6e0755f971
KO_24V (PF4, bit6) is not an externally controllable output: it feeds the other KO channels, so the driver now asserts it automatically whenever any relay-class channel (bit0/1/2/3/7/8) is attracted, and never for the three LED channels (bit4/5/9). Externally controllable outputs become 9; physical bit map, DO_COUNT=10, DO_MASK_ALL=0x03FF, k_do_pin[] binding, per-port BSRR segments and the uint16_t path are unchanged. - ioboard_do_write: clear the caller's bit6, synthesize it from IOBOARD_DO_RELAY_MASK (0x18F), then one shadow store + one apply, so bit6 changes in the same BSRR write as its GPIOF neighbours. - ioboard_do_get: bit6 now reports the actual 24V supply state, not an echo of the caller's write. Power-on release keeps PF4 low. - board test Phase 3 derives expectations from RELAY_MASK (no second truth table); the KO_24V row exercises "write ignored" and a new auto-24V check verifies set-on-relay / drop-on-release. - host contract test pins RELAY_MASK membership (excludes bit6 and LED bits, union fills 0x3FF); 131/131 passed. - docs: sync note v1.4 + BSP README unify the semantics (9 controllable + auto supply enable); stale "10 controllable" and "24V interlock not implemented" wording removed; netlist-unknown routing, PC15 backup-domain 3 mA limit and the missing auxiliary contact remain documented as open facts. Verified: Keil rebuild 0 error 0 warning (sizes identical to parent wave), host unit tests 131/131, check_bsp_err / check_doc_links / git diff --check clean. Board Phase 3 still needs a bench run.