Files
STM32F4-Base/App/task
wandering1 2b466b85f0 feat(ui): add DI/DO status page showing 8 inputs and 4 outputs
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.

Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:

  defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
    → ioboard_di_snap_lookup()  [new registration channel]
    → ui_data_feed_tick() (uiTask, 200 ms)
    → ui_data_rt_t.dio_di_* / dio_do_*

No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).

Semantic honesty, recorded in ui_page_di_do.c and README §6:
  · Output state is the software shadow register (ODR mirror), NOT a
    mechanical contact feedback — this platform has no auxiliary contact
    readback path. ioboard_do_read_level() also reads ODR, so comparing
    the two is tautological.
  · IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
    schematic.
  · Input bit order has not been verified by manual shorting. The
    2026-11-16 run read 0x00 eight times because the operator had no time
    to short each channel — the data path itself was fine.
  · Board-level inputs are deliberately kept out of the 33-point telemetry
    bitmap (IEC 104 point-table semantics); the two have no mapping.

Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.

Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.

Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.

Reviewed independently; zero blocking findings.
2026-11-16 21:45:08 +08:00
..

App/task/ — FreeRTOS 任务实现

6 个任务的入口函数与任务体。任务创建在 Src/freertos.c(MX_FREERTOS_Init), 栈大小/优先级的唯一事实源也是 Src/freertos.c;本目录只放任务实现。

任务清单

文件 任务 优先级 职责
default_task.c/h defaultTask Normal FTL + FatFS 挂载、配置引擎属主、syslog 唯一写者、LED 指示
net_task.c/h netTask Normal net_stack_bring_up → 置 NET_READY → 循环 net_poll + net_process_messages
ui_task.c/h uiTask BelowNormal LVGL 界面(菜单 / 内容页 / 待机)+ 推流
adc_task.c/h adcTask AboveNormal ADC 采集消费:TPAFE5160 快照 + 消费 STM32 ADC1 DMA 乒乓缓冲一帧,经 ../algo/adc_input.c 按语义取数(采样节拍由 TIM3 硬件触发)
rs485_task.c/h (RS-485 任务) — 半双工 RS-485 协议通信
../sync/time_sync.c timeSyncTask Normal 墙钟时间同步(实现不在本目录,见 ../sync/README.md)

上表栈大小/优先级以 Src/freertos.c 为准(README.md 的任务表由 scripts/gen_task_table.py 生成,勿手抄)。

就绪屏障(重要)

任务间不用魔法延时,改用 App/app/sys_events.h 的 Event Flags:

  • SYS_EVT_NET_READY / SYS_EVT_STORAGE_READY 等是状态位——等待时必须 osFlagsWaitAny|osFlagsNoClear,不能用默认消费型等待(否则先到的消费者会清掉位, 导致 ftpTask 的 WaitAll(两位) 永不成立 → FTP 静默不监听)
  • SYS_EVT_CFG_SAVE / SYS_EVT_NET_RECONFIG 等命令位保持消费型等待

平台约束(改本目录前必读)

  • 内核启动前禁止任何 FreeRTOS/CMSIS-RTOS API 调用(osMessageQueueNew 等会杀死启动)
  • 就绪屏障位一律用 osFlagsNoClear
  • 内存预算紧张,改栈/缓冲前先核算(docs/内存管理/)

相关文档

  • 启动顺序与屏障:docs/架构设计/项目启动顺序管理.md
  • 内存与定栈规则:docs/内存管理/RAM使用分析与优化方案.md
  • 栈水位实测:scripts/stack_report.py