138 lines
5.7 KiB
C
138 lines
5.7 KiB
C
/******************************************************************************
|
||
* 模块名称：SD2506 RTC Test Suite
|
||
* 模块功能：SD2506API-G RTC 驱动功能自测（黑盒，仅用公共 API）。
|
||
*
|
||
* 历史背景：本驱动曾出现"时间写不进"问题，根因是 sd2506.h 中寄存器宏写成
|
||
* "0x0FH"（H 后缀）。KEIL/ARMCC 不识别 H 整数后缀，将其编译为 0，
|
||
* 导致 SD2506_REG_CTR1 实际等于 0（秒寄存器），sd2506_write_enable()
|
||
* 把 WRTC 写到了错误寄存器，写保护永不解除。修正为 "0x0FU" 后恢复。
|
||
* 详见 docs/SD2506_Trap_Records.md。
|
||
*
|
||
* 当前测试：Phase 1 基本读写（init / 读 / 写 / 回读一致 / 走时），
|
||
* 结束后自动恢复板子原始时间。
|
||
* 入口：sd2506_test_run()（由 StartCh395fTestTask 经 TEST_SUITE_RTC 调度）
|
||
* 创建日期：2026-08-28
|
||
******************************************************************************/
|
||
|
||
#include <string.h>
|
||
#include <stdint.h>
|
||
#include "sd2506_test.h"
|
||
#include "test_config.h"
|
||
#include "cmsis_os.h"
|
||
#include "sd2506.h"
|
||
|
||
#define DBG_TAG "[RTC_TEST]"
|
||
#include "dbg_log.h"
|
||
|
||
#ifdef TEST_SUITE_RTC
|
||
|
||
/* 全局测试统计（宏自动管理） */
|
||
sd2506_test_stats_t g_sd2506_test_stats;
|
||
|
||
/* ===================== Phase 1：基本读写 ===================== */
|
||
#ifdef ENABLE_RTC_BASIC_TESTS
|
||
static void sd2506_phase_basic(void)
|
||
{
|
||
DBG_INFO("=== SD2506 Phase 1: basic read/write (public API) ===");
|
||
|
||
/* TC-RTC-001: init + 读取当前时间 */
|
||
int ret = sd2506_init();
|
||
SD2506_TEST_CHECK(ret == SD2506_OK, "sd2506_init() ret=%d (expect 0)", ret);
|
||
|
||
sd2506_time_t r;
|
||
ret = sd2506_get_time(&r);
|
||
SD2506_TEST_CHECK(ret == SD2506_OK, "sd2506_get_time() ret=%d (expect 0)", ret);
|
||
if (ret == SD2506_OK) {
|
||
DBG_INFO(" current RTC: %04u-%02u-%02u %02u:%02u:%02u wk=%u",
|
||
(unsigned int)r.year, (unsigned int)r.month, (unsigned int)r.day,
|
||
(unsigned int)r.hour, (unsigned int)r.minute,
|
||
(unsigned int)r.second, (unsigned int)r.week);
|
||
}
|
||
|
||
/* TC-RTC-002: 写固定时间，立即回读比对。
|
||
* 若 FAIL -> 先查 sd2506.h 寄存器宏后缀是否为 H（曾因 0x0FH 被 KEIL 编译为 0
|
||
* 导致 SD2506_REG_CTR1 指向秒寄存器、WRTC 写错地址）。详见 docs/SD2506_Trap_Records.md。 */
|
||
sd2506_time_t t;
|
||
t.year = 2026; t.month = 8; t.day = 28; t.hour = 12; t.minute = 0; t.second = 0; t.week = 4;
|
||
ret = sd2506_set_time(&t);
|
||
SD2506_TEST_CHECK(ret == SD2506_OK, "sd2506_set_time() ret=%d (expect 0)", ret);
|
||
|
||
ret = sd2506_get_time(&r);
|
||
SD2506_TEST_CHECK(ret == SD2506_OK, "sd2506_get_time() after set ret=%d (expect 0)", ret);
|
||
if (ret == SD2506_OK) {
|
||
DBG_INFO(" set : %04u-%02u-%02u %02u:%02u:%02u",
|
||
(unsigned int)t.year, (unsigned int)t.month, (unsigned int)t.day,
|
||
(unsigned int)t.hour, (unsigned int)t.minute, (unsigned int)t.second);
|
||
DBG_INFO(" readback: %04u-%02u-%02u %02u:%02u:%02u",
|
||
(unsigned int)r.year, (unsigned int)r.month, (unsigned int)r.day,
|
||
(unsigned int)r.hour, (unsigned int)r.minute, (unsigned int)r.second);
|
||
}
|
||
int match = (r.year == t.year && r.month == t.month && r.day == t.day &&
|
||
r.hour == t.hour && r.minute == t.minute &&
|
||
(r.second == t.second || r.second == ((t.second + 1U) % 60U)));
|
||
SD2506_TEST_CHECK(match, "set==readback (in-session write takes effect)");
|
||
|
||
/* TC-RTC-003: 走时。写后等 3s，应前进约 3 秒 */
|
||
if (ret == SD2506_OK) {
|
||
osDelay(3000);
|
||
sd2506_time_t r2;
|
||
int ret2 = sd2506_get_time(&r2);
|
||
if (ret2 == SD2506_OK) {
|
||
int adv = (r2.second + 60 * (r2.minute + 60 * (r2.hour + 24 * r2.day)))
|
||
- (r.second + 60 * (r.minute + 60 * (r.hour + 24 * r.day)));
|
||
if (adv < 0) adv += 60 * 60 * 24 * 32;
|
||
DBG_INFO(" 3s later: %04u-%02u-%02u %02u:%02u:%02u (advanced %d s)",
|
||
(unsigned int)r2.year, (unsigned int)r2.month, (unsigned int)r2.day,
|
||
(unsigned int)r2.hour, (unsigned int)r2.minute, (unsigned int)r2.second, adv);
|
||
SD2506_TEST_CHECK(adv >= 2 && adv <= 5, "RTC ticking forward (~3s)");
|
||
}
|
||
}
|
||
|
||
SD2506_TEST_REPORT("Phase 1 basic");
|
||
}
|
||
#endif /* ENABLE_RTC_BASIC_TESTS */
|
||
|
||
/* ===================== 套件入口 ===================== */
|
||
void sd2506_test_run(void)
|
||
{
|
||
DBG_INFO("SD2506 test suite started");
|
||
|
||
int ret = sd2506_init();
|
||
SD2506_TEST_CHECK(ret == SD2506_OK, "sd2506_init() ret=%d (expect 0)", ret);
|
||
|
||
/* 信息：读取 CTR1 默认状态（确认 WRTC 初始/可写能力，纯诊断） */
|
||
uint8_t c1 = 0x00U;
|
||
if (sd2506_read_ctr1(&c1) == SD2506_OK) {
|
||
DBG_INFO(" CTR1=0x%02X (WRTC2=CTR1.2=%u WRTC3=CTR1.7=%u)",
|
||
(unsigned int)c1,
|
||
(unsigned int)((c1 >> 2) & 1U),
|
||
(unsigned int)((c1 >> 7) & 1U));
|
||
}
|
||
|
||
/* 记录原始时间，测试结束恢复，避免把板子时间留在测试值 */
|
||
sd2506_time_t orig;
|
||
int have_orig = (sd2506_get_time(&orig) == SD2506_OK);
|
||
if (!have_orig) {
|
||
DBG_INFO(" WARN: cannot read original time; restore step will be skipped");
|
||
}
|
||
|
||
memset(&g_sd2506_test_stats, 0, sizeof(g_sd2506_test_stats));
|
||
|
||
#ifdef ENABLE_RTC_BASIC_TESTS
|
||
sd2506_phase_basic();
|
||
#endif
|
||
|
||
/* 恢复原始时间（用公共 API，写保护逻辑已由 sd2506.c 正确处理） */
|
||
if (have_orig) {
|
||
int r = sd2506_set_time(&orig);
|
||
DBG_INFO(" restored original time (ret=%d)", r);
|
||
}
|
||
|
||
DBG_INFO("SD2506 test suite done");
|
||
for (;;) {
|
||
osDelay(1000);
|
||
}
|
||
}
|
||
|
||
#endif /* TEST_SUITE_RTC */
|