 → COT=4（actcon3 是第 12 个未确认帧 → 先 S 确认窗才开） */
n = mk_asdu(a, IEC104_T_C_IC_NA_1, 1u, IEC104_COT_ACT, IEC104_COT_BIT_RBT,
1u, 0u, body, 1u);
feed_i(a, n, now + 300u);
feed_s(12u, now + 300u);
iec104_link_poll(&g_lk, now + 300u);
CHECK((cap_i(12, &c) == 0) && (c.type == 3u) && (c.cot == IEC104_COT_INIT),
"TC-006 RBT → COT=4");
}
static void tc_cov_yx(void)
{
uint32_t now = 1000u;
cap_t c;
reset_all(now);
handshake(now);
iec104_link_poll(&g_lk, now); /* 建快照 */
CHECK(cap_i_count() == 0, "TC-007 首 poll 无自发");
s_f_bits |= (1uLL << 15); /* YX16（idx15）动作 */
iec104_link_poll(&g_lk, now + 100u);
CHECK((cap_i_count() == 1) && (cap_i(0, &c) == 0) && (c.type == 1u)
&& (c.cot == IEC104_COT_SPONT) && (c.ioa == 16u)
&& (c.obj_len == 1u) && (c.obj[0] == 1u), "TC-007 YX16 变位 COT3");
s_f_bits &= ~(1uLL << 15); /* 复归 */
iec104_link_poll(&g_lk, now + 200u);
CHECK((cap_i_count() == 2) && (cap_i(1, &c) == 0) && (c.ioa == 16u)
&& (c.obj[0] == 0u), "TC-007 YX16 复归再变");
s_f_bits |= (1uLL << 0); /* idx0 无效位 → 不触发 */
iec104_link_poll(&g_lk, now + 300u);
CHECK(cap_i_count() == 2, "TC-007 无效位变位不触发");
}
static void tc_cov_yc(void)
{
uint32_t now = 1000u;
cap_t c;
reset_all(now);
handshake(now);
s_f_yc[0] = 100.0f;
iec104_link_poll(&g_lk, now); /* 快照 = 100 */
s_f_yc[0] = 105.0f; /* 死区 10 内 */
iec104_link_poll(&g_lk, now + 100u);
CHECK(cap_i_count() == 0, "TC-008 死区内不上送");
s_f_yc[0] = 130.0f; /* 130-105=25 > 10 */
iec104_link_poll(&g_lk, now + 200u);
CHECK((cap_i_count() == 1) && (cap_i(0, &c) == 0) && (c.type == 13u)
&& (c.cot == IEC104_COT_SPONT) && (c.ioa == 0x4011u)
&& (iec104_get_float(c.obj) == 130.0f), "TC-008 越死区上送");
}
static void feed_rd(uint32_t now)
{
uint8_t a[16];
uint16_t n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u,
1u, 0x4011u, NULL, 0u);
feed_i(a, n, now);
}
static void tc_k_window(void)
{
uint32_t now = 1000u;
int i;
reset_all(now);
handshake(now);
for (i = 0; i < 12; i++) {
feed_rd(now);
}
CHECK(cap_i_count() == 12, "TC-009 k=12 封顶");
feed_rd(now);
CHECK(cap_i_count() == 12, "TC-009 第 13 个被 k 窗抑制");
feed_s(12u, now); /* 全确认 → 窗开 */
feed_rd(now);
CHECK(cap_i_count() == 13, "TC-009 S 确认后恢复发送");
}
static void tc_w_thresh(void)
{
uint32_t now = 1000u;
uint16_t nr = 0xFFFFu;
int i;
reset_all(now);
handshake(now);
for (i = 0; i < 7; i++) {
feed_rd(now);
}
CHECK(cap_has_s(&nr) == 0, "TC-010 收 7 未发 S");
feed_rd(now); /* 第 8 个 → w 阈 */
CHECK((cap_has_s(&nr) == 1) && (nr == 8u), "TC-010 w=8 → S nr=8");
}
static void tc_t2(void)
{
uint32_t now = 1000u;
uint16_t nr = 0xFFFFu;
reset_all(now);
handshake(now);
feed_rd(now); /* rx_unacked=1，t2 起爆 */
iec104_link_poll(&g_lk, now + 9999u);
CHECK(cap_has_s(&nr) == 0, "TC-011 t2 未到期不发 S");
iec104_link_poll(&g_lk, now + 10001u);
CHECK((cap_has_s(&nr) == 1) && (nr == 1u), "TC-011 t2 到期发 S");
}
static void tc_t3_t1(void)
{
uint32_t now = 1000u;
reset_all(now);
handshake(now);
iec104_link_poll(&g_lk, now + 19999u);
CHECK(cap_u_count(0x43u) == 0, "TC-012 t3 未到期无 TESTFR");
iec104_link_poll(&g_lk, now + 20001u);
CHECK(cap_u_count(0x43u) == 1, "TC-012 t3 到期发 TESTFR act");
iec104_link_poll(&g_lk, now + 20001u + 15001u);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_IDLE, "TC-012 TESTFR 未答 t1 → IDLE");
/* con 清挂起 → 不误杀 */
reset_all(now);
handshake(now);
iec104_link_poll(&g_lk, now + 20001u);
CHECK(cap_u_count(0x43u) == 1, "TC-012 重连 t3 再触发");
feed_u(0x83u, now + 20100u); /* TESTFR con */
iec104_link_poll(&g_lk, now + 35000u);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_RUN, "TC-012 con 清挂起后 t1 不误杀");
}
static void tc_dc(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint8_t body[1];
uint16_t n;
cap_t c;
reset_all(now);
handshake(now);
body[0] = 0x82u; /* S=1, DPC=ON */
n = mk_asdu(a, IEC104_T_C_DC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0x600Au, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 52u) && (c.cot == IEC104_COT_ACTCON)
&& ((c.cot_hi & IEC104_COT_BIT_PN) == 0u), "TC-013 选择段 actcon");
CHECK((s_f_yk_sel == 1u) && (s_f_yk_ioa == 0x600Au), "TC-013 选择段转发源");
body[0] = 0x02u; /* 执行 ON */
n = mk_asdu(a, IEC104_T_C_DC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0x600Au, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(1, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) == 0u)
&& (s_f_yk_sel == 0u), "TC-013 执行段 actcon");
/* 失配：选 ON 执 OFF */
body[0] = 0x82u;
n = mk_asdu(a, IEC104_T_C_DC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0x600Au, body, 1u);
feed_i(a, n, now);
body[0] = 0x01u;
n = mk_asdu(a, IEC104_T_C_DC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0x600Au, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(3, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) != 0u),
"TC-013 执行失配 PN");
/* 拒绝类（YK1）：选择段即 PN */
body[0] = 0x82u;
n = mk_asdu(a, IEC104_T_C_DC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0x6000u, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(4, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) != 0u),
"TC-013 无出口硬件 YK 选择段 PN");
}
static void tc_se(void)
{
uint32_t now = 1000u;
uint8_t a[24];
uint8_t body[5];
uint16_t n;
uint32_t addr = g_prot_set_meta[PS_OC1_CUR].comm_addr; /* 0x8858 */
cap_t c;
reset_all(now);
handshake(now);
CHECK(addr == 0x8858u, "TC-014 OC1 电流定值通讯地址");
iec104_put_float(body, 5.0f);
body[4] = IEC104_QDC_S; /* 选择段 */
n = mk_asdu(a, IEC104_T_C_SE_NC_1, 1u, IEC104_COT_ACT, 0u, 1u, addr, body, 5u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 50u)
&& ((c.cot_hi & IEC104_COT_BIT_PN) == 0u), "TC-014 定值选择 actcon");
body[4] = 0u; /* 执行段 */
n = mk_asdu(a, IEC104_T_C_SE_NC_1, 1u, IEC104_COT_ACT, 0u, 1u, addr, body, 5u);
feed_i(a, n, now);
CHECK((cap_i(1, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) == 0u),
"TC-014 定值执行 actcon");
CHECK(prot_set_get_f(PS_OC1_CUR) == 5.0f, "TC-014 定值已写入（真实 prot_set）");
CHECK(prot_set_selfcheck() == 0, "TC-014 执行后 seal → selfcheck 通过");
iec104_put_float(body, 100000.0f); /* 越上限 */
body[4] = IEC104_QDC_S;
n = mk_asdu(a, IEC104_T_C_SE_NC_1, 1u, IEC104_COT_ACT, 0u, 1u, addr, body, 5u);
feed_i(a, n, now);
CHECK((cap_i(2, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) != 0u),
"TC-014 越界选择段 PN");
}
static void tc_rd(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint16_t n;
cap_t c;
reset_all(now);
handshake(now);
s_f_yc[0] = 222.0f;
n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u, 1u, 0x4011u, NULL, 0u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 13u) && (c.cot == IEC104_COT_REQ)
&& (iec104_get_float(c.obj) == 222.0f), "TC-015 C_RD YC 命中");
n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u, 1u, 0x8858u, NULL, 0u);
feed_i(a, n, now);
CHECK((cap_i(1, &c) == 0) && (c.type == 13u) && (c.ioa == 0x8858u),
"TC-015 C_RD 定值命中");
n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u, 1u, 0x9999u, NULL, 0u);
feed_i(a, n, now);
CHECK((cap_i(2, &c) == 0) && (c.type == 102u)
&& (c.cot == IEC104_COT_UNK_IOA) && ((c.oa & 0x80u) != 0u),
"TC-015 未知 IOA COT14+EVI");
}
static void tc_cs(void)
{
uint32_t now = 1000u;
uint8_t a[24];
uint8_t cp[7];
uint16_t n;
cap_t c;
uint64_t e = 1709188496789ULL;
reset_all(now);
handshake(now);
(void)iec104_epoch_ms_to_cp56(e, cp);
n = mk_asdu(a, IEC104_T_C_CS_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, cp, 7u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 103u)
&& ((c.cot_hi & IEC104_COT_BIT_PN) == 0u) && (s_clock_ms == e),
"TC-016 C_CS 对时成功 epoch 精确");
cp[2] |= 0x80u; /* IV */
n = mk_asdu(a, IEC104_T_C_CS_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, cp, 7u);
feed_i(a, n, now);
CHECK((cap_i(1, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) != 0u),
"TC-016 CP56 IV → PN");
(void)iec104_epoch_ms_to_cp56(e, cp);
s_clock_rc = -1; /* 系统侧拒绝 */
n = mk_asdu(a, IEC104_T_C_CS_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, cp, 7u);
feed_i(a, n, now);
CHECK((cap_i(2, &c) == 0) && ((c.cot_hi & IEC104_COT_BIT_PN) != 0u),
"TC-016 clock_sync 失败 → PN");
}
static void tc_err_resp(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint16_t n, m;
cap_t c;
reset_all(now);
handshake(now);
n = mk_asdu(a, 200u, 1u, IEC104_COT_ACT, 0u, 1u, 0u, NULL, 0u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 200u) && (c.cot == IEC104_COT_UNK_COT)
&& ((c.oa & 0x80u) != 0u), "TC-017 未知类型 COT12+EVI");
m = iec104_asdu_put_hdr(a, IEC104_T_C_IC_NA_1, 1u, IEC104_COT_ACT, 0u, 2u);
a[m] = IEC104_RQT_GROUP1;
m++;
feed_i(a, m, now); /* ca=2 ≠ 1 */
CHECK((cap_i(1, &c) == 0) && (c.cot == IEC104_COT_UNK_CA)
&& ((c.oa & 0x80u) != 0u), "TC-017 错公共地址 COT13+EVI");
}
static void tc_stopdt(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint8_t body[1];
uint16_t n;
reset_all(now);
handshake(now);
feed_u(0x13u, now); /* STOPDT act */
CHECK((cap_u_count(0x23u) == 1)
&& (iec104_link_state(&g_lk) == IEC104_ST_STOPPED), "TC-018 STOPDT con");
body[0] = IEC104_RQT_GROUP1;
n = mk_asdu(a, IEC104_T_C_IC_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, body, 1u);
feed_i(a, n, now);
CHECK(cap_i_count() == 0, "TC-018 STOPPED 态数据服务关");
feed_u(0x43u, now);
CHECK(cap_u_count(0x83u) == 1, "TC-018 STOPPED 态 TESTFR 仍应答");
}
static void tc_seq_err(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint16_t n;
reset_all(now);
handshake(now);
m_ns = 5u; /* 期望 0，投 5 */
n = mk_asdu(a, IEC104_T_C_RD_NA_1, 1u, IEC104_COT_REQ, 0u, 1u, 0x4011u, NULL, 0u);
feed_i(a, n, now);
CHECK(iec104_link_state(&g_lk) == IEC104_ST_IDLE, "TC-019 序号错 → IDLE");
}
static void tc_pts(void)
{
float v;
uint8_t q;
uint8_t d;
reset_all(1000u);
CHECK((iec104_pts_yc_count() == 9u) && (iec104_pts_yx_count() == 33u)
&& (iec104_pts_yc_ioa(8u) == 0x401Du), "TC-020 表尺寸/IOA");
s_f_yc[0] = 7.5f;
CHECK((iec104_pts_yc_read(0u, &v, &q) == 0) && (v == 7.5f) && (q == 0u),
"TC-020 有效 YC");
s_f_yc_rc[1] = -1;
(void)iec104_pts_yc_read(1u, &v, &q);
CHECK((v == 0.0f) && (q == IEC104_QDS_IV), "TC-020 无效通道 IV");
s_f_yc_rc[2] = -2;
(void)iec104_pts_yc_read(2u, &v, &q);
CHECK(q == IEC104_QDS_NT, "TC-020 未就绪 NT");
iec104_pts_yx_read(0u, &d);
CHECK(d == IEC104_DIQ_IV, "TC-020 无效遥信 IV");
CHECK((iec104_pts_yx_is_dp(0u) == 1u) && (iec104_pts_yx_is_dp(4u) == 0u),
"TC-020 is_dp 分界");
s_f_bits = (1uLL << 15);
iec104_pts_yx_read(15u, &d);
CHECK(d == 1u, "TC-020 有效遥信 ON");
}
static void tc_ts_rp(void)
{
uint32_t now = 1000u;
uint8_t a[16];
uint8_t body[2];
uint16_t n;
cap_t c;
reset_all(now);
handshake(now);
body[0] = 0u;
n = mk_asdu(a, IEC104_T_C_TS_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(0, &c) == 0) && (c.type == 104u) && (c.cot == IEC104_COT_ACTCON),
"TC-021 C_TS actcon");
n = mk_asdu(a, IEC104_T_C_RP_NA_1, 1u, IEC104_COT_ACT, 0u, 1u, 0u, body, 1u);
feed_i(a, n, now);
CHECK((cap_i(1, &c) == 0) && (c.type == 105u) && (c.cot == IEC104_COT_ACTCON),
"TC-021 C_RP actcon");
}
static void tc_periodic(void)
{
uint32_t now = 1000u;
cap_t c;
reset_all(now);
handshake(now);
iec104_link_poll(&g_lk, now + 60001u);
CHECK(cap_i_count() == 2, "TC-022 周期上送 2 分片");
CHECK((cap_i(0, &c) == 0) && (c.type == 13u) && (c.cot == IEC104_COT_PERIODIC)
&& (c.ioa == 0x4011u), "TC-022 周期 YC 组 COT=1");
CHECK((cap_i(1, &c) == 0) && (c.ioa == 0x401Du), "TC-022 周期频率点");
}
static void tc_cov_kfull(void)
{
uint32_t now = 1000u;
int i;
cap_t c;
reset_all(now);
handshake(now);
iec104_link_poll(&g_lk, now); /* 先建快照（首 poll 只建不算变位） */
for (i = 0; i < 12; i++) {
feed_rd(now); /* k 窗占满 */
}
s_f_bits |= (1uLL << 14); /* YX15 变位 */
iec104_link_poll(&g_lk, now + 100u);
CHECK(cap_i_count() == 12, "TC-023 k 满时自发发不出");
feed_s(12u, now + 200u); /* 窗开 */
iec104_link_poll(&g_lk, now + 300u);
CHECK((cap_i_count() == 13) && (cap_i(12, &c) == 0) && (c.ioa == 15u)
&& (c.cot == IEC104_COT_SPONT), "TC-023 窗开后补发不丢事件");
}
int main(void)
{
printf("=== IEC104 Protocol Stack Host Tests ===\n");
tc_cp56();
tc_ioa_float();
tc_apci();
tc_startdt();
tc_open_ignore();
tc_interrogation();
tc_cov_yx();
tc_cov_yc();
tc_k_window();
tc_w_thresh();
tc_t2();
tc_t3_t1();
tc_dc();
tc_se();
tc_rd();
tc_cs();
tc_err_resp();
tc_stopdt();
tc_seq_err();
tc_pts();
tc_ts_rp();
tc_periodic();
tc_cov_kfull();
printf("=== IEC104 Tests: %d/%d PASSED (failed=%d) ===\n",
s_passed, s_total, s_failed);
return (s_failed == 0) ? 0 : 1;
}
test/host/iec104/run_unit_test.py
+40
View File
@@ -0,0 +1,40 @@
#!/usr/bin/env python3
# -*- coding: utf-8 -*-
"""IEC 60870-5-104 被控站协议栈（B4）主机侧单元测试运行器（L0.5，纯标准库）。
做什么：用本机 MSVC 离线编译 test/host/iec104/iec104_test.c（#include 纳入
生产源文件 iec104_asdu.c + iec104_pts.c + iec104_link.c，及数据源链接
依赖 prot_set.c + prot_elm.c + phasor.c + sample_ring.c），验证
APCI 重组 / STARTDT 握手 / 总召分片 / COV / k-w-t1~t3 / 遥控与定值两段式 /
C_RD / C_CS / 错误应答（EVI）。
用法（仓库根目录）：
& '.venv\\Scripts\\python.exe' test/host/iec104/run_unit_test.py
退出码：0=PASS / 1=测试失败 / 2=环境错误。
设计依据：docs/子系统设计/IEC104上行设计说明.md §7（测试方案）。
创建日期：2026-10-12
"""
import os
import sys
HERE = os.path.dirname(os.path.abspath(__file__))
ROOT = os.path.dirname(os.path.dirname(os.path.dirname(HERE)))
sys.path.insert(0, os.path.join(ROOT, "test", "host", "common"))
from unit_test_harness import TestBuild, run_host_unit_test # noqa: E402
BUILD = TestBuild(
name="IEC104 Tests",
src=os.path.join(HERE, "iec104_test.c"),
include_dirs=[
os.path.join(ROOT, "App", "algo"),
os.path.join(ROOT, "App", "protocol", "iec104"),
HERE,
],
summary_marker="=== IEC104 Tests:",
)
if __name__ == "__main__":
sys.exit(run_host_unit_test(BUILD))