Files
STM32F4-Base/Drivers/BSP/UI/ui_page_registry.h
T
wandering1 515db819ab feat(ui): fold board inputs and outputs into the telemetry page
The 12 board-level rows now live at the end of the 遥信量 page instead of
a separate 开入开出 page: 8 opto inputs (DI_A..DI_H) and 4 relay outputs
(KO6/TRIP/ERT/CLZ). 33 rows become 45, five pages become six. The
standalone page, its menu entry, its golden references and both build
registrations are removed.

Folding the display is not folding the point table. The board rows
render from dio_di_* / dio_do_* and stay out of yx_bits / yx_valid /
yx_dp: any change to those carriers is provably absent from this diff.
IEC 104 mapping and YX_VALID_MASK are untouched, so nothing new is
reported to a master station.

Input polarity was wrong and is fixed here. On this board a 24 V input
drives the opto, which pulls the 74HC165 pin LOW, so the raw mask is
inverted relative to "has signal". The bit assembly only reordered bits;
nothing converted the level. The screen showed 分 on every channel no
matter what the operator drove in. Polarity now converts once, in the
driver, behind IOBOARD_DI_LEVEL_ACTIVE (0 = active low), so callers see
1 = has signal for both inputs and outputs.

Verified on the board: page 5 shows YX33 followed immediately by DI_A,
crossing the 33-point boundary with no drift; DI_C reads 合 because the
operator's signal is on channel C, the other seven read 分; page 6 shows
DI_H then all four outputs 释放. Page rows end at y=134, the footer
starts at y=144.

Input bit order is only partly verified: channel C was confirmed against
a real signal, the other seven have not been exercised channel by
channel. The board detects the presence of 24 V, not contact closure,
and the output rows show the shadow register (our intent) rather than
mechanical contact feedback. All three limits are recorded in the page
header and in the IOBOARD README.

Also adds a polarity guard to the host tests: the input polarity was
flipped once already, and until now no assertion would have caught a
silent re-flip, since only the DO side was pinned.
2026-11-16 23:30:35 +08:00

57 lines
2.3 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters
This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.
/*
* 模块名称:UI 页面注册表头文件(自动生成)
* 模块功能:叶子节点 → 内容页描述符的映射表与查询 API;密码页非节点绑定,单独出口
* 适用平台:STM32F407ZGTx / PC 模拟器(共用源码)
* 作者:王建锋
* 创建日期:2026-10-15
* 自动生成:本文件由 tools/menu_gen/gen_menu.py 从 ui_menu_tree.txt 的 #page= 注记生成,请勿手改。
* 新增一页:菜单树给叶子加 " #page=<模块名>" + 写 ui_page_<模块名>.c,重跑生成器
* (双端注册 uvprojx/CMakeLists 亦由生成器自动写入)
*/
#ifndef UI_PAGE_REGISTRY_H
#define UI_PAGE_REGISTRY_H
#include <stdint.h>
#include "ui_content_page.h"
#ifdef __cplusplus
extern "C" {
#endif
/* 注册表条目:一个绑定了内容页的菜单叶子(表序 = 节点下标升序) */
typedef struct {
uint8_t node; /* 菜单叶子节点下标(g_menu_tab 下标) */
const content_page_def_t *desc; /* 页面描述符(Flash const) */
} ui_page_entry_t;
#define UI_PAGE_MAP_COUNT 31u /* 绑定了内容页的叶子数 */
extern const ui_page_entry_t g_ui_page_map[UI_PAGE_MAP_COUNT];
/*
* 函数功能:查叶子节点绑定的内容页描述符
* 入口参数:node - 菜单叶子节点下标 uint8_t
* 返回值:页面描述符;该叶子未绑定内容页返回 NULL const content_page_def_t *
* 限定条件:node < UI_MENU_TAB_COUNT
* 函数说明:取代旧 ui_menu.c 手写 case 分发——映射的唯一真源是 ui_menu_tree.txt,
* 表序变化不会造成"下标硬编码错位"(线性扫描:绑定页是个位数量级)
*/
const content_page_def_t *ui_page_registry_for(uint8_t node);
/*
* 函数功能:取密码页描述符(需密码叶子统一进这一页)
* 入口参数:无
* 返回值:密码页描述符;菜单树未声明 @password 指令时返回 NULL const content_page_def_t *
* 限定条件:无
* 函数说明:密码页**不是**节点绑定的(任何 #P 叶子都进同一页),故不进 node→desc 映射,
* 由本接口单独出口;取值来自 ui_menu_tree.txt 的 `# @password=<模块名>` 指令
*/
const content_page_def_t *ui_page_registry_password(void);
#ifdef __cplusplus
}
#endif
#endif /* UI_PAGE_REGISTRY_H */