1073 lines
66 KiB
C
1073 lines
66 KiB
C
/*
|
||
* 104子站示例：总召、计数量召唤、时钟同步、45/46遥控、模拟点表及main。
|
||
* 两种召唤共用IEC104_Interrogation.c状态机，各自有独立实例和业务事件。
|
||
* 每轮Slave_Poll -> NextEvent逐条交付 -> Command_Process及应用交互 -> 召唤/校时；所有调用串行。
|
||
* 总召每批4点，模块自动推进至需要等待；8个单点遥信、8个双点遥信和8个遥测组成8个响应ASDU。
|
||
* QOI=21读取单点及双点遥信，22只读遥测，其余分组由应用拒绝；分组点表策略不写进协议库。
|
||
* 同一连接至多一个未终结总召，忙时不区分QOI均否定；任务满时拒绝/计数丢弃新请求，保留当前连接。
|
||
* 总召模块处理WAIT、STOPDT及断线；应用读取业务事件，选择类型并显式交付ASDU。
|
||
* 计数量使用8个模拟计数器；读取快照，冻结/复位由经过事件校验的同步动作入口执行。
|
||
* 对时默认只更新模拟UTC基准；--clock system显式选择实际时钟，协议仍使用单调时钟。
|
||
* 遥控默认先选择后执行，同一实例只占一个事务；设备结果、返回信息和Complete分步推进，WAIT保留当前步骤。
|
||
* 模拟输出同步更新点值；FINISHED只清理返校/输出标志，不恢复已执行的点值，也不代表真实设备已经空闲。
|
||
* 不支持的其他命令当场提交COT=44否定应答，复用发送层HIGH；容量不足只丢本条并计数。
|
||
* 默认127.0.0.1:2404、CA=1；构建命令见同目录README.md。
|
||
*/
|
||
#include "IEC104_Interrogation.h"
|
||
#include "IEC104_CounterInterrogation.h"
|
||
#include "IEC104_ClockSynchronization.h"
|
||
#include "IEC104_Command.h"
|
||
#include "IEC60870_Clock.h"
|
||
#include <stdio.h>
|
||
#include <stdlib.h>
|
||
#include <string.h>
|
||
|
||
#define EXAMPLE_EVENT_BUDGET 32U
|
||
#define EXAMPLE_COUNTER_COUNT 8U
|
||
|
||
/* 模拟遥信点表：ioa为24位信息对象地址，value为0/1，quality为SIQ品质位（这里均为0）。
|
||
* 表项不是线上报文，后续由SinglePointInformation_Create及ASDU容器编码成Type=1。
|
||
* 此表提供地址、初值和品质；运行值保存在各ExampleApp中，遥控与总召共用同一数据源。 */
|
||
static const struct { uint32_t ioa; uint8_t value, quality; } example_signals[] = {
|
||
{1001, 0, 0}, {1002, 1, 0}, {1003, 0, 0}, {1004, 1, 0},
|
||
{1005, 1, 0}, {1006, 0, 0}, {1007, 1, 0}, {1008, 0, 0}
|
||
};
|
||
/* 模拟遥测点表：ioa为信息对象地址，value为原始有符号16位标度值，quality为QDS品质位。
|
||
* 编码为不带时标的Type=11；本示例不定义物理单位和倍率，负数也按有符号值传输。 */
|
||
static const struct { uint32_t ioa; int16_t value; uint8_t quality; } example_measurements[] = {
|
||
{2001, 2300, 0}, {2002, 2310, 0}, {2003, 2290, 0}, {2004, 5000, 0},
|
||
{2005, -125, 0}, {2006, 0, 0}, {2007, 1234, 0}, {2008, 42, 0}
|
||
};
|
||
/* 点数直接取数组长度；分批游标使用size_t，不另维护可能与点表不一致的手写数量。 */
|
||
#define EXAMPLE_SIGNAL_COUNT (sizeof(example_signals) / sizeof(example_signals[0]))
|
||
#define EXAMPLE_MEASUREMENT_COUNT (sizeof(example_measurements) / sizeof(example_measurements[0]))
|
||
|
||
|
||
/* 当前取数站的应用游标；首个NEED_DATA才初始化，协议库不登记或冻结业务IOA列表。 */
|
||
typedef struct { size_t single_index, double_index, scaled_index; } ExampleGiData;
|
||
|
||
typedef struct {
|
||
IEC104_Slave_t *slave; /* main拥有；本上下文仅借用。 */
|
||
IEC104_Station_t station; /* 应用拥有的固定地址站点节点，供各业务共用CA和context。 */
|
||
IEC104_Interrogation_t *interrogation; /* 库内不透明总召任务对象。 */
|
||
IEC104_InterrogationStatus_t gi; /* 只读快照，用于调度等待及统计。 */
|
||
IEC104_Interrogation_t *counter; /* 独立计数量实例，与总召共用Slave，不共用任务和广播状态区。 */
|
||
IEC104_InterrogationStatus_t ci; /* 计数量调度及统计快照，每次推进后重新查询。 */
|
||
IEC104_ClockSynchronization_t *clock; /* 独立时钟同步模块，共用Slave及站点表。 */
|
||
IEC104_ClockSynchronizationStatus_t cs; /* 对时执行、确认及期限的只读快照。 */
|
||
IEC104_Command_t *command; /* CLI启用；仅总召的旧测试可以不创建遥控实例。 */
|
||
IEC104_CommandStatus_t command_status; /* 推进后/等待前刷新；计时、通知和应答状态只供调度及统计。 */
|
||
IEC104_CommandEvent_t command_event; /* 工作事件可跨WAIT保留，执行收尾继续使用原EXECUTE身份。 */
|
||
IEC104_Station_t *command_station; /* 应用额外引用：首个工作事件先Acquire，再保存context；FINISHED后Release。 */
|
||
uint64_t command_instance, command_transaction; /* 保留事务归属；SELECT/EXECUTE共用，FINISHED须先核对再清理。 */
|
||
/* pending仅表示工作事件尚待Accept/Reject；waiting表示上次接口WAIT，避免把待重试状态当作可立即推进。
|
||
* selected/output是模拟返校及输出的副作用标志，不代替协议阶段；真实设备忙状态应独立维护。 */
|
||
bool command_pending, command_waiting, command_selected, command_output;
|
||
unsigned command_step; /* 0等待事件/终结，1报告设备结果，2返回信息，3关闭返回阶段。 */
|
||
IEC60870_Asdu_t command_return; /* 借用下面的固定缓冲；WAIT未接手，必须连同事件保留到OK或STALE。 */
|
||
uint8_t command_return_bytes[10]; /* 单个Type1/3对象，WAIT保持原文，不借用总召缓冲。 */
|
||
/* 单点及双点运行值由遥控更新，总召与遥信分组均读取同一数组的当前值。
|
||
* 单点命令6001..6008对应遥信1001..1008，双点命令6101..6108对应遥信1101..1108；FINISHED不重置运行值。 */
|
||
uint8_t signal_values[EXAMPLE_SIGNAL_COUNT], double_values[EXAMPLE_SIGNAL_COUNT];
|
||
bool clock_system, clock_valid; /* 实际设时为显式选项；clock_valid只描述模拟基准。 */
|
||
uint64_t clock_utc_ms, clock_base_ms; /* 模拟UTC毫秒及其单调基准，不影响协议计时。 */
|
||
IEC104_InterrogationEvent_t counter_event; /* WAIT时保留的原业务事件，重试不能换成新身份。 */
|
||
bool counter_pending, counter_first; /* 是否持有待应答事件、本轮是否先推进计数量。 */
|
||
int32_t counter_current[EXAMPLE_COUNTER_COUNT]; /* 模拟当前累计值，冻结及复位动作的数据源。 */
|
||
IEC60870_BinaryCounterReading_t counter_frozen[EXAMPLE_COUNTER_COUNT]; /* 最近冻结值及BCR序号、品质。 */
|
||
IEC60870_BinaryCounterReading_t counter_snapshot[EXAMPLE_COUNTER_COUNT]; /* 本轮读取固定的冻结副本。 */
|
||
size_t counter_cursor, counter_end; /* 当前读取区间，只有Submit_Batch成功才推进游标。 */
|
||
uint64_t counter_instance, counter_request; /* 快照归属；旧FINISHED不得清理新请求。 */
|
||
IEC104_Station_t *counter_station; /* 读取期间额外持有的原站节点，结束后归还引用。 */
|
||
unsigned long counter_completed; /* 已消费的COMPLETED通知数，包含读取及冻结/复位。 */
|
||
ExampleGiData gi_data; /* 应用拥有的游标，库内没有session或回调参数。 */
|
||
IEC104_Station_t *gi_station; /* 取数期间持有原站，Complete_Data或FINISHED时释放。 */
|
||
uint64_t session_instance, session_request; /* 只清理对应请求的遍历状态及业务资源。 */
|
||
IEC104_InterrogationEvent_t business_event; /* 纯值，可保存到后续循环应答。 */
|
||
bool business_pending;
|
||
int batch_result; /* 本例构造结果：-1失败、0数据结束、1有数据。 */
|
||
IEC60870_Asdu_t batch; /* 借用本应用bytes；Submit_Batch(OK)后可复用。 */
|
||
uint8_t batch_bytes[IEC104_MAX_ASDU_LEN];
|
||
bool events_pending;
|
||
unsigned long other_submitted, other_rejected, other_cancelled, other_overloads;
|
||
} ExampleApp;
|
||
|
||
/* 普通应用函数，只由下面的事件分支直接调用，不注册到库中。
|
||
* 应用自行选择本批IOA、类型及分组成员；为NEED_DATA构造一种类型的一批。
|
||
* 真实取值应放在下列逐点组包处，值与品质的读取一致性由数据源保证；不预读整轮数据。
|
||
* FULL不跳过当前点；本函数不推进持久游标，Submit_Batch(OK)后才推进。
|
||
* WAIT仅保留事件，每次重试重读当前值。点值更新/突发发布与本次组包/提交须串行协调。
|
||
* 逐批取值不保证整轮同一采样时刻。 */
|
||
static int Example_Build_Batch(ExampleApp *app, const IEC104_InterrogationRequest_t *request)
|
||
{
|
||
ExampleGiData *data = &app->gi_data;
|
||
IEC60870_Asdu_t *asdu = &app->batch;
|
||
IEC60870_AsduHeader_t header;
|
||
IEC104_Station_t *station = request->station_id != 0U ?
|
||
IEC104_Slave_Get_Station_By_Id(app->slave, request->station_id) :
|
||
IEC104_Slave_Get_Station(app->slave, request->common_address);
|
||
if (IEC104_Station_Get_Context(station) != app) {
|
||
return -1;
|
||
}
|
||
memset(&header, 0, sizeof(header));
|
||
header.cause_of_transmission = request->qualifier; /* 站总召20，分组总召21..36。 */
|
||
header.common_address = request->common_address;
|
||
header.originator_address = request->originator_address;
|
||
header.is_test = request->is_test;
|
||
if (IEC60870_Asdu_Create(asdu, IEC104_Slave_Get_Application_Layer_Parameters(app->slave),
|
||
app->batch_bytes, sizeof(app->batch_bytes), &header, 0) != IEC60870_ASDU_OK) { return -1; }
|
||
if (data->single_index < EXAMPLE_SIGNAL_COUNT) {
|
||
size_t index = data->single_index;
|
||
while (index < EXAMPLE_SIGNAL_COUNT && asdu->object_count < request->max_objects_per_asdu) {
|
||
IEC60870_SinglePointInformation_t point;
|
||
IEC60870_AsduResult_t added;
|
||
if (IEC60870_SinglePointInformation_Create(&point, example_signals[index].ioa,
|
||
app->signal_values[index], example_signals[index].quality) != IEC60870_ASDU_OK) {
|
||
return -1;
|
||
}
|
||
added = IEC60870_Asdu_Add_InformationObject(asdu, &point.object);
|
||
if (added == IEC60870_ASDU_FULL) { break; }
|
||
if (added != IEC60870_ASDU_OK) { return -1; }
|
||
++index;
|
||
}
|
||
} else if (data->double_index < EXAMPLE_SIGNAL_COUNT) {
|
||
size_t index = data->double_index;
|
||
while (index < EXAMPLE_SIGNAL_COUNT && asdu->object_count < request->max_objects_per_asdu) {
|
||
IEC60870_DoublePointInformation_t point;
|
||
IEC60870_AsduResult_t added;
|
||
if (IEC60870_DoublePointInformation_Create(&point, (uint32_t)(1101U + index),
|
||
app->double_values[index], 0U) != IEC60870_ASDU_OK) { return -1; }
|
||
added = IEC60870_Asdu_Add_InformationObject(asdu, &point.object);
|
||
if (added == IEC60870_ASDU_FULL) { break; }
|
||
if (added != IEC60870_ASDU_OK) { return -1; }
|
||
++index;
|
||
}
|
||
} else if (data->scaled_index < EXAMPLE_MEASUREMENT_COUNT) {
|
||
size_t index = data->scaled_index;
|
||
while (index < EXAMPLE_MEASUREMENT_COUNT && asdu->object_count < request->max_objects_per_asdu) {
|
||
IEC60870_MeasuredValueScaled_t point;
|
||
IEC60870_AsduResult_t added;
|
||
if (IEC60870_MeasuredValueScaled_Create(&point, example_measurements[index].ioa,
|
||
example_measurements[index].value, example_measurements[index].quality) != IEC60870_ASDU_OK) {
|
||
return -1;
|
||
}
|
||
added = IEC60870_Asdu_Add_InformationObject(asdu, &point.object);
|
||
if (added == IEC60870_ASDU_FULL) { break; }
|
||
if (added != IEC60870_ASDU_OK) { return -1; }
|
||
++index;
|
||
}
|
||
} else { return 0; }
|
||
return asdu->object_count != 0U ? 1 : -1;
|
||
}
|
||
|
||
/* 释放应用为当前取数持有的节点引用并清空游标，库的广播状态区仍独立保存协议进度。
|
||
* Complete_Data成功即可调用，让下一站复用游标；不需要等本轮所有站的FINISHED。 */
|
||
static bool Example_End_Data(ExampleApp *app)
|
||
{
|
||
if (app->gi_station != NULL &&
|
||
IEC104_Slave_Release_Station(app->slave, app->gi_station) != IEC104_STATION_OK) { return false; }
|
||
app->gi_station = NULL;
|
||
memset(&app->gi_data, 0, sizeof(app->gi_data));
|
||
app->session_instance = app->session_request = 0U;
|
||
return true;
|
||
}
|
||
|
||
/* 第二条事件流：应用主动取业务事件，再显式应答；没有库调用应用函数的路径。
|
||
* 常量点表立即就绪；异步数据源可在NEED_DATA保留business_event，完成采样后再Submit。
|
||
* WAIT先处理Slave通知并推进网络，下次重取数据；STALE表示交互已失效，不重试过期事件。 */
|
||
static bool Example_Drain_Business(ExampleApp *app)
|
||
{
|
||
unsigned count;
|
||
for (count = 0U; count < EXAMPLE_EVENT_BUDGET; ++count) {
|
||
IEC104_InterrogationEvent_t *event = &app->business_event;
|
||
IEC104_InterrogationReplyResult_t reply;
|
||
if (!app->business_pending) {
|
||
IEC104_InterrogationNextResult_t next = IEC104_Interrogation_NextEvent(app->interrogation, event);
|
||
if (next == IEC104_INTERROGATION_NEXT_EMPTY) { return true; }
|
||
if (next != IEC104_INTERROGATION_NEXT_READY) { return false; }
|
||
app->business_pending = true;
|
||
}
|
||
switch (event->type) {
|
||
case IEC104_INTERROGATION_BEGIN: {
|
||
bool accept = event->request.qualifier <= 22U;
|
||
/* 示例仅定义组1=单点及双点遥信、组2=遥测；拒绝未配置的组。协议库支持全部16组。
|
||
* 广播会先交付所有站的BEGIN；这里只作准入判断，不占用唯一取数游标。 */
|
||
reply = IEC104_Interrogation_Reply_Begin(app->interrogation, event, accept);
|
||
break;
|
||
}
|
||
case IEC104_INTERROGATION_NEED_DATA:
|
||
/* 广播逐站取数，因此首个NEED_DATA才建立游标；用注册编号取得原站，避免同CA替换串站。
|
||
* 应用单独Acquire，确保库交付FINISHED并归还自己的引用时，应用清理仍有有效节点。 */
|
||
if (event->request_id != app->session_request || event->instance_id != app->session_instance) {
|
||
if (app->session_request != 0U) { return false; }
|
||
if (event->request.station_id != 0U) {
|
||
app->gi_station = IEC104_Slave_Get_Station_By_Id(app->slave, event->request.station_id);
|
||
if (app->gi_station == NULL ||
|
||
IEC104_Slave_Acquire_Station(app->slave, app->gi_station) != IEC104_STATION_OK) { return false; }
|
||
}
|
||
memset(&app->gi_data, 0, sizeof(app->gi_data));
|
||
if (event->request.qualifier == 21U) { app->gi_data.scaled_index = EXAMPLE_MEASUREMENT_COUNT; }
|
||
if (event->request.qualifier == 22U) {
|
||
app->gi_data.single_index = EXAMPLE_SIGNAL_COUNT;
|
||
app->gi_data.double_index = EXAMPLE_SIGNAL_COUNT;
|
||
}
|
||
app->session_instance = event->instance_id;
|
||
app->session_request = event->request_id;
|
||
}
|
||
app->batch_result = Example_Build_Batch(app, &event->request);
|
||
if (app->batch_result < 0) { reply = IEC104_Interrogation_Fail_Request(app->interrogation, event); }
|
||
else if (app->batch_result == 0) { reply = IEC104_Interrogation_Complete_Data(app->interrogation, event); }
|
||
else { reply = IEC104_Interrogation_Submit_Batch(app->interrogation, event, &app->batch); }
|
||
if (reply == IEC104_INTERROGATION_REPLY_OK && app->batch_result > 0) {
|
||
if (app->gi_data.single_index < EXAMPLE_SIGNAL_COUNT) {
|
||
app->gi_data.single_index += app->batch.object_count;
|
||
} else if (app->gi_data.double_index < EXAMPLE_SIGNAL_COUNT) {
|
||
app->gi_data.double_index += app->batch.object_count;
|
||
} else { app->gi_data.scaled_index += app->batch.object_count; }
|
||
} else if (reply == IEC104_INTERROGATION_REPLY_OK && app->batch_result == 0) {
|
||
/* 其他站的数据随后才开始；无需等到所有站的ACT_TERM才复用游标。 */
|
||
if (!Example_End_Data(app)) { return false; }
|
||
}
|
||
break;
|
||
case IEC104_INTERROGATION_FINISHED:
|
||
/* 完成、本地取消、主站撤销、超时、断线和失败统一清理。
|
||
* 真实异步采样还需在这里停止对应任务；迟到的旧FINISHED不清理新请求资源。 */
|
||
if (event->instance_id == app->session_instance && event->request_id == app->session_request) {
|
||
if (!Example_End_Data(app)) { return false; }
|
||
}
|
||
reply = IEC104_INTERROGATION_REPLY_OK; /* 终结通知无需调用任何应答接口。 */
|
||
break;
|
||
default: return false;
|
||
}
|
||
/* WAIT保留business_event且游标不动；下轮重新Build_Batch，不重发缓存的旧点值。 */
|
||
if (reply == IEC104_INTERROGATION_REPLY_WAIT) { return true; }
|
||
if (reply != IEC104_INTERROGATION_REPLY_OK && reply != IEC104_INTERROGATION_REPLY_STALE) { return false; }
|
||
app->business_pending = false;
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/* 同步模拟计数器动作：执行入口先验证事件，WAIT/STALE不调用本函数。
|
||
* 只在内存中一次完成选中组的操作；不调用网络，不再次进入召唤模块。
|
||
* 实际外部电表命令需要独立的执行结果和重复请求策略，不能套用此同步函数。 */
|
||
static bool Example_Counter_Action(void *context, const IEC104_InterrogationRequest_t *request)
|
||
{
|
||
ExampleApp *app = (ExampleApp *)context;
|
||
size_t first, end, index;
|
||
if (request->is_test || (request->qualifier != 1U && request->qualifier != 2U &&
|
||
request->qualifier != 5U) || request->freeze == 0U || request->freeze > 3U) { return false; }
|
||
first = request->qualifier == 2U ? 4U : 0U;
|
||
end = request->qualifier == 1U ? 4U : EXAMPLE_COUNTER_COUNT;
|
||
for (index = first; index < end; ++index) {
|
||
if (request->freeze != 3U) {
|
||
app->counter_frozen[index].value = app->counter_current[index];
|
||
app->counter_frozen[index].sequence_number =
|
||
(uint8_t)((app->counter_frozen[index].sequence_number + 1U) & 31U);
|
||
}
|
||
if (request->freeze >= 2U) { app->counter_current[index] = 0; }
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/* 释放当前读取的节点引用和快照归属；快照字节无需清零，下次读取会整体覆盖。
|
||
* Complete_Data成功或匹配的FINISHED都可收尾，冻结动作本身不占用读取游标。 */
|
||
static bool Example_End_Counter(ExampleApp *app)
|
||
{
|
||
if (app->counter_station != NULL &&
|
||
IEC104_Slave_Release_Station(app->slave, app->counter_station) != IEC104_STATION_OK) { return false; }
|
||
app->counter_station = NULL;
|
||
app->counter_instance = app->counter_request = 0U;
|
||
app->counter_cursor = app->counter_end = 0U;
|
||
return true;
|
||
}
|
||
|
||
/* 从本轮固定快照构造一个Type15、SQ=0批次，共用ASDU缓冲但不推进游标。
|
||
* 返回1表示非空批次，0表示所选组已读完，-1表示构造失败；WAIT后仍取同一快照重组。 */
|
||
static int Example_Build_Counter_Batch(ExampleApp *app, const IEC104_InterrogationRequest_t *request)
|
||
{
|
||
IEC60870_AsduHeader_t header;
|
||
size_t index;
|
||
if (app->counter_cursor == app->counter_end) { return 0; }
|
||
memset(&header, 0, sizeof(header));
|
||
header.cause_of_transmission = request->data_cause;
|
||
header.common_address = request->common_address;
|
||
header.originator_address = request->originator_address;
|
||
header.is_test = request->is_test;
|
||
if (IEC60870_Asdu_Create(&app->batch, IEC104_Slave_Get_Application_Layer_Parameters(app->slave),
|
||
app->batch_bytes, sizeof(app->batch_bytes), &header, 0) != IEC60870_ASDU_OK) { return -1; }
|
||
for (index = app->counter_cursor; index < app->counter_end &&
|
||
app->batch.object_count < request->max_objects_per_asdu; ++index) {
|
||
IEC60870_IntegratedTotals_t point;
|
||
IEC60870_AsduResult_t result;
|
||
if (IEC60870_IntegratedTotals_Create(&point, (uint32_t)(3001U + index),
|
||
&app->counter_snapshot[index]) != IEC60870_ASDU_OK) { return -1; }
|
||
result = IEC60870_Asdu_Add_InformationObject(&app->batch, &point.object);
|
||
if (result == IEC60870_ASDU_FULL) { break; }
|
||
if (result != IEC60870_ASDU_OK) { return -1; }
|
||
}
|
||
return app->batch.object_count != 0U ? 1 : -1;
|
||
}
|
||
|
||
/* 冻结值在首个NEED_DATA固定为本轮快照；WAIT重建报文也使用同一份值、序号和品质。
|
||
* 模拟点值属于本应用；真实共享数据源应在其锁内取得快照后再进行网络提交。 */
|
||
static bool Example_Drain_Counter(ExampleApp *app)
|
||
{
|
||
unsigned count;
|
||
if (app->counter == NULL) { return true; }
|
||
for (count = 0U; count < EXAMPLE_EVENT_BUDGET; ++count) {
|
||
IEC104_InterrogationEvent_t *event = &app->counter_event;
|
||
IEC104_InterrogationReplyResult_t reply;
|
||
if (!app->counter_pending) {
|
||
IEC104_InterrogationNextResult_t next = IEC104_Interrogation_NextEvent(app->counter, event);
|
||
if (next == IEC104_INTERROGATION_NEXT_EMPTY) { return true; }
|
||
if (next != IEC104_INTERROGATION_NEXT_READY) { return false; }
|
||
app->counter_pending = true;
|
||
}
|
||
switch (event->type) {
|
||
case IEC104_INTERROGATION_BEGIN: {
|
||
IEC104_Station_t *station = IEC104_Slave_Get_Station_By_Id(app->slave, event->request.station_id);
|
||
bool accept = IEC104_Station_Get_Context(station) == app &&
|
||
(event->request.qualifier == 1U || event->request.qualifier == 2U || event->request.qualifier == 5U);
|
||
if (accept && event->request.freeze != 0U && !event->request.is_test) {
|
||
reply = IEC104_CounterInterrogation_Execute_Begin(app->counter, event, Example_Counter_Action, app);
|
||
} else {
|
||
reply = IEC104_Interrogation_Reply_Begin(app->counter, event,
|
||
accept && event->request.freeze == 0U);
|
||
}
|
||
break;
|
||
}
|
||
case IEC104_INTERROGATION_NEED_DATA: {
|
||
int built;
|
||
if (event->instance_id != app->counter_instance || event->request_id != app->counter_request) {
|
||
IEC104_Station_t *station;
|
||
if (app->counter_request != 0U) { return false; }
|
||
station = IEC104_Slave_Get_Station_By_Id(app->slave, event->request.station_id);
|
||
if (station == NULL || IEC104_Station_Get_Context(station) != app ||
|
||
IEC104_Slave_Acquire_Station(app->slave, station) != IEC104_STATION_OK) { return false; }
|
||
app->counter_station = station;
|
||
memcpy(app->counter_snapshot, app->counter_frozen, sizeof(app->counter_snapshot));
|
||
app->counter_cursor = event->request.qualifier == 2U ? 4U : 0U;
|
||
app->counter_end = event->request.qualifier == 1U ? 4U : EXAMPLE_COUNTER_COUNT;
|
||
app->counter_instance = event->instance_id;
|
||
app->counter_request = event->request_id;
|
||
}
|
||
built = Example_Build_Counter_Batch(app, &event->request);
|
||
if (built < 0) { reply = IEC104_Interrogation_Fail_Request(app->counter, event); }
|
||
else if (built == 0) { reply = IEC104_Interrogation_Complete_Data(app->counter, event); }
|
||
else { reply = IEC104_Interrogation_Submit_Batch(app->counter, event, &app->batch); }
|
||
if (reply == IEC104_INTERROGATION_REPLY_OK) {
|
||
if (built > 0) { app->counter_cursor += app->batch.object_count; }
|
||
else if (built == 0 && !Example_End_Counter(app)) { return false; }
|
||
}
|
||
break;
|
||
}
|
||
case IEC104_INTERROGATION_FINISHED:
|
||
if (event->reason == IEC104_INTERROGATION_FINISH_COMPLETED) { ++app->counter_completed; }
|
||
if (event->instance_id == app->counter_instance && event->request_id == app->counter_request &&
|
||
!Example_End_Counter(app)) { return false; }
|
||
reply = IEC104_INTERROGATION_REPLY_OK;
|
||
break;
|
||
default: return false;
|
||
}
|
||
if (reply == IEC104_INTERROGATION_REPLY_WAIT) { return true; }
|
||
if (reply != IEC104_INTERROGATION_REPLY_OK && reply != IEC104_INTERROGATION_REPLY_STALE) { return false; }
|
||
app->counter_pending = false;
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/* 必须在开始消费Slave事件之前创建业务模块；config本地对象按值复制，广播数组仍为借用。
|
||
* 单站可传NULL/0；多站广播须提供覆盖全部目标的数组，保持独占和地址稳定直到模块Destroy。 */
|
||
static bool Example_Init(ExampleApp *app, IEC104_Slave_t *slave, uint16_t common_address,
|
||
IEC104_InterrogationStationState_t *broadcast_states, size_t broadcast_capacity)
|
||
{
|
||
IEC104_InterrogationConfig_t config;
|
||
size_t index;
|
||
memset(app, 0, sizeof(*app));
|
||
app->slave = slave;
|
||
/* 每个应用实例独立保存受控运行值：单点沿用原总召初值，双点1表示分位。
|
||
* 这里只在应用初始化时赋值，选择结束、撤销和FINISHED清理均不得恢复这些初值。 */
|
||
for (index = 0U; index < EXAMPLE_SIGNAL_COUNT; ++index) {
|
||
app->signal_values[index] = example_signals[index].value;
|
||
app->double_values[index] = 1U;
|
||
}
|
||
if (IEC104_Slave_Add_Station(slave, &app->station, common_address, app) != IEC104_STATION_OK) { return false; }
|
||
IEC104_Interrogation_Config_Default(&config);
|
||
config.use_station_registry = true; /* CA只在注册时指定；多站广播需提供每站状态区。 */
|
||
config.broadcast_states = broadcast_states;
|
||
config.broadcast_capacity = broadcast_capacity;
|
||
config.max_objects_per_asdu = 4U;
|
||
app->interrogation = IEC104_Interrogation_Create(slave, &config);
|
||
if (app->interrogation == NULL) { (void)IEC104_Slave_Remove_Station(slave, &app->station); }
|
||
return app->interrogation != NULL;
|
||
}
|
||
|
||
/* 计数量实例可选，独立提供广播状态区；不共享总召的数组或取数游标。
|
||
* CLI仅注册一站。测试可给多个CA注册同一app，它们会指向同一组模拟计数器；
|
||
* 真实多站应用应让各站context分别拥有计数器数据，尤其不要逐站复位同一物理源。 */
|
||
static bool Example_Init_Counters(ExampleApp *app,
|
||
IEC104_InterrogationStationState_t *broadcast_states, size_t broadcast_capacity)
|
||
{
|
||
static const int32_t initial[EXAMPLE_COUNTER_COUNT] = {120000, 345600, 7890, 0, 1, 65535, INT32_MAX, 42};
|
||
IEC104_InterrogationConfig_t config;
|
||
size_t index;
|
||
if (app->counter != NULL) { return false; }
|
||
IEC104_Interrogation_Config_Default(&config);
|
||
config.use_station_registry = true;
|
||
config.broadcast_states = broadcast_states;
|
||
config.broadcast_capacity = broadcast_capacity;
|
||
config.max_objects_per_asdu = 4U;
|
||
app->counter = IEC104_CounterInterrogation_Create(app->slave, &config);
|
||
if (app->counter == NULL) { return false; }
|
||
for (index = 0U; index < EXAMPLE_COUNTER_COUNT; ++index) {
|
||
app->counter_current[index] = initial[index];
|
||
app->counter_frozen[index].value = initial[index];
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/* 执行检查已完成时区换算和滞留补偿；动作不重复补偿，也不推进网络事件循环。 */
|
||
static bool Example_Clock_Action(void *context, const IEC104_ClockSynchronizationRequest_t *request)
|
||
{
|
||
ExampleApp *app = (ExampleApp *)context;
|
||
if (app->clock_system) { return IEC60870_Clock_Set(&request->local_time) != 0; }
|
||
app->clock_utc_ms = request->utc_ms;
|
||
app->clock_base_ms = request->base_ms;
|
||
app->clock_valid = true;
|
||
return true;
|
||
}
|
||
|
||
/* config可为NULL采用默认值；创建须早于消费Slave通知，实例独占自身请求和确认状态。 */
|
||
static bool Example_Init_Clock(ExampleApp *app, const IEC104_ClockSynchronizationConfig_t *config)
|
||
{
|
||
IEC104_ClockSynchronizationConfig_t defaults;
|
||
if (app->clock != NULL) { return false; }
|
||
if (config == NULL) {
|
||
IEC104_ClockSynchronization_Config_Default(&defaults);
|
||
config = &defaults;
|
||
}
|
||
app->clock = IEC104_ClockSynchronization_Create(app->slave, config);
|
||
return app->clock != NULL;
|
||
}
|
||
|
||
/* 每轮最多执行事件预算条请求；WAIT先交回Slave消费通知，不重放已经执行的动作。 */
|
||
static bool Example_Drain_Clock(ExampleApp *app)
|
||
{
|
||
unsigned count;
|
||
if (app->clock == NULL) { return true; }
|
||
for (count = 0U; count < EXAMPLE_EVENT_BUDGET; ++count) {
|
||
IEC104_ClockSynchronizationExecuteResult_t result =
|
||
IEC104_ClockSynchronization_Execute_Next(app->clock, Example_Clock_Action, app);
|
||
if (result == IEC104_CLOCK_SYNCHRONIZATION_EXECUTE_EMPTY ||
|
||
result == IEC104_CLOCK_SYNCHRONIZATION_EXECUTE_WAIT) { return true; }
|
||
if (result != IEC104_CLOCK_SYNCHRONIZATION_EXECUTE_OK) { return false; }
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/**
|
||
* 功能：把示例支持的遥控命令地址映射为对应运行值数组的下标。
|
||
* 输入参数：request——非NULL的已解码45/46工作请求，仅借用；本函数不检查会话或选择匹配。
|
||
* 输出参数：index——非NULL，仅成功时写入0..EXAMPLE_SIGNAL_COUNT-1，失败保持原值。
|
||
* 返回值：true为Type45的6001..6008或Type46的6101..6108；false为示例点表之外的类型/地址。
|
||
* 说明：库负责协议格式和事务身份，应用负责IOA是否存在；范围外由调用者Reject(UNKNOWN_IOA)。
|
||
* 单点命令6001..6008映射到遥信1001..1008；双点命令6101..6108映射到位置1101..1108。
|
||
*/
|
||
static bool Example_Command_Point(const IEC104_CommandRequest_t *request, size_t *index)
|
||
{
|
||
uint32_t first = request->type_id == 45U ? 6001U : 6101U;
|
||
if ((request->type_id != 45U && request->type_id != 46U) || request->ioa < first ||
|
||
request->ioa - first >= EXAMPLE_SIGNAL_COUNT) { return false; }
|
||
*index = (size_t)(request->ioa - first);
|
||
return true;
|
||
}
|
||
|
||
/**
|
||
* 功能：执行已通过Accept校验并消费的选择/执行动作，仅修改模拟设备状态。
|
||
* 输入参数：context——当前ExampleApp；request——库仅在本次回调期间借出的工作请求，不得保存指针。
|
||
* 输出参数：选择置返校标志；执行置输出标志并更新对应单点/双点运行值，供后续返回信息及总召读取。
|
||
* 返回值：点表不匹配返回NOT_STARTED且没有副作用；模拟动作完成返回STARTED。
|
||
* 说明：STARTED表示选择生效或输出启动，不代替Report_Result。真实异步驱动应在设备完成后报告结果。
|
||
* 不在动作中发布任何上报、推进Slave或重入修改Command；库不保存本函数或context。
|
||
*/
|
||
static IEC104_CommandActionResult_t Example_Command_Action(void *context,
|
||
const IEC104_CommandRequest_t *request)
|
||
{
|
||
ExampleApp *app = (ExampleApp *)context;
|
||
size_t index;
|
||
if (!Example_Command_Point(request, &index)) { return IEC104_COMMAND_ACTION_NOT_STARTED; }
|
||
if (request->is_select) { app->command_selected = true; }
|
||
else {
|
||
app->command_output = true;
|
||
if (request->type_id == 45U) { app->signal_values[index] = request->state; }
|
||
else { app->double_values[index] = request->state; }
|
||
}
|
||
return IEC104_COMMAND_ACTION_STARTED;
|
||
}
|
||
|
||
/**
|
||
* 功能：为已启动的当前EXECUTE构造一帧COT=11的模拟位置返回信息，此处只组包，不提交。
|
||
* 输入参数：app——非NULL，command_event保留当前EXECUTE身份，运行值已由动作更新。
|
||
* 输出参数：app->command_return及其固定10字节缓冲，CA/OA沿用工作请求，IOA映射到对应遥信。
|
||
* 返回值：true为Type1或Type3单对象ASDU构造成功；false为点表或编解码失败，此时不可提交该ASDU。
|
||
* 说明：命令模块已拒绝TEST请求，因此清零公共头得到TEST=0；对象品质为示例约定的0。
|
||
* 局部信息对象由ASDU编码复制，离开函数不借用局部变量；ASDU仍借用app内固定字节缓冲。
|
||
* 成功后冻结这一帧，Submit_Return_Info的WAIT不重新组包；只有OK才可推进，避免同一变位重复上报。
|
||
*/
|
||
static bool Example_Build_Command_Return(ExampleApp *app)
|
||
{
|
||
const IEC104_CommandRequest_t *request = &app->command_event.request;
|
||
IEC60870_AsduHeader_t header;
|
||
size_t index;
|
||
if (!Example_Command_Point(request, &index)) { return false; }
|
||
memset(&header, 0, sizeof(header));
|
||
header.cause_of_transmission = IEC60870_ASDU_COT_RETURN_INFO_REMOTE;
|
||
header.common_address = request->common_address;
|
||
header.originator_address = request->originator_address;
|
||
if (IEC60870_Asdu_Create(&app->command_return,
|
||
IEC104_Slave_Get_Application_Layer_Parameters(app->slave), app->command_return_bytes,
|
||
sizeof(app->command_return_bytes), &header, 0) != IEC60870_ASDU_OK) { return false; }
|
||
if (request->type_id == 45U) {
|
||
IEC60870_SinglePointInformation_t point;
|
||
return IEC60870_SinglePointInformation_Create(&point, (uint32_t)(1001U + index),
|
||
app->signal_values[index], 0U) == IEC60870_ASDU_OK &&
|
||
IEC60870_Asdu_Add_InformationObject(&app->command_return, &point.object) == IEC60870_ASDU_OK;
|
||
} else {
|
||
IEC60870_DoublePointInformation_t point;
|
||
return IEC60870_DoublePointInformation_Create(&point, (uint32_t)(1101U + index),
|
||
app->double_values[index], 0U) == IEC60870_ASDU_OK &&
|
||
IEC60870_Asdu_Add_InformationObject(&app->command_return, &point.object) == IEC60870_ASDU_OK;
|
||
}
|
||
}
|
||
|
||
/**
|
||
* 功能：消费遥控业务事件、处理应用决定，并推进结果报告/返回信息/Complete的持久化步骤。
|
||
* 输入参数：app——非NULL，所属Slave通知须先按FIFO分派；command可为NULL以兼容仅总召测试。
|
||
* 输出参数：更新应用持有事件、站点引用、模拟标志和重试步骤；不替代Command_Process提交协议应答。
|
||
* 返回值：true为本轮处理完成或遇到正常WAIT/STALE；false为事件身份、引用或接口/组包错误。
|
||
* 说明：先读取业务事件再重试旧交互，使STOP、断线、撤销产生的FINISHED能先清理过期步骤。
|
||
* 一个事务可能交付SELECT后再交付EXECUTE，但只持有一个应用站点引用，最后恰好按FINISHED清理。
|
||
* FINISHED不回滚设备值；本例动作同步完成，可直接清除模拟标志并Release。真实输出未结束时，
|
||
* 应用须另存设备操作及站点引用，保持设备忙状态，不能照搬本例的立即释放。
|
||
*/
|
||
static bool Example_Drain_Command(ExampleApp *app)
|
||
{
|
||
unsigned count;
|
||
if (app->command == NULL) { return true; }
|
||
for (count = 0U; count < EXAMPLE_EVENT_BUDGET; ++count) {
|
||
IEC104_CommandEvent_t event;
|
||
IEC104_CommandNextResult_t next = IEC104_Command_NextEvent(app->command, &event);
|
||
if (next == IEC104_COMMAND_NEXT_EMPTY) { break; }
|
||
if (next != IEC104_COMMAND_NEXT_READY) { return false; }
|
||
if (event.type == IEC104_COMMAND_FINISHED) {
|
||
/* 只清理当前应用持有的事务，不能让旧实例/旧事务的终结通知释放另一次输出资源。
|
||
* 模块槽可能仍因最后应答WAIT而占用；应用读到FINISHED也不能据此强行发起新动作。 */
|
||
if (event.instance_id != app->command_instance ||
|
||
event.transaction_id != app->command_transaction) { return false; }
|
||
if (event.select_effect) { app->command_selected = false; }
|
||
if (event.execute_effect) { app->command_output = false; }
|
||
if (app->command_station != NULL &&
|
||
IEC104_Slave_Release_Station(app->slave, app->command_station) != IEC104_STATION_OK) { return false; }
|
||
app->command_station = NULL;
|
||
app->command_instance = app->command_transaction = 0U;
|
||
app->command_pending = app->command_waiting = false;
|
||
app->command_step = 0U;
|
||
} else {
|
||
if (app->command_transaction == 0U) {
|
||
/* 先按注册编号找到原站并Acquire，再保存引用及事务身份；同CA重新注册不能替代原站。
|
||
* 模块自身的引用可能在FINISHED出队时释放，不能借它维持应用context的生命周期。 */
|
||
IEC104_Station_t *station = IEC104_Slave_Get_Station_By_Id(app->slave, event.request.station_id);
|
||
if (station == NULL || IEC104_Slave_Acquire_Station(app->slave, station) != IEC104_STATION_OK) {
|
||
return false;
|
||
}
|
||
app->command_station = station;
|
||
app->command_instance = event.instance_id;
|
||
app->command_transaction = event.transaction_id;
|
||
} else if (app->command_instance != event.instance_id ||
|
||
app->command_transaction != event.transaction_id || app->command_pending) { return false; }
|
||
/* 按值保存，不持有NextEvent局部变量的地址；匹配执行覆盖工作事件，继续保留同一站点引用。 */
|
||
app->command_event = event;
|
||
app->command_pending = true;
|
||
app->command_waiting = false;
|
||
}
|
||
}
|
||
if (app->command_pending) {
|
||
IEC104_CommandReplyResult_t reply;
|
||
size_t index;
|
||
/* context和点表属于应用策略；格式已合法但不属于本应用的点仍明确回UNKNOWN_IOA。 */
|
||
if (IEC104_Station_Get_Context(app->command_station) != app ||
|
||
!Example_Command_Point(&app->command_event.request, &index)) {
|
||
reply = IEC104_Command_Reject(app->command, &app->command_event, IEC104_COMMAND_REJECT_UNKNOWN_IOA);
|
||
} else { reply = IEC104_Command_Accept(app->command, &app->command_event, Example_Command_Action, app); }
|
||
app->command_waiting = reply == IEC104_COMMAND_REPLY_WAIT;
|
||
/* WAIT未消费工作事件、未调用动作；保留身份，下轮先处理Slave通知再重试。
|
||
* STALE不再重交动作，只保留事务归属等待FINISHED；OK也仅表示事件被消费。 */
|
||
if (app->command_waiting) { return true; }
|
||
if (reply != IEC104_COMMAND_REPLY_OK && reply != IEC104_COMMAND_REPLY_STALE) { return false; }
|
||
app->command_pending = false;
|
||
if (reply == IEC104_COMMAND_REPLY_OK && app->command_event.type == IEC104_COMMAND_EXECUTE) {
|
||
IEC104_CommandTransactionInfo_t info;
|
||
/* Reject和动作NOT_STARTED/FAILED也可能返回OK，必须确认仍为EXECUTING才能报告设备结果。
|
||
* 返回信息此时可先构造，但Submit_Return_Info会等待肯定执行确认已经交接。 */
|
||
if (IEC104_Command_Get_Transaction(app->command, &app->command_event, &info) && info.active &&
|
||
info.phase == IEC104_COMMAND_PHASE_EXECUTING) {
|
||
if (!Example_Build_Command_Return(app)) { return false; }
|
||
app->command_step = 1U;
|
||
}
|
||
}
|
||
}
|
||
/* 模拟动作已经完成，先报告结果停止执行计时；确认是否已交接不影响本次报告。
|
||
* 每轮至多推进三个步骤。每步仅OK后递增；返回信息OK已经固定帧序，不能因Complete等待而重发。 */
|
||
for (count = 0U; count < 3U && app->command_step != 0U; ++count) {
|
||
IEC104_CommandReplyResult_t reply;
|
||
if (app->command_step == 1U) {
|
||
reply = IEC104_Command_Report_Result(app->command, &app->command_event, IEC104_COMMAND_RESULT_SUCCEEDED);
|
||
} else if (app->command_step == 2U) {
|
||
reply = IEC104_Command_Submit_Return_Info(app->command, &app->command_event, &app->command_return);
|
||
} else { reply = IEC104_Command_Complete(app->command, &app->command_event); }
|
||
app->command_waiting = reply == IEC104_COMMAND_REPLY_WAIT;
|
||
/* WAIT保持当前步骤及完整ASDU；STALE停止后续提交，引用与模拟标志交给FINISHED统一清理。
|
||
* Complete的OK只关闭返回信息阶段，ACT_TERM交接及FINISHED仍由后续Process/NextEvent推进。 */
|
||
if (app->command_waiting) { return true; }
|
||
if (reply == IEC104_COMMAND_REPLY_STALE) { app->command_step = 0U; return true; }
|
||
if (reply != IEC104_COMMAND_REPLY_OK) { return false; }
|
||
app->command_step = app->command_step == 3U ? 0U : app->command_step + 1U;
|
||
}
|
||
return true;
|
||
}
|
||
|
||
#ifndef IEC104_SLAVE_EXAMPLE_NO_MAIN
|
||
/**
|
||
* 功能：为命令行示例创建默认遥控实例，与仅总召的初始化入口分开。
|
||
* 输入参数：app——非NULL，Slave句柄和站点已创建，尚未开始消费Slave通知。
|
||
* 输出参数：成功后保存app->command；失败不创建可用实例。
|
||
* 返回值：true为创建成功；false为重复初始化、配置/归属错误或静态池没有空位。
|
||
* 说明：默认45/46均须先选择，决定15秒、选择30秒、执行60秒；本函数不执行设备动作。
|
||
* 每Slave只能绑定一个Command。main在Slave_Init前创建亦可，但必须早于首条生命周期通知。
|
||
*/
|
||
static bool Example_Init_Command(ExampleApp *app)
|
||
{
|
||
IEC104_CommandConfig_t config;
|
||
if (app->command != NULL) { return false; }
|
||
IEC104_Command_Config_Default(&config);
|
||
app->command = IEC104_Command_Create(app->slave, &config);
|
||
return app->command != NULL;
|
||
}
|
||
#endif
|
||
|
||
/* 统一取消应用业务；app为有效应用上下文，未创建的可选模块直接跳过，无返回值。
|
||
* 遥控Cancel丢弃模块持有应答但保留应交付FINISHED，不回滚已经执行的输出。
|
||
* 本函数仅刷新状态，调用方还须Drain_Command读取终结通知、归还应用引用，再关闭Slave或Destroy。 */
|
||
static void Example_Cancel(ExampleApp *app)
|
||
{
|
||
IEC104_Interrogation_Cancel(app->interrogation);
|
||
if (app->counter != NULL) {
|
||
IEC104_Interrogation_Cancel(app->counter);
|
||
(void)IEC104_Interrogation_Get_Status(app->counter, &app->ci);
|
||
}
|
||
if (app->clock != NULL) {
|
||
IEC104_ClockSynchronization_Cancel(app->clock);
|
||
(void)IEC104_ClockSynchronization_Get_Status(app->clock, &app->cs);
|
||
}
|
||
if (app->command != NULL) {
|
||
IEC104_Command_Cancel(app->command);
|
||
(void)IEC104_Command_Get_Status(app->command, &app->command_status);
|
||
}
|
||
(void)IEC104_Interrogation_Get_Status(app->interrogation, &app->gi);
|
||
}
|
||
|
||
/* 每次等待前重新查询剩余期限，避免采样/业务处理耗时后继续使用旧的毫秒数。
|
||
* 输入app为有效上下文，maximum_ms为调用方等待上限；返回0表示本地立即续跑，否则为缩短后的上限。
|
||
* 查询失败也返回0，让随后推进路径处理错误；本函数只查状态，不消费事件或触发业务到期转换。
|
||
* 本地可推进时不休眠；否则本例网络等待最多50ms，并受最近业务期限限制。 */
|
||
static uint32_t Example_Wait_Time(ExampleApp *app, uint32_t maximum_ms)
|
||
{
|
||
if (app->command != NULL) {
|
||
if (!IEC104_Command_Get_Status(app->command, &app->command_status)) { return 0U; }
|
||
/* 未读Slave通知、FINISHED等业务事件及模块本地进度都须立即处理。
|
||
* 应用持有事件/收尾步骤不代表能立即发送：上次WAIT时允许Poll等待，避免确认拥塞造成空转。 */
|
||
if (app->command_status.events_pending || app->command_status.pending_events != 0U ||
|
||
app->command_status.need_process ||
|
||
((app->command_pending || app->command_step != 0U) && !app->command_waiting)) { return 0U; }
|
||
if (app->command_status.timer_active && app->command_status.timeout_remaining_ms < maximum_ms) {
|
||
maximum_ms = app->command_status.timeout_remaining_ms;
|
||
}
|
||
}
|
||
if (!IEC104_Interrogation_Get_Status(app->interrogation, &app->gi)) { return 0U; }
|
||
if (app->counter != NULL) {
|
||
if (!IEC104_Interrogation_Get_Status(app->counter, &app->ci)) { return 0U; }
|
||
if (app->ci.events_pending || app->ci.pending_events != 0U || app->ci.need_process) { return 0U; }
|
||
if (app->ci.timer_active && app->ci.timeout_remaining_ms < maximum_ms) {
|
||
maximum_ms = app->ci.timeout_remaining_ms;
|
||
}
|
||
}
|
||
if (app->clock != NULL) {
|
||
if (!IEC104_ClockSynchronization_Get_Status(app->clock, &app->cs)) { return 0U; }
|
||
if (app->cs.events_pending || app->cs.execute_pending || app->cs.need_process) { return 0U; }
|
||
if (app->cs.timer_active && app->cs.timeout_remaining_ms < maximum_ms) {
|
||
maximum_ms = app->cs.timeout_remaining_ms;
|
||
}
|
||
}
|
||
if (app->events_pending || app->gi.events_pending || app->gi.pending_events != 0U ||
|
||
app->gi.need_process) { return 0U; }
|
||
if (app->gi.timer_active && app->gi.timeout_remaining_ms < maximum_ms) { return app->gi.timeout_remaining_ms; }
|
||
return maximum_ms;
|
||
}
|
||
|
||
/* 状态事件交给所有实例；I帧依次由总召、计数量、时钟同步、遥控及兜底接手。
|
||
* 输入app为有效上下文，event是刚由Slave_NextEvent交付的借用事件，本函数不保存它的指针。
|
||
* 返回true表示分派完成（包括模块拒绝/丢弃），false表示业务入口或状态查询失败，应统一收尾。
|
||
* 生命周期通知不能因前一个模块HANDLED而短路，否则遥控可能漏读STOP/换代后继续执行旧请求。
|
||
* Handle_Event负责消费这些通知，不能在它之前用Check_Request等待通知读空而阻断分派。 */
|
||
static bool Example_Handle_Event(ExampleApp *app, const IEC104_SlaveEvent_t *event)
|
||
{
|
||
IEC104_InterrogationEventResult_t result;
|
||
/* Receiver已过滤线上基础格式错误；仍防御性过滤不可用视图，避免误交给业务分派或未知类型兜底。 */
|
||
if (event->transport.type == IEC104_TCP_EVENT_I_FRAME && event->asdu_result != IEC60870_ASDU_OK) { return true; }
|
||
result = IEC104_Interrogation_Handle_Event(app->interrogation, event);
|
||
if (app->counter != NULL && (event->transport.type != IEC104_TCP_EVENT_I_FRAME ||
|
||
result == IEC104_INTERROGATION_EVENT_IGNORED)) {
|
||
IEC104_InterrogationEventResult_t counter_result = IEC104_Interrogation_Handle_Event(app->counter, event);
|
||
if (counter_result == IEC104_INTERROGATION_EVENT_ERROR ||
|
||
!IEC104_Interrogation_Get_Status(app->counter, &app->ci)) { return false; }
|
||
if (result == IEC104_INTERROGATION_EVENT_IGNORED) { result = counter_result; }
|
||
}
|
||
if (result == IEC104_INTERROGATION_EVENT_ERROR ||
|
||
!IEC104_Interrogation_Get_Status(app->interrogation, &app->gi)) { return false; }
|
||
if (app->clock != NULL && (event->transport.type != IEC104_TCP_EVENT_I_FRAME ||
|
||
result == IEC104_INTERROGATION_EVENT_IGNORED)) {
|
||
IEC104_ClockSynchronizationEventResult_t clock_result =
|
||
IEC104_ClockSynchronization_Handle_Event(app->clock, event);
|
||
if (clock_result == IEC104_CLOCK_SYNCHRONIZATION_EVENT_ERROR ||
|
||
!IEC104_ClockSynchronization_Get_Status(app->clock, &app->cs)) { return false; }
|
||
if (clock_result != IEC104_CLOCK_SYNCHRONIZATION_EVENT_IGNORED &&
|
||
event->transport.type == IEC104_TCP_EVENT_I_FRAME) { return true; }
|
||
}
|
||
if (app->command != NULL && (event->transport.type != IEC104_TCP_EVENT_I_FRAME ||
|
||
result == IEC104_INTERROGATION_EVENT_IGNORED)) {
|
||
/* HANDLED也包括格式否定、实例忙和过载丢弃，不能再走44兜底；未启用类型仍可继续分派。 */
|
||
IEC104_CommandEventResult_t command_result = IEC104_Command_Handle_Event(app->command, event);
|
||
if (command_result == IEC104_COMMAND_EVENT_ERROR ||
|
||
!IEC104_Command_Get_Status(app->command, &app->command_status)) { return false; }
|
||
if (command_result != IEC104_COMMAND_EVENT_IGNORED &&
|
||
event->transport.type == IEC104_TCP_EVENT_I_FRAME) { return true; }
|
||
}
|
||
if (result != IEC104_INTERROGATION_EVENT_IGNORED ||
|
||
event->transport.type != IEC104_TCP_EVENT_I_FRAME || !app->gi.active ||
|
||
event->transport.generation != app->gi.generation) { return true; }
|
||
/* 当前事件当场提交，必须在NextEvent读取后续通知之前调用；应用不保存兜底请求。
|
||
* HIGH满只丢本条并计数；原连接停用/断开则取消，不跨启停续发。 */
|
||
++app->other_rejected;
|
||
switch (IEC104_Slave_Reject_Request(app->slave, event, IEC60870_ASDU_COT_UNKNOWN_TYPE)) {
|
||
case IEC104_TCP_SUBMIT_OK: ++app->other_submitted; break;
|
||
case IEC104_TCP_SUBMIT_WAIT: ++app->other_overloads; break;
|
||
case IEC104_TCP_SUBMIT_FATAL:
|
||
/* 可能已写出字节；cancelled仅表示不再重试，继续读取断线通知。 */
|
||
++app->other_cancelled;
|
||
break;
|
||
default: ++app->other_cancelled; break;
|
||
}
|
||
return true;
|
||
}
|
||
|
||
/* 两种业务各自推进协议、消费业务事件并刷新状态，供外层轮换调用次序。 */
|
||
static bool Example_Step_General(ExampleApp *app)
|
||
{
|
||
return IEC104_Interrogation_Process(app->interrogation) && Example_Drain_Business(app) &&
|
||
IEC104_Interrogation_Get_Status(app->interrogation, &app->gi);
|
||
}
|
||
|
||
/* 仅总召测试不创建计数量实例，此时直接完成本轮；已创建时采用相同推进顺序。 */
|
||
static bool Example_Step_Counter(ExampleApp *app)
|
||
{
|
||
return app->counter == NULL || (IEC104_Interrogation_Process(app->counter) && Example_Drain_Counter(app) &&
|
||
IEC104_Interrogation_Get_Status(app->counter, &app->ci));
|
||
}
|
||
|
||
static bool Example_Step_Clock(ExampleApp *app)
|
||
{
|
||
return app->clock == NULL || (IEC104_ClockSynchronization_Process(app->clock) &&
|
||
Example_Drain_Clock(app) && IEC104_ClockSynchronization_Get_Status(app->clock, &app->cs));
|
||
}
|
||
|
||
/* 先推进遥控，随后两类召唤轮换、对时；发送WAIT后下一轮继续，不只靠need_process重试。
|
||
* app为有效上下文；返回true表示本轮成功或因未读通知暂缓，false交给主循环停止并清理。
|
||
* Command_Process只推进协议应答，Drain_Command才执行应用决定及结果/返回信息步骤，最后刷新调度快照。
|
||
* 通知预算尚未读空时不能调用Accept；否则可能在尚未分派的STOP或撤销之后错误启动设备。 */
|
||
static bool Example_Step(ExampleApp *app)
|
||
{
|
||
if (app->events_pending) { return true; }
|
||
if (app->command != NULL && (!IEC104_Command_Process(app->command) || !Example_Drain_Command(app) ||
|
||
!IEC104_Command_Get_Status(app->command, &app->command_status))) { return false; }
|
||
app->counter_first = !app->counter_first;
|
||
if (app->counter_first) {
|
||
if (!Example_Step_Counter(app) || !Example_Step_General(app)) { return false; }
|
||
} else {
|
||
if (!Example_Step_General(app) || !Example_Step_Counter(app)) { return false; }
|
||
}
|
||
return Example_Step_Clock(app);
|
||
}
|
||
|
||
/* 有界消费通知。预算用完先续读，不能跨过排在后面的STOP/START直接续发旧总召或执行旧遥控。
|
||
* 只有读到EMPTY才清events_pending并允许Example_Step推进动作，避免用最终激活状态掩盖中间STOP。 */
|
||
static bool Example_Drain(ExampleApp *app)
|
||
{
|
||
unsigned count;
|
||
IEC104_SlaveEvent_t event;
|
||
for (count = 0U; count < EXAMPLE_EVENT_BUDGET; ++count) {
|
||
IEC104_TcpEventResult_t result = IEC104_Slave_NextEvent(app->slave, &event);
|
||
if (result == IEC104_TCP_EVENT_EMPTY) { app->events_pending = false; return true; }
|
||
if (result != IEC104_TCP_EVENT_READY || !Example_Handle_Event(app, &event)) { return false; }
|
||
}
|
||
app->events_pending = true;
|
||
return true;
|
||
}
|
||
|
||
#ifndef IEC104_SLAVE_EXAMPLE_NO_MAIN
|
||
#ifndef _WIN32
|
||
#error "This executable uses the Windows network backend"
|
||
#endif
|
||
#ifndef _WIN32_WINNT
|
||
/* GetTickCount64所需的最低Windows API声明；这里只用于示例运行时长，不处理业务时标。 */
|
||
#define _WIN32_WINNT 0x0600
|
||
#endif
|
||
#ifndef WIN32_LEAN_AND_MEAN
|
||
/* 只引入本入口需要的Windows基础声明，socket操作仍全部留在协议库的Net后端。 */
|
||
#define WIN32_LEAN_AND_MEAN
|
||
#endif
|
||
#include <windows.h>
|
||
#include <errno.h>
|
||
#include <signal.h>
|
||
|
||
/* 信号处理器和主循环之间只交换停止标志；静态初始化为0，不在信号处理器中访问任务或网络。 */
|
||
static volatile sig_atomic_t example_stop;
|
||
|
||
/**
|
||
* 功能：在已注册的停止信号到来时请求主循环退出。
|
||
* 输入参数：signal_number——运行库传入的信号编号，这里不区分SIGINT与SIGTERM。
|
||
* 输出参数：example_stop置1。
|
||
* 返回值：无。
|
||
* 说明：信号上下文只写sig_atomic_t，不打印、不分配、不调用Slave；资源由main正常收尾。
|
||
*/
|
||
static void Example_Stop(int signal_number) { (void)signal_number; example_stop = 1; }
|
||
|
||
/**
|
||
* 功能：把纯十进制命令行文本解析为不超过max的unsigned long。
|
||
* 输入参数：text——非NULL且以NUL结束的字符串；max——此选项允许的最大值。
|
||
* 输出参数：value——非NULL输出存储，仅成功时写入；失败保持原值。
|
||
* 返回值：true为整个字符串解析成功且未越界；false为空串、符号/空白前缀、尾部字符或溢出。
|
||
* 说明：先检查再截窄为端口、CA或窗口类型，避免越界数值被静默截断；允许前导零及数值0。
|
||
* 某些选项禁止0，由main另查；端口0表示自动分配，run-ms=0表示持续运行。
|
||
*/
|
||
static bool Example_Number(const char *text, unsigned long max, unsigned long *value)
|
||
{
|
||
char *end;
|
||
unsigned long parsed;
|
||
if (text[0] < '0' || text[0] > '9') { return false; }
|
||
/* strtoul通过errno报告数值溢出；先清零，避免沿用上一次库调用的错误。 */
|
||
errno = 0;
|
||
parsed = strtoul(text, &end, 10);
|
||
if (errno != 0 || *end != '\0' || parsed > max) { return false; }
|
||
*value = parsed;
|
||
return true;
|
||
}
|
||
|
||
/**
|
||
* 功能：向标准输出打印本示例支持的选项、默认监听配置及模拟点地址范围。
|
||
* 输入参数：program——非NULL程序名称，main传入argv[0]。
|
||
* 输出参数：无，文本写入stdout。
|
||
* 返回值：无。
|
||
* 说明：本函数不创建服务或退出进程；main根据--help或缺少参数分别选择成功/失败退出。
|
||
*/
|
||
static void Example_Usage(const char *program)
|
||
{
|
||
printf("Usage: %s [--bind IPv4] [--port 0..65535] [--ca 1..65534]\n"
|
||
" [--window 1..32767] [--run-ms milliseconds] [--clock simulated|system]\n"
|
||
"Defaults: 127.0.0.1:2404, CA=1, k=12, run until Ctrl+C.\n"
|
||
"GI: QOI=20 (all), 21 (single/double signals), 22 (scaled); IOA=0.\n"
|
||
"Single signals 1001..1008, double signals 1101..1108, scaled values 2001..2008.\n"
|
||
"COT=8 cancels matching GI.\n"
|
||
"Counters 3001..3008: RQT=5 (all), 1/2 (groups); Type 15, four per batch.\n"
|
||
"FRZ=0 reads frozen values; 1 freezes; 2 freezes/resets; 3 resets.\n"
|
||
"Freeze/reset completes with ACT_CON only; TEST actions and COT=8 are rejected.\n"
|
||
"Clock: simulated by default; system sets the actual clock and requires permission.\n"
|
||
"Clock requests use UTC+8 standard time; TEST is rejected without setting time.\n"
|
||
"Commands: Type45 IOA6001..6008 -> signals1001..1008; Type46 IOA6101..6108 -> double1101..1108.\n"
|
||
"Commands require select then execute; COT8 cancels selection; TEST is rejected.\n", program);
|
||
}
|
||
|
||
/**
|
||
* 功能：配置并运行子站示例，退出时关闭服务、读空通知并归还静态槽。
|
||
* 输入参数：argc/argv——命令行；除--help外，每个选项后都须有一个值。
|
||
* 输出参数：stdout输出帮助、监听端点和累计统计；stderr输出参数或运行失败信息。
|
||
* 返回值：EXIT_SUCCESS为帮助输出或正常停止；参数、初始化、运行或清理失败为EXIT_FAILURE。
|
||
* 说明：服务生命周期为Create -> Init -> 循环Poll/Drain/Step -> Close -> 读空事件 -> Destroy。
|
||
* main拥有Slave句柄，app只借用；静态app和库内任务在整个运行期间保持地址不变。
|
||
* run-ms使用单调毫秒时钟，在循环边界检查，表示约定运行时长而非精确的退出截止时刻。
|
||
*/
|
||
int main(int argc, char **argv)
|
||
{
|
||
static ExampleApp app; /* 注册站点及业务借用的存储在退出前保持地址不变。 */
|
||
IEC104_SlaveConfig_t config; /* 本地配置，Slave_Init会复制，不在运行中借用它。 */
|
||
IEC104_TcpError_t error; /* 最近一次服务接口调用的诊断，与历史网络错误分开。 */
|
||
IEC104_TcpServerStatus_t status; /* 启动后查询实际端口，尤其用于--port=0。 */
|
||
IEC104_Slave_t *slave; /* main持有的唯一服务句柄，清理结束后不再使用。 */
|
||
IEC104_TcpResult_t result; /* 服务结果须显式比较IEC104_TCP_OK，不能作布尔判断。 */
|
||
uint16_t common_address = 1U; /* 应用地址校验条件，不是TCP端口或单点IOA。 */
|
||
unsigned long run_ms = 0U; /* 0为持续运行，非零为命令行指定的运行毫秒数。 */
|
||
bool clock_system = false; /* 默认模拟；解析后再写入Example_Init清零后的app。 */
|
||
uint64_t started; /* 开始主循环前的单调时刻，与CP56日历时间无关。 */
|
||
int arg, exit_code = EXIT_SUCCESS; /* arg遍历选项和值；任一阶段失败后保留失败退出码。 */
|
||
/* 第1步：采用库的协议默认值，只把示例默认监听地址收窄到本机回环地址。 */
|
||
IEC104_Slave_Config_Default(&config);
|
||
memcpy(config.bind_address, "127.0.0.1", sizeof("127.0.0.1"));
|
||
for (arg = 1; arg < argc; ++arg) {
|
||
unsigned long value; /* 先在宽整数中验证范围，再赋给配置中的较窄字段。 */
|
||
const char *option = argv[arg];
|
||
if (strcmp(option, "--help") == 0) { Example_Usage(argv[0]); return EXIT_SUCCESS; }
|
||
/* 非帮助选项必须有值；此处前进一次取值，for尾部再前进一次到下一个选项。 */
|
||
if (++arg == argc) { Example_Usage(argv[0]); return EXIT_FAILURE; }
|
||
if (strcmp(option, "--bind") == 0) {
|
||
/* 这里只保证固定数组能容纳含NUL的文本，IPv4语法由Slave_Init中的Net后端检查。 */
|
||
if (strlen(argv[arg]) >= sizeof(config.bind_address)) { return EXIT_FAILURE; }
|
||
strcpy(config.bind_address, argv[arg]);
|
||
} else if (strcmp(option, "--port") == 0 && Example_Number(argv[arg], UINT16_MAX, &value)) {
|
||
config.port = (uint16_t)value;
|
||
} else if (strcmp(option, "--ca") == 0 && Example_Number(argv[arg], 65534U, &value) && value != 0U) {
|
||
common_address = (uint16_t)value;
|
||
} else if (strcmp(option, "--window") == 0 &&
|
||
Example_Number(argv[arg], IEC104_SEQUENCE_MASK, &value) && value != 0U) {
|
||
config.protocol.link.k = (uint16_t)value;
|
||
} else if (strcmp(option, "--run-ms") == 0 && Example_Number(argv[arg], UINT32_MAX, &value)) {
|
||
run_ms = value;
|
||
} else if (strcmp(option, "--clock") == 0 && strcmp(argv[arg], "simulated") == 0) {
|
||
clock_system = false;
|
||
} else if (strcmp(option, "--clock") == 0 && strcmp(argv[arg], "system") == 0) {
|
||
clock_system = true;
|
||
} else {
|
||
fprintf(stderr, "Invalid option/value: %s %s\n", option, argv[arg]);
|
||
return EXIT_FAILURE;
|
||
}
|
||
}
|
||
/* 第2步：取得静态池句柄后绑定应用上下文，再初始化实际网络监听。 */
|
||
slave = IEC104_Slave_Create();
|
||
if (slave == NULL) { fputs("No free Slave service slot\n", stderr); return EXIT_FAILURE; }
|
||
if (!Example_Init(&app, slave, common_address, NULL, 0U)) {
|
||
(void)IEC104_Slave_Destroy(slave, NULL);
|
||
return EXIT_FAILURE;
|
||
}
|
||
if (!Example_Init_Counters(&app, NULL, 0U)) {
|
||
(void)IEC104_Interrogation_Destroy(app.interrogation);
|
||
(void)IEC104_Slave_Remove_Station(slave, &app.station);
|
||
(void)IEC104_Slave_Destroy(slave, NULL);
|
||
return EXIT_FAILURE;
|
||
}
|
||
if (!Example_Init_Clock(&app, NULL)) {
|
||
(void)IEC104_Interrogation_Destroy(app.interrogation);
|
||
(void)IEC104_Interrogation_Destroy(app.counter);
|
||
(void)IEC104_Slave_Remove_Station(slave, &app.station);
|
||
(void)IEC104_Slave_Destroy(slave, NULL);
|
||
return EXIT_FAILURE;
|
||
}
|
||
/* 在网络监听及首条Slave通知之前绑定遥控实例；失败时尚无事务，按创建的逆序归还业务对象。 */
|
||
if (!Example_Init_Command(&app)) {
|
||
(void)IEC104_ClockSynchronization_Destroy(app.clock);
|
||
(void)IEC104_Interrogation_Destroy(app.counter);
|
||
(void)IEC104_Interrogation_Destroy(app.interrogation);
|
||
(void)IEC104_Slave_Remove_Station(slave, &app.station);
|
||
(void)IEC104_Slave_Destroy(slave, NULL);
|
||
return EXIT_FAILURE;
|
||
}
|
||
app.clock_system = clock_system;
|
||
result = IEC104_Slave_Init(slave, &config, &error);
|
||
if (result != IEC104_TCP_OK) {
|
||
fprintf(stderr, "Init failed: result=%d stage=%d socket=%d\n", result, error.stage, error.socket_error);
|
||
/* Init失败仍须释放已创建的业务模块和Slave槽。 */
|
||
(void)IEC104_Interrogation_Destroy(app.interrogation);
|
||
(void)IEC104_Interrogation_Destroy(app.counter);
|
||
(void)IEC104_ClockSynchronization_Destroy(app.clock);
|
||
(void)IEC104_Command_Destroy(app.command);
|
||
(void)IEC104_Slave_Remove_Station(slave, &app.station);
|
||
(void)IEC104_Slave_Destroy(slave, NULL);
|
||
return EXIT_FAILURE;
|
||
}
|
||
/* 监听成功后取得系统实际绑定的端口，不能把配置中的0当作可连接端口输出。 */
|
||
if (IEC104_Slave_Get_Status(slave, &status, &error) != IEC104_TCP_OK) {
|
||
exit_code = EXIT_FAILURE;
|
||
goto cleanup;
|
||
}
|
||
/* 第3步：安装仅置标志的信号处理器；真正的资源关闭仍在主线程执行。 */
|
||
(void)signal(SIGINT, Example_Stop);
|
||
(void)signal(SIGTERM, Example_Stop);
|
||
started = GetTickCount64();
|
||
printf("LISTEN %s:%u CA=%u\n", config.bind_address, (unsigned)status.bound_port, (unsigned)common_address);
|
||
fflush(stdout); /* 让终端或通过管道启动本程序的测试立即取得实际监听端点。 */
|
||
while (!example_stop && (run_ms == 0U || GetTickCount64() - started < run_ms)) {
|
||
/* 有待续读通知或可立即提交的任务时安排0等待；WAIT则交回网络循环，等待上限50ms。
|
||
* Poll还会按库内本地工作和协议期限缩短等待；50ms只约束等待，不保证整轮执行耗时。 */
|
||
uint32_t wait_ms = Example_Wait_Time(&app, 50U);
|
||
result = IEC104_Slave_Poll(slave, wait_ms, &error);
|
||
if (result != IEC104_TCP_OK) {
|
||
/* 客户端普通断线由事件表达；这里收到的是服务接口失败，结束循环统一清理。 */
|
||
fprintf(stderr, "Poll failed: result=%d stage=%d socket=%d\n", result, error.stage, error.socket_error);
|
||
exit_code = EXIT_FAILURE;
|
||
break;
|
||
}
|
||
/* 先消费状态变化再推进业务；Drain失败会短路，不继续对不可信状态提交应答。 */
|
||
if (!Example_Drain(&app) || !Example_Step(&app)) {
|
||
fputs("Application event/build failure\n", stderr);
|
||
exit_code = EXIT_FAILURE;
|
||
break;
|
||
}
|
||
}
|
||
cleanup:
|
||
/* 第4步：停止应用任务，再结束网络；取消只丢弃尚未提交完毕的任务，不重发已接手数据。 */
|
||
Example_Cancel(&app);
|
||
/* Cancel只将终结通知排队；释放业务实例前必须读完，并清理应用自己的遍历状态及资源。
|
||
* 遥控FINISHED在离线时仍可读；这里只释放已同步完成的模拟输出，真实设备须自行等实际结束。 */
|
||
if (!Example_Drain_Business(&app) || !Example_Drain_Counter(&app) || !Example_Drain_Command(&app)) {
|
||
exit_code = EXIT_FAILURE;
|
||
}
|
||
if (IEC104_Slave_Close(slave, &error) != IEC104_TCP_OK) { exit_code = EXIT_FAILURE; }
|
||
{
|
||
IEC104_SlaveEvent_t event;
|
||
IEC104_TcpEventResult_t next;
|
||
/* Close保留收尾通知。对时和遥控只消费非I帧状态，不再受理请求或执行动作。
|
||
* 即使Cancel已经终结事务，也须交付断线通知让模块清除会话；首次终结原因不会被改写。 */
|
||
while ((next = IEC104_Slave_NextEvent(slave, &event)) == IEC104_TCP_EVENT_READY) {
|
||
if (app.clock != NULL && event.transport.type != IEC104_TCP_EVENT_I_FRAME &&
|
||
IEC104_ClockSynchronization_Handle_Event(app.clock, &event) ==
|
||
IEC104_CLOCK_SYNCHRONIZATION_EVENT_ERROR) { exit_code = EXIT_FAILURE; }
|
||
if (app.command != NULL && event.transport.type != IEC104_TCP_EVENT_I_FRAME &&
|
||
IEC104_Command_Handle_Event(app.command, &event) == IEC104_COMMAND_EVENT_ERROR) {
|
||
exit_code = EXIT_FAILURE;
|
||
}
|
||
}
|
||
if (next != IEC104_TCP_EVENT_EMPTY) { exit_code = EXIT_FAILURE; }
|
||
}
|
||
if (!IEC104_ClockSynchronization_Get_Status(app.clock, &app.cs)) { exit_code = EXIT_FAILURE; }
|
||
/* Close期间新产生的终结仍需读完；刷新统计后才能Destroy，不能用Destroy代替FINISHED清理。 */
|
||
if (!Example_Drain_Command(&app) || !IEC104_Command_Get_Status(app.command, &app.command_status)) {
|
||
exit_code = EXIT_FAILURE;
|
||
}
|
||
/* 只有关闭且FIFO读空后才能归还槽；清理失败也必须体现在程序退出码中。
|
||
* Command还要求事务/独立应答全部清空；应用站点引用已在FINISHED分支释放，再Remove_Station。 */
|
||
if (!IEC104_Interrogation_Destroy(app.interrogation)) { exit_code = EXIT_FAILURE; }
|
||
if (!IEC104_Interrogation_Destroy(app.counter)) { exit_code = EXIT_FAILURE; }
|
||
if (!IEC104_ClockSynchronization_Destroy(app.clock)) { exit_code = EXIT_FAILURE; }
|
||
if (!IEC104_Command_Destroy(app.command)) { exit_code = EXIT_FAILURE; }
|
||
if (IEC104_Slave_Remove_Station(slave, &app.station) != IEC104_STATION_OK) { exit_code = EXIT_FAILURE; }
|
||
if (IEC104_Slave_Destroy(slave, &error) != IEC104_TCP_OK) { exit_code = EXIT_FAILURE; }
|
||
/* 打印应用提交统计；这些值不用于推断未确认帧是否已到达主站，也不作为自动重试依据。 */
|
||
printf("STOP submitted=%lu gi_submitted=%lu waits=%lu rejected=%lu cancelled=%lu overloads=%lu deactivated=%lu timeouts=%lu negative_submitted=%lu dropped_requests=%lu counter_submitted=%lu counter_completed=%lu clock_executed=%lu clock_synchronized=%lu clock_submitted=%lu command_selected=%lu command_executed=%lu command_completed=%lu command_submitted=%lu command_returns=%lu\n",
|
||
app.gi.submitted + app.other_submitted, app.gi.gi_submitted, app.gi.waits,
|
||
app.gi.rejected + app.other_rejected, app.gi.cancelled + app.other_cancelled,
|
||
app.gi.overloads + app.other_overloads, app.gi.deactivated, app.gi.timeouts,
|
||
app.gi.negative_submitted, app.gi.dropped_requests + app.other_overloads,
|
||
app.ci.submitted, app.counter_completed, app.cs.executed, app.cs.synchronized, app.cs.submitted,
|
||
app.command_status.selected, app.command_status.executed, app.command_status.completed,
|
||
app.command_status.submitted, app.command_status.return_info_submitted);
|
||
return exit_code;
|
||
}
|
||
#endif
|