wandering1/STM32F4-Base
1
0
Fork 0
Code Issues 30 Pull Requests Actions Packages Projects 2 Releases Wiki Activity
Files
301c3e5183898d63e484ec6a756180f86b2da610
STM32F4-Base/scripts/id_aliases.json
T
wandering1 301c3e5183 feat(门禁): 编号门禁 id-check 落地（36→37 钩子）+ 批 1 编号单词化改名 
新增门禁本体
- scripts/check_ids.py：实现 docs/编号规范.md §8 八项校验；默认 warn-only，
  唯一硬拦项是「可判定比例跌破基线」（防回退的本体）
- scripts/id_registry.json：66 个前缀族，逐项来自 §4 总表 + 全库实测游标，
  偏差一律写进 cursor_note，不凭记忆编造
- scripts/id_aliases.json：旧号 → 新号 / 作废标记（照搬 section_aliases.json 范式）
- 顺带收编 check_test_traceability.py：正则补齐大写后缀与无模块码形态，
  比对范围扩到 test/host 与 7 篇「单元测试说明.md」，另加 --board-only 回退旧口径

批 1 改名（用户授权解禁「不改写存量号」）
- 代码规范条款 S1~S19 → CODE-RULE-nn：78 处 / 2 文件
- UI 像素回归状态 S0~S7 → MENU-STATE-nn：61 处 / 3 文件（冻结在 07）
- 两族属主登记处 = 脚本自身的规则表 / STATES 表，文档只作引用方
- 新增 scripts/rename_ids.py（§7.3 规划脚本）：映射表驱动、显式 scope、默认干跑、
  自动写 scoped 别名，跳过 [示例]/[计划] 行与变更记录表，按原字节读写保 BOM 行尾
- 已应用映射表存档 scripts/rename_maps/batch1.json 作审计轨迹

有牙实测（证明门禁不是空转）
- 注入 Z-99 / 裸形 / 悬空 / 越游标 / 未紧邻 / 跨文档重复定义 六例，
  分别被校验 1/2/3/5/6/4 点名，--strict 退出码 1；临时档删除后工作树干净

验证与同步
- 可判定比例基线 82.3% → 82.7%（已 --update-baseline 入档）；错误级 1312 → 1291
- ci_local.py 全绿（L0 + L0.5 共 1104 断言）；ui-golden Passed；
  check_doc_links.py --all 无法判定 0
- 未改任何 C/H 源文件，故本次不需 @build
- 文档：AGENTS.md 与 pre-commit使用说明.md 计数 36→37 并新增 §2.25 详解；
  编号规范 §4.1 补两行、§8.1 落地记录、§8.2 规范与仓库偏差、§8.3 迁移批次记录
2026-10-21 09:33:54 +08:00

300 lines
14 KiB
JSON
Raw Blame History

{
"schema": 1,
"generated_from": "docs/编号规范.md §7 迁移映射 + §4.3 冻结前缀；本表只登记**仓库里已实际出现**的旧字面量 → 现行字面量，不做尚未落地的批量改写（§7.2 阶段 1 一律保留存量）",
"note": "旧号引用不因本表而改写：本表只让门禁把「旧号引用」判成可解析（校验 3 悬空引用 / 校验 4 重复定义）。批量改写属 §9 阶段 1，须逐批 dry-run + 三重复核（§7.3）。 带 scope 的条目只在所列文件内生效（同一裸形字面量可能属多族，全局别名会把真撞号洗成已解析）。 带 scope 的条目只在所列文件内生效（同一裸形字面量可能属多族，全局别名会把真撞号洗成已解析）。",
"aliases": {
"N-31": {
"to": null,
"status": "void",
"note": "2026-10-11 的 Phase 7 复跑项已随销项消失；2026-10-14 同号被新条目复用造成撞号（docs/任务规划/README.md §0 注）→ 历史引用指向旧条目，新含义一律改语义标识"
},
"N-32": {
"to": null,
"status": "void",
"note": "监听生命周期模块化条目已销项，但被 docs/网络/ 三篇与多处代码注释引用（docs/编号规范.md §1.2 列为悬空引用实锤）→ §7.2 待处置：改指 docs/网络/网络自愈架构设计.md §9.3 或就地展开"
},
"N-33": {
"to": null,
"status": "void",
"note": "栈余量收口条目已随 M1 台架闭环销项（2026-10-12），登记簿行已删，结论在 docs/内存管理/RAM使用分析与优化方案.md §1.4"
},
"N-30": {
"to": null,
"status": "resolved-in-place",
"note": "sock_reset 原语收口受阻项：登记簿行仍在（2026-10-14 建档），编号规范 §4.1 误记为已销项 → 以登记簿为准"
},
"Trap 19": {
"to": null,
"status": "void",
"note": "从未存在的陷阱号被 docs/测试说明/CH395F_Test_Guide.md 引用（§1.2 / §7.2：删除或改指实际条目）"
},
"PHY": {
"to": "NET",
"status": "module-code",
"note": "§6 废止模块码：TM-PHY-01~11 → TM-NET-01~11（历史文档不回改，新文档按 §6 表）"
},
"NAND": {
"to": "GD5F",
"status": "module-code",
"note": "§6 废止模块码：TC-NAND-* / TM-NAND-* → GD5F"
},
"S0": {
"to": "MENU-STATE-00",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S1": [
{
"to": "MENU-STATE-01",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-01",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S2": [
{
"to": "MENU-STATE-02",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-02",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S3": [
{
"to": "MENU-STATE-03",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-03",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S4": [
{
"to": "MENU-STATE-04",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-04",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S5": [
{
"to": "MENU-STATE-05",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-05",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S6": [
{
"to": "MENU-STATE-06",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-06",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S7": [
{
"to": "MENU-STATE-07",
"status": "renamed",
"scope": [
"simulator/tests/check_menu_rows.py",
"docs/UI设计/UI_自动化测试流程.md",
"simulator/README.md"
],
"note": "批 1：UI 菜单像素回归状态号单词化（S0~S7 = 按键序列状态 → MENU-STATE-nn）（scripts/rename_ids.py 批：族 MENU-STATE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
{
"to": "CODE-RULE-07",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
],
"S10": {
"to": "CODE-RULE-10",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S11": {
"to": "CODE-RULE-11",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S12": {
"to": "CODE-RULE-12",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S13": {
"to": "CODE-RULE-13",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S15": {
"to": "CODE-RULE-15",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S16": {
"to": "CODE-RULE-16",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S17": {
"to": "CODE-RULE-17",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S18": {
"to": "CODE-RULE-18",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S19": {
"to": "CODE-RULE-19",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S8": {
"to": "CODE-RULE-08",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
},
"S9": {
"to": "CODE-RULE-09",
"status": "renamed",
"scope": [
"scripts/check_coding_standard.py",
"docs/代码规范/pre-commit使用说明.md"
],
"note": "批 1：代码规范条款号单词化（S1~S19 → CODE-RULE-nn）（scripts/rename_ids.py 批：族 CODE-RULE）｜旧号仅在本批 scope 内指向新号；scope 外同字面量属其它族，不受本条影响"
}
},
"id_aliases": {}
}
Reference in New Issue View Git Blame Copy Permalink