2b466b85f0
New read-only content page under 实时数据 → 开入开出 showing the board's
8 opto inputs (DI_A..DI_H, 合/分) and 4 relay outputs (KO6/TRIP/ERT/CLZ,
吸合/释放) as a 12-row list, 8 rows per page, 2 pages.
Data path reuses the existing de-bounced input poll instead of adding a
second hardware reader:
defaultTask (50 ms) → ioboard_di_snap_publish() → de-bounced snapshot
→ ioboard_di_snap_lookup() [new registration channel]
→ ui_data_feed_tick() (uiTask, 200 ms)
→ ui_data_rt_t.dio_di_* / dio_do_*
No new critical sections, no new hardware access on the UI path. Outputs
come from the volatile shadow register (a memory read, no lock).
Semantic honesty, recorded in ui_page_di_do.c and README §6:
· Output state is the software shadow register (ODR mirror), NOT a
mechanical contact feedback — this platform has no auxiliary contact
readback path. ioboard_do_read_level() also reads ODR, so comparing
the two is tautological.
· IOBOARD_DO_LEVEL_ACTIVE polarity has not been checked against the
schematic.
· Input bit order has not been verified by manual shorting. The
2026-11-16 run read 0x00 eight times because the operator had no time
to short each channel — the data path itself was fine.
· Board-level inputs are deliberately kept out of the 33-point telemetry
bitmap (IEC 104 point-table semantics); the two have no mapping.
Invalid snapshots render "--", never 合/分 or 吸合/释放: painting "no data"
as "all inputs released" would tell the field the inputs are open when we
simply failed to read them.
Board-verified 2026-11-16: page 1 shows 分 on all 8 inputs, page 2 shows
释放 on all 4 outputs, page footer and paging correct. Input bit order
still pending manual shorting.
Also: regenerate ui_font_cn_12 for 吸/释, add golden references for both
pages, align check_menu_rows.py L2 geometry with the now-4-item submenu,
and register the new source file in both the Keil project and CMake.
Reviewed independently; zero blocking findings.
27 lines
778 B
C
27 lines
778 B
C
/*
|
|
* 模块名称:UI Page DI DO (开入开出内容页)
|
|
* 模块功能:实时数据 → 开入开出 叶子的内容页声明——向框架 ui_content_page 提供页面描述符
|
|
* 适用平台:STM32F407ZGTx / PC 模拟器(两端共用)
|
|
* 作者:王建锋
|
|
* 创建日期:2026-11-16
|
|
* 修改记录:
|
|
* v1.0 2026-11-16 DTU 项目组 创建(8 路开入 + 4 路开出只读状态页,12 行 / 8 行每页)
|
|
*/
|
|
#ifndef UI_PAGE_DI_DO_H
|
|
#define UI_PAGE_DI_DO_H
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
#include "ui_content_page.h"
|
|
|
|
/* 页面描述符(定义在 ui_page_di_do.c;生成物按菜单树 #page=di_do 引用本符号) */
|
|
extern const content_page_def_t ui_page_di_do_desc;
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* UI_PAGE_DI_DO_H */
|