2b466b85f0
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.
Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:
defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
→ ioboard_di_snap_lookup() [new registration channel]
→ ui_data_feed_tick() (uiTask, 200 ms)
→ ui_data_rt_t.dio_di_* / dio_do_*
No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).
Semantic honesty, recorded in ui_page_di_do.c and README §6:
· Output state is the software shadow register (ODR mirror), NOT a
mechanical contact feedback — this platform has no auxiliary contact
readback path. ioboard_do_read_level() also reads ODR, so comparing
the two is tautological.
· IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
schematic.
· Input bit order has not been verified by manual shorting. The
2026-11-16 run read 0x00 eight times because the operator had no time
to short each channel — the data path itself was fine.
· Board-level inputs are deliberately kept out of the 33-point telemetry
bitmap (IEC 104 point-table semantics); the two have no mapping.
Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.
Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.
Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.
Reviewed independently; zero blocking findings.
Drivers/BSP/ — 板级支持包(纯手工自研代码)
本目录全部为手工编写的板级驱动与中间层(非 CubeMX 生成、非第三方库、非 ST HAL)。 每个芯片/子模块一个子目录。改驱动前必读对应模块的 Trap Records(见下)。
子模块一览
| 目录 | 芯片/模块 | 接口 | 职责 | 关键文档 |
|---|---|---|---|---|
CH395F/ |
CH395F 以太网控制器 | SPI2 | 以太网 MAC/PHY 控制器底层驱动 | docs/问题记录/CH395F_Trap_Records.md |
GD5F2GQ5UE/ |
GD5F2GQ5UE SPI NAND | SPI1 | NAND 驱动 + FTL(nand_ftl.c) |
docs/问题记录/GD5F2GQ5UE_Trap_Records.md |
TPAFE5160/ |
TPAFE5160 高精度 ADC | 并行 16 位 | ADC 采样驱动(CONVST/BUSY 时序) | — |
SD2506/ |
SD2506 RTC | I2C | 实时时钟驱动 | docs/问题记录/SD2506_Trap_Records.md |
RS485/ |
RS-485 半双工 | UART5 | 收发方向控制(DE 引脚)+ 时序 | — |
NET/ |
BSD Socket 网络抽象层 | — | Socket API + select + 轻量 FTP 服务器 | docs/网络/(含 Net层阻塞模型架构设计.md) |
NETCFG/ |
网络配置 | — | /config.ini 网络段的加载/保存 |
docs/子系统设计/网络配置说明.md |
UI/ |
LVGL UI 组件 | — | 菜单/内容页/组件/中文字体 | docs/UI设计/ |
根级文件
| 文件 | 作用 |
|---|---|
dbg_log.h |
调试日志宏(DBG_INFO 等),编译期开关 |
dbg_cfg.h |
调试配置项 |
app_assert.h |
模块级轻量断言宏(APP_ASSERT):编译期两态裁剪(默认关闭 = 零符号零开销;打开态与 configASSERT 共用同一个失败钩子)。试点见 Drivers/BSP/NET/net_socket.c |
子模块 README
NET/README.md— 网络抽象层(Socket / select / FTP)UI/README.md— LVGL UI 组件
⚠️ 改驱动前必读(踩坑速查)
| 模块 | 陷阱 |
|---|---|
| CH395F | SPI 事务须 ch395f_spi_begin()/end() 包裹;分频系数必须为 8(PCB 约束,勿"优化");快速复连会因事件被读清消费致监听死亡(TRAP-NET-17 已修,E14 复核:非芯片丢事件);上传中止后首笔复连截断(TRAP-NET-18 已修) |
| GD5F2GQ5UE | FatFs 移植版打开模式陷阱(FA_OPEN_APPEND 不含写位);文件名严格 8.3 短名、不得以点开头;f_write 簇分配失败返 FR_OK + 短写,须校验字节数 |
| NET | 就绪屏障位必须 osFlagsNoClear;s_net_errno 已按任务隔离(勿改回全局) |
| 通用 | 自研代码禁用 C 库堆分配(MicroLIB 堆仅 512 B),动态内存只用 pvPortMalloc/vPortFree |
完整平台约束的落点:隔离与错误码语义 →
.dsh/roles/network-specialist.md(网络)/.dsh/roles/storage-specialist.md(存储);中断与吞吐细节 →docs/网络/网络自愈架构设计.md、docs/架构设计/STM32F4-Base存储架构说明.md;C 库堆禁令 →docs/门禁说明/coding-standard.md。另见各模块的 Trap Records。
相关文档
- 架构全景:
docs/架构设计/项目架构总览.md - 存储栈:
docs/架构设计/STM32F4-Base存储架构说明.md - 测试指南:
docs/测试说明/板级测试/*_Test_Guide.md