Files
STM32F4-Base/Drivers/BSP/UI
wandering1 2b466b85f0 feat(ui): add DI/DO status page showing 8 inputs and 4 outputs
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.

Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:

  defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
    → ioboard_di_snap_lookup()  [new registration channel]
    → ui_data_feed_tick() (uiTask, 200 ms)
    → ui_data_rt_t.dio_di_* / dio_do_*

No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).

Semantic honesty, recorded in ui_page_di_do.c and README §6:
  · Output state is the software shadow register (ODR mirror), NOT a
    mechanical contact feedback — this platform has no auxiliary contact
    readback path. ioboard_do_read_level() also reads ODR, so comparing
    the two is tautological.
  · IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
    schematic.
  · Input bit order has not been verified by manual shorting. The
    2026-11-16 run read 0x00 eight times because the operator had no time
    to short each channel — the data path itself was fine.
  · Board-level inputs are deliberately kept out of the 33-point telemetry
    bitmap (IEC 104 point-table semantics); the two have no mapping.

Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.

Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.

Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.

Reviewed independently; zero blocking findings.
2026-11-16 21:45:08 +08:00
..
2026-09-09 17:15:04 +08:00
2026-09-10 11:36:33 +08:00

Drivers/BSP/UI/ — LVGL UI 组件

基于 LVGL 的界面实现:菜单树、内容页、通用组件、中文字库、待机页。 与 PC 模拟器共用同一套 UI 源码(simulator/ 只提供平台层)。

结构

核心 / 框架

文件 作用
ui_port.c/h LVGL 移植层:显示驱动、输入设备、tick 注册
ui_menu.c/h 菜单框架(树结构与导航)
ui_menu_view.c/h 菜单视图渲染
ui_menu_tab.c/h 页签组件
ui_deco.c/h 界面装饰元素(图标、边框等)
ui_standby.c/h 待机页
ui_pwd_def.h 密码页默认值定义
ui_font_cn_12.c 中文字库(由 tools/font_gen/ 生成,勿手改)

内容页

文件 作用
ui_content_page.c/h 内容页框架
ui_page_ac.c/h 交流量页
ui_page_dc.c/h 直流量页
ui_page_device_info.c/h 设备信息页
ui_page_net_cfg.c/h 网口设置页
ui_page_password.c/h 密码页
ui_page_runlog.c/h 运行日志页
ui_page_selftest.c/h 自检页

数据汇入(推流)

文件 作用
ui_net_sink.c/h 远端显示总线(RemoDispBus)数据汇入口
ui_net_sink_backend.h 后端抽象接口(MCU / 模拟器分别实现)
ui_net_sink_backend_mcu.c MCU 端后端实现

⚠️ 编码注意(本目录含中文字符串)

  • 本目录文件带 UTF-8 BOM(.c 内含中文字符串字面量,BOM 使 ARMCC 按 UTF-8 解码)
  • Edit 工具会剥掉 BOM:改完必须核对并按原样补回 3 字节 EF BB BF, 否则 ARMCC 改按 CP936 解读 → #870-D: invalid multibyte character sequence
  • UI 改动一律走 ui-verify skill 五步门禁
  • 含新汉字的文案提交前先跑 font-regen skill 重生成 ui_font_cn_12.c

相关文档

  • UI 架构:docs/UI设计/UI_设计架构.md
  • 菜单设计:docs/UI设计/菜单页面设计.md、docs/UI设计/内容页架构.md
  • 字体:docs/UI设计/UI_中文字体生成与配置.md
  • 模拟器:docs/UI设计/LVGL模拟器部署与使用说明.md
  • 自动化测试:docs/UI设计/UI_自动化测试流程.md
  • 协议:docs/UI设计/RemoDispBus协议与接收设计说明.md