Files
STM32F4-Base/App/task
wandering1 10323c4c22 feat(ioboard): board test suite for DI/DO, fix default_task conditional compile
Bench verification of the IO board needs an observation window: production
build has no consumer of ioboard_di_snap_read(), so the DI values were
invisible. Add TEST_SUITE_IOBOARD as a semi-automatic bench sequence and fix
two real bugs found while wiring it in.

New files:
- test/board/ioboard_test.h, test/board/ioboard_test_task.c

Test suite:
- Owns its own thread (iobTest, 4096 words) instead of running in testTask:
  testTask is osPriorityBelowNormal, below defaultTask whose 1ms console
  drain loop can starve a blocking wait in a lower priority context.
- Phases: bit-order self-check, DI eight-point bijection, DO point-by-point
  toggle with operator confirmation, release-all on every exit path.
- Only exit is ioboard_release_all(); it is called from the entry guard,
  every phase failure, the write-failure branch and the thread tail.
- Sample window is 20 reads x 2ms = 40ms and does overlap the 50ms
  production poll. That is stated as harmless in the header: the driver
  wraps the whole read in taskENTER_CRITICAL (26us, not the whole 40ms),
  both sides only read, and a torn cross-reader sample is caught by the
  debounce layer rather than acted upon.

default_task.c fix:
- DEFAULT_TASK_DI_PUBLISH_EN was defined twice: once at file scope and once
  inside default_task_func(). #define has no scope, so the second was a
  redefinition of the first. Collapsed to a single authoritative site.
- Add TEST_SUITE_STORAGE to the disable list: the STORAGE suite owns the
  file system via testTask, and default_task_di_poll() referenced four
  statics that live inside an !TEST_SUITE_STORAGE block, which broke the
  STORAGE build with 11 errors.
- Shrink the !TEST_SUITE_STORAGE block to cover only
  default_task_net_cfg_save_notify() and move the three declarations out;
  move edges/fails into the #else branch so the empty branch references
  none of the four statics.

Registration and gates:
- MDK-ARM/STM32F407-Demo.uvprojx and simulator/CMakeLists.txt entries.
- scripts/check_test_suite.py: whitelist TEST_SUITE_IOBOARD.
- scripts/stack_report.py: let a self-started thread that is not declared in
  Src/freertos.c osThreadAttr_t still be budget checked.
- test/run_all_suites.py: bring the suite into the orchestrator view.

Verified: six-build matrix all 0 errors 0 warnings. CH395F/STORAGE/GD5F/RTC
and the product build are bit-identical at Code=257936; the IOBOARD build is
Code=264640 (+6704), which is the evidence that the suite really enters the
image. Host unit tests 100/100, stack report 1760/4096 words (57%).
2026-11-16 19:35:15 +08:00
..

App/task/ — FreeRTOS 任务实现

6 个任务的入口函数与任务体。任务创建在 Src/freertos.c(MX_FREERTOS_Init), 栈大小/优先级的唯一事实源也是 Src/freertos.c;本目录只放任务实现。

任务清单

文件 任务 优先级 职责
default_task.c/h defaultTask Normal FTL + FatFS 挂载、配置引擎属主、syslog 唯一写者、LED 指示
net_task.c/h netTask Normal net_stack_bring_up → 置 NET_READY → 循环 net_poll + net_process_messages
ui_task.c/h uiTask BelowNormal LVGL 界面(菜单 / 内容页 / 待机)+ 推流
adc_task.c/h adcTask AboveNormal ADC 采集消费:TPAFE5160 快照 + 消费 STM32 ADC1 DMA 乒乓缓冲一帧,经 ../algo/adc_input.c 按语义取数(采样节拍由 TIM3 硬件触发)
rs485_task.c/h (RS-485 任务) — 半双工 RS-485 协议通信
../sync/time_sync.c timeSyncTask Normal 墙钟时间同步(实现不在本目录,见 ../sync/README.md)

上表栈大小/优先级以 Src/freertos.c 为准(README.md/AGENTS.md 的任务表由 scripts/gen_task_table.py 生成,勿手抄)。

就绪屏障(重要)

任务间不用魔法延时,改用 App/app/sys_events.h 的 Event Flags:

  • SYS_EVT_NET_READY / SYS_EVT_STORAGE_READY 等是状态位——等待时必须 osFlagsWaitAny|osFlagsNoClear,不能用默认消费型等待(否则先到的消费者会清掉位, 导致 ftpTask 的 WaitAll(两位) 永不成立 → FTP 静默不监听)
  • SYS_EVT_CFG_SAVE / SYS_EVT_NET_RECONFIG 等命令位保持消费型等待

平台约束(改本目录前必读)

  • 内核启动前禁止任何 FreeRTOS/CMSIS-RTOS API 调用(osMessageQueueNew 等会杀死启动)
  • 就绪屏障位一律用 osFlagsNoClear
  • 内存预算紧张,改栈/缓冲前先核算(docs/内存管理/)

相关文档

  • 启动顺序与屏障:docs/架构设计/项目启动顺序管理.md
  • 内存与定栈规则:docs/内存管理/RAM使用分析与优化方案.md
  • 栈水位实测:scripts/stack_report.py